Wouldn’t be a vTuned video without the usual SamCrac paper weight making an appearance.

Might want to think about burying the power cable from the pole to the building so you don't catch it again or if you have an employee at some point when you get big enough and get your self a waste oil furnace.....old oil,trans fluid, brake fluid, power steering fluid, diesel,ect on things you have to have records of recycling/disposal is antifreeze and battery acid/ old dead batteries worked in the salvage/parts industry for 20+ years tires absolutely suck but it's part of the game best thing to do is not allow them to pile up I don't know what the cost is per tire now but last I knew was$1.25 per ....... have a covered area to store them so they don't fill with water and we would stack batteries on a pallet and when we got 40-50 we would bring them to the scrap metal place and sell them we were getting $5.00 a battery back then I don't know what it is now.there is money to be made with it... just look at LKQ... and all your buddies that are rebuilding vehicles should be using recycled parts instead of dealership parts..I mean somethings you have to buy new but it's a miniscule amount....oh and maybe get with your local scrap guy and see if they would put a couple 10-15 yard dumpsters in your yard......one for brake rotors and drums that's #1 prepared and one for core engines.... and old radiators knock the plastic tanks off and get them flat and stack them on pallets also.... just some knowledge sharing for you....or you can tell me to go shit in my hat..😂......👍👌

"save the engine" ?! you're a glass half-full kind of guy!!😁

I love that you all are smiling and having fun during the process

Congrats on the forklift, you SO needed 1. You can make all kinds of attachments to mount on the forks to haul, pull, or push vehicles around. When you lift from below you run the risk of damaging the undercarriage. I had a shop in a storage building and they had a piece that mounted on the front for moving around boats on trailers (ball). They also make great mobile frame racks. Press the forks against the frame and use the other end to pull. (you've already done this). They are great for removing truck beds too. Build a frame out of 2 x 4's that slip under the bed rail and up she comes.

Man you got lucky with the power line. Just me more vigilant when moving that heavy equipment

Awesome as always.Thanks for sharing and taking us along

That motor seems pretty far gone, but I love your enthusiasm!!!

Hi Ben, very interesting content. I'm happy to see the hard-working Jack with you again. Keep it up and good luck with your new business.

The mustang got left out to die again.

Love the different content from building a car to tearing one down for parts awesome love it

Will support you with whatever you post as you are a legend

13:16 "not that's not sketchy at all" lol

Funny, always enjoy the video !

Drill a hole in one of the forks big enough for a hitch ball and you can move anything that has a trailor hitch. You can also make some fork extensions out of rectangular tubing pretty easy so you dont puncture anything on the bottoms of your cars when you lift them.

Wow! This video had everything - a burnt truck, a new forklift, and some sketchy electrical work at the end! 😂 I can't believe you guys scored a diesel forklift for only $6000. That thing is a beast! Pulling the engine out of the burnt truck was pretty impressive too. I'm guessing you'll be able to sell a bunch of parts off of it to make some money back. Although, that burnt aluminum in the cab doesn't look too salvageable. Good call on not messing with rebuilding a truck with a certificate of destruction though. Unless you want a giant paperweight, that is! Can't wait to see what you guys do with all those parts and the new shop truck! Also, good luck getting the power turned back on! Maybe next time avoid the power lines with the forklift. 😉

Ben, you could strip the melted parts off the engine check it turns by hand then take heater plugs out, connect the starter motor too a battery pack and do a compression test on the engine, just an idea. I have used burnt motors before and been lucky, and i always do that test before refitting an engine wether its had a rebuild or just replacement and never fails. Just an idea but worth a go to know condition of that engine

Hello Veniamin, lovely work. I enjoy watching you, you're like grandson. The Forklift has Daewoo written all over it. Not Doosan, this was made before Doosan brought Daewoo heavy industries. Should be a solid forklift for many more years. Good, Veniamin.

Yesterday had so many uploads that I almost missed this beauty

Used to work alot on these type of forklifts. It's pronounced Daywoo. Cheers!

Maybe you should make a Jib for the forklift, could be good practice for welding

Yay Jake is here! Missed ya bud!

You should get you a couple of those cargo containers so you can put all your body parts in it

Check out a turbo max nozzle that attaches to your pressure washer wand. It delivers a much stronger spray!

Nice work 👏 👌

Forklift is clutch! Congrats Ben

Saludos desde 🇵🇷.Yo empecé a ver el canal por el Ford Mustang y todavía sigo esperando la continuación y conclusión del Mustang .No le vi sentido en parar ese proyecto.

tnx for the video

Koo koo jake back👊

you guys need some shop coveralls with the logo embroidered on the back.

You need to aquire a set of extra long forks for the doosan. Thanks for the great content! Cheers from Edmonton, Alberta, Canada

great vlogs and content!! please oh please get you a cat tail for the wind noise

its a DAEWOO fork lift and yes they are a good fork lift. nice job

Heat changes the metal properties. Can't reuse any heat damages.

Heat-treated frame rails 😊

Nice job. Any shop that does the heavy work you do, realizes the value of a forklift. IMHO, a forklift in these situations is no different than having a ratchet and sockets for the assembly. It’s necessary.

Looks like the transmission may be salvageable?

Yeah I can't wait till you get back on that mustang that thing is going to be a beast especially if you get a whole like text-to-speed and all them people or get it even get a hold of Cletus

15:25 that rolling chassis would be perfect for someone who bought a copart special with frame damage....

Definitely a lot of money in trucks. It's just hard to say how much of that engine is salvageable. But you guys know what you're doing 100%

I have my doubts about that engine being good, but the transmission should be OK. Good that the frame is still OK for your cousin.

Do you guys have a full steel recycle bin yet?

keep it up

Lot good parts on that truck.

Forklifts rule …man toys 💪 Ben’s chop shop lol always said there’s so much more money in taking them apart than building um up ..good on you dude you never stop working that’s what it’s all about 👍

Hi Ben, I think you pronounce Doosan as day woo ie: daewoo 😂, love your channel

Nice Video.

Not worth saving the engine, at best water has gotten inside from the intake so it will have rust in the cylinder walls and maybe bottom end also which isn’t right trying to sell it off to someone else, with the amount of heat around the outside just about every bolt on is knackered along with much more so it needs to be scrapped

number 1

V you should start looking for a empty property to start building V tuned huge warehouse/shop. good to see Jacob coming around

Need bring back your old wide body mustang

Need more chop shop vids😅

Wow V.T. Canada love Québec merci M T.L Montréal 😮

what's the updates on the burnt Ford pickup

bruhhh you should keep one of the burnt panels like patina. Adam LZ did that with his mustang it looks pretty cool!

Nice parts truck.

G'day mate how's it going

Vtune.. the transmission on the new is about 8 k . Used one 2000 is a steal for the person buying it

Number 7 🙌🏽😅

Doosan d30 is a great machine

Mashallah, honorable work.

I like that he’s wears a Judas garage jacket ! Supporting others !

I wonder if we’ll see the mustang running one day

even a 2018 is worth rebuilding but since it's for deconstruction only. You had no choice. I would of looked for another tuck and used this one for parts for the other. Could even be a badly rolled over one and this would of made a great parts truck. you should have a good frame. bed and maybe a cab from that truck. maybe the engine if it's not rusting in side from water being sprayed to put out the fire. the cylinders need scoped and the oil needs drained and the oil pan dropped to get all the water out. But if the cylinder walls are pitted it may not be worth doing anything with that engine.

Good for you Ben. What brakes? Brakes are for quitters. LOL Forklifts are a must for a body shop. They life beds off, pull cars and trucks around lift damaged suspension vehicles, and sometimes serve as a portable frame machine.

Hey Ben what is this black BMW M2, is it a parts car?

Paint it with a epic design on it

Why not a trac skid steer- better traction and versatile (interchangeable attachments

Poor Mustang rotting outside.

Next video needs to be you cleaning up that fork lift! It could use some TLC.

Super duties catch fire because the plastic fuel filter gets full of debrees that was filtered out the fuel filter cracks. I caught my leak in time because it was seeping at the seems.

The background tunes in your videos are vtuned

Nice job guys,fords are easy to tear down.get yourself a dump trailer and as your tearing vehicles down,throw the metal from the vehicles that you remove into the trailer,easier to haul to the scrap yard, and separate the aluminum from it,worth more.great video 😎😎😎👍👍👍

Get some fork extenders for when you want to move the vehicle that don't run and have flat tires.

V-tune over in England we call the forklift or its pronounced day-hoo or day-whoo

Im surprised you took it apart, as in pieces it takes up more room, and you could of stripped out the back and cab as parts sold, the engine was the main thing to check out first,

How many part trucks do you have now lol

Would have been a perfect truck to rebuild

V.T. why didn't you rebuild the F-150 cuz w/ front end work. You difntly had it.

How long do you take to rebuild a car like this if you only focus your time on this one car?

I really don't like burnt cars, even if they're rebuilt. So, the burnt smell never goes out. You should put in there, a very strong car freshener after rebulding.

Good idea ben parting vehicles out like that could be a nice business if you going down that ways bro and youd always have parts on hand jf neaded ever to!. 👌👌💪💪👍🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿

Great job !! Looks like the wife's feeding you well and taking care of you !!!😂

отличная покупка👍, за сколько купил этот форд????

The fork lift is a Day woo

I saw one of these trucks on the highway leaking fuel. I was behind him. I told him maybe he didn't listen.

Yes sure is!❤😂

The short-block should still be good if it’s cast iron? 🤔

Worst comes to worst, that engine could be sold as a core...and that's still good money on those.

Keep BEN AWAY FROM FORKLIFTS HE'S DANGEROUS 😂😂

Everybody.. All together now!.. MUSTANG! MUSTANG! MUSTANG! MUSTANG!

The paint job on that forklift should be a breeze! Lot of rust forming on that Mustang! I hope that will be worked on soon.

Too bad about the power line. Always something when you’re having fun.

2 things: Lifting straps & a freaking oil drain pan!

Would be cool if you and the Goonzquad crew could go in together and buy a closed down dealership. Would have work area, plenty of room for content, ability to have storage for used parts, and maybe employ someone to handle that, and a showroom for all of your cars for fans to see, and turn either the parts dept or an office into a storefront for your merch. And maybe once a quarter, have a day set aside for a fans meet and great

This engine is waaaayyy long gone

Gl with it brother, lets get it....working!👌👊💪💪💪

its a DAY WOO

😮 needs new tires

On your last 3 or 4 videos the audio has been really bad at times. Remote mics are cheap.