I Bought a FAULTY VQ Retro Mini for £6.95

I Bought a FAULTY VQ Retro Mini for £6.95 | Let's FIX It!

Рет қаралды 101,775

3 жыл бұрын

This broken View Quest DAB Radio was purchased from eBay, and I'm trying to fix it in this video. It doesn't appear to have any power and the LCD screen won't light up.
Let's see if we can FIX It?!
Hope you enjoy!
Steve
PS. I'm not an expert in repairs at all. I do this for fun, and it may not be the best or safest way to go about repairing broken stuff. I'm pretty good at melting plastic though. Please don't copy me - I'm an idiot.
SUBSCRIBE HERE: bit.ly/ssf-sub
SUPPORT ME on Patreon: bit.ly/ssf-patreon
FOLLOW ME on Facebook: bit.ly/ssf-fbook
The magic things I use to break stuff;
My soldering iron: amzn.to/2Isf360
My microscope: amzn.to/2VP3msU
My multimeter: amzn.to/2LjBgnN
My oscilloscope: amzn.to/2LUidAQ
My component tester: amzn.to/39mrzhY
Filming Equipment;
My camera: amzn.to/38IdR7s
My microphone: amzn.to/3rCriPc
My VO mic: amzn.to/3pz2c1L

Пікірлер: 131

@davidjoel3155 2 жыл бұрын

You know what I like about your channel? You, you are such a relatable character. There are other channels, but they soo technical (still enjoy their content), but there is some this relatable about this channel. Good work man. Am busy binging though all your past videos. Hope you continue growing!

@jimmyramkisoen191278 3 жыл бұрын

Hi Stez! I suspect that by reflowing the connections you resolved the corrosion which was acting like a resistor eating that 1 volt that the display needed. Nice video!

@StezStixFix 3 жыл бұрын

Thanks Jimmy! That is an excellent thought, you're probably right! I never thought of it that way, but a poorly soldered connection I suppose can reduce the current flow. 👍

@jasondoesthings919 3 жыл бұрын

A lucky fix is still a fix, great job. You tracked those traces down like a champ.

@StezStixFix 3 жыл бұрын

Thanks Jason, yep I'll definitely take it! You've gotta be in it to win it, as they say! (Not sure who "they" are) 👍

@jasondoesthings919 3 жыл бұрын

@@StezStixFix 😂😂😂

@anthonywenban7471 2 ай бұрын

Hi Stez, I think the large “vias” that you stuck your probe in to check the voltage was the problem, and when you stuck your probe in to measure the 2.6v you disturbed the copper just enough to make a connection, I would stick a jumper wire over it as the fault may come back!

@davidmasterton8823 3 жыл бұрын

It’s annoying to be searching for the problem and suddenly it’s working, on the plus side it is working 👍 good job 👍

@StezStixFix 3 жыл бұрын

Thanks David! Yeah, I'm still annoyed that I can't pinpoint the fault exactly. But, its still working perfectly and is a cracking unit! So, I'm happy with that!

@borisdg 3 жыл бұрын

I like your editing. Always makes me smile.

@StezStixFix 3 жыл бұрын

Thanks Boris! 😊

@guywilton7471 3 жыл бұрын

Loved the video - great to watch someone fault finding as it's no longer my day-to-day job anymore and at times I do miss it lol However....what I don't miss is doing all the work and not finding the fault, only for the bloody thing to function properly.....good result, but less satisfying Something I did wonder is if you'd be better measuring continuity not using the tone, but reading the resistance - I always got seduced by using the tone and chased faults that I could have seen earlier......& to be fair, the instructors did teach us not to rely on the tone during Technical Training Anyway..... I'm being a meddling old f*** and I don't mean to criticise and spoil your fun Keep up the great videos!

@StezStixFix 3 жыл бұрын

Thanks Guy! No, you're absolutely right. Relying on that beep has got me in to trouble a couple of times before! I'd love to find out the actual fault with this, but I suspect it's probably just a few dodgy solder joints from factory. I don't think the device actually worked after rolling off the production line (which would explain how it was in such good condition and still had the cellophane wrap on the handle) Not really that exciting, but I can't really think what else it could be! 👍

@juiceboxhero3576 2 жыл бұрын

Love the vids! Great editing, clear explanations, and attention holding content. Idk why your channel hasn't blown up yet! Also makes me wonder how much money I could be saving on stuff that I buy 🤔

@turks1966 Жыл бұрын

Reflowing the joints was the solution, thanks for sharing, very interesting to see you work through the problem to figure out how to fix these broken items.

@SimonEllwood 2 жыл бұрын

The connector with the dodgy pads should be stabilized. Glue on the component side (maybe hot glue) and adding additional formed lead clippings on the solder side can work wonders. The reason is that the contacts can break again especially on a portable device. I keep all the clippings from my components for jobs like this. Form them with pliers to act like the weak or broken tracks and scrape the track back beyond the loose copper. A lot of 1980s items fail on the connectors.

@dbracer 2 жыл бұрын

Definitely this. Also, the failure is probably caused by the socket not being pressed home properly before soldering. If it wasn't seated properly, the pressure from pushing home the plug could lift the tracks, as they're on the opposite side to the socket. If so, it would have been broken like this direct from the factory and only worked by luck in the first place.

@I_RacooN_I 2 жыл бұрын

Thank you Steve for taking us on such an amazing adventure..

@shawnwade302 2 жыл бұрын

I just subscribed to your channel today. I really enjoy your videos. I used to enjoy tinkering around with broken devices and toys. There are other repair KZfaq channels out there but many of them seem to be too serious and technical. You however seem like a regular guy a person could talk ,joke with and have a beer with while playing retro video games with. greetings from Iowa (Midwestern state of the USA).

@AtomicShrimp 2 жыл бұрын

The battery insertion bit was a lovely little detail. Love it.

@whatislovebutonelonggame5406 3 жыл бұрын

"Oh, it's working now..." way to go!~

@StezStixFix 3 жыл бұрын

🤣 thanks Wilbolg! ☺

@austinbishop2500 Жыл бұрын

Just fixed mine, it eats batteries so I only use the USB power supply, I've reflowed the 5v socket a few times now and I do agree the standard of soldering leaves a lot to be desired.

@takashiemota9784 2 ай бұрын

So glad Steve is still making videos.

@chris-pike 3 жыл бұрын

Good to see another of your fixes there Steve did this get you thinking what the problem was even though you fixed it !!! nice radio too and its now working - Nice 1 👍

@StezStixFix 3 жыл бұрын

Thanks Chris! Yeah, It's been bugging me since I fixed it, but I really think it was the dodgy factory solder joints. Looking at the excellent condition of the item, and the fact that it still had the plastic wrapping on the handle, I don't think it ever worked from leaving the factory. Reflowing the solder joints is what I'm gonna put the fix down to! 😊

@karmatingz5797 Жыл бұрын

great job Stez. I am kinda hooked on watching you repair DABs now. My problem is I cannot find why my power cable does not work, the batteries do, but not the power and nothing looks damaged. Cannot even find where to get spare parts....no cheap duplicates to buy (as yet!). But cheers this is good stuff.

@ragnabob 2 жыл бұрын

Love your videos man!!

@johanlaurasia 2 жыл бұрын

Recently found (and subbed) to your channel, very enjoyable videos.

@parisiadrian 2 жыл бұрын

Great video! On the minute 7:10 you have some colt solder joints probably that was your problem from a beginning. To fix those joints I like to add solder with lead. I'm subscribing to the channel!

@sio2y 2 жыл бұрын

I've had two of those. Had the same issue with both - the speaker quality degraded significantly over time, to the point that everything sounded like it was underwater. The DAB reception wasn't great either, but that could possibly have been the walls in my house.

@oldguy8177able Жыл бұрын

i understand your frustration,you want to know for future reference i guess you should reference what you remember doing and that all you can do.I think you did a fantastic job,I think most of us would be a bit overwhelmed.

@tamishaambriz2653 Жыл бұрын

Hi! I don't fix anything, but I find your content entertaining and fascinating! Do you sell the items that you repair?

@OidHunter 2 жыл бұрын

Brilliant purchase and investigation.. We'll done and I watched to the end 🙂 We have the same radio in blue which made me watch in case it developed the same fault in future. I'm shocked but shouldn't be surprised at the soldering workmanship.. VQ probably tried to find the cheapest electronics sweatshop factory in China 🙄

@dr_ned_flanders 3 жыл бұрын

Great fix. Well done.

@StezStixFix 3 жыл бұрын

Thanks Ned! 😊

@ToxoRetro 3 жыл бұрын

Looks like a cool little radio. Glad you managed to fix it Stez. Sure it would've been nice to know what the trigger was, but at least it was something you'd done correctly. Early in the video, I did think "will he note the polarity?" - you sure did. 👍

@StezStixFix 3 жыл бұрын

Thanks Toxo! Yeah, it's a cracking little radio and is working perfectly (I've used it every day since, and I'm made up with it!) 😊

@kennethbarker852 2 жыл бұрын

1st class video to watch thank you take care kind regards from me kenneth💟💟💟👍

@jwilko7998 3 жыл бұрын

Stayed to the end, well done that man, tip is to give it some good tapping around the board to try and make it go it to fault condition if it don't you have fixed it.

@StezStixFix 3 жыл бұрын

Thanks J! I've been bouncing it around and it's still working perfectly, and I've used it every day since. Really hope it stays fixed, and I think it will, I love this little thing! 😊

@eclectarama 3 жыл бұрын

Love it, young Steve.

@StezStixFix 3 жыл бұрын

Thanks Steve! 😊

@pappy601 3 ай бұрын

This video has an incredible thumbnail

@Jinxnator 3 жыл бұрын

And stezzzzy is on it again brilliant ❤️

@StezStixFix 3 жыл бұрын

Thanks Jinxy! 😊

@misterlobsterman 2 жыл бұрын

I work as the IT guy in a school, and they regularly bring me faulty... everything basically. Quarter of the time i fix them, i have no idea what i've done that helped. Yeah, it happens sometimes. Results are what's important :)

@Ratten86 2 жыл бұрын

How can someone charge so much for a faulty device, i wonder 🤷‍♂️ Btw, stubled across your channel just the other day and I love it 🤗

@coondogtheman 2 жыл бұрын

Those holes going through the board sometimes fail. Maybe bridging those two holes together will give a more reliable connection. I've reflowed solder connections on a variety of electronics and it has fixed many issues. It fixed a low power and cutting out issue on my old ghetto blaster boombox, I reflowed the main filter cap and the radio works better and is louder.

@dak2 2 жыл бұрын

Til the end my friend

@DigitalDiabloUK 2 жыл бұрын

As BigClive would say, looks like post QC degredation in Chinese build quality. I expect your 'working' one was when VQ were doing detailed inspections, and then the broken one was a much later one where the Chinese outsourcers had 'trimmed the fat' in production costs, as represented by that "ArtisAnal" solder quality. Either that or it was just a Friday afternoon one.

@simonlunt353 2 жыл бұрын

Good lad it’s what I call a bug bear when you can’t find out what you did to get it working but you did it so well done 👍 l still think these small companies are bloody too small 🤣 but I enjoyed watching your video stay safe 👍😊

@clivebradley2633 2 жыл бұрын

I do like an enthusiast who is affronted by a device with the temerity to go wrong :D

@Finditfixitphilipit 3 жыл бұрын

Great video. I think we have another mymatevince in the pipeline will have a go at anything which is what I like. I will mainly be doing consoles but I will try when I start my channel to get some other stuff and rwpair also. It's not everyone's cup of tea but it's great content

@StezStixFix 3 жыл бұрын

Thanks Philip! I love trying to fix things that I haven't had any experience with before, makes it much more exciting for me (and more of a challenge, I guess!) Look forward to seeing your content when you get up and running, wish you all the best with it 👍

@Finditfixitphilipit 3 жыл бұрын

@@StezStixFix As I say I will also fix things that are not of the norm. Maybe do a "retro Friday" "console Saturday" and "controller sunday"

@StezStixFix 3 жыл бұрын

I like the sound of that! 👍

@mikemargo 2 жыл бұрын

You fixed one of the hundreds of dry joints … they all need re doing!

@joshholbrooks1181 Жыл бұрын

Good work something must have been loose

@hydrolisk1792 2 жыл бұрын

I would have flooded the vias with solder to make sure that there is a good connection thru to the other side of the board. Sometimes during manufacturing, not enough tinning gets into the vias to make a good connection and it winds up becoming a fail point later on.

@wherami 2 жыл бұрын

Amazing how many things are fixed with a reflow.

@Ratchet_effect 3 жыл бұрын

Steve, you won! You succeeded after you Dabbled in the Dab & found the trap, I'm very surprised you and others didn't spot it. (Not the re=flow) after that 🤯🤪

@StezStixFix 3 жыл бұрын

Thanks Steve! Ooh, what did I miss!? 😳

@Ratchet_effect 3 жыл бұрын

Sorry my man I only just noticed you replied 😓 I'm super tired but didn't want to go sleep without answering you. I'll let you sleep on it and see if you can spot what it was, your clever you'll get it 🥱😴 BBL shit I nearly put kisses on the end of that message 😅

@StezStixFix 3 жыл бұрын

🤣 feel free to add kisses on the end of your messages! 😂 do you mean the resistor that I took off and put back? 🤔

@Ratchet_effect 3 жыл бұрын

Tart, still love my bother Steve 😂 I was tired and wasn't thinking straight, no not resistor. I was going to give you the cryptic version but nah! it was the Via that killed your backlight, I'm pretty sure of it. That's what was pulling the power low. Hey you ever fixed a 2.6" TV from the 80s the Casio. You got-a try one they are a handful and packed to the eye balls with components, sandwich boards with wires joining them. I did one today with a decode AV issue, Scope for the win! 😁 xx

@StezStixFix 3 жыл бұрын

@@Ratchet_effect ahha, gotcha! Thanks Steve. Never worked on a pocket TV, but it is definitely on my list! Sound alike ot would be fun! 🙃☺

@andyhowlett2231 2 жыл бұрын

You could have checked if the pads/tracks were still connected first with your meter. I worked in TV/hifi/video repair for 40 years and my rule was always to find the problem before jumping in with the iron. Anyway, could that via be faulty? I've seen them go high resistance a few times. The cure is just to fit a piece of wire through the hole and resolder.

@leeg4116 3 жыл бұрын

The manufacturer should have gone to *insert name of possible pcb sponsor here* Also, another great video mate

@StezStixFix 3 жыл бұрын

😁 thanks Lee!

@can-I-fix-it 3 жыл бұрын

Its still a nice fix.

@StezStixFix 3 жыл бұрын

Thanks James! ☺

@OOOHBILLY 2 жыл бұрын

Heck yea

@RBKing80 3 жыл бұрын

Great video Steve,

@StezStixFix 3 жыл бұрын

Thanks RB! 😊

@Jinxnator 3 жыл бұрын

RBBBBBBBB Bro from a another mother lol

@RBKing80 3 жыл бұрын

@@Jinxnator Yo

@Jinxnator 3 жыл бұрын

@@RBKing80 🥰

@flibble666 3 жыл бұрын

Nice fix my bet is on the ribbon cable.

@StezStixFix 3 жыл бұрын

Thanks Mr Flibble! Yeah, I think you're right. I'm just annoyed I didn't try it straight after reflowing the solder on the ribbon cable, then I would have known for sure! 👍

@flibble666 3 жыл бұрын

@@StezStixFix It's all part of fixing stuff annoyingly I've had it with PCs and laptops and other stuff so many times over the years and it also makes you wonder if said fix is only going to be temporary but you just have to go with it and cross that bridge when or if you come to it.

@StezStixFix 3 жыл бұрын

@@flibble666 Very true! I've used it every day since I fixed it last week and it's working perfectly, so I actually think it will be a long term fix. I hope so, cos I love this little thing now! 😊

@Jimnymudhunter 2 жыл бұрын

I knew the backlight was ment to be 3.2v.. they seem to make most backlights 3.2v for wider use of lipo/li-lon batterys that and 11v ones.. 2.5v (i think you said it was) is a odd voltage.

@TechnicNerdAT 3 жыл бұрын

u widened up the via which had bad connection to the top layer of the trace. by doing this now it should be fixed. u could soulder the via (blob on the hole) to get sure

@StezStixFix 3 жыл бұрын

Ah! Thanks Technic, that definitely sounds plausible 👍

@davidroberts2920 3 жыл бұрын

Hi Stez, I was working on one of those digital radios’ months ago, it had a short on the board which was due to one of the components at 20:00 minute mark on the video, how did you know It was a voltage regulator? I goggled the part number but not a lot showed up apart from a Chinese semiconductor company. Unfortunately, I couldn't 100% identify the chip, so the Radio went in the bin. Nice Job by the way, I'm glad someone got there's to work. 👍👍

@StezStixFix 3 жыл бұрын

Thanks David! I've got to be honest, it was just a guess based on the voltages going in and back out. As it happens, it's just failed again and I've just finished recording another video on it. Dont want to give too much away, but it was the power board second time around though... 😊

@davidroberts2920 3 жыл бұрын

@@StezStixFix Thanks for your quick reply👍.That's unfortunate the radio broke again, don't think those radios were built to last. but on the plus side we get another video out of it. 😁👍.

@Beaps73 3 жыл бұрын

Haha enjoyed that, thanks for sharing buddy

@StezStixFix 3 жыл бұрын

Thanks Beaps! 😊

@Beaps73 3 жыл бұрын

@@StezStixFix your slowly creeping up the, one of my fav YT channels. I don't know you just remind me of me. I like how you ask yourself questions.

@StezStixFix 3 жыл бұрын

@@Beaps73 Thanks Beaps, really appreciate that mate. I never get a good answer from myself when I ask, but it does seem to help somehow! 🤣

@Beaps73 3 жыл бұрын

@@StezStixFix when my dad was alive he used to fix me and my brothers bikes in the night while we was asleep. I could hear him talking to himself about issues he came up against. The next day my bike was like factory, so it pays to talk haha

@StezStixFix 3 жыл бұрын

Love that, Beaps! 😍

@DanBird 3 жыл бұрын

Great fix. Them solder joints where terrible, do you think that was probably the main problem?

@StezStixFix 3 жыл бұрын

Thanks Dan. Yeah I think it probably was. They were definitely factory too, as some of them were underneath the LCD screen and I know that noone had been under there because the screen was still riveted to the board. And the fact that the unit is in such good condition (even with the cellophane wrap on the handle) I don't think this unit ever worked after rolling off the production line!

@bunnylove273 3 жыл бұрын

hi bud very interesting vid looks like to me you kicked the gremlins out of the radio lol

@StezStixFix 3 жыл бұрын

Haha, thanks Bunny! I think you're right 😁

@flobiish 2 жыл бұрын

You should ad a voice over Steve, a VOS, if you will to announce your patrons. Maybe doing rap.

@didierdubos 2 жыл бұрын

Maybe an issue with the via (the big one) or as you cleaned the voltage regulator, a bad solder

@thack3624 2 жыл бұрын

watching from USA wondering what the heck is DAB haha looked it up, seems factory to me, with tape still on handle, probably just had a small issue with one of the solder areas you touched up from smd cooker, could have had large dodgy via that you probed and connected it back together or as others mentioned eating that last volt required, seems silly to me to have linear regulators on a battery driven device

@SkyfighterZX 2 жыл бұрын

Some say he still can't sleep at night because he didnt know what fixed this one xD

@soldesign72 2 жыл бұрын

What does the flux do?

@systmuk 2 жыл бұрын

nice

@hotlavatube 2 жыл бұрын

It'd be funny if the backlight was just turned off. My bedside clock (different brand) has variable backlight you can tap through different brightnesses including turned off.

@heypockyway6652 3 жыл бұрын

Did you try pouring some sugar on it? Nice job, knowingly or not. What was the track at the end?

@StezStixFix 3 жыл бұрын

I forgot the sugar! 🤣 The track is one of the KZfaq library freebies, think it's called High Rise or something like that 🤔

@lukasdvoracek842 2 жыл бұрын

YOU ARE A WIZZARD STEZSTIX! 😀

@psi23k 2 жыл бұрын

The problem is now the companies have to use lead free solder, which is junk, to comply with safety issues.

@andycooper4230 3 жыл бұрын

Enjoyed that one feel your pain lol

@StezStixFix 3 жыл бұрын

Thanks Andy! 🤣

@KelikakuCoutin 2 жыл бұрын

Good job. Thanks for the content. Keep up the good work. בס'ד

@clivebradley2633 2 жыл бұрын

Burning some plastics with a soldering iron releases a lot of Chloride Ions which will eat your soldering iron tip

@davidthomson6837 2 жыл бұрын

Do you have an ebay account where you sell the stuff you fix? 👍

@dj_noxxie 2 жыл бұрын

Did anyone find the crack in the board

@RetroJack 2 жыл бұрын

It always amuses me that what the UK calls "DAB radio" is just called "radio" elsewhere - digital radio has been around for ages; it's not that special nowadays.

@samuraidriver4x4 2 жыл бұрын

Its called D.A.B. (as individual letters) in the Netherlands. Must say its still not really popular and reception isnt great

@scratchback2001 2 жыл бұрын

S**t I hate printed circuit boards. The sooner we get back to point to point wiring, the better. They're a pain in the arse!

@KoolBreeze420 11 ай бұрын

It could have been left over flux and cleaning it was the fix.

@craigconway4093 2 жыл бұрын

Good on ya Lasagna :)

@jak_1894 Жыл бұрын

I bet that was expensive originally, but look at it there's nothing to it 🤦

@quanchyplimp 2 жыл бұрын

Anything named/labelled as "Retro" is pretty much guaranteed to be JUNK., pale pasty blurry blue backlit displays and horrible clicky buttons, much like buying a Skoda back in the 80's, you knew it was shit!, but it got you going for next to nothing,..... but within 3 months, it's fucked and you're buying another, can you say "false economy". Always nice to fix something though! :) Most of these things are using LED free solder, those points get crusty and oxidize, but by relowing the solder points, you bought it back to life....is my guess, I think you realise that anyway.