I Failed At This! Don't Do What I Did With Your Rainwater Tank!

Рет қаралды 6,769

Country Living Experience: A Homesteading Journey

2 жыл бұрын

I Failed At This! Don't Do What I Did With Your Rainwater Tank.
DISCOUNT CODES!!
Grower Solution Discount: www.growerssolution.com/ Discount Code: CountryLiving10
Get Your GrubTerra Treats Here: bit.ly/35CUV9Z Don't Forget Your Discount Code: CLE
Help our family by shopping through this Amazon link: www.amazon.com/shop/countryli... Or Support Us With PayPal at countrylivingexperience@gmail.com.
Hengear Nesting Boxes and accessories: hengear.com/discount/countryl... DeWitt Sunbelt Weed Barrier amzn.to/3vvdfMs
Emergency Items We Own:
Butane Cooking Burner: amzn.to/3rbVmAj
Primus Camp Stove: amzn.to/3sLqvLc
Isobutane: amzn.to/3uLvJsr
Mr. Heater: amzn.to/3bUCLlV
Sunglife Survival Radio: amzn.to/3qbKD7L
Solar Cell Phone Charger: amzn.to/3q8Nezn
Crosscut Saw: amzn.to/3bW3eQc
Scythe/Snath: amzn.to/3bdCTOx amzn.to/2PvDVNr
Items Used To Start Our Seeds:
Jiffy Peat Pods: amzn.to/3rtqaMA
Metal Racks: amzn.to/3oYsU2T
Barrina Grow Lights: amzn.to/3tDW0IA
1020 Grow Trays: amzn.to/2LuMF4v
Heat Mats: amzn.to/36W6lpv
Rack Cover: amzn.to/3cRX2KZ
Humidity Domes: amzn.to/3rzED9S
Pot Labels: amzn.to/36TDm5K
2" Seed Starting Pots: amzn.to/36OZK07
Tools And Products We Own And Recommend For Your Homestead:
Dewalt impact driver: amzn.to/2ptNXBY
Granite Ware water bath canner: amzn.to/2CQquOn
Bear Grease waterproofing compound: amzn.to/2CNDBzO
Greenhouse film: amzn.to/2poM2yn
DB Smith pump sprayer: amzn.to/2Qr9o1m
Marbles small camp axe: amzn.to/2KsbuKT
Cold pressed orange oil: amzn.to/2KvaaXo
Sea-90 organic mineral fertilizer: amzn.to/2rK9cA2
Pure neem oil: amzn.to/33WTmR4
Products We Own And Recommend For Your Garden:
Flame Weeding Torch: amzn.to/2Zf2Is3
Worm Castings: amzn.to/2mboTh8
Neem Oil: amzn.to/2ZgBDka
Rock Phosphate: amzn.to/2TJyE2L
Chapin Garden Sprayer: amzn.to/2KHld06
Garden Ties: amzn.to/2HgYk1H
Professional Weed Barrier: amzn.to/2Hhm7hM
Greenhouse Film: amzn.to/2KG3Ahj
Thanks for stopping by and don't forget to come see us on:
Our Site: countrylivingexperience.com/
Facebook: / countrylivingexperience
Pinterest: / pins
Instagram: / countrylivingexperience

Пікірлер: 89

@deanbarrett511 2 жыл бұрын

Just an FYI the plugs that come from the factory are not sealed or supposed to be water tight they are there to prevent stuff getting into the tank during transport and storage. . You will almost always have a valve on the bottom of each tank so they can be isolated if you ever need to service or clean a tank and not have to drain all of your water. You also have another potential fail by connecting between tanks. If you have 2 tanks to connect you want both bottom bulkheads pointing in the same direction and connect with a pipe along the side. These tanks bulge when full and if you plumb a hard pipe in between there will be stress on the bulkhead fittings and may cause a leak or eventually cause a crack in the tank. In case you're wondering I have been in the plastic tank business for 36 yrs. and have taken RWH certification courses.

@CountryLivingExperience 2 жыл бұрын

Thank you for the tips.

@kcmgfarm2389 6 ай бұрын

I love channels that will show the mistakes, those videos are more helpful in my opinion. Thanks for posting this. Kate

@CountryLivingExperience 6 ай бұрын

Cool, thanks. I am trying to keep it real.

@Digidoc316 2 жыл бұрын

When setting up a tank, install shut-offs on all your taps. That way, you can install or service pumps, level gauges, or daisy-chain tanks without having to drain the tank. Also, position the debris separator in such a way that you can collect the debris for the compost pile or reactor.

@CountryLivingExperience 2 жыл бұрын

Yep

@raincoast9010 2 жыл бұрын

Remember when you join the other tank you need to allow for expansion relief. Also you might want to be able to fill and drain the tanks separately.

@CountryLivingExperience 2 жыл бұрын

Yep. Absolutely.

@rw-xf4cb 2 жыл бұрын

you only need one bulkhead for equalization, supply via a pump and for filling from another source. I always use a gate valve then a T fitting this gives 2 options for use after the valve. ALSO put the gate valve on as the first connection on the tank - as you have it if something bumps that pipe you could damage it and lose your water.

@buildingsoloinarizona1987 2 жыл бұрын

Good decisions come from experience. Experience comes from poor decisions. Keep plugging away brother. You're living the dream!

@CountryLivingExperience 2 жыл бұрын

Absolutely! Thanks man.

@rw-xf4cb 2 жыл бұрын

Also get some 1000L (250G) IBC tote as they can capture the water keep for animals, garden and/or fire fighting....

@spudrubble 2 жыл бұрын

Might consider a few drops of food grade mineral oil on that ball valve. Had one on my 1500 gallon tank and they can get mighty stiff to turn.

@CountryLivingExperience 2 жыл бұрын

Great tip. Thanks.

@joemurphy6206 2 жыл бұрын

Another great video! I’ve worked wt my hands my whole life so I’ve got my mind wrapped around making mistakes, but I believe this video will deliver a lot of folks from discouragement who are just getting started🙏

@CountryLivingExperience 2 жыл бұрын

Awesome! I want to help everyone through my failures and successes.

@rsandi9646 2 жыл бұрын

Make sure to fix any erosion now at the base of your tank. It should be good and packed from the weight of 2500 gallons of water. But if there are any missing or soft spots now underneath, it will lean when full.

@CountryLivingExperience 2 жыл бұрын

Absolutely

@kenlyn2208 2 жыл бұрын

I've had this situation a work, at few times. Pull the plug but have your value open. Thread while it's pouring. Takes two people. Saved about 3/4 of the tank.

@CountryLivingExperience 2 жыл бұрын

Thanks for the tip. I shouldn't have to worry about it again.

@jdollar5852 2 жыл бұрын

Doing things 2x is a way of life. I routinely screw up the simplest things and wind up having to redo things, turning a 2 hour job into a 2 day job. We are fortunate to have a 2.5 acre lake about 100 feet from out door as well as a year round stream along the back of our property so our emergency water needs are covered. We have city water and trash pickup so we will stay hooked up in that regard.

@CountryLivingExperience 2 жыл бұрын

I hear that.

@rickthelian2215 2 жыл бұрын

Hope you get some rain soon....

@CountryLivingExperience 2 жыл бұрын

We’ll get more for sure

@zuzax1656 2 жыл бұрын

One thing I thought the other day, if you are using the water only for the gardens, you're ok. But, if it's going to the house, you might consider a DE or sand filter (swimming pool filters). They'll remove most algae, dirt, bird poop, etc., from the water making it less stressful on the sanitation system you have. Chlorine tabs and dispensers are another thing to consider.

@CountryLivingExperience 2 жыл бұрын

Absolutely. All good suggestions. We will probably do a whole video or two just on filtration when we eventually pipe it to the house.

@debbiemoore4228 2 жыл бұрын

Awesome job dog. Check out " Off Grid With Doug And Stacy" they have a 7 ft drop, " no pumps no problem " is his moto, working for 10 yrs now. Thx, lots of good info.

@CountryLivingExperience 2 жыл бұрын

Yep, I watch them all the time.

@ProvidingResources 2 жыл бұрын

Thank you for sharing your experiences. 💖💖We are looking into some type of rain catchment system for our garden. We are researching and came across your video. The best life lessons are those taught the hard way. However, your lessons are a blessing viewers like us. Thank you for sharing your journey. I appreciate this! Can you grade the ground so the water runs away from the tank?

@CountryLivingExperience 2 жыл бұрын

Thank you for the kind words. We are happy to share. Yes, we will continue to grade away from the tanks so that the area is stabilized.

@frodrickfronkensteen9241 2 жыл бұрын

Probably late to this conversation... but don't punch any extra holes in your tank if you don't have to. Simply "T" off your supply. One branch of the "T" goes to the first tank. One branch of the "T" goes to second tank. "Bottom" of your "T" supplies BOTH tanks to the pump. And don't feel bad about the wasted water. We all do it. I hate to even mention this but... dude, it gets worse with age. Keep your sense of humor... you're going to need it ;) Hang in there. Good video.

@CountryLivingExperience 2 жыл бұрын

Thank you and yes. We got that advice from a few others. We have not added the pump yet but will be modifying where we pull the water from.

@frodrickfronkensteen9241 2 жыл бұрын

@@CountryLivingExperience In my search for booster pumps... I came across a brand called "Walrus" (I think). It seemed reasonable in price. Don't know if that helps, but... there it is. If you have a pump brand you are keen on, please share it. I'm still shopping/saving for our booster pump.

@CountryLivingExperience 2 жыл бұрын

Thanks. We have been looking at the RainFlo which seems reasonable. www.rainharvest.com/pumps-and-controllers/above-ground-pumps.asp

@waltereason832 2 жыл бұрын

I would suggest using a brass nipple to a brass valve, in the case something hits the pvc pipe it will break after the valve and you will not loose the water. If this happens after a SHITF situation it could be real bad. Pile dirt around the valves so if there should be a sudden freeze there is no way the valve will break. I am in an 8B area and the water seems to be a heat sink to valves that are close to tank and metal.

@CountryLivingExperience 2 жыл бұрын

I hear ya. Thanks for your thoughts on it.

@marilee324 2 жыл бұрын

Another approach to supply....since ading another bulkhead adds another potential leak at the tank and are expensive...you could have added a tee or tees down stream of tank valve to pipe to suction side of future pump.

@CountryLivingExperience 2 жыл бұрын

Good suggestion. I can still do that.

@rsandi9646 2 жыл бұрын

Also....on our place in Fredericksburg, we had four 2500 gallon tanks. We had since sold and moved. During the snowpocalypse last winter, the people that bought our place said the outlets were frozen. They could not get any water. You need to insulate your outlet.

@CountryLivingExperience 2 жыл бұрын

Yep, that's in the plan. Thank you.

@orijimi 2 жыл бұрын

If you wanted to spare yourself the erosion, you probably could have siphoned the tank and hosed down stuff more uniformly. Also, it works with even very large water heaters to put the tank's contents into a vacuum, pull the drain valve and stuff a nipple with a valve (open at first, closed afterward) on it while it's slowly draining. The same approach may have been possible here, but I am no physicist. But I fully understand the appeal of giving into the most dramatic solution. I tend to take them every time they present themselves. For what it's worth,even with plastic on plastic threads, pro-grade PTFE tape (Ferguson, Hercules, Blue Monster) is the secret sauce. All the same, I hope that your seal holds up the way you've done it. And it may be a no-brainer, but make sure to have a valve on the pump side as well. ;)

@CountryLivingExperience 2 жыл бұрын

Thank you. I don't think a vacuum would work as there are too many air leaks and that 2500gal of water is super heavy. I left the new valve open through this current rain storm because I still do not have the parts for the valve on the pump side. Shortages at the stores here.

@loubzac3 2 жыл бұрын

Glad it happened now and not when you are dependent on it

@CountryLivingExperience 2 жыл бұрын

Absolutely!

@carolewarner101 Жыл бұрын

Oops!

@dysfunctional_vet 2 жыл бұрын

plastic compresses heavily on the weight of water so removal of that plug under pressure would be a bear. it might be possible to place a wooden box shaped the the wall on the inside with a soft rubber gasket, and pump the water out by vacuum thus creating an ambient pressure inside at the plug to the outside pressure which might allow you to remove the plug, plumb the fitting and then reflood the void (cofferdam) and you would not lose the water. a bit of work, but if rain is not frequent, that would would pay off. hope this helps

@CountryLivingExperience 2 жыл бұрын

Cool. Thank you.

@relacionsustentable2319 2 жыл бұрын

dang just forgetting something so small can create such a huge problem,, homesteading is not easy. your dog created a chicken Mote,,LOL

@CountryLivingExperience 2 жыл бұрын

It sure can. Yes, I will not use the dog to dig moats around my buildings on the homestead.

@DavidD03820 2 жыл бұрын

You didn't need to let all that water out in that short of time. Just make a siphon out of PVC pipe and send the water out of a garden hose to water your lawn, then send the rest out the back of your property. You don't even to even glue the PVC fittings together, you can reuse everything afterwards when its all done.

@CountryLivingExperience 2 жыл бұрын

All done now. It ended up watering a few fruit trees downstream.

@southcountyhomestead 2 жыл бұрын

Ooops. Thank you for sharing the good and the...well...not so good.

@CountryLivingExperience 2 жыл бұрын

You're welcome. Gotta show it all.

@rw-xf4cb 2 жыл бұрын

Put the valve (gate valve ete) as the first fitting on your tank having it on some end of pipe can result in loss of water if that pipe is damaged - I would use metal (brass gate valve) valves for extra resilience as plastic ones are more likely to fail over time especially in sunlight the tap mechanisms become brittle and then you have difficulties turning on/off when needed. Brass gate valve with screw top also doesnt stick out as much and less likely to get damaged should animals, people or machinery bump it!

@CountryLivingExperience 2 жыл бұрын

A brass valve is a good idea.

@MH-Tesla 2 жыл бұрын

None of your viewers gave you any crap about that old hat? Lol. They are hard to replace when you find one you love!

@CountryLivingExperience 2 жыл бұрын

Lol. Not yet.

@pobo6113 2 жыл бұрын

When I set up my homestead I relied on a family member that said he knew what he was doing. I since learned that I did not put on a ball valve on my 1550 gal. water tank. Because that water is my only water I have not fixed the issue. I need to get a second tank, transfer the water then fix my connection. We live we learn. It that I don’t know what I don’t know so I have to learn as I go.

@CountryLivingExperience 2 жыл бұрын

Learning is about failing first sometimes. Those are commonly best lessons.

@ironleatherwood1357 2 жыл бұрын

When we lived off grid in middle Tennessee for 3 years I made to many mistakes. My biggest one probably was wasting a ton of money on digging a well. Sulfur water big time but mainly collecting rain water is the best option in Tennessee. Tennessee gets the 6th most rain water in America. We now live back on grid, live and learn.

@CountryLivingExperience 2 жыл бұрын

I understand. Luckily I have a few different sources at this time. Glad I learned early.

@GrowingUpGoudie 2 жыл бұрын

Don't waste your money on bulkheads. Use a uniseal and save a bunch

@CountryLivingExperience 2 жыл бұрын

Not sure what that is. I’ll check them out.

@kfrazman1 2 жыл бұрын

I have been looking for a resource to show what parts I need (ball valve, bulkhead, pipe, etc). I have a 2500 gallon Norwesco. I want to set up for rain catchment and eventually connect a pump. Any resources to share with more details? This is so new to us. Godspeed.

@CountryLivingExperience 2 жыл бұрын

Yes, we just did a video on that. Here it is: kzfaq.info/get/bejne/Zq-YnsulzcvMdH0.html

@rperry1410 2 жыл бұрын

Don't waste all the water you have saved install your new tank with the proper fittings and then pump the water into your new tank and fix your old tank and connect them together

@CountryLivingExperience 2 жыл бұрын

Too late. No big deal.

@benjones8977 2 жыл бұрын

I failed my whole way to success in going off grid! 🤣

@CountryLivingExperience 2 жыл бұрын

I totally understand. Failure is the best way to learn sometimes.

@benjones8977 2 жыл бұрын

@@CountryLivingExperience It’s probably why it was a good thing I started at 24 V, otherwise I would’ve killed myself by electrocution! 😂 I don’t know how many times I got shocked, as I was new to electricity. I learned to make sure you insulate your ground wires, the hard way!

@mikerichards6311 2 жыл бұрын

👍

@zuzax1656 2 жыл бұрын

I am new to your channel and like what I've seen so far. Just so you know, I had plans to build a system like this for my own place, but never got the chance (fire). I do have a question, though. Have you thought of putting in a "T" fitting between the tanks for the supply line to the pump? With a valve on each side of the T, you could use water from either, or both, tanks, and be able to isolate either tank or pump, for upgrades, repairs, or replacement, without cutting off the supply to the house. It may sound paranoid, but I tend to plan for worst case scenarios, such as contamination of the second tank's water. As I understand, it gets pumped to the house through the first tank. That would contaminate both tanks. Just a neurotic thought.

@CountryLivingExperience 2 жыл бұрын

Thank you. Glad to have you here. I did think about the t-fitting between but the reason I did it this way was because of where I want to locate the pump. I wanted the pump underneath the shop portion of my barn and a shorter run to electrical which is already there. Otherwise I would have done it similar to as you suggested.

@tommcgivern4800 2 жыл бұрын

@@CountryLivingExperience You obviously do what you feel is best, but I'd think fewer bulkheads in that tank would be best. (how are you going to get the new bulkhead on the inside of the tank (to make the seal), it'd have to be bigger than the diameter of the hole you'd have to cut to put it in, so it'd seal. If you T off the pipe that spans tanks, you could run PVC around the tank to the pump under the barn, this poses its own problems, (exposed PVC to be stepped on/broken) but that would think traffic would be minimal in that area).. Anyway.. best wishes however it goes.. really appreciate your videos.

@CountryLivingExperience 2 жыл бұрын

@@tommcgivern4800 Thanks Tom. Good thoughts. Fewer bulkheads would be better.

@zuzax1656 2 жыл бұрын

@@CountryLivingExperience I understand wanting the pump protected, but that doesn't preclude the T fitting. The water going to the pump from the tanks is gravity fed. Remember the pressure when you removed the cap? That's the kind of pressure you will have going INTO the pump. If anything, you may need a valve just to control that pressure. The only downside might be the vulnerability of a pipe from the T to the pump, but it could be either buried or encased in a removable tile/pipe (concrete half pipe).

@marilee324 2 жыл бұрын

@@CountryLivingExperience I was thinking the same thing...also, if you turn the tank 90 degrees and pipe a spring check, then isolation valve then tee and manifold the tanks together your pump supply would be closer to your barn and you will prevent backlog between future tank(s).

@adamfields45 2 жыл бұрын

You should never join talks with Hard PVC tanks will shift and this will snap, then you lose both tanks of water and probably stuff the tank flange

@CountryLivingExperience 2 жыл бұрын

Interesting. Thanks for the heads up.

@gardeningperth 2 жыл бұрын

Won't the water level between the 2 tanks? So none of them will be empty providing there's actually water to distribute between the tanks.

@CountryLivingExperience 2 жыл бұрын

That is correct.

@workinprogress3609 2 жыл бұрын

A chicken moat!🐓🐓🐓

@CountryLivingExperience 2 жыл бұрын

Lol. Yep.

@oliveacres7743 2 жыл бұрын

Just curious, why didn’t you try and screw on the valve with it open then close it after it was tight? Just asking.

@CountryLivingExperience 2 жыл бұрын

The force of that water was way too high.

@Jinjerbread317 2 жыл бұрын

Why couldn’t you use up the water that was in the tank and then insert the valve?

@CountryLivingExperience 2 жыл бұрын

There was no way for me to contain the water once I took the plug out of the bulkhead.