HYDRONEER 2.0 | LOGIC | HOW TO BUILD A WORKING AUTO SMELTER

Рет қаралды 13,777

Күн бұрын

LET ME SHOW YOU HOW TO BUILD A COMPLETE WORKING AUTO SMELTER USING LOGIC!
HYDRONEER 2.0 | LOGIC | HOW TO BUILD A WORKING AUTO SMELTER
In this video i will show you how to build the ultimate fully working auto smelter with a reset, thats right no manual work needed!
****************************************************************************
Hello everyone and welcome to my KZfaq channel.
My name is Aidan also known as here on KZfaq as Kryptonite, I am A bearded gamer/content creator from the united kingdom, i have had a love for video games for as long as i can remember, I prefer to play lots of RPG, simulation and survival games.
My content will consist of tips and tricks videos as i love to share my findings to fellow like minded gamers to help them enjoy and benefit the games full potential and to mainly make everyones lives a little easier as we all know these times of games can be challenging, i will also be providing lets play content.
I hope you all enjoy the content and i hope to get to know you all a little better and hope we can all become a nice fun loving community!
Thanks for Watching!
*************************************************************************
Thank you for all the support and see you in the next video!
SUBSCRIBE HERE: / @krypt0nite
SOCIALS
DISCORD: / discord
TIK TOK : / kryptonite_spg5
INSTAGRAM: / kryptonite_spg
TWITTER: / kryptoniteaidan
TWITCH: / kryptonite_spg
FACEBOOK: / kryptonitespg
HYDRONEER 2.0 UPDATE IS HERE AND I AM SO EXCITED TO PLAY THIS GAME AGAIN!
so much has changed in this new update and i am so glad to be back into this game, the dev team is only small but they have listen to its fans so well and have implemented a whole load of new changes including some game mechanics, for a small team they have certainly outdone them selves and i am so excited to see what has changed and how much more funt his game could be.
ABOUT THIS GAME
HYDRONEER
Hydroneer is a mining sandbox game where you dig for gold and other resources to build massive mining machines and a base of operation. Use primitive tools, hydro-powered machines, and player-built structures to dig and evolve your operation in this tycoon-style progression system.
DIG DEEP
Using a state-of-the-art voxel based terrain system, you can create cave networks, quarry pits, or even mud mountains. Discover relics of the past in the depths of Hydroneer, with better rewards the deeper you dig.
CREATE
Hydroneer features a dynamic modular system for building structures and hydro powered machinery. Create the base of operations from your own design to optimise your work. Create networks of hydro pipes, control pressure. Craft resources, weaponry, and jewellery.
RIGS
Rigs are large hydro powered machines used for a variety of uses, from digging resources to transporting goods.
EXPLORE
Various parcels of land await you in the world of Hydroneer, each with their own advantages. Deeper pits, attractive scenery, and closer stores. You decide where to build your base of operations.
*****************************************************************************
#hydroneer #tutorials #kryptonite #simulation #gaming #mining
****************************************************************************
hydroneer automation,hydroneer auto smelter,hydroneer,hydroneer 2.0,hydroneer tutorial,hydroneer 2.0 how to start,hydroneer 2.0 guide,hydroneer hybridsteel,hydroneer tips,hydroneer 2.0 tutorial,hydroneer 2.0 hybridsteel,hydroneer 2.0 automation,hydroneer 2.0 logic,hydroneer beginners guide,hydroneer for beginners,hydroneer 2.0 tier 3,hydroneer 2.0 basic automation,hydroneer logic,hydroneer 2.0 auto repair,hydroneer smelter,hydroneer 2.0 smelting

Пікірлер: 45

@lagrange01390 2 жыл бұрын

I am French not speaking English. Thank you for your video on the subject which does not exist in French. It's very good that you did your editing on a large scale, it's easier to copy, I confirm that we can condense this editing well. If you can for your next video follow the path of your cable more and do not make a big circle with your mouse because without the text we are lost. Thank you I contiburais to follow you by the image pity that we have no translation.

@oswuldleofricvivadirr3839 10 ай бұрын

this is brilliant that explains just what i need to know to get my smelter up and running and i can use the same theory into my gem one too thank you

@Blaze_1961 2 жыл бұрын

Well done with the explanation! For testing it is a good idea to stress test it with dev tools (creative menu mod) there is a dev resource spawner that puts out a whole lot of ore quickly. If you can run a system using this item, you know it will work on any sized system someone builds. I've been looking for a working auto smelter video and I am definitely going to try yours out.

@Krypt0nite 2 жыл бұрын

Thanks you for your feedback, admittedly that is some thing I do need to start doing is stress testing things on a bigger scale, I appreciate you notifying me with you advice I will definitely be taking it on board

@alivissianos Жыл бұрын

Really good!

@catpack9554 2 жыл бұрын

cool idea with the reader as a reset.

@Krypt0nite 2 жыл бұрын

Thanks, I thought it would be the best trigger for a reset as the value will be the same 👍

@tobygreen7116 Жыл бұрын

Been trying to implement this into my factory and I decided to move from the start too south hope. The roller is fun

@Krypt0nite Жыл бұрын

I’ve got a newer slightly more compact version in progress 👍

@tobygreen7116 Жыл бұрын

Took me a few hours to get south hope setup now I have it working but the magnet does not prevent a few dropping through the furnace doors so it builds up then clogs.

@bobafettjr85 Жыл бұрын

@@tobygreen7116 I just built this myself and I found that removing the one second delay from the magnet works. I also have my magnet directly above the smelter though.

@DearMrDubs 2 жыл бұрын

Great 👍 job. A new sub 😊

@Krypt0nite 2 жыл бұрын

Why thank you 👍

@deathwhis401 Жыл бұрын

i thank you for the greater than logic info but i splitted the the same passing signal from greater than signal to be the reset with 3 s delay that i converted it to zero input by using ''dont pass nothing but 1 input'' and switch input 1 to zero.

@normangaskill1972 2 жыл бұрын

AWESOME JOB. !!!!!

@Krypt0nite 2 жыл бұрын

Glad I could help 👍

@futurevegan8617 5 ай бұрын

I'm just looking into this myself, but I wanted to say... Wouldn't it be easier to have a system where you have two keypads 1 - Selection and 2 - Quantity where it's not automatically making bars all the time? My goal is to have only a small cottage above ground where I can type 2 onto my first keypad and 2000 onto my second and then a 2000 lb gold bar drops into my furnace. It melts in the top part of the smelter, right?

@TocYounger 2 жыл бұрын

Ha! Guess who was literally just about to go mess around with auto smelting logic? Nicely timed. Do you find having the magnet on top results in spillage when dealing with large volumes?

@Krypt0nite 2 жыл бұрын

Haha! Well hopefully you can find a neat way of doing it if you have more than one smelter 😅 Yeah with just the one magnet I had above the funnel I had spillage, less having it on the conveyor belt, ideally with a high volume I would recommend having a couple of magnets spaced out 2-3 blocks apart Hope that helps

@TocYounger 2 жыл бұрын

@@Krypt0nite thanks man! Actually I ended up going with kind of a one, two combo on the magnets. The main one to pull stuff away from the funnel, then another at a right angle to the first, but on a 1 second delay. Huge reduction in the amount of junk spilled onto the floor! That said, I still appreciate your content!

@Krypt0nite 2 жыл бұрын

Sounds like a good way to do it to be fair, I just did a basic to allow people to experiment themselves, glad you have found a way that works for your build! I appreciate your support

@sloonam9742 Жыл бұрын

@Krypt0nite You did a great job on explaining the build, but why would this be particularly useful in a machine?

@DarkZed89 2 жыл бұрын

Nice video will try it but its pretty space consuming^^

@Krypt0nite 2 жыл бұрын

In this video it looks it but that’s because I was trying to showcase a bigger version so it was easier for people to follow and give others a chance to experiment and arrange it to suit their build 👍 Good luck on your build

@Gamering8482 Жыл бұрын

Since the magnet is before the two vertical conveyors, wouldn’t the materials on them keep going and clog?

@z3rk545 Жыл бұрын

Hi .... I followed this guide, idk, the magnet does not turn on and off, it keeps running, what i do wrong? I checked corectly build 3 times ..

@kendricklamote Жыл бұрын

Same. Can't get this to work.

@ats1075 2 жыл бұрын

can you tell me how it resets the smelter? I dont see how that resets in your build. Also any way to use a logic valve instead of a magnet ?

@Krypt0nite 2 жыл бұрын

Basically the smelter receives power when a condition is met by first reader, once this has been activated and sends a signal the value count has to be reset, this is done by the second reader once a resource passes pass and meets the value it sends a signal to the first reader and resets the value to zero and resets the system. Hope that helps You could use a logic valve instead leading to a pipe to shut off the water supply to either a drill/harvester/conveyor therefore turning the system off while smelting is taking place (I haven’t tested this as of yet) but I will let you know for definite or if you test before please let everyone know 👍 thanks

@margo2n995 Жыл бұрын

NICE GOOD GOOB GOOD LUCK FOR YOU!!!)))

@Blaze_1961 2 жыл бұрын

Also have you tried to shut the conveyor off with a logic valve instead of using a magnet?

@Krypt0nite 2 жыл бұрын

I have yes I should have mentioned that as an alternative method in my video to be honest, I just found the magnet to be more of a “flow” feel, with bigger builds I would incorporate both

@inskeepgaming Жыл бұрын

does this still work in 2.2? I built it and the magnets stay on at all times

@Krypt0nite Жыл бұрын

I’ve been having issues too since the 2.2 update I’m in the process of making this better and more efficient so bare with 👍

@jasonm8131 Жыл бұрын

I've just done this and it all appears to work nearly perfectly. The only issue I've run into is that the weight of the smelted bars are rounded up, so even if I put in 100 weight in the number pad, I will end up with, say, a 99.45 weight bar. Even putting in 101 weight, I've had it end up being under 100. 102 may be the magic number. I'm wondering if you're not seeing the same issue, and it's keeping the magnet on if the second weight reader isn't hitting the mark for the number you set, thus not releasing the magnet? Then again, I think that's what the 1 second timer dealio is for...IDK - I'm not great with all the logic, but it might be something...lol Either way, this is a super nice setup, especially for early-mid game.

@Krypt0nite Жыл бұрын

Thanks for your feedback glad this still all works perfectly even though it’s been a while since I done this video, and yeah the weights being rounded up can makes things in logic inconsistent but your are right in thinking that’s what the 1 dev delay is for 👍

@DeLaRafi. Жыл бұрын

wait? but the smelter dint reset? coz it need value zero to reset the molding and start to smelt again.

@DeLaRafi. Жыл бұрын

aaaa it got the 0 value to reset from the weight too.. ok ok nice

@Elemberg Жыл бұрын

your method is working, but if there are a lot of drills, then it doesn’t have time to close and work the magnet and part of the ore wakes up by, I decided it this way, before lifting I put 2 sorters, if you don’t put resources on them, then they just send every 2 resource to the side and it turns out that with a large flow, they divide the large flow into 2 streams, 1 goes to the melt, and the 2 stream goes to the beginning of the line and passes through the sorter again, which again divides them into 2 streams and due to this, not 2 flows enter the smelter 3 (or even more) resources at a time, and 1, and the next resource, when it rides, manages to grab the magnet and already with overflowing remelting, the resources are not lost (translated by Google,below is what I translated)) ............................................................................................................................................................................................................................................................................................................................. ваш способ рабочий, но если много дрелей, то не успевает закрываться и срабатывать магнит и часть руды просыпается мимо, я решил это так, перед подъемом я поставил 2 сортировщика, если на них не ложить ресурсы, то они просто каждый 2 ресурс отправляют в сторону и получается что при большом потоке они разделяют большой поток на 2 потока, 1 идет на плавку, а 2 поток идет в начало линии и по новой проходит через сортировщик, который опят их разделяет на 2 потока и за счет этого в плавильню поступает не 2-3 (а то и больше) ресурса за раз, а 1, а следующий ресурс когда едет успевает магнит схватить и уже при переполненой переплавке ресурси не теряются