I Bought The Worst Can-Am Renegade On Facebook Marketplace! | What Did We Get Ourselves Into... EP.1

Рет қаралды 12,633

4 ай бұрын

Like, Comment, Share, and Subscribe!!
This week on Let Dirt Fly, Seth surprises Marshall with his new Can-Am Renegade. Well, actually, this thing is the farthest from new we've seen! This machine has a laundry list of issues. Can we bring this thing back to its former glory. Better yet, can we get it done before Busco Beach Mud Bash 2024? Follow along this series as we revive this poor machine.
Save money on the products we us! Use our discount codes below:
-Perfex Industries 10% Savings : Letdirtfly10
-TowCord Timmy 10% Savings : LetDirtFly
-Dooplicator 10% Savings : LETDIRTFLY
-Fodsports 12% Savings: LETDIRTFLY
-Kong Motorsport 15% Savings : #LDF
Follow Us On:
Instagram - letdirtfly...
Facebook - / letdirtfly
Subscribe to our friends!
@ADVENTURESThisWay
@AmotorB
@j-muddy93
@theben4x4
@ScootersGarageYT
@XMR_Mudding_420
@loudnproudatv3502
Sponsors, Affiliates and Supporters:
-Perfex
-Quad Logic
-DP Brakes
-Kong Motorsport
-FodSports
-Novawinch
-Dooplicator!
-Towcord Timmy

Пікірлер: 50

@336MudMafia. 3 ай бұрын

All I’m saying is….welcome to the renny crew😏 Now get that thing right & let’s go hole for hole again😈

@LetDirtFly 3 ай бұрын

Thanks for watching Joe. Hopefully, she'll be ready for Busco. If not we can still go hole for hole with the 850.

@336MudMafia. 3 ай бұрын

@@LetDirtFly Of course! Sounds like a plan🤘🏻

@atv_lifestyle 4 ай бұрын

It’ll be fun to watch and see what you all end up doing to the renegade. We’ve just started looking at finding a project ATV as well to build for my wife to have a mud bike! Keep up the great work guys!

@atvsteve2021 4 ай бұрын

man i rode with you down at busco one time glad to see you got a channel cant wait to see your builds and rides

@ADVENTURESThisWay 4 ай бұрын

Congrats on the new machine Seth! Should be interesting, I have no doubt! BTW if it gets parted out I would take some of the plastics 😊

@LetDirtFly 3 ай бұрын

We’re hoping to get here going here soon! The engine just happens to be on the bunch in pieces at the moment 😂. We’re just doing some “maintenance” 😅

@Darwindiggler 4 ай бұрын

Hey man how's it going I wasn't expecting to see start the channel off ! Cool man very cool dude! 🤘🏽 il be sure to catch up on the vids an throw some comments in as well

@theben4x4 4 ай бұрын

Cant wait to see this!

@Theragecheaterlolz 3 ай бұрын

IF it starts fine, then after warming up, hard to crank, slow turning over, youll need new rod bearings, when they are cold they are normal size, when they are warm they swell, Meaning the bikes Probably been sank, However, dont know what you got it for, But theres a guy on youtube teaches how to rebuilt the motor, step by step by step,

@jacobsimon2245 4 ай бұрын

Alot of memories with that bike

@Theragecheaterlolz 3 ай бұрын

Yep, def needs crank bearings, Without any doubt! Hopefully cheap enough wouldnt really matter, has potential to be a great bike!

@brianchapman4565 4 ай бұрын

I Can't wait until you guys get that thing going it will be an animal.

@Threedogsinatrenchcoat 3 ай бұрын

I think i saw that one swamped, some ether and octane booster good as new

@Darwindiggler 4 ай бұрын

That's a beautiful machine wth lol looked great to me at first sight .

@motorsector274 3 ай бұрын

It looks like new project 🤟. I hope, that you make it run for few bucks.🤑🤑🤑

@LetDirtFly 3 ай бұрын

A little more than a few, but she will be up and running again soon.

@daltonmorein4140 3 ай бұрын

I want to get in the chat and let you know I had a 2012 do the same thing to me and it was the fuel pump. The fuel filter was clogged on the bottom of the fuel pump. It would run for 30 minutes eat up and it shut off, I took the fuel pump out, cleaned it and it ran so I decided to change it

@LetDirtFly 3 ай бұрын

We wish it were that easy. Engine is on the bench tore down as we speak. Stay tuned 😅🤘🏼

@louisjohnsonjr.4934 4 ай бұрын

The restart issue after it gets warm is from the tune thats been added to the bike. Thats the same ol classic issue that many have when they change the setup on the tune. They are very well known for it. Go with a milder tune and itll be fine

@LetDirtFly 4 ай бұрын

Unfortunately, as you guys will see Don, the crank tore up in it most likely from being sunk and the bearings are toast. It was literally seizing up lol

@philippelavergne762 4 ай бұрын

Ive had that problem on 2 renegades before… it was both bad grounds.. when it get hot you couldnt start it or was harder… had to wait back to start it

@neechie00 4 ай бұрын

Sounds like it’s Modshop GP time!

@Lean_Wagon 4 ай бұрын

I got a 2019 renny 1000xmr just needs plastics and a seat going for the cheappp

@philliplucke1339 4 ай бұрын

You guys are awesome to funny get it boys

@garyyounkers5383 4 ай бұрын

I have a 1st gen xxc that Iam parting out

@OnKill_Powersports 4 ай бұрын

Once you go renegade you can’t go back 😎

@j-muddy93 4 ай бұрын

@OnKill_Powersports #facts

@dennisdwagner2012 4 ай бұрын

Overrated 🤷‍♂️ renegades are basically just a less practical outlander. No difference in performance but has no utility purpose. Whatever a renegade can do, an outlander does better

@OnKill_Powersports 3 ай бұрын

@@dennisdwagner2012 they make racks for renegades plus I have no intentions of ever using mine as a “utility”. Maintenance and cleaning the renegades are far superior for the simple fact everything isn’t covered by 40,000 plastic covers. I can have a belt changed in less then 2 mins on a renegade, can’t say that for a outlander 🤷🏼‍♂️

@dennisdwagner2012 3 ай бұрын

@@OnKill_Powersports I don’t have to remove my footwells to do a belt change 😂

@jamiedobie9665 3 ай бұрын

I like my fenders so I won’t go renny

@j-muddy93 4 ай бұрын

Change the starter. I think rings and bearings

@roncrouch404 4 ай бұрын

Did Seth get a new ride? Where'd the truck come from? Lol.

@sethharman3006 4 ай бұрын

Got rid of the durango.

@roncrouch404 4 ай бұрын

@@sethharman3006 I remembered the Durango. Good upgrade to the ram!

@sethharman3006 3 ай бұрын

@@roncrouch404 it was indeed!

@fizzysoda5138 4 ай бұрын

Rod bearings are toasted time to pull the engine

@Darwindiggler 4 ай бұрын

It sounded strong

@LetDirtFly 4 ай бұрын

On video it sounded good, but he had to literally keep it going with throttle because it was seizing up and wanting to stall. We found metal in the oil

@Darwindiggler 4 ай бұрын

That sucks I hope it wasn't to big of a loss. Mod shop an get a 1085 lol