Hey! The box looks familiar! Thanks for sharing it 🤗

Boys never grow up, only the toys change and become more expensive. Enjoy it :-)

15:34 The strip of foam with the adhesive - goes in the inside of the clear dome cover, on the left side - it's because the chain track that holes the filament bowden tube and connection wires - bumps into the dome and some people don't like the noise it makes, so this piece of foam silences it a little to a low thud. you can also remove the cover when printing PLA (I personally do not) or print a riser or a riser and chain riser combo unit that has a groove for the chain to keep moving out of hte top of the printer.

I thought when I saw the title this would be more of an ad but I really liked the video and how you incorporated the sponsorship with your own business to give new ideas. Thanks!

Hi, I did print 2 of these... in a smaller size about 150mm large... really cute!

I'm currently 3D printing some speaker spikes in TPU to make my studio setup look a bit tidier. Not bad prints! Bit of advice: Temperature control is very important. You can have the exact same filament type (i.e. PLA) and size, but one by a different manufacturer will print differently at the same temp, so you need to figure that out. Even +/-5°C difference can make a huge difference in print quality. Also, I've found out black filament tends to absorb heat a lot better, so slightly lower temp for that vs white filament. Makes sense because darker colours absorb heat a lot faster than lighter colours. There are some settings like "initial layer height", as well as how slow to print the first few layers for proper bed adhesion and quality of print. Usually the first few layers are done slower, but it's something you can likely tweak. Hell, you can probably tweak everything! The slicer you choose also changes how the print turns out. I guess you're using the in-built one? I use something called "Ultimaker Cura". It's a great slicer with tonnes of options you can tweak to perfection for your specific setup. If you ever want any advice on 3D printing or want to see how I print using my Ender 3, just pop down. I'll put the kettle on. :) Just down the road anyway!

just got the K1C printer today (also my first 3D printer). I will definitely be giving this tool kit box a go when it is all set up and running

It´s amazing!

just been catching up with all of your videos and has inspired me to shadow foam out my tools i am an apprentice love the content

Got My K1 a couple of weeks ago and love it. now I’ve seen that case might have to make it although think would need top foamed just to look proper.

Great video...thanks for sharing

I have 2 Creality Printers and I'm really happy with both of them.

The tool wall I posted on your FB group was 3D printed. A combination of internal support struts and an outer shell. The shells have a white filament for the first 3 layers to act as the diffuser then a colour change for the rest. Then the obligatory shadow foam inserts for the tools.

Well colour me interested. I want to do insert trays, so I can use my tools on the road but have two layers of tools, not just one. Printing cases and such would be awesome.

When I get my 1st 3D printer, Ill be printing: Laptop feet, Mikrotik router black mounting case, 'C' cups to make slising draws under my desk for small items, tool holder for when i solder, single to dual screen mount for my existing single arm screen mount, tool box's for small tools.

I have 4 3D printers now and am hooked. Lol. They are amazing and have come such a long way in the last few years. My latest purchase was a k1 a few months ago. And i have moded all my printers as well. Once you get more comfortable with 3D printing and software you can then root your k1c and install full fluidd and unlock klipper software and get its full potential. You will see how much more control you can get once you root the printer. And that foam strip is for the lid. It goes on one side. If you watch the creality youtube unboxing video you will see what i mean and where it goes.

Great Video, I got in to 3D printing a few years back, I have printed all sorts of things from Phone holders to power tools battery holders, I use fusion 360 to create my designs. Enjoy your 3D printing. 😀

Cool box

I think the rubber piece is for the door, to stop noise due to vibration.

Would you suggest the k1c or the flashforge 5m pro? They are the same price for me.

Stripe glued to the inside of top lid - left vertical side if look from front - It prevent damage of strike of cable chain on high speed printing.

I have been 3D printing for about 10 years. My new K1C is on the way from Amazon, due here on saturday the 3rd of Feb.

So cool

id recommend getting orca slicer i've been using it with my k1

Pls can you do more videos on your 3D printer and incorporating these builds into your shadow foam layouts 😘

First thing I’d be doing is printing a lid spacer never mind the tool box - Very happy with my K1 and waiting on the K1C-Max (bound to be later this year)to step up quality and material options

Hi, Are you using orcaslicer with your Creality K1C?

You should make a case for your cutting kit

The adhesive foam strip goes along the left side of the top lid. I keeps the cable chain from making noise against the lid.

you should use it to make custom cutting templates for cutting foam.

So with this printer, would I be able to if I’d like purchase a toolbox a tool set empty out the tools and just copy the toolbox and then I could just return everything give me my money back and then just have the case fire free? Would that work

My K1C is supposed to arrive tomorrow, though I doubt I will have any time during the week to really play with it (stupid adulting and work), though this toolbox may be one of my first prints, after the Benchy of course. Where'd you get the foam inserts?

The K1C is a good printer, when Creality give it multi filament printing capability it will be great printer and a real challenger to the Bambu Labs X1Carbon.

The Benchy got is name because it's a benchmark. Easy to remember that way.

Can you use the black foam the printer was packed in, or is that special foam?

cool!

Hi, does the K1c really need hyper filament or it can also use other creality filaments?

Can I print a flat and level bed plate for it, with itself, since it's Creality, and QA is non existent? It always needs mods anyway, it's a Creality.

Do you have a USA distributer for your Shadow Foam??

Just wondering, cost of the printer aside. What did it cost in filament to print the whole box? I know nothing about 3d printing but I'm looking for a new toy 🙂

I'm a service engineer. I travel by air all the time and I'm constantly struggling with my travel tool case (pelican 1535). I'm curious how well this foam holds up with the constant tossing around of checked luggage and 40lbs worth of tools and equipment.

why arent you using the built in camera?

If you Google, Reddit K1 adhesive strip, you'll find out what it's for. Apparently, it's in the manual 😅

I'm torn. The K1C seems to fix a lot of problems that I've heard about from the K1, but the Bambu Labs is just the more solid and proven machine. For only $100 more, I'm thinking P1S.

The creality store does not have replacement nozzles for this printer. I asked on the store chat and they have no idea when or if they will be available. This is a deal breaker

that rubber is for the lid so the chain doe's not scratch the lid

I have read too many complaints about units arriving broken and the customer not being able to contact customer support at Creality.

0:32 Have I been using Allen wrenches wrong my whole life or is this something you figured out one day?

There is not link for them bolts in the description as far as i can see there is links to the 3D printer if you can send us a link to them

the settings that come with the model are all ways set a bit fast.... slow the print speed down a bit mate it take a bit longer but it will print better...

My wife just walked in, Took one look at the screen and said....No. Im now looking for all the things i can print my son to justify the need for this...

oneBox edsie zgubil twoja paczke!!!

I think it could easily be done without using the M3 screws

So how was it free?

Well not quite free. The filament cost alone will be more than you would pay for this case in the stores 😂

FOR FREE ?

Did you shoot this content thanks to a sponsorship agreement? Did Creality give you this printer for free or did they pay you to shoot this video?

Benchy is a waste of time and material. Ive never printed it. Maybe im wrong, but that sticky rubber looks like a spare door sealer in case of disassembly cuz its hiding screws in frame

Got my K1C two weeks ago and after modest printing of simple toys and calibration models one of pulleys for lifting the bed got broken to pieces. Creality quality is not impressive, because I have no clue how a metal cast part can break because the main force is applied to it with a rubber belt. The rubber belt is more rigid than the metal part??