Hyundai 2.0 spark plugs, how to replace them

Рет қаралды 25,112

Hyundai How To

2 жыл бұрын

how to replace the spark plugs on the Hyundai 2.0.

Пікірлер: 39

@nilayjordon Ай бұрын

I know you posted this video two years ago, but it saved me a huge headache today. Thank you for posting!

@andynex 6 ай бұрын

Wow man thank you so much for this vid! I seriously gave up when I got to that fourth coil and it pissed me off so much that the engine was designed that way in the first place lol. But then I randomly saw this video and was so happy you were showing how to get that damn fuel line out of the way lol. Was able to get all four spark plugs out finally after that. Thanks again!

@beachcity5627 Ай бұрын

George Michael song is classic plus I appreciate you explaining how to change spark plugs and ignition coil

@SNWEC Жыл бұрын

The best vid I've seen yet regarding this operation- great soundtrack also 👌

@loldev 10 ай бұрын

Thank you for your help that last coil was a pain but got there with your help

@Deryee123 4 ай бұрын

Thank you for the tip I was able to get the one under fuel line out also with a little muscle and little twisting and turning. Really appreciate it saved me a lot of time and spilled fuel.

@mrgump89 12 күн бұрын

Great video

@TommyG11814 2 жыл бұрын

Great tip on the fuel line , we have the same vehicle. Great videos.

@elizardoodriozola1275 Жыл бұрын

I got this car and I don't touch the fuel line. The assembly is hold by 2 bolts take them out and it will give you the space you need to take the plug out. On that one you will also have to unplug the cable they have a little clip pull it up and it comes out.

@thilayrapten8310 9 ай бұрын

thank you for your help

@kylepayant6903 11 ай бұрын

Bro you’re the best! Thank you for pointing out the last coil being in the way for the fuel line

@bo-js3tl 9 ай бұрын

I was able to get the coil out from under the fuel line without removing it, you just have to flip over the safety clip on the line first. Otherwise good video

@alfonsosolano2089 8 ай бұрын

Which safety clip? The one he just flipped out of the way?

@bo-js3tl 8 ай бұрын

@@alfonsosolano2089 yes the one on the fuel line

@alfonsosolano2089 8 ай бұрын

Thanks! I was able to do it also!

@twins3007 5 ай бұрын

Bro how did you turn the coil pack ??

@Deryee123 4 ай бұрын

Thank you for the tip I was able to get it out also with a little muscle and little twisting and turning. Really appreciate it saved me a lot of time and spilled fuel.

@hungnguyen-bv6mk 10 ай бұрын

thank you very much.

@damianle8754 7 ай бұрын

Loving the music the background haha

@aquaman199 Жыл бұрын

Hmmm thanks,looks easy enough

@grandmastert01 Жыл бұрын

Thank you for this video I need to do my wife’s car

@bigobetancourt7493 2 ай бұрын

X gen. George Michael on the background 😉

@chrispolobatangueno3667 Жыл бұрын

Do you need to de pressurized the fuel lines or no need to do it? Thank you for sharing the video

@hyundaihowto Жыл бұрын

When you pull the fuel line it will spray a little. So pull it slowly.

@drew5992 Жыл бұрын

You dont

@grayfoxla Жыл бұрын

IS NOT NEED TO ADD ANTI SEIZE GREASE ON THE PLUGS...???

@elmoorange Жыл бұрын

HI, I NEED spark plug socket size FOR HYUNDAI KONA N LINE 2022 1.6 AWD, THANK YOU

@hyundaihowto Жыл бұрын

5/8

@hubertfruzia1803 Жыл бұрын

Where is your rubber house, to easy to mess up the iridium tips .

@goin_ben Жыл бұрын

What if the gas line doesn’t come as your using the screw driver and pulling it?

@hyundaihowto Жыл бұрын

Its a push pull. Push in then pull back holding the plastic end against the line as pulling back.

@goin_ben Жыл бұрын

@@hyundaihowto I was doing that and it still wasn’t releasing

@theindooroutdoorsman 9 ай бұрын

There was no reason to leave that line over the damn coil pack like they did. Automotive engineers just live to make people suffer, I swear, bunch of sadists. There anyway to drain the fuel out of it before taking the line off?

@grayfoxla Жыл бұрын

ALSO.... IS JUST HAND TIDE THE PLUG...NO MORE THAN THAT...???

@drillingmachine Жыл бұрын

Yeah, heads are aluminum, just do a tiny bit more than snug and it should be fine. Do not over-tighten, and use a little bit of anti-seize thread compound, but careful not to get it anywhere beyond the threads.