Thanks for the content Phil. Part of the fun in this is learning about how the numbers stack up so its a bit of a shame when you sell "within the family" if that means you keep that part to yourself. No closure :)

Lovely Jubbly, enjoying your videos, looks a tidy car when sorted.

Another good video Phil, in the current market most things are selling pretty well and fast; keep up the good work.

Living the dream! Should be an interesting fix this one. 👍

Good luck Phil ,nothing is impossible 👌🏻🤞🏻

Good buy that.. Did think it was more likely gearbox though, think clutch release bearings make the noise when you press the clutch in, but I'm not mechanic lol.

good find,tidy motor cheers phil.

Looks like a good flip for you 😀

Great project Phil. Was thinking lay shaft. But as typing you saying input shaft. Same dance really didn't think thrust bearing buddy 👍

Nice motor Phil. If you get the clutch done at mates rates it'll be a nice earner. I had a feeling that the 108 would fly out of the the door!

great flip if you can do the bearing phil ,always someone after a 4x4

Again Phil, good job mate. Detail and Content all good. Keep going mate!

Nice one Phil 👍 you do need a hat though 🤣 could be a cheaper fix if its the input shift bearing stay safe mate 👍 🍺

Could be a great steal, good luck Phil.

Hi Phil,this is a great car,.hat's needs doing and a good clean,it will make good money,

Great video Phil good buy and great car for someone should make a nice drink out of it 👍

Great vid great buy I think 👌🏼

Nice car Phil. Lovely spec. Should be easy to sell. Does sound rough. Lol.

Quick flip Phil. Well done mate. You’re right about the wind and your hair. I saw both of them blow out of place 😳. Keep them vids coming..

Hope it is what they say it is Phil save u hundreds and more profits for your next project. Keep it up mate 👍

Good flip good buy personally. I originally thought it sounded like a gearbox whine aswell as release bearing. Seems like you saved a few quid pal 👍

Phil you need some merch..serious about salvage cap would look good on you 😂😂

Good buy!

I like it, it’s a great looking vehicle with an iconic badge!!.

Nice motor Phil 😎 Should be a nice profit in it for you m8y 😀🍻👍🏻

It's useful that head Phil for tailgates and bonnets 😂

Input shaft bearing is that common a issue that was first suggestion

I've got a left hand drive Patriot with the same problem 😪 wait untill a bolt comes out the drive plate.... Total fun.... But to give credit to Mopar, once a new shaft bearing and driveplate bolt went in, it never gave me another problem untill the thermostat went out at 250k miles...

Nice car well done

Looks like a good buy

A Good buy and hopefully a easy fix for you. I quite like the car i don’t know why but I would drive it.

Nice bit of profit in that phil, good to see a variety of content too

Bargain that Phil, will make somebody a lovely motor when it's fixed 👍😎

Nice one phil

Phil that would be a brilliant car for £3500. Great car, great channel. 👍🏻👍🏻👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

Nice buy Phil, interesting content should be good viewing

My dad had 1 which he bought new back in 2008 a 2.4 petrol with startech extras had it 6 months and lost 12.5k on it and says its the best 12.5k he has ever spent getting rid of it. With 6k on the clock it had already had the clutch changed 2 twice. Both burnt out while trying to tow. 1 with a caravan the next one with an empty trailer. He did ask the dodge dealer to fit an uprated clutch and he would pay the difference as it was done under warranty but they would not do it. The lock indicators are factory standard ones the startech one's they offered were different. For towing my dad opted for something a bit more powerful and traded the jeep in for a new cayanne s 4.8 v8 back in 2009 which he has since changed in 2018 to a cayanne turbo.

Nice car, be good when it's fixed

Hiya, would you ever make a video sort of explaining the differences between copart and SYNETIQ and what you prefer? I may sign up to the latter next year along with copart but I am wondering on whether it’s worth it as people on trustpilot have a lot to say about things like stolen parts.

7:19 For a minute there I thought that bleeping was to hide your swear words.

Looks to be a bargain Phil, if that’s the only problem, awesome! Good content yet again.

Great buy Phil good bit of profit if that's all it is keeps you going making money to buy other cars for Channel 👍

Good result if it turns out to be input shaft :-) A lot of people knock these but like you say what car doesn't have issues. Shame it's a petrol though. I'd like a diesel Cherokee the later ones are really nice, keep looking on copart but nothing suitable :-(

I won’t be the clutch release bearing. My moneys on gearbox. Your test is the wrong way round. Release bearing makes a noise when you depress the clutch. Noises only there when you release the clutch means the input shaft is engaged and rotating. Ooops. Good luck though

Hi phil looks an ok car,but it certainly sounds like an input shaft bearing,which if i remember correctly is a fairly easy job to do and should work out a lot cheaper than a clutch and thrust bearing,hopefully as you said,should be a good profit on this one.One possibly down side may be the fact its petrol,road tax is going to be high do you think.

BTW sounds more like a first motion shaft bearing to me

Hi Phil,have you replaced bearing yet,if you have and its ok be up for sale soon.Best of look looking forward to see the outcome,by the how much is the tax on your Audi.

Bargain great work motor

I’m tipping gearbox bearing failure and not clutch related.... let us know if it was the clutch kit.

Nice easy flip Phil ££

More reliable than any range rover

Does look smart in Black... Fingers crossed for £1200 profit (or more) Fun Fact: I never realised the 2.0 Diesel option in these is a VW engine...

Sounds more like the gearbox , than the clutch , but I’m more than likely wrong 😂

Input shaft bearing maybe?

I think your clutch sounds like a gearbox!!!! Not a bearing.good luck.

👍👍

It’s definitely worth the £1200 mate, no matter what the experts say, you’re going to at least double your money anyway so it can’t be that much ov a stupid move can it 😁👍🏻

Hopefully not got dual mass flywheel as it sounds like that but either way be clutch and release bearing

Hi Phil that sounds like gearbox bearings.

Won't be a money pit if you are fixing and selling definitely nice little profit but not for everyone 👍

Be great having a go learn something new and what's the worst that can happen

Not my cup of tea, but a lovely little car for someone.

All caught up now nowt watch lol love the jeep where will you be selling it ???

The cable in the dashboard looks like the original iPhone/iPod cable (iPhone 4 and older)

Possibly dual mass flywheel?

Likely had a service but then abandoned when diagnosed clutch/flywheel fault

What's the catch - it's a Jeep Patriot!

Easy fix if it’s just input shaft bearing & you don’t have to remove the gearbox 👍🏻

Layshaft bearing .

looks like a few beers and a wage in that one

are you up illingworth way?

Money pit mate defo sounds gearbox to me good luck

nice motor bargain

That will sell like a hot cake once done phil. Look forward to the next video on this.

What a bargain in my opinion

Does the sun ever shine up there mate?

Looks a nice car for its age. Range Rovers are just as bad yet people buy them because they look nice. This car looks nice and not everybody cares if it requires fixing now and then. Everybody has a bad experience with a car.

Youd be mad to swap a merc for that , Jeep is linked to fiat and Chrysler through mergers . Mercs dont have the best reliability history . Low mileage could indirectly mean it's been owned by a coffin Dodger or been in the garage a lot.

Shame it's a petrol Phil as I think you would have kept it if it was a diesel.

I think it’s the gearbox Bearings

They put the bloody steering wheel on the wrong side mate...That's why it's so cheap🤣🤣

All these jeep patriot experts saying its the box lmfao

Richard court/Hatfield for parts

Just wait for all the KZfaq police to tell you off for not wearing your seatbelt 😂😂

Not the clutch, is gearbox

One year later and I can’t find the same car for under £3000 😭😭😭

Engine mounts...

Why dont you get a treilor instead of a recovery truck if your only picking cars up for yourself save on road tax

I don’t want to piss on your chips but release bearings are usually noisy with clutch pressed, that sounds more like the front gearbox bearing or lay.shaft bearing I hope I’m wrong. Good luck with it still a cheap Jeep.

Yeap dual mass on patriots 2.4 £300 for one

Phil's hair flapping in the wind....😂😂👶

They are junk Chrysler just chuck their cars together for the American market and hope they Last 3 4 years without the customer coming back

What hair 🤣👍

Clean title? It aint america

Trailor

Hair blowing in the wind !....you've got no f*****g hair ! Its gone ! .

What's a clean title? I'm English.....

First

1st shave ur head, 2nd quick fix n flip that horrible Jeep, get another car in ASAP 🤣