Man I think with smaller tires that thing would be sick!!! I like the fancy fancy lights haha😂 Thanks for the video guys💯

"What's up Tenth Scale Squad?" Hey, that's me!

You might as well remove body, wing, body post and make this one of those vehicles that when it flips over, it can just keep going. Lol.

Just convert it to a Big Rock all you need is the rear body post, a LWB side guard set and the a Big Rock body. Put some ProLine Badlands 2.8 on and it would be awesome. I converted my Typhon 3s to a Big Rock. I swap between it being a Typhon and a Big Rock depending on the surface. It takes less than a hour to swap between the two.

Dude you’re having a blast, that’s what it’s all about. Love pimping my granite out, probably have too many lights on it lol

That looks goofy with the enormous wheels.😂

Man that's a wild looking build!! I hate the rear end gave out on ya but hey that's part if the rc life right?

Those tires are huge!!!! I think it would be sick with smaller tires! Great video! Cheers! #10thscalesquad

I completely converted my Brushed Mega Granite to a 3s Brushless Granite. All the parts from a 3s BLX. Wasn’t cheap. The last thing I want to do is swap my short chassis to the long chassis. I’m assuming all I would need is the chassis and longer driveshaft.

She might have been okay if you just would have left Granite tires on her and I would definitely say go get yourself an outcast 4s if you can find one if not just wait a month I'm sure they're going to be refreshed here pretty soon

Get the Big rock 3s! It's my favorite. I have all the 4s and 3s line from Arrma.

Smaller tires like the stock granite tires and a wider stance using the typhon arms

+10mm hex extenders might help a bit. Replace those trenchers with backflip lp 4s and you be golden!

Was the smoke at 0:34 seconds a vape cloud? Be honest... Lol

Very bad financial decisions have brought me here. I've owned a Granite for 7 days. Bent motor mount, broken mount casing, bald tires, rear body almost completely missing... and then I find out that ALL replacement parts are back-ordered. Oh well! More bad financial decisions... M2C Motor mount, Pro-Line Badlands MX28 belted tires, and duct tape for the body! What's is going to break next? My guess, front arms, or steering knuckles. SO MUCH FUN!!!

I just got finished doing this except used 2.8 belted Trencher tyres. It looks very nice but so far I'm having trouble with stabilty, one slight wrong move and Its game over. I have some regular unbelted badland tyres, might give those a try, see if they help. Great video BTW.

It sure looked cool. I think it's great when you can experiment and reconfigure a car to they way you like it. Hopefully you get the bugs worked out. Thanks for sharing your build. 👍👍

How did you get the wheels on

This was a great build. Looks so cool. Sorry it broke. Thought it would dominate all with those wheels and power plant. I still think it's awesome!!!.

i got my new granite 3S BLX in oct around the time the big rock came out and have loved it but might have changed my order if the big rock was in stock.lol i lick the longer chassis for high speed and the wider axles but i have had no complaints about the granite. 50.3mph outta the box but it can get away so easy at those speeds. its a skatepark superstar too. the frankentruck just isnt sure what its supposed to be.lol wheels that big but blows a rear end as soon as its off pavement?

Just converted a mega Senton to a 3s. You need the HD metal input shaft and slipper assembly. Diffs are grease filled in the mega and just need to be cleaned and filled with fluid.

What are the wheels 🤔

Pirate2 9116 C-Hub Spacers.... tho I have a Extra pair, I tried something else. A Insulin Syringe Cut to length and with a Wide enough Slit down it to squeeze it in (1mm or so). Works just fine. Also 4mm stainless steel machine screws are just a hair larger but still screwed in. So those are 3.5MM??? Super Glue should hold them in now. Well, lets see what the 3rd Run will bring on the Same original battery charge ( already at a good 50minute run time ) . What will fall apart this time???? 😃 😃 😃

Belted 2.8 Trenchers are the way to go

Get some smaller tires for it! Like the regular proline badlands or dboots backflip LP! (Outcast 4s tires)

So just out of curiosity, did you swap the Spur/pinion to the 3S version? I saw the Typhon was the Mega version, the spur/pinion on that thing has a crappy ratio. Def recommend getting one from a 3s, they sell it plastic for around $50 or metal for around $75

I cant believe this is cool i wanna do it on my typhon and arrma!!!

Those input shafts are garbage. I think you did ok but maybe smaller tires😂. They as wide as the truck. If it says Granite anywhere, you know I'm in! Great video.

Those tires are killers!!!

Those tires are redonkulas!!! 🤣🤣🤣 I like the idea, you said you have to much $$$ in it, if you put a smaller tire on it I think it will run better and less stress on the mechanicals. I know more $$$, more problems!! 😆😆 Stay safe and bash on from Colorado!

Looks like you made into a lawnmower

Yep I tried that with my Senton can't push the big tires😭

It's ultimate.. But terrible? Understandable have a nice day. Lol

That thing is sick 👍👍👍

Dude, why did you use them big ass 3.8 MT tires, that's whet messed your input shaft up.

i had to put hot racing diff in rear of mine, arrma plastic diffs are thrash

Cool build man, I like arrma Frankenstein's 🤣 I have 2. One started life as a 3s Senton but is now a short course Kraton with a 6s power system lol. The other was a 6s Kraton but is now a outcast that's 8s capable but I'm very pleased to report they are the muts nuts matey. Both truck are way over a year old so don't look so pretty but are reinforced bash beasts, having bought any more cars since just put all my money and effort into these two here and I don't regret a thing. My short course Kraton is amazing on 3s with bald katar tyres on tarmac and off road I run badlands xtr the thing is on rails, 2050kv 6s Kraton motor with 20t pinion. I could go up to 26t but I like 20 for if I want to run 6s backflip MTs. The rear drive shafts had to be upgraded, standard one twist and snap in minutes, front shafts sho no sign of wear... A problem with running the big 6s motor is that 20t is the lowest I can go or the centre drive shaft is in the way, not really a problem if you have the right motor. All my deferentials and drive pinions, slipper ect are stock and are the same ones that came with the truck over 14 months ago. Inside the diff housings where the cup lives was bone dry so I filled it full of grease ✌

Love your channel! Keep up the content 👌

If you don’t have a ERevo I recommend it if you’re willing to do a bit of out of the box preventative maintenance and upgrades

I"ve never seen such a great video in my life I wish you prosperity 형제 친하게 지내봅시다 😀😀

so its a Granite body on a Typhon chasse?

Looks good always got to try new things

😂 good effort

Can you make the stance wider on the granite..

Cool idea. This is what I enjoy seeing. Doing crap to your rc's because, well, I thought about it. 😆 Pure enjoyment right there.

Well it was to be expected with those gigantic tires

Longer yes wider Nope The parts are similar just longer and shorter Now the diffs are metal those wheels may work

my brotha that was very creative. unfortunately it didn't last long 💪💪👍👍

What does brushed and brushedless mean?

was cool while it lasted,awesome video

Sucks that it broke but it's pretty cool. Hopefully it runs again soon with all 4 wheels turning and burning.

That looks epic :)

Get the Big Rock!!! 😁👍🏼 I want to convert my V3 Senton to one eventually, lol...

1:09 vape nash?

Looks schweet to me! what wheels are on that thing?

Should have gone with the 2.8s no? I mean i get you were trying to build a monster but I think like you said its impractical

It's a granite with underglow different tires and a wing

Build, drive, break, fix, repeat....👍🏾👊🏾✌🏾

I put a set of the 2.8" Proline Prime's on my Typhon 3s... Amazing. 3.8" just seem too heavy for the plastic gears.. buh bye input gear.

This would be fun to play with in the mud

🙉🤦🏽‍♂️ Tires look ridiculous on that thing.

Not sure what you were trying to do here but those wheels are obviously too big. Each car is great on its own. No need to “improve”.

We’re you got tire

That poor tiny motor and esc.

Get the Outcast>

It does look kick ass! :)

Tires are waaay to big brother I'll bet it's be much better on a set of proline badland SC wheel and tire

Cool but the wheels are to much big

no music please // plastic gear

If it’s terrible I’ll take it 😂

Just build a Xmaxx like I am about to do these arrmas suck I break my truck every other time I drive it bs my buddy just bought a big rock and broke it the first run about to post a real video about arrma bec ppl act like there durable or something and that’s false can’t even lock tight the drive axles

Bro that build isn't that much

Bruh I have smaller wheels and tires on my erevo. Outcast 4s tires actually

Wl toys 124018????

Now the wheels don’t turn