After watching the goonsquad butcher the track hawk this is refreshing to see

Ben, you run a real body shop. You do what ever is necessary earn a honest living. My hats off to you young man. BTW you put out a darn good vid also.

That dent fix tool is amazing. I want one even though I don't do bodywork.

That body work is amazing

Everything is stellar Ben! That work on the rocker is nothing short of perfection. I certainly don’t want to minimize the seam sealing with caulking at home. It’s tough I’m sure. Maybe the fellas from SEMS can come back and share some tips. Personally I think you did a superb job. I can’t wait to see the next video when it drops. I hope you had a great weekend with family and friends.

Ye I'm addicted to the vtuned channel man definitely need rehab after all these years of watching the man who definitely can do just about anything to these vehicles he buys wrecked from auctions man Ben your the man I always new this from when I first started watching you bro I'm subscribed to many channels bro but this one i'l never miss out on watching that's for sure bro! 👌👌👍👍👍💯🏴󠁧󠁢󠁷󠁬󠁳󠁿

Dear Ben, Your 2024 Ford Mustang GT will look absolutely brand spanking new after the paint job is done and I guess your brother Paul will do this job. I can’t wait to see the next episode of this project so I look forward to that and send you love from the Netherlands

Watching you work that door jamb - you are a master of your craft Ben. I hate to be watched but you nail it each and every time.

Good quality repair.

Nice job on this car! I really like your attention to detail and not cutting corners!

Top job Ben. Thank you

Great job Ben. Can’t wait to see it completed. 👍🏾

Every Sunday I wake up early take my chimarrão and watch vtunned videos!

Just wanted to say thanks for putting out your videos! Just watching you restore all these cars has given me confidence to get back under the hood of my car.

For someone who hates body work, you do amazing work, keep up the great videos. It's impressive how you work.

I have loved watching this series on the Mustang, thanks!

Excellent job and very fast advance for the whole project. I looking forward to see the project finished.

That little frame machine does good with your talent with body work

Respect all the effort you go through to do it right. You're a top shelf body man 😊

Just keep working hard and keep growing it will pay off trust and Believe love watching you man

Great job on the mustang, you are one of few KZfaqrs who don’t hack their cars to death

Awesome and outstanding as always.Thanks for sharing and taking us along.

Quality repair work as always!

Awesome job !

The mustang is coming together nicely 👌

Great job on that repair Ben! Even though most of it will be covered, it shows you take pride in your work.

Amazing job on the repair 👍👍👏👏

Welcome back on the channel 😊

Great video😃👍

That was excellent and interesting work you did on the door frame of this car. On a side note, one of the best and cheapest adhesive removers is plain old dollar store charcoal lighter fluid.

Great video Ben ♥️

tnx for the video

Nice progress on the car, surely you’ll be seam sealing with no issues soon enough. Your family members can help with tips you need. Looking forward to the before and after pictures coming soon.

Nice work, as always!

Love watching an artist at his craft.

Excellent job Ben enjoy your channel

Gday mate

Exciting 🔥

good job bud

great stuff thanks

Ben outstanding progress on the Mustang! I am excited to see the next episode! I am sure it will look amazing!

Well done your work ethic is amazing 🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦

nice work

Nice work as usual Ben.

Great Job

If you decide to paint the roof black, then i suggest go ahead and also paint the mirror caps black.

nice job again man, thanks for sharing.

Welcome back vtune keep on making more video

looking sweet

Nice job

LET'S GO VTUNED

That Mustang will be nice! Thanks Ben

King of bodywork ❤👑💯

15:17 I worked in a restoration shop back in the 70's and they had a setup where you put a big cup over the piece to be blasted, with a hole for the nozzle and the cup sucked the beads back in and recycled it.

job done .well done benny boy 👏👏🙏🙏

That turned out beautiful. Just like nothing had happened. Job well done.

My favorite KZfaqr ever.thnx for video

Lol the hood box is bigger than Ben 😂😂

looking good.

I see you with the paint brush fam 🎉

Today's paint is very thin and typically electrostatic applied and or robot applied. Ford uses water based and has a cool water based recovery system to collect the overspray. I miss lacquer, shoot it wait a year till it dries sand it buff it lol. Nice job! Shop is looking good.

Hey Ben!!

Love your content it cheers me up you deserve more subscribers dude

He's the best in what he does

You should use ETA WHeelstands with your frame puller.

Not sure which was more satisfying to watch... the Mustang (which is turning out amazing) or watching that fork lift get sand blasted

When blasting dry it has a lot to do with the humidity also for flash rust.

It'd be interesting to see how thick paint would be after proper repair, vTuned maybe you could show us some measurements with paint meter after the repair?

great!

Vvvvv vvvv tuned🎉🎉

Lookin good Ben jammin !!!

That dude has the best job in town

Glad to see you didn't edit out all your attempts at the sealer. Real life

Good job bud you need a lot of patience to do body work you seem to have lots of

Good work ben 👍👍🇦🇺 Paint the whole car it will look so much better than doing bits Like goonies did with the Porsche and it looked like a patchwork quilt

Hey vTuned little tip. Seam seler shuold be worm, let it worm up in hot bucket of hot water :)

If your welds are good and grinds down smooth you don't need any kinda filler just primer it and paint it

There is a special tip just for seams on edges.

Loving the channel though, your skill set seems second to none 👍

Great job! please don't use presol over bare body filler. it's porous and will absorb the solvent, only to bleed out later. Speaking from bad experience!

Thank you for wearing the PPE. Health is wealth

Was going to make something to eat again today and vtuned drops a video man my Sunday just keeps getting better man osome Ben just what I wanted bro I'm at the start man will comment bit at the end of the video now man love these vtuned videos guys so interesting he the man that banging metal back in to shape and putting cars that shouldn't see the roads again back on them his work is freeking osome guys what skill he got man I'm sure this Mustang gona look osome when he done with it I'd like that massive aggressive look from the front and back on it but if it's a car he fixing and selling I don't see the point unless there is a market for the aggressive look Mustang rear defuser and front and sides then spacers on four wheels it would look and sit with that look then aaarrrrrr the killer look lol 🤣 always a killer video with vtuned guys like if you a o,g fan! 👌 👌 👍👍 💯 🏴󠁧󠁢󠁷󠁬󠁳󠁿

💡👍Brilliant !!

What welding sanding machine do you use

so how do you like the floor tile now that you have done some work on it

The reason you don't get factory parts seam sealed is because the body panels are produced out of the body shop and racked up for shipping in that department. Seam sealing is done in the paint department after e dipping the bodies.

Look where you are, your own work garage. I think sponsors are lining up to work with you. With your qualities you will go far, mark my words. Good luck and I look forward to your next videos, your build is going great.🚗

Ben for those pesky labels try a heat gun. If the glue of the label is water base, then soak them with water and peel.

It is never how much a tool cost but how well you use it to get the job done.

Just curious, why didn’t you cut out the whole thing from the a to the B pillar cut out the whole rocker arm and then just weld up new stuff I also noticed that you put a lot of filler in the door jam, which gets a huge amount of high use you worried about the filler cracking and that goes back to my question. Wouldn’t it be better to replace the whole rocker arm?

You can use masking tape to make a perfect seam sealer bead

Hello from Kharkiv Ukraine, Great video, all the best, Mercury

You make your work look so easy Ben you just fly through it bro your talented man it goes to show Ben with all your subscribers you have the channel just keeps growing and growing, excellent work Ben keep it up man because I'm looking falward for this finish so I can see what your next vehicle is going to be I hope it's an epic one Ben just so we have a very good car to watch getting the vtuned special as we approaching the very start of the summer weather man great video Ben like always bro big shout out man osome video once again, piece out man and see you on your next one fir sure you can count on that man!. 🔥 🔥 👌 👌 👍 👍 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿 💯...

Hey vtuned ain't watched in abit good too see you

I can't believe that guy did the abrasive blasting in an open face mask. 🥺

what's the brand name of the spot welder/dent puller used on your mustang door jam can you post a link to the manufacturer

What’s your safety restore discount code ? Thanks

When are you headed down the street to fix Goonz Mercedes?

Why seam seal an aluminium bonnet (sorry hood). They don’t rust just mildly corrode and seal themselves. I don’t get it?

I am interested in a mustang!! How much would the price be?? I'm from Czech Republic...❤😊