Exhaust: going crazy Caleb’s face: pure excitement The scenery in the background: not moving

Okey that’s sick!!! My boy talented af.

The fact that it’s so slow just makes it more awesome! So many smiles and no speeding tickets 👍🏻

I never seen 49 HP make some one so happy. Nice build.

Man see man build exhaust. Man happy. 😃

Someone pointed out on the last video that the lifts could be a safety hazard the way they are installed. I hope you saw that comment. Just a reminder to check it out! Don’t want anything bad to happen!

Im going to post this comment a few times in the hopes that you see this. Do not read these comments as hate comments, These are people who enjoy your channel and want you to be safe. Please prioritize safety first. You can upload videos with non-lift projects while you sort this out. I have pasted 3 comments down below from professional lift installers on the subject: From @Marc11M Hey Caleb I install lifts for a living, if I was inspecting those lifts they would immediately fail because of the anchoring. I'm not as familiar with bendpak but every 2 post I've installed comes with 5-1/2 anchors which looks to be what these did come with. Most lifts want minimum 4-1/4 inches of 3000psi concrete with minimum 3-1/4 anchor embedment, as well as staying around 3-1/2 inches from cracks, seams in the floor, relief cuts, edges of the concrete, old anchors etc. which you can't see some of those issues with the epoxy already on the floor. Those anchors are pulled up way too far so either you don't have enough concrete or the concrete there is low psi or cracked/weak. I would guess you have maybe 1-2 inches of embedment on some anchors especially the ones near the drain, also since you cut off the extra length of the anchor that would also be an immediate fail due to that alone. With the little amount of room to move the lifts around in your shop I would seriously recommend you to remove the lifts and get new concrete pads poured. I do not want to see you get hurt or killed from those lifts failing please take my recommendation for your safety From @deanandrejevic1946 install, maintain and do insurance inspections on garage equipment in the UK and funnily enough used to fit Bendpak ramps and this 100% my thoughts. The bolts pulling up is extremely concerning. The cutting of the bolts is an instant condemn. Please please please get some concrete pads. I don't know if the specs in the US is different but 1m squared and 500mm deep is what we would recommend, but it will also say in the manual minimum concrete specs. It may seem overkill and a ballache but it's better than a lift falling. I've seen it happen and it isnt pretty. I see a lot of these videos and the fact Bendpak don't send professional fitters out when they ship the lifts is appalling. From @JessopRyan I fit lifts too, in the U.K. so the rules will be different. I agree those bolts pulling though aren’t good. We use Hilti bolts, I went to a training day about bolts and they are very confident even on expansion joints…. We don’t do it but they say you can. Safety First! You don't want to learn this lesson the hard way. Love ya, stay safe Gingium.

it sounds amazing, and it isn't really droney or annoying at cruizing revs, also the manifold is beautiful

Sounds sporty and throaty perfect exhaust for that little Kei car!

As a 3 cylinder owner (a 998cc not 600) who's exhaust rusted out effectively deleting the muffler I can atest to it sounding like a tractor at idle bit I couldn't help but like it a bit... It sounded so fast and like strong, then around the corner came a city econobox... Anyway, I like how this sounds

it sounds exactly like a mt-09 im in love

I’ve watched near to every video of yours since Donut reccomended you in the shoutout video. I have to say that I enjoy your videos the most from all the car channels I watch. From Rob Dahm, Drivetribe to Donut and Tavarish I can relate to yours the most even tho I don’t have the founds and motivation to play with cars as you. I think it comes to the “human” aspect of your videos. You are showing mistakes, you make silly jokes I can see that you are authentic in your work and that’s priceless. Thank you for all the hours of entertainment, all the smiles you’ve put on your and our faces and all the fails you made. I’m excited to watch your jurney. All the best from Czechia

$50 used large flatbed scanner and a flat ruler for scale. Pretty perfect for scanning flat surfaces to adapt to CNC. A cheap tv/monitor screen protector can be used to prevent metal parts from scratching the glass with metal parts. 50% of the time a photo does the job but it skews flat surfaces, so prevent wasted metal and time with a scanner. Only takes 2 min longer than taking a photo.

The ABC kei cars are the best, as an AZ-1 owner planning a 4 rotor build for track use

Your welds here are absolutely beautoful dude. Found you when you had the miata before it was boosted. What a long way you've come. These videos inspire me to learn how to weld as well. Thanks for making great content

You killed it with the exhaust dude🎉 sounds amazing!!!!

Created a 2/3 unequal length header! Sounds sick!

That looks amazing for your first full header/exhaust build man!

The joy on your face is priceless, cracking video as always 👌

I love it! It sounds so fast for how slow it is! Pure silliness ! 😂 10/10

this thing sounds amazing, good shit man

wow, that sounds amazing, another brilliant video Gingium!

If I’m being honest I wasn’t too much of a fan of the idea of him changing the exhaust setup because I didn’t know how much it would change the sound. But, my fucking god. I could sit here for hours listening to that shit bro lol. Fucking mind blown. Good shit Gingium.

Caleb this video quality and editing style is amazing and I am so proud to see how amazing it has gotten over the years. Your hard work is shown through your constant drive for fabrication and innovation. That said, THIS IS MY NEW FAVORITE EXHAUST NOISE😂

Love the vid, love the build, love the edits of cutting the piping with hands, love the drives at the end, instant smile, need to buy one for myself 😂

The Honda Beat sounds amazing dude. A blast to drive with that exhaust. Brilliant

My friend, it's so amazing to see you converting cars into super cars! Tbh, I'm in a whole different work field and I have to admit that I'm jealous of your skills! I really loved the video of the Volvo! Thank you for sharing! Gr from the Netherlands!!

Love the new lifts!

Pure joy ! Enjoyed this video ! Keep up the great work !

Awesome pipefitting Caleb, Solid work.

Honestly that sounds SOOOOOOOO good, reminds me of proper vintage cars, like british classics. Really sick.

Sounds so goddamn cool. Really like the muffler your chose too, very nice addition to the car

Absolutely love the pipe cut edits

She sounds GREAT! Perfect exhaust for the mini-NSX 👌

Always lokking forward to watch another video of you man

Love the internet coming round to Kei cars and Kei Trucks this last year or so. Such cool little things.

It sounds exactly like a 206 Dino Ferrari, which has always been lauded as being one of the best sounding cars ever made.

Sounds amazing!

I'm so excited for this build!

Now imagine that sound mated to the whining of a supercharge👌🏻👌🏻👌🏻

Love the cutting/karate chop transitions. Always great stuff Caleb

Great job dude.👊 The engine obviously loves the new breathing room.. Can't wait to see where the power curve moved as a result.

havent watched a vid since the rally miata / bus times. man has your recording and editing gotten insanely good like man that slow dolly pan across timelapse is amazing

Sounds so good. Reminds me of Durango 95

That’s the coolest sounding Kei Car Ever 😂😂😂

Bro the look on your face… it’s obvious that this is damn near the most fun you’ve ever had… definitely the most fun with less than 60hp.

I love your choice in music! Always great!

Great work! looks and sounds super!

That’s no joke. Thats pure.

I had d&d race exhaust on my 2013 thruxton 900! Bike got stolen a couple years ago 😭 loved that thing

Awesome vid quality dude. Well made.

I had a D&D exhaust on a Suzuki 750 years ago. I like it. 👍🏾

youre fab skills have come such a long way

This is a pretty interesting channel. Thanks for this.

You make this look easy. Great job!

Spotto the chopped fingers flag. nicely done!

Really cool build man, lots of fun in the edit too. Sub!

Great work. Great sound!

Sounds sick!

Sounds way more refined than I would have thought!

This guy does it all

Loved the pipe cutting edits

Sounds amazing ❤

sounds so good rate it 10/10 its just right

Sounds AMAZING

Sounds so dope!

that little thing looks like so much fun! makes me want to import one

I love this car and your work. Awesome man. A small car like that with a 3-cylinder or even a 4-cylinder cross plane from Yamaha would be absolutely sick.

nice work sounds sick man

Good job. Nice sound. It makes me think that I can do the one for my Caterham .

awesome. love it. nothing better than driving a slow car at the limit and especially one that sounds great.

Nice to a see a return to s nore cinematic style video. Please make more videos in that style!

this makes me so happy

I love the time laps pan shots damn

It reminds me of a J series with a nice exhaust note! Great job on the exhaust!

Damn... D&D fTW! That thing sounds amazing! I've got a D&D on my BUELL XB12STT and it also is amazing!

Amazing work ❤

Dude it’s sounds so good!!!!!

Epic job on the exhaust! Sounds Amazing! Side note: A Boilermaker once showed me you can draw a simple single "V" over the join for clocking your pipes.

good work kaleb!

It sounds great!

Looks good, quiet when cruising, popping when "playing", and loud/sporty at full throttle... Sounds pretty optimal in my opinion 👍

Looks and sounds so good

Amazing job damn!

22:51 This was the best part 😂 it sounds amazing but man, it looked so slow compared to your other builds. Loving this build series!

Can we take a moment to appreciate how good those new lifts look. Gahdang.

Frickin badass man!

Another gingium video! 🙏👍

That sound is SICK..on point perfection!!!!👊👌 Would be fun to see you do a 0-62mph how fast it is cuse it is not slow.

God that thing sounds so good

You should drop a Cbr600rr motor in that thing. Around 120hp would be a good jump from the original motor. I'd bet anything it would be a very easy install.. my first bike in the early 2000s was a 02 cbr600f4i. I put a D&D on that thing. Sounded great.

This video is so funny to me cuz I was a bike mechanic my whole life and years ago I put a D&D can on my Nissan 300zx and it sounded sick!

Dude this is awesome i had a D &D on an R6 and it was loud hahaha cheers

god that sounds so damn good!!

Thats awesome i would still add a 90 and tip so sound isnt going directly into underbody may help with any drone

good sound!!

Next time, when installing the v band, put the male flange up stream(the one with the alignment step protruding out). It helps seal with the flow of exhaust that way.

Yes! You finally snagged a Backpurge kit! Your exhausts and headers are gunna be SO much cleaner now brother

3:04 OKAY CALEB I SEE YOU ON THAT NEW DYLAN SITTS EP. This shit been on repeat nonstop 😂😂

Yup, I need one now