@tyfrank3427 3 ай бұрын
Those are not remnants of home made hydraulics. Those are remnants of the factory hydraulics. The tank and valve are the correct ones. All that's missing is the pump and hoses. That's a fuel pump, not a diaphragm fuel shut off. Originally they didn't have a sediment bowl on the tank, just at the fuel pump. Never run in firth gear off road.
@lohiacres4651 3 ай бұрын
That makes sense. I was confused the diaphragm pump as fuel shut off. Yes, the tank sediment bowl was a later addition. I wasn’t sure about the factory hydraulics. Happened to see a Farmall MD today and it has exactly the same tank, valves and has the missing hydraulic pump Thanks Ty for your valuable information
@very5ick112 3 ай бұрын
yeah what he said : Never run in firth gear off road
@paulmurphy5964 3 ай бұрын
I see why you couldn’t resist. Nice seeing the parts new and old presented the way you did. Good job.
@gonerydin4225 3 ай бұрын
My Grand Dad had a W-9 when I was a small boy, 65 years ago. In the spring 3 men would take shifts plowing with it 24/7.
@lohiacres4651 3 ай бұрын
The guy I bought this from has almost the same story. Yes she is a beast
@Patrick-xd8jv 3 ай бұрын
We had a WD9 to pull a 5 bottom plow. For “fun” once, I hooked it up to a 22’ 480 disc and it pulled it fine, but slowly. Best to turn the steering wheel while rolling 😬
@virginiagraber9070 3 ай бұрын
WOW Nice. W-9 DAD Years ago, Awesome!!! Thank you. (Naaman ,Indiana)
@wilmamcdermott3065 3 ай бұрын
I ran one of those thumb wreckers pulling a breaking plow was rough on the fingers at 8 years old. My dads was a WD9 super
@timd5343 3 ай бұрын
luv them old girls
@user-fx5fz3pr5x 3 ай бұрын
Nice to see her running!!
@deweydodo6691 3 ай бұрын
Fuel pump bolt down on our tractor has a plate over. Gravity feed works just fine.
@rusttrail3 3 ай бұрын
What a gorgeous tractor, I love this, it's like a Farmall on steroids. 🤣
@charlesschulz8416 3 ай бұрын
We had International harvester company set up shop in Australia in 1912 making farm implements later tractors but also opposition company's like fordson, Massey Harris, nuffield, Massey Ferguson , Chamberlain tractors Australia the company was eventually bought out by John Deere
@gilreynolds9282 3 ай бұрын
Good job cleaning the carb
@TMxl-w5t 3 ай бұрын
You need to leave the subtitle/graphics on the screen longer.. Cheers 👍👍
@lohiacres4651 3 ай бұрын
Thanks. I have noticed it after the video is uploaded. Will keep a watch on this next time
@TMxl-w5t 3 ай бұрын
@@lohiacres4651 Thanks 👍👍
@mattthescrapwhisperer 3 ай бұрын
New sub here. I'm an International/Farmall guy myself.
@wilmamcdermott3065 3 ай бұрын
Big enough to do most things on the farm back in its day
@jefferystrange7476 3 ай бұрын
Nice find and great clean up on those parts. What did you use?
@lohiacres4651 3 ай бұрын
Regular parts cleaner from Princess Auto. Can’t remember the brand
@brokenwrench1 3 ай бұрын
what does the large lever do that is to the right of the seat. IH had a W9R made for rice, a hand clutch was installed so the driver could stand up and clutch the tractor
@lohiacres4651 3 ай бұрын
That lever is for locking the brakes when parked. This one has foot clutch
@wilmamcdermott3065 3 ай бұрын
Loved the case 932 i had
@lohiacres4651 3 ай бұрын
The one you see is case 931. She smokes a bit, but otherwise a good runner
@wilmamcdermott3065 3 ай бұрын
@@lohiacres4651 nice. I did sleeves pistons and heads on mine. 2000 hrs ago 2500 dollars
@lohiacres4651 3 ай бұрын
@@wilmamcdermott3065 I know, it’s not cheap to work on a tractor
@wilmamcdermott3065 3 ай бұрын
@@lohiacres4651 less expensive than johndeer . just did the engine on my old dozer D7c17a heads sleeves and pistons. 7000. I need it for fire fighting here in alberta after our communist leader set us on fire
@lohiacres4651 3 ай бұрын
@@wilmamcdermott3065I hear you. Coincidentally I have a Cat D7E 17A. She needs some tinkering
@davidvogel6359 3 ай бұрын
what did the fluids look like, engine, transmission, rear end, radiator, gas tank? looks like it could be a good one.
@lohiacres4651 3 ай бұрын
Fluids are all looking good except the engine oil little murky. The gas tank sediment bowl had varnished gas, so needed some cleaning before the start
@jackmill4235 3 ай бұрын
That is not a home made hydraulic handle.
@lohiacres4651 3 ай бұрын
You are right. Those looks be all aftermarket items installed after the fact. Edit: Some forums says they are IH factory offered add ons. Not sure
@deweydodo6691 3 ай бұрын
They look like newer hydraulic parts off a 600/650
Kenny Kizzle Rusty Nutz Ranch
Рет қаралды 3,8 М.
G.L.O.C.K
Рет қаралды 3,3 МЛН