Let me tell you, you are not going to be disappointed for what you paid for. Absolutely loving it👍👍👍

Thanks a lot for your sweet comment buddy! I did the body turned out sweet check it out here kzfaq.info/get/bejne/h6ubZtd9x6neg3k.html

Hi habib, yes it is very competitive against trx stuff and that I did not expect even tough it is all metal and stuff. That is why I love it so much. Thanks bro for the comment👍❤😁

Nice man! Sounds like good stuff👍

Thanks

Hey thanks for commenting! Awesome man, love these axles

@@combarccrawlers3948 they add some good weight down low and take a beating, just the fronts seem a bit weak but they are cheap enough and i do run 3xxl mud slingers on them on 3 s so hey.. its a cheap break and easy fixed :}

Honestly you read my mind! I was thinking power wagon with 2 tone paint job would look absolutely stunning! Stay tuned! Thanks for your comment!❤

A tip for you regarding the receiver,mount it to the underside of the lid,that way,even if water gets in there,the water won't affect the receiver's operation.

@@semperatis good idea! Very clever👍😎

Have a look on my channel,to see the colours I used for the Power Wagon.

Hi there friend, thanks for your appreciation! Well when talking brushless you need to look for a "sensored" brushless type of motor. I love using brushed but brushless has the advantage of better reliability and if it is of quality lasts more than brushed. Well I certianly do not know much when it comes to searching for brushless but if I was you, I would search for this type of motor on ebay on aliexpress. Thanks for your comments, yes you are not going to be disappointed with this chassis. 👍👍👍

Filled my shocks with oil and are great. Cv axles never had an issue with them so far. I do not push the rig too hard.

@@combarccrawlers3948 I killed the cv's over the weekend at Beat the Creek. On trail 1, lost power to one wheel, tried climbing the creek with 3wd. I broke the other one too... Had to walk out 🙁. I'm someone who will find limits.

@@Tony-ib2vm its fun to push them a bit sometimes but I know that my consequences will be money out of my pocket to fix and the worst having to wait for the parts to arrive. Sometimes it takes up to 3 months to recieve my packages... I like to baby my rigs a bit compared yeah. Thanks for your comment mate👍

I agree with you 100%. Amazed actually with the quality. Wait for the body. It is going to be absolutely great!

I almost finished it behind the scenes

Thanks for your comment! I never had any issues with mine, yeah the pumpkin is a bit big but I just love everything about it. For what it is, its not bad I think. It is very decent. Thanks!👍❤😁

But if yours is a clone . Then mb it's a bit shite

Man I had a guy tell me that as well I do not get what you exactly need to do to adjust the angle, just loosen the screws on the joint and re tighten?

@@combarccrawlers3948 at the top and bottom just passed the wheel hex there is a small hex screw and there shouls be guiding slides on the fronts so you can tip the front end up and gain a lot more steering mate.

Thanks for your comment and sub👍 you are right, at the moment it does not seem that this exact chassis kit is not available for sale, however I found the same chassis kit but with a set of wheels and is ridicolously more expensive than this chassis kit. Its the same but it has thr TFL branding so that apparently makes it more valuable. Thanks for your comment again. a.aliexpress.com/_msST36E

You would have to change the gearbox for that I assume. The thing is I was looking into buying another chassis kit like this one but with the 2 speed gearbox and its expensive to the point where its more worth buying the trx 4 chassis kit with much more refoned engineering quality gearbox.

@@combarccrawlers3948 deal man thank you

Hi there, havent had any issues with this one. About the transmission I never had the intention to change it. Always been reliable. Love this chassis.

@@combarccrawlers3948 don't you experience torque twist with standard transmission?

@@polishguywithhardtospellna8227 surprisingly not too much

@@combarccrawlers3948 thanks very much for replies

I have a big army mate!😂 I got 6 crawlers, a basher, 2 nitro bashers, a street race car and much more behind the scenes😂 Iv e got plenty😂😂😂

Great!😂😂😂

It works my friend, been running them for a while now like this. Never had issues.

You could adjust the links or get different links I believe

I believe they are around 45mm. Thanks for your comment👍👍👍❤

I didnt break them yet but they have a lot of slop in them and they make a bit of noise... I do prefer normal style ones. I was surprised to buy a set of metal normal style ones and they seem to be very unbalanced or I am doing sonething wrong. Thanks for the comment

@@combarccrawlers3948 almost sounds like the inner bearing, behind the axle in the housing may be missing??

@@zaxpage9003 noo definitely driveshaft noise

Both are great, it depends on your intentions really. If you intend to keep it scale realistic and close to original classic crawler I would go for this chassis and if you want something better and more dedicated for compex crawling, I would choose the portal axle version.

@@combarccrawlers3948 so you think the portal axle better prforming

@@jackgibson8627 I would be lying if I said that portal axle are not better. The lifted center section design allows more clearance which means it will hit the axle less when crawling in tougher conditions.

Was thinking of getting that but compared the prices a bit and I am debating because it is almost the price of the trx 4 but does not have unlocking/locking diffs and a 2 speed trans. But I am thinking of it. Thanks👍😊

COMBA RC Crawlers, thanks for the reply! Similar with the gecko x10 all metal but no portal axle, trx is RTR but this one is kit but same price

@@Freakzilla45 thanks man, I reply as soon as I can to every comment so feel free.

No idea, its the original one that came with the gearbox.

There is a video somewhere on yt about it. Its very simple. The front knuckle adjusts via the 2 screws holding it to the axle housing. Untighten the top and bottom screw slightly and the assembly is free to tilt. Tilt it in the direction where it will be aligned and tighten the screws. Super easy.

Bumper dimensions should be around 13x8cm. Thanks👍😁

www.ebay.co.uk/itm/402649960668?hash=item5dbfced0dc:g:5TgAAOSw1iVgBQXu

@Shade Tree RC Hi friend, I can't say it hasnt held up for me. I have attempted to push it a bit and it took it. I once submerged it fully underwater and still went strong! Its a nice piece. Thanks for your comment!

Hi there, you need to search for any body that has written that it is a 313mm wheelbase. That is standard whith these chassis. Thanks

Thanks dear!!

Thanks for commenting! I currently updated to a hard case but that was my battery kinda protective solution😂😂😂 yeah lol! Thanks for your positive feedback about the rig! I have a trail/crawl video of it and most importantly the body I got for it! Check out the playlist:Axial SCX 10 all metal crawler vids: kzfaq.info/sun/PLlG2GKGHUlaWvRvJA8sZ_VraauVzrvIRp

@@combarccrawlers3948 will do brother ! Happy crawling!

Well it has the looks but the big advantages are no flex in plastic components especially if the diffs were plastic, threads do not strip like in plastic and it is overall more rigid and I feel safe to abbuse it a little. Just a strong and rigid foundation. I love it

@@combarccrawlers3948 Thanks for your response. However I was wondering where to get some spare parts when it broke? I couldn't find any supplier for its spare parts... definitely not buying another set for spare parts... 😅

@@6JWB9 you can find literally any component of the chassis on aliexpress seperately for sale just search crawler scx10 parts gearbox etc. For example I heard the diff axles are the same as an og scx10. I find it impossible to break but thats what I know about parts. Thanks for commenting! Proud to help out👍👍👍😁

@@combarccrawlers3948 Once again, thanks and much appreciated your info!

I would have to guess 25 tooth

for crawler right

They are good enough but I changed them to more grippy ones for better traction.

@@combarccrawlers3948 What did you use as a replacement?

@@cphs0777 RC 4WD 1.9 rock crusher tirws

*tires

Bro need titles, every youtuber does that😁

Ija mhux xorta nitkellmu fuq messenger jekk trid. Niehdu pjacir kieku.

Listen my friend, I know the system I installed may not be top of the line, but it worked out good for me so I do not see a reason why to say it is a "chinese knock off". At least I did not install a 5$ ebay esc which works as FINE as the 1060 which is a great ESC. I take your oppinion but I do not get your point about the "chinese knock off" thing, sorry. It is a great system, I never had any issues with it. Infact I recomend it to many people. Please do understand that if you think I am being cheap here, even multi thousand subscriber channels put budjet investment in these hobby grade vehicles. That is my oppinion at least. Thanks

@@combarccrawlers3948 was on about the chassis being a cheap Chinese knock off and if it’s not made by axial it’s not a scene 10 but it looks better built than axial stuff no plastic on the one you purchased it looks great and if I was in the market for a new crawler I’d consider the one you bought thanks for the reply and hope you have a great new year and stay safe from this COVID stuff

@@stephenr6427 thanks happy new year to you too!❤👍