Note: I flipped the fans after the video 👍 Subscribe for new skills every week! Check out more videos: kzfaq.info Instagram: instagram.com/mikeshaketv Pc parts links in description!

This guy literally did better than the Verge with no experience...

Shoutout to the creaters who make videos in English when its not their first language. Very few English speaking youtubers could or would do this, and fewer still would do it as well as this guy.

When the PC ended up working in the end, I genuinely felt happy for you and with you. I planned on buying pre-built, but you've convinced me building my first PC is the way to go. Cheers mate, you deserve it.

2:00 The reason why you have to keep the ram sticks a slot apart is due to the ram slots having two different channels. The way the motherboard is set up is to have a channel handle (usually) 2 ram slots at a time. So having 1 on each channel has more performance benefits since 2 channels have an equal amount of load rather than 1 channel having full load. Thats also why you usually dont buy a single stick of ram for example 16Gb but instead 2x8GB.

"I'm not a gamer, but I could be" Next video: Learning how to do a 720 no scope blindfolded with eye tracker

Him: actually does research Me: Ok that one has a rainbow so ima buy it

For those who don’t know what dual-channel and single-channel memory is, here is a minecraft example: Imagine the workload as the item and fuel, and the channels are the furnaces. If you force all the workload on one furnace, it will take much longer to get the final result. When you spread all the resources on multiple furnaces, it’s much faster and easier to grind the final result. So single-channel memory is a single furnace, and dual-channel memory is multiple furnaces. I hope it made it easier to understand :D

Mike is practically a gamer, just in real life.

Mike Shake: builds a running gaming pc without experience for 2k The Verge: impossible

It’s one of the most satifying things ever to see someone who has no clue how to build a pc actually build one with 0 mistakes. Well done Mike

This was a pretty real and honest video of a first time pc building, shout out to all of the pc building videos and forums that made it possible, congrats

Hi mike, at 5:00 you didnt know what those cables were. They are cables for ssd’s. The thing you didnt know was there are 2 types of ssd, m.2 and sata. The ones you installed are m.2 ssd’s which are faster and higher performance compared to sata. Whereas sata is slower and is connected using those extra cables you had. Hope this was useful

"I'm not a gamer" Next video:Beating dark souls with no gaming experience

I dont think anyone can hate this guy

7:06 the hdmi being in the wrong spot is so funny to me for some reason because i have like the same exact motherboard and did the exact same thing

Congratulations ! I've been building computers for 20 years and it's intimidating the first time. Even though compatibility is less complex now, there are so many choices and decisions to make. Congratulations on your first computer build. I have the exact same case for my media center. 👏😉

Him: I use the box as a base. Me: he definitely watched Linus

Mike: "I am not a gamer but I could be..." Me: "I see what is gonna happen in the future."

Man you are just so humble and seem SUPER kind.

This was the first video that sparked my 8 month long journey of researching about building pcs, and i was terrified once i finally got the parts a few days ago. But when i built and tested it, it all worked out with no hardware issues whatsoever. Never would i have ever thought i would single-handedly build a fully functional windows pc all by myself as a 13 year-old. But im super grateful to have it work in the end.

in less than 10 minutes, Mike explained this better than an hour-long tutorial did

I literally learned more from a dude with no experience than the verge one...

Reminder : do not remove the Plastic protection while the pc is on because it might cause static energy which makes the pc components to not work and the chances are you might have to buy the parts again . it happened to me . just be careful when u remove the protector

I love seeing how happy this man is when it powers up and works! such a wholesome moment

Giveaway entry "I'm not a gamer but I could be" top 10 marvel origin stories

Guys, I changed the orientation of the front fans (to have them as an Intake) and I mounted them "indirectly". Temperature went down 3°C this way. Thanks for the suggestions! Ps: back and top are exhausts.

building your own pc can be one of the most stressful and infuriating things ever at times, but it's also such a good feeling seeing it all come together and seeing it work for the first time.

YO this video looks extremely help full for new builders trying to figure out the wiring of the PSU . You documented the build process really well! Good shit dude.

Mike in 2069: learning how to make pc components from wood.

Mike in 2021: “I learned how to create a COVID vaccine.”

The main reason why you want to place the sticks in the 2nd and 4th slot, also known as A2 and B2 is for dual channel support. Otherwise the PC won't read the two sticks and can only read one. Although it may look like it is in use, it isn't. But, it's always best to use up as many slots as possible to maintain that flexibility and to have a powerful and quick running PC that will last a while

This guy made a video that completey changed my life in not being afraid in building my own new pc in the future.

My guy went from "I don't know how to build" to "here's my advanced tutorial" real quick.

bro I feel like a proud father seeing him learn new stuff every day

huge props to this dude, he did so much research and even tho he was confused at times he managed to figure it out

Just so you know, the reason you didn’t get any output when you plugged your hdmi in the motherboard is because there is typically no integrated graphics with ryzen cpus. But overally great job

You forgot a "Swiss army knife that (hopefully) has a philips head screwdriver"

When a beginner builds a computer better than what was supposed to be a PC building tutorial

your the best at learning new things honestly

Excellent work!

If i had to watch one KZfaqr for the rest of my life it would 100% be Mike Shake

Mike in 2030: *Learning how to fly by using my brain with no experience*

You make it look so easy!!! I am about to build my first pc and see 2 hour long tutorials on this.

Well done. That looked rather easy and no issues with the small power jumpers.

I was so afraid of trying new things;things that I have always wanted to do.This was until I found your channel.Its so weird that a guy on the other side of the planet,who has absolutely no clue about my existence,is pushing me to do the things that I have always wanted to.Thanks Mike.I hope that your channel explodes and gets all the love and appreciation it deserves.Much love.

“This week I fixed all of Cyberpunk’s bugs” - Mike in the near future

Solid build! 👍

I’ve wanted to build a of for a while and I’ve watched so many people say how easy It is but I’ve never seen how easy it is but this vidio has realy made me see that building a pc isn’t that hard thanks

Everything is great except AIO fans. U mounted them in wrong direction and they are pushing air out, not in as they should. Now u have 4 fans pushing air out of the case which is bad, it will create "negative pressure" inside ur case, which will result in higher GPU and VRM temperatures, and all the dust will get into ur case through every little gap because of this. The way u mounted these AIO fans is great if you'll have radiator on top... You have it on front so you should rotate them so they will push air in. + u could connect this additional 4-pin for CPU

Mike in 2080: learning how to build a planet

A list of all the componants if not all listed there, and a few more closer details about a few of the wire posistions, but above all this video is very well done, maybe you could put the parts list into a PDF or Doc file, also a video covering how to work out what's compatable with what and how to find this out for ones own build would be useful, excellent video

Even a year later I have this in my recommended. Amazing design that I chose to use the design for my own dream PC. Thanks!

honestly would have chosen parts differently but really good choices for like 5 hours of knowledge. also looks real nice and good cable management for no experience.

It’s like legos, once you build it a couple of times it’s going to be seamless putting it together nice video btw 🔥

you are great man pls dont stop doing what you are doing rn love you.

Amazing video, your reaction when the PC started up reminded me of when I started my PC for the first time

Lmao im not first, but. *This Guy Literally Didn't Clickbaited us.*

It feels like he's a dad teaching his Son when they both have no idea what to do, yet want to get the job done perfectly. Epicly done and I feel kinda wholesome as well ;)

This guy started my love for pcs love this guy🎉

I can't wait to start and finish my first PC. Decided over the last couple days to build one, all my parts will be here in 3 days.

Mike in 2099: learn how not to die

"I'm not a gamer" Gets RTX 3070

This guy explains it better than a pro. I am saying this as someone who is new to pc stuff

best pc build, in less than 10 minutes, Mike explained greater than hour long tutorial, I just love his accent

“In case I decide to become a gamer” I think we know what’s coming...

Me:*reads title and watches the video* Also me after the vid:"I expected Explosions...My disappointment is immeasurable and my day is ruined"

5:29 a correction they are called all in one because when you do water cooling you need a radiator, tubes, connectors pump, reservoir, cooling block and fans but aios come with all of em.

I just finished building mike’s pc in pc building sim, Looks awesome! Amazing video

“giveaway entry” Mike in 2050: Building a quantum computer with no experience

Mike shake in 2050: "I learnt how to be immortal"

Great job only thing I would advise against is using the double end of the PCIe cable it’s best practice to use 2 separate pcie cables and u can do that since u have a fully modular power supply

very nice video. I have the same case too so i might buy those fans, thank you for also saying how to do it. it helps a lot

So basically this guy can do anything with just KZfaq tutorials..

Mike: Im not gamer, but I can be. 2021: Mike Shake - I learning how to play games

Thank you for the video! You are part of my inspiration for building my own PC

This video was way more helpful than all the other videos I’ve watched great build btw

No one: Literally no one: Mike: I just wanted to learn to build a pc and bought the 3070

You should do becoming a professional gamer similar to shroud like aim. lol

I keep watching this over and over again

This is awesome! I can't stop thinking about how cool it is!

You know Mike makes me feel more confident in myself because he manages to do everything with little to no experience, and through it all he has a positive attitude! This pc build also makes me feel more comfortable as well! Absolutely inspirational! 👏

Him in 2040 "Making a time machine with no experience"😂😂😍

I love the look of happiness on his face when he found out it works amazing video!

Man explained it better than any other video ive watched and that was on his first time

Mike: "I'm not a gamer but I could be" *Proceeds to install one of the best graphics cards on the market*

The skills Mike learns are cool and all but can we appreciate how good Mike's editing skills are.

The guy who "doesn't know how to build a pc" just taught me the basics in under 10 minutes

Its very impressive but you have to flip the two fans in the front around for better airflow because now you only have fans that are pulling the air out but you also need some that pull air in otherwise the temperatures are bad

''giveaway entry'' The most special about this build is that he managed to get his hands on a rtx 3070

At least this guy managed to do it better than the verge 😂😂😂

Bravo on the video bro great video, content, editing 🥳🥳🥳🥳💪🏾💪🏾💪🏾💪🏾💪🏾

Dude this is super impressive! Props to you for using the NZXT H510, favourite case personally. I love how clean it looks. And mixed with the NZXT Kraken air cooler, creates a really nice aesthetic for the whole build. Motivates me to do my own build!

"giveaway entry" that 3070 is cleeaan

When u put the ram sticks in the second and fourth slot u achieve the dual channel feature which basically makes some programs run in the first ram stick and other programs run in the second ram stick making ur computer run faster and more efficiently ( btw great video )

6:33 please connect ALL the cpu wires in that because i can see a 2 by 2 not connected. normally there should be a split cpu cable. also you should connect ram 2nd and 4th slots. everything else, GREAT job. love the build

dude you nailed mostly all of this

Him: builds a gaming PC Me trying to understand what is he talking about: “I like your funny words magic man”

Congrats! You did really well for your first build. There is however one mistake you have made. You have the fans on your AIO's radiator mounted as exhaust, so all your fans are just blowing air out and no cooler air is coming in. You will be shocked to see how much dust will accumulate with this configuration.

you did mostly everything right. something that i noticed is that you should move your m.2 drive being the 970 evo to the top slot. the reasoning for this is because that lane has direct access to the cpu on pci gen 4. B550 chipsets have 1 pci gen 4 m.2 and 1 pcie gen 4 16x slot being where you installed the gpu at. granted your dive isn't a nvme gen 4 drive, its still better practice to use the top slot.