I Can't Believe I Waited So Long!!!....Best Way to Install Pocket Doors

Рет қаралды 934,982

3 жыл бұрын

In this video we take a look at a new method for installing pocket doors... wet setting the pocket door jambs. I show my traditional approach to installing a pocket door along with this new method of wet setting the split jambs with adhesive. This is a great way to get a perfect pocket door installation.
Pocket Door Installation Tools
Dewalt Finish Nailer 15 Gauge - geni.us/sG5L on Amazon (commissions earned)
Milwaukee 18 Gauge Finish Nailer - geni.us/aGN3m on Amazon (commissions earned)
Dewalt Multi Tool - geni.us/aruNED on Amazon (commissions earned)
Stabila Jamber Level Set - geni.us/YITBRir on Amazon (commissions earned)
GRK CAB8112HP Cabinet HandyPak 8 by 1-1/2-Inch Screws, 100 Screws per Package - geni.us/3xiKDo on Amazon (commissions earned)
0:00 Pocket Door Installation Time Lapse
3:35 Intro
4:38 Shimming the Strike Side Jamb
7:28 Micro Shimming the Strike Jamb
9:44 Ripping Split Jamb Pieces
12:57 New Method For Split Jambs
17:07 Applying Adhesive to Split Jambs
18:00 Setting the Split Jamb
21:00 Installing Head Jambs
My Favorite Tools - Insider Carpentry Amazon Site - www.amazon.com/shop/insider_carpentry
Support more content like this by becoming a PATREON SUPPORTER - www.patreon.com/insider_carpentry
INSTAGRAM - insider_carpentry

Пікірлер: 714

@InsiderCarpentry 3 жыл бұрын

As an Amazon Associate I Earn from Affiliate Link Purchases - Thanks for your Support Pocket Door Installation Tools Dewalt Finish Nailer 15 Gauge - amzn.to/3emrmNX Milwaukee 18 Gauge Finish Nailer - amzn.to/3yVWAmM Dewalt Multi Tool - amzn.to/3hB9TDj Stabila Jamber Level Set - amzn.to/2UfQBdL GRK CAB8112HP Cabinet HandyPak 8 by 1-1/2-Inch Screws, 100 Screws per Package - amzn.to/3B3QvGP

@robertcasey7312 2 жыл бұрын

I’m looking to buy a new table saw. You use a DeWalt, right? Will it cut dados? Can you please tell me the model? A corded model is fine for me. Thank you.

@MikeDolanFliss 2 жыл бұрын

While you're at it - what's that extension table on your jobsite table saw? Something you made, or off the shelf?

@stevehattdrums4307 2 жыл бұрын

Where can I purchase the fixings for the door to frame. Many thanks

@henry2009ish 2 жыл бұрын

What is the adhesive you recommended?

@timking1050 Жыл бұрын

I like this way too , been doing 45 years, it's a great method

@robinholbrook6576 Жыл бұрын

I’m a 76 yr old woman. I’ve been wanting to to replace a worn pocket door for a decade. The carpenters I’ve had over (about 5) have told me it’s impossible! They have ALL said it has to be done when the walls are OPEN! Well! Guess what? After watching your video I’m going to do it MYSELF! I’ve installed a kitchen sink and faucet, rewire d lamps, made molding, and some other DIY things. With your excellent guidance I’ll just do the door! THANK YOU! 🌹

@BurgardPottery Жыл бұрын

Good for you girl! You sound like me. I had a plumbing job once that required thinking outside the box, the plumber on site said it couldn't be done.....Next time he was over I explained exactly how it could be done. He's said "oh, I guess that would work". :)

@ChromeLuxx Жыл бұрын

If you’ve had “carpenters” that said a pocket door can’t be replaced, they are not carpenters. Possibly it’s what you are asking to replace it with that’s the problem. I’ve had clients insist that none of the trim be removed or a much thicker repurposed door be used without reframing. It is possible the customer does not understand what is required. I love when a client believes they have a better understanding of plumbing or electrical…from a KZfaq video. Not saying I too can not learn, but 99.9% of the time there is no understanding of the mechanics and requirements behind the systems.

@WEBSTER420 Жыл бұрын

The pocket frame is existing. The trick he’s talking about is tricks for trim install

@WEBSTER420 Жыл бұрын

The tools required are expensive and take time to hone the proper skill off you should just look for a better contractor

@olbabybeard Жыл бұрын

So how'd it go

@tpadgett2 3 жыл бұрын

I'm a damn good carpenter. I've put in the time and work and am a constant student of the craft. That being said, literally every time I watch you do something new or a technique I am unaware of, I am blown away by your understanding and ability. I have learned several methods and techniques from you that I genuinely use all the time. You are a level above, my friend.

@InsiderCarpentry 3 жыл бұрын

That's awesome. Glad I could expand your knowledge base brother.

@jonq8714 2 жыл бұрын

Well he does a really good job boiling it down so us non-trade DIY'ers can do a decent job and not screw it up royally too.

@kennethvogt9379 3 жыл бұрын

It’s not just you know what you are doing, you are good at explaining it.

@jimbalbierer638 3 ай бұрын

After 40+ years as a commercial carpenter I know my way around the job site. But I always seem to find a new trick when working around my house by watching you. Thanks so much for your contact.

@darmichar73 2 жыл бұрын

Love the new intro style where you show the entire process, then explain it. Gives you an opportunity to take it in, then understand the instruction better.

@MrNaliux 3 жыл бұрын

Just the preview was enough for me to do improvements on how I hang pocket doors. Still watched the rest of the video for pure joy. Always great content! Thanks

@InsiderCarpentry 3 жыл бұрын

Glad it was helpful!

@dosadoodle 3 жыл бұрын

+1 to the solid walkthrough at the start, followed by a full explanation and detail. It's a nice video style that I don't see often enough.

@HandyOleManny 2 жыл бұрын

I'm really liking your channel. I've been trimming custom homes for nearly 20 years with my two sons. A couple years ago they moved away so I'm on my own at 60 years old. Your videos have made me want to improve the quality of my work. I've learned some time saving, quality improving methods that I'm sure we'll separate me from the slam bang production guess. I've changed my " headed towards retirement thinking" to "I've got some good years left, make them the best". Thanks so much. Scott

@nunopires2106 2 жыл бұрын

My father is a carpenter and I really like watching carpentry videos. Glad I found this channel

@Lyleartist 2 жыл бұрын

I started framing before you were born, started trim about when you were weaned and got into cabinetry probably about the time you got your training wheels taken off. I still learn tricks from you that make me wonder why I never thought of it. Keep up the clean work and keep teaching me!

@wikster6630 3 жыл бұрын

Having set hundreds of pocket doors over the years, this is by far the best way to do them! Wish I had thought of it years ago. In my area we end up using the Johnson metal frames with a wood core 90% of the time. Attaching the split jambs to them is tasking. The "wet set" method would make it so much easier. Great video and explanation! Definitely going to implement on next install. Thanks

@randallbasye7327 2 жыл бұрын

I’ve been a production trim carpenter for 22 years, I installed three pocket doors this way today, I’m not sure if it’s faster but the quality is great and it’s a lot easier.

@juanrendontorres174 2 жыл бұрын

Unfortunately that's the trade off... Quality or Quantity when it comes to production work.

@catherineskis Жыл бұрын

Oh I'm so glad for you. I live in Grand Junction CO and we have baseboard heaters out here, kin to radiators. In the Master's bath we have a baseboard heater and to the left of it is the linen closet with bifold doors. The doors are misaligned and are ganking up the wall. I am trying to convince my daughter to remove the drywall around the baseboard heater and install a pocket door. I am encouraging her to watch this video and your comment has encouraged me that this is possible to help her along.

@rockinrod1 2 жыл бұрын

Great idea for the split jams.I could make one suggestion when installing the top split jam.I screw in the top split jam on the side with the door leveling adjustments nuts with screws with finishing caps.And I also do not nail the top casing to that jam.If the door warps or when the house settles or framing twists.I can readjust or remove the door with out doing damage to the finish trim. Happy wood working.I enjoy your channel.

@ScottReynolds003 2 жыл бұрын

Good tip. After 30+ years to still learn new tips is awesome. I will definitely try on my next set of dredded pocket doors.

@slicktype001 3 жыл бұрын

Literally EVERYTHING you put on here is a “Master Class”. Dope content as always 🔥🔥

@InsiderCarpentry 3 жыл бұрын

I appreciate that!

@Saskia.8. 3 жыл бұрын

Absolutely agree. Thank you for everything.

@luispineda1214 2 жыл бұрын

when the rail is uneven it is a problem, because you put the outside door level and inside it does not give the level, it is better to fix it, right?

@7628739 Жыл бұрын

Whatvi notice is your consistency to detail, no stone left unturned. I did my first mitre crown job last week. There were other contractors on site . They thought I had been doing this a while. I give ma y thanks for you share your years of knowledge to us. You made me look good. I will never tell them it was my first. Job came out very good. .details..details

@johnlivsey4146 Жыл бұрын

Dope? How classy. More like ghetto.

@catherineskis Жыл бұрын

Dear Sir, I can tell from the comments that other gentlemen are quite impressed with this method. I am going to encourage my daughter to watch this for me to help the problem that I have in my bathroom. Thank you. Love from CO, USA

@drewt9829 3 жыл бұрын

It is a pleasure to watch a true craftsman work their trade.

@odie00zero Жыл бұрын

I have to install a pocket door today and I knew reviewing your channel would save me hours of “reinventing the wheel”. Thank you so much for making this video. Just got home and can I say the pocket door looks better than everything else in the house. Thank you so much for the video!

@jlm3303 2 жыл бұрын

I love when someone is able to teach me something... at my age I'm not exactly a good student as I get set in my way of doing things. I very much appreciate your sharing of your experience.

@AngelRivera-bs7uf 2 жыл бұрын

Everything you do is high quality, from your carpentry work , to your video and editing! That says a whole lot . I learn a lot from your videos . Thank you so much . God Bless 👍🏼

@jeandaigneault6667 2 жыл бұрын

The best tutorial by far for pocket doors installation ! Bravo!!

@carpentrylover145 3 жыл бұрын

I love the grk trim screws with reverse threads. So easy to tweak trim back out if need be

@paulbettencourt9657 3 жыл бұрын

Great pocket door install! Can not for the life of me figure how someone could dislike this video!?!

@tomruth9487 2 жыл бұрын

Paul Bettencourt, Maybe a painter that likes to paint all the doors outside in the garage at once? But I agree, it's a great video.

@denistrudel-bk2us Жыл бұрын

I have seen and worked with some of the very best in carpentry. You are right at the top with them. Often, you one up them. Great video's. Great teacher. Keep it up Mr Lewis

@bobbybriggs1840 2 жыл бұрын

Per anni ho cercato un video come questo! Finalmente qualcuno che si distingue, e fa vero artigianato!! Bel lavoro!!!

@andriy_moskalyk 3 жыл бұрын

U are insanely good, I developed a great method after 15 years doing high end finish carpentry, but this one is just sick. For paint grade trim there is nothing that can beat it

@realworldcarpentryremodeli5868 3 жыл бұрын

Ok. That’s pretty awesome. I’ve probably hung 40 pocket doors maybe more . Usually 1 every now and then. That’s the slickest thing I’ve seen in a long time. Thanks

@art58wong 2 жыл бұрын

You sir are a true craftsman. As a hack, I installed one pocket door and was just happy to see it slide into the wall. Your technique and attention to detail is orders of magnitude higher. Wish I saw your video first.

@scottyman-ey6bf Жыл бұрын

this is not this guys first rodeo , BRILLIANT craftsman

@josueperesestrada5494 2 жыл бұрын

Man! I was struggling just thinking about how to install these doors and after I saw your video I just feel like an expert without even installed one before! You are the MAN!!

@petermaslow7136 Жыл бұрын

Very impressive - thank you for your tips. This is the best way I've never tried installing a pocket door, but will next time. Sharing with friends! I've been renovating Brooklyn brownstones for 30 years - these are never air conditioned spaces, there's never any room, you're always fighting plumb, square, straight, etc. Not to mention the NYC overhead. This saves time and there won't be any call backs for repairs. Cheers!

@whitebeardpainting2309 2 жыл бұрын

*The trim crew is what makes a great interior because when we Painters would come in we would have to fix big gaps as we caulked and puttied out the house, then we would prime it all out top to bottom. Of course prepping all of the windows. After priming came the fun work of sanding her out. Great video man!!!!*

@robertmeadows1657 2 жыл бұрын

You have a real gift for clearly and concisely explaining your process.

@matthewsaltzman5573 3 жыл бұрын

Oh. My. God. This is one of the best things I've learned this year.

@FancyPantsFiles 2 жыл бұрын

The first 3 1/2 minutes of this video were so useful to me. I eventually watched the entire video and gained more insight. In a pinch, though. I was very grateful. Never setting a pocket door another way if I can help it! I love your videos!

@DaveSender66 3 жыл бұрын

I've been in this business for many years doing all different types of carpentry. I've learned a lot by watching and listening to your videos. Thank you very much for sharing your knowledge and expertise with us it is much appreciated. I find it hard to believe that you don't wear safety glasses. I personally have avoided numerous eye injuries because of safety glasses. I've had one too many close calls especially working on the table saw. I do not should people. However I do believe safety glasses are a must when working with power tools. Thank you for the content that you produce and I hope you continue to do so!!!

@foreman3737 2 жыл бұрын

I have been installing them doors for years . I really like that " wet set " idea I will definitely try that. thanks for the tip.

@joshuareed3999 3 жыл бұрын

Really great video. I have been trying to master pocket doors for years, and they never seem to come out right! This is amazing. Thanks for the content as usual sir!

@pattycakedrummer6465 2 жыл бұрын

I just did 4 pocket doors like this on a project. Amazing how efficient this was and how easy you made the process Thanks

@zitobin1 3 жыл бұрын

Thanks for sharing mate, really great info. Your channel is quickly becoming a shrine for carpentry knowledge

@InsiderCarpentry 3 жыл бұрын

That's the goal!

@mikegage4933 Жыл бұрын

Have never heard of "wet setting" but it looks like a game changer! Thanks.

@kirkhepburnmiddleagedwhiteguy 2 жыл бұрын

You're an excellent instructor.

@charlesjohnson7222 2 жыл бұрын

One of the best systematic repeatable methods I’ve seen in a long time.

@rodpotts2666 3 жыл бұрын

Got one coming up . I’m going to give it a try. Pretty excited to try this out.

@zaneh6224 3 жыл бұрын

Mate the content you put on KZfaq is the Gold Standard 🦘👌

@armedmariner 8 ай бұрын

I have to install a pocket door. I have done many of them in my life but I wanted to check KZfaq for new ideas. Wow! Glad I did. Wet setting is awesome. I love smart people! Thanks man. Needed this.

@ottokriete1153 2 жыл бұрын

I've been a finish carpenter for 46 years.......... this is simple and brilliant. Can't believe I never thought of this.

@blisspop6193 3 жыл бұрын

Dude, this is gold! A master ninja class,...you explain the "why" and the "how" all while you're filming yourself doing it.. Where is HGTV and DiY Network? You really need to go main stream. Your last few videos are totally next level!

@HEARTANDSOULOFMINE 2 жыл бұрын

I have wondered this myself! He should have his own HGTV show!

@junkyarddawgs9956 3 жыл бұрын

Now we are doing soft close pocket doors around my side of town!!! Nice technique will try!!!

@briancorboy1042 3 жыл бұрын

Thanks for putting this out. I'm going to share this with my employees. 👍

@gregoryenste3883 3 жыл бұрын

Just wow! This tip is a game changer. Thanks. Also the painters are going to thank you. I always try to look out for other trades following me..

@carllamb6711 3 жыл бұрын

Your good real good 👍 i’ve been a joiner all my life and I’m still learning thank you excellent craftsmanship 👍👍👍👍

@nb6011 2 жыл бұрын

This is revolutionary. Great work

@stevenvachon9745 2 жыл бұрын

Great idea with the wetset technique. A few things I like to do to take pocket doors to the next level is... notch the flat jamb up into the track space to cover the framing...who wants to look at framing in a finished home? Another great upgrade is to dado the flat jamb 5/16" and slightly wider than the door so it sits into the pocket. This insures there is no gap if things move around in the future, it also balances out the look with the rest of the jambs. Lastly, I also set the guides on the inside of the split jambs so you can't see them or have them break. This of course is on cheaper pocket door hardware. Ideally I like to use a roller guide and a track set into the bottom of the door. Also on this level using a soft close mechanism is appropriate.

@j10001 2 жыл бұрын

Excellent suggestions!

@bonzai55 9 ай бұрын

Doesn't concealing the guides limit future adjustment?

@stevenvachon9745 9 ай бұрын

@@bonzai55 I find that with the guides set in, they are protected and more stable and once set correctly, they don't need future adjustments.

@nerfdano1356 3 жыл бұрын

Your videos never disappoint. I wish I could train under someone like you.

@21847835g 2 жыл бұрын

Such a good video. Very clear explanations and step by step process. Great camera work. Good use of high-speed. I like the idea of a time lapse installation intro. Many videos don't show the end product until a very brief shot at the end. It's good to have seen the target end product and then showing how you got there. I've installed pocket doors before and this is definitely a better process.

@davidhumeston5292 2 жыл бұрын

Well thought out... Nice job... really like the wet set idea

@backdraft808 2 жыл бұрын

I have ONE pocket door...thankfully. This vid was a massive help! Keep up the good work.

@mackinnonremodeling 2 жыл бұрын

Just used the PL 375 for oak treads and it worked great with minimal nailing

@customwoodshiftknobs9322 Жыл бұрын

Getting ready to do some pocket doors for the first time on our log home build, plan to try this technique thanks so much!

@gte2133 2 жыл бұрын

Very impressive! Beautiful work!

@bobbray9666 Жыл бұрын

I installed aluminum Cavity Sliders pocket door frames. Easy to install, no warping and buttery smooth operation. The split jambs you rip to around 1-1/4" wide and then rip a dado down the back of it and it snaps into the aluminum jambs with the provided clips. No worry about the track being off centered and no warping like wood frames. They are more expensive but you're going to get a perfect install if you just install the frame level and plumb as one piece of aluminum frame after easy assembly. Also great for heavy solid slab doors that break cheap rollers of the cheaper wood frame sets. I got the soft close option and it's awesome.

@lisaferrara8120 3 жыл бұрын

Excellent explanation for installing pocket doors. Thank you, Spencer, for sharing your knowledge!

@InsiderCarpentry 3 жыл бұрын

Glad it was helpful!

@yt66228 3 жыл бұрын

Beautiful work. I am now installing doors in a new way.

@theothermarshal 3 жыл бұрын

Super accurate, proven method. Thanks for sharing!

@crownmoldingbyspectaculart941 Жыл бұрын

You’re putting out really helpful content for anybody that is aspiring to be a finish carpenter

@MrTHEBRITINWA 2 жыл бұрын

Ace workmanship.

@jamesmchugo9422 2 жыл бұрын

So simple and easy! Thanks for the video. 👍

@andrewmarcinko1796 3 жыл бұрын

I set a few pocket doors years ago. Wish we woulda thought of this method. Good info to know for the future. 🏠🔨

@SnootchieBootchies27 2 жыл бұрын

Liqui-shims on the pocket side. I like it. Definitely makes a lot of sense for paint grade.

@ginoguerrero7788 3 жыл бұрын

you're a very fine carpenter , I really enjoy your tutorials

@normanjacques4092 3 жыл бұрын

Wow. Super cool. I've been doing this a long time and I've never seen a pocket door installed that way. I try to avoid pocket doors as much as possible because of how poorly they work overtime. I only watch 4 minutes in the video and I am on board. Nice work great job thanks for the video

@stevenfoust3782 2 жыл бұрын

Excellent tutorial!! Always looking for ways to raise the bar and this just took what I previously considered crap to a craftsman level.

@davidgranderson5435 3 жыл бұрын

Like how you mitered the door trim. Looks amazing!!

@georgelutz8212 3 жыл бұрын

Another great lesson.Thanks .

@jamartin1 3 жыл бұрын

Wow! Game changer!! Thank you for sharing!!🙌🙌

@jeffgrunden1098 9 ай бұрын

Getting ready to install doors in new project, great tips and simple to follow

@Bigelite094 3 жыл бұрын

Beautiful.

@thomasalison6188 3 жыл бұрын

Another awesome class, thanks Spencer!!

@louisnemick1939 Жыл бұрын

Thanks Mr. Lewis for the information I appreciate it.

@daburg11 3 жыл бұрын

Beautiful work!

@evanisaacs3086 3 жыл бұрын

Very good explanation of this method.

@robwright3064 3 жыл бұрын

Watching your content makes me want to become a trim/finish carpenter. I live about 35 miles west of where your based. I’ll certainly reach out if/when we ever need wood work in our house!

@Johnlt13 2 жыл бұрын

I’ve always hated trimming pocket doors. After seeing this video I can’t wait for my next pocket door install. Thanks brother this is a game changer

@stephenstanko6111 2 жыл бұрын

Very clever. Great explanation of how to do this.

@joecanney3521 2 жыл бұрын

Beautiful touch!

@MichaelJones-sd7vp 6 ай бұрын

I have set quite a few pocket doors and prefer to hang the door before drywall. Not always possible, I must say that I learned something watching this and appreciate you sharing your knowledge. Keep getting up mister. well done.

@degrom542 3 жыл бұрын

Gotta love the wet set method

@susoni1 2 жыл бұрын

Master genius at work! 👍

@andrewroque1 3 жыл бұрын

Thank you! Always impressed

@martink9619 4 ай бұрын

Perfection, awesome instructions...

@jamesurquhart1289 3 жыл бұрын

Nice Job. I like the way you make as many of your projects as possible a series of similar steps. The recipe for success. This is one of my favorite channels. Keep up the good work.

@Anthonycapone8146 Жыл бұрын

WHAT!? That is awesome!!

@hugomora7873 2 жыл бұрын

Definitely will try this in my next project. Great video! 👏🏼

@JohnDoe-kp3sw Жыл бұрын

Perfect.

@KauaiDroneWRX 2 жыл бұрын

That’s awesome! Nice technique!

@paulmarciello6822 2 жыл бұрын

Love you’re videos my friend, you’re awesome at what you do and you’re also a great teacher, I just started my own business and you have helped me a lot. Thank you!!!