Very much appreciated..... I rebuilt mine last night and it runs perfectly (after seeing your second video lol). Thanks again you saved me over $600..........

Nicely done. Very informative.

great video! im sure you saved a bunch of people a tun of money. and thats needed and well appreciated in this economy.

What parts do you need for your rebuild, just seal or all the internals. Ebay was the best spot for the seals for me. but the internals are best from the Manufacture call them and they will tell you where to get them or sell them to you over the phone.

Why did you re-seal this pump? did it have visual leaks or is it possible that it was sucking air because seals were bad with out a visual of the problem. I have one that all the internals look good. I have not replaced the seals until i know that is what the problem is. It seems to be a cavitation problem. Still researching the problem.

glad I could help

Regarding removing the pump drive pulley in order to remove the pump from mower. Is that pulley attached with a taper lock bushing?

can you replace only the outer shaft bearing without complete disassembly? My pump # 106-9470

How do you find the internal parts? What manufacturer? Dixie Chopper? Or the pump company? How do you call the manufacturer for pump parts?

where do you get the rebuild kit ?

Where can we order parts I got chatter a and pressure issues more chatter under more load.

hope that helps.

look at the pump and go to the pump manufacturer for parts, but seal you can get just about any where.

Hi.. just bought a secondhand Scag Wildcat which seemed to be in pristine shape. Got it home and of course it leaks :( It appears to be coming from the union of the top and bottom "halves" (quotes because I know the bottom is longer). I am hoping it's not the shaft seal because I'd hate to have to pull the whole thing apart already, but I noticed you didn't change the case seal. Do those tend to go bad, and/or is there any other special reason mine might be leaking from there? It did get bounced around a bit on the ride home, but nothing I wouldn't expect from regular work. Thanks!

How many hours do you get out of these pumps, assuming they are properly maintained?

I have a Hydro Gear BDP 10A 307 It is on a walkbehind mower that fell off of the ramps as I was taking it off the truck and bent the rod or whatever it's called that sticks out over the wheels and that's where it is leaking. Do I repair or replace? Thanks

I could Visualy see a leak but if you have a vacume problem you should be able to see air bubbles in your oil reserve. hope this helps you out.

Where do you get the rebuild kit from?

I have a scag mower with a hydro pump that moves to 3/4 position easily and after has a hard time opening all the way When the power is off it moves freely Do you know what could be causing this Thanks

How much did it cost to do a rebuild vs replace?

Helpme please i need Fix my scag 48" to make straight stripes

thanks for your comment. I do have some minor bubbles and it may just be enough to cause my problem. The cylinder block is smooth on top and i am trying to find out if it should be smooth causing a lost in pressure or should it be raised to create a tighter seal at the value plate. I can run in reverse just no forward drive.

I have a rounded hex head bolt on the diamond shaped cap that I can not remove, but I know it was installed backwards. What can I do to remove that cap?

You still rebuild these pumps?

My mower was working perfect but my hydro pump was leaking so I changed all the gaskets/seals on the left pump. I got it all put back together and now the wheel doesn’t want to move forward or backwards. Any advice to look for?

bypass valves get seized all the time because they never get used but it will turn just put some wd-40 on it over night.

Too much of the assembly is missing from this video?

This one here need new seal's all the spec for this model can be found on the hydro web site.

add link to my info above

I seen 100s of videos & i don't see any Mecanic working on a dixiechoper mower. Or Maybe cuz chopper hardly ever breaks.i m a dixiechoper fan.

You need to be wearing rubber gloves because you don't want to get body oil on any of the parts

Nice.( { >

You didn't actually show replacing the seals. So it was a waste of my time.

δε το χει με τιποτα