I Fixed 6 Oil Leaks On My Mercedes-Benz For $150 And So Can You! Sorted EP.2

Рет қаралды 350,910

6 жыл бұрын

In today's episode of Sorted, I will be fixing six oil leaks on my 2005 Mercedes C55 AMG. These jobs apply to about a dozen different models spanning about a decade. Basically, if you have an M112 or M113 engine from about 1997 to about 2008 most of these repairs apply. We will tackle valve cover gaskets, breather chambers, oil cooler seals, the oil filter housing seal, a pressure port seal and I go over the dipstick grommet seal.
I'm super excited to announce a totally free way that anyone can support the channel!! I was approved for an Amazon Influencer account which allows KZfaqrs like myself, and other creators to earn a small commission from sales generated from people first clicking on my Amazon link, and then buying anything from Amazon. This doesn't cost you a penny as Amazon compensates the creators for driving traffic and sales to the site. So even if you don't buy the product or tool that I link in the video description box, you are still supporting the channel by shopping on Amazon after you clicked through any of my links. Each video will have either specific links to things I use or talk about in the video, or you will see my general LegitStreetCars Amazon link like this. www.amazon.com/shop/legitstre...
Next time you need car parts, tools, diapers, condoms, fidget spinners or anything on Amazon think of good ole Alex from LegitStreetCars.
Check out FCP Euro for all your Euro parts needs and don't forget they offer a lifetime warranty on everything they sell. I know, they're crazy!!
www.fcpeuro.com/
Get yourself a cool Black Widow Parts Washer:
bit.ly/2rJ3wmo
The entire Black Widow Lineup - bit.ly/2rMT7WV
Alex's Amazon Recommended list
www.amazon.com/shop/legitstre...
I used oil eaters for a cleaning solution and so far so good. Only $40 for a 5-gallon drum on Amazon. You only need about 4 gallons as this is a 4:1 water to cleaner ratio and it's a 20-gallon parts washer. Takes 5 minutes to build.
goo.gl/MCbT1G
Here are the tools you need for these repairs. Links are just to give you an idea, I have many different brand tools in my arsenal but don't be afraid to use Amazon for tools. I do all the time, like for that massive 46mm Socket.
3/8 Ratchet- goo.gl/GTjz4h
Extensions- goo.gl/s6AtXh
1/2 Drive Ratchet needed for Oil Filter housing nut- goo.gl/t6nuo5
46MM 12 Point Socket- goo.gl/bfi4JW
3/4 to 1/2 Inch Reducer for 46mm Socket for Oil filter housing nut- goo.gl/Qyrrk9
Cheap Screw Driver to turn into breather chamber scrapper- goo.gl/gesZ4H
Inverted Torx Set. You need an E30 but the set is good to have for any Mercedes- goo.gl/tEY1mt
Torx Sockets set for coil pack bolts and breather chamber screws- goo.gl/gsdp84
Oil Dipstick- goo.gl/vP7A3q
Some Torque Specs for ya.
Valve Cover Bolts- 10NM
Breather chamber Screws- 4NM
46mm Nut for oil cooler- 70NM
4 Oil Cooler Bolts- Around 10 NM, couldn't find the exact spec.
2 Bolts for Pressure Port- Around 10 NM, couldn't find the exact spec.

Пікірлер: 637

@LegitStreetCars 6 жыл бұрын

Who daily drives their AMG? Actually who daily drives any Mercedes? List model and miles. Even though my daily is a Chevy Volt I've driven this car about 1000 miles in three weeks because it's just too damn fun.

@djjesus.hediedforyourspins3154 6 жыл бұрын

2003 E320 CDI w211. 186k miles. Daily driven.

@pozi240 6 жыл бұрын

Yep... W204 C63... and winter drive it as well (thanks to your vids, I've tackled lots of jobs I wouldn't normally try). I love your vids Alex. I don't what is, but you have about the most "soothing" and calm voice and demeanor of any auto vlogger on KZfaq. I love just having your videos playing in the background while working in my garage. It keeps me calm and reminds me I have to get onto my car maintenance!

@LegitStreetCars 6 жыл бұрын

One of the best diesel engines Mercedes has made.

@MarcosSilva-kd3kz 6 жыл бұрын

2003 SL 500, 148k miles daily driven..

@maxshirk2711 6 жыл бұрын

Another great video Alex. My 2007 CLK 550 is just about to hit 101k, I love it more everyday. Comfortable enough around town, even on craggy LA roads. Wonderful on the highway, and lively enough for a regular canyon run. It would cost more than a car to get another parking space here... But why would I need another car?

@kaicremata 6 жыл бұрын

I didn't have a car or license for 5 years and haven't owned a decent car in 20 years. Last year, I started looking at C-class; under $15k, just looking on Carguru at the listings over and over...and then I saw a C55 locally. Mint condition, 97k miles and as I read the description and did some research I said to myself, "This car is special". I never even heard of it before. Got my license back in June 2017, bought my ride the next day. I have driven 35k miles in the last 13 months and OMG Becky, I love my car. 90% of that mileage has been on the highway, mostly at night and I can't tell you how pleasureable it is to really drive a car, at 95, 105 110 mph for extended periods of time. Most people don't DRIVE their cars, they just ride around in them; I GET TO DRIVE!!...i really appreciate this series of videos

@davidvorbeck3558 6 жыл бұрын

03 c240 150k Miles. First car and learned everything I know on it. Feel proud learning how to take apart/fix on a German car!

@boredhuman805 3 жыл бұрын

Can u message me I have one and it has some issues

@derrekjohnson2919 2 жыл бұрын

After watching your videos, I sold my E60 550i and went out and bought a nice low mileage 2007 CLS500. what a great car, Thanks for the great videos. No more Idrive issues ever again. lol

@dman6485 6 жыл бұрын

Great video as always, thanks for the information and understanding. Never realized how simple and possible these Mercedes were to work on yourself. Great channel.

@Silentservice642 2 жыл бұрын

I just did the Oil cooler and Oil filter housing on my R500. I followed exactly what you said to do. THANK YOU for the directions and all the torque specifications. You Dah Man! 👍🏼

@Bimmeraudi1 6 жыл бұрын

I absolutely love this channel. This guy is very clear and articulate. I am a BMW and Audi owner, however after finding this channel i'm very interested in owning a Mercedes Benz. This channel will grow, keep up the good work.

@ClassicGamingAgar 6 жыл бұрын

you should look for a 2008 E500 if affordable,NA V8 glory.

@JunkWorld-Junk-Removal 2 жыл бұрын

Hi - Whats the square thing he removed under the oil cooler housing called? I need that O-ring

@Cynsham 2 жыл бұрын

Oh, so you must be a masochist!

@jc9504 4 жыл бұрын

Alex - Thanks to the video, I just finished all of these fixes on my a209. I also did a water pump and thermostat. This puts me one step closer to daily driving my AMG.

@veightrwd8828 5 жыл бұрын

Thanks for listings torque specs and exact tools needed. You sir are a boss. I often do a lot of side work and I can’t take my whole tool box with me so I will often watch videos for repairs that I can’t quite remember so I know exactly what to take with me. Thanks again.

@noahthing4 6 жыл бұрын

Thank you very much for the video! I daily drive a w210 E55 AMG and love it everyday. I need to do all of these repairs and I obviously have the 5.4l m113 V8. I found the valve covers, it would be super helpful for the names of the rest of these parts ideally part numbers. Thanks Alex!

@realRichHunting 6 жыл бұрын

I bought my first Mercedes about 10 years ago. It was a little C Class and I fell in love. Since then I have owned 4 E Classes and in my opinion, Mercedes makes very reliable cars. If you can do maintenance yourself, it's cheaper to maintain than a Honda Civic.

@mcearl8073 5 жыл бұрын

Richard how do you figure that? I can see it being cheaper if you compare DIY on thtools Mercedes and take the Civic to a dealer for service but otherwise it’s definitely not cheaper. Mine takes like 8.5 qts of oil, a filter that’s 2x a Honda filter, 2x batteries that aren’t cheap. 2 spark plugs per cylinder and they are over 7 bucks a pop. That said, it’s not really a big deal, I’d much rather pay the extra and drive a Mercedes than save a little and drive s civic. I also realize a lot of people will be cheap and buy the cheapest plugs and oil and aftermarket parts to save some money but I’m not convinced yet that that is a great idea. I tried getting a cheap fuel pump and a lot of the parts didn’t fit right so I ended up having to do a lot of modifications on it and now I honestly don’t have a ton of confidence in it. I think in the future I’m going to try to stick with manufacturer recommended parts when I can, if there’s a significant difference in price then maybe I’ll risk it depending on what it is.

@jabulanirambwawasvika1683 4 жыл бұрын

I love to watch your educational videos on Mercedes Benz, I have owned W210 E200 and E430 and now ML320. From now on I will be doing the DIY, because I now have knowledge from your videos. You are very clear and great in your presentation easy to follow you step by step. Thank you my brother.

@juliofaena 2 жыл бұрын

2022, this video saved my life. Im doing oil filter housing gaskets this weekend, now I see this is a totally diy job. Thnx Alex

@Mr5Stars 6 жыл бұрын

Great video, i highly doubt most mechanics would be so meticulously and detail, you are awesome

@craigkeller 5 жыл бұрын

I really like your attitude and approach to doing the job right. Good for you young man!

@FixItRyan 6 жыл бұрын

I really appreciate the detail you went into changing the valve covers and oil filter housing! Please also show such detail on other stuff like the EGR and the MAF bc those are projects I personally have given up on in them in the past out of fear for breaking them.

@LegitStreetCars 6 жыл бұрын

Ryan N Watch the ultimate tune up video in a couple weeks

@asandaandrewmoss3505 4 жыл бұрын

I honestly love how consistent you are in all of your videos. Kudos man, keep up the great content👌🏾

@imanalshami3548 5 жыл бұрын

Genius..thanks a lot Wished if all mechanics having your passion and integrity

@TheDirtflyer 4 жыл бұрын

Very informative, now , I'm getting the courage to do this job on my 2000 Mercedes S500. Great Video

@NOXXism 6 жыл бұрын

Always a pleasure watching your videos man. Keep it up!

@Robsav-yx6vi 5 жыл бұрын

Alec , you make awesome informative videos . I watch The adds completely hoping you get more $$$ . Thank you For the editing and pace of your videos. Easy and Enjoyable to watch.

@LegitStreetCars 5 жыл бұрын

Thanks Rob, means a lot. Alex

@Aardvark49 5 жыл бұрын

I really like how you showed how to replace the oil filter housing seals. You took some of the fear away!

@leemail4946 4 жыл бұрын

1998 E320 W210, with 137K miles, daily driven. I bought it from the original owner seven years ago and love it. Keep up the good work, Alex, love your videos.

@seven73ify 5 жыл бұрын

HELL YEAH! Finally good filming, English, and explained! Please keep up the diy's thanks brotha! Go Bears

@keitht7546 6 жыл бұрын

Great info because oil leaks are a problem and a messy engine compartment and floor 👍🏽👍🏽

@curlymyhero 6 жыл бұрын

What a great guy! So friendly...

@lwwahlert 6 жыл бұрын

You need & deserve your own show on Velocity !!!

@omairtheman1 6 жыл бұрын

Alex, I do not own a M113 engine or a Mercedes for that matter but you make watching these videos fun and informative!

@RUGQBIFF 4 жыл бұрын

Nice job bro. Love the videos. The wife says I should do videos when I work on my Mercedes. No patience on my end. And you even post your mistakes so we out here don't do the same thing. You the man!!

@mcearl8073 5 жыл бұрын

That’s a very helpful video. I definitely need to do this on mine, I got a few oil leaks, I think most of them are from the valve covers. I just did the spark plugs today, they were probably long over due. I’ll probably wait till spring at this point as I no longer have a garage right now.

@chesar32 6 жыл бұрын

Thank you, Thank you!!! Great video!! This is what I needed...

@2ningmarket 6 жыл бұрын

Poor guy is “forced to drive the E55 to work” ;) great videos Alex

@420moej 4 жыл бұрын

1st world problems 😂😅

@idoalfasi2 6 жыл бұрын

You are stepping up your game! Great video!

@criticaljim1 5 жыл бұрын

Love your channel. Just discovered it. I'm still working on my w163 ML430 restoration project. Just completed Timing Chain and around 200 other items. Looking forward to follow your channel

@Menga213 3 жыл бұрын

Did you restore it?

@ivanrlynn 6 жыл бұрын

Sweet ride and thanks for the tips, They totally changed my mind on buying one for myself 😻 hell yea

@warryckscown5620 2 жыл бұрын

great having the hoist and the equipment,, one thing im particully interested in the torque applied the bolts, im working on an OM642 aluminium block. changing the seals at the oil filter, and where it attaches to the block.. concise vids are the best, good job mate

@jorgeirizarry5971 6 жыл бұрын

This is a legit channel. Love it more everyday.

@aaronirvin5921 5 жыл бұрын

I have a oil leak coming from the main on my CLS 550. About to get the work done great video and that black widow sink was 🔥

@theconfortibrothers2827 6 жыл бұрын

Very helpful video! When we took the 400k mile E55 in to have the valve cover gaskets replaced, the mechanic was completely shocked by how clean the inside of the engine was. He was so shocked that he had to double check and make sure it was the original engine lol.

@brannonbarakat457 6 жыл бұрын

The Conforti Brothers what exactly did you to maintenance wise to keep the wear so minimal? Did you ever drive it hard or race

@theconfortibrothers2827 6 жыл бұрын

Brannon Barakat the first owner put 401k on it. It was dealer maintained basically it’s whole life. Not sure how hard it was driven

@paulwharton1850 6 жыл бұрын

Looove the modified screwdriver trick ! Many thanks.

@cornekleingunnewiek5024 6 жыл бұрын

You deserve way more subs and views that you have right now. Keep it up man I love your videos 💪💪

@LegitStreetCars 6 жыл бұрын

Thanks so much!!

@arbokanglia 4 жыл бұрын

Pure Gold!!!! You just saved me literally $$$$ Thanks

@nicholaswoodward8191 2 жыл бұрын

Great channel thanks Alex I am on the look out for a c55 here in cape Town. Currently have a 560sel and a 123 series 200 my daily. Time for some AMG fun!!

@shookones2216 4 жыл бұрын

Hey man, just recently bought an 04 Mercedes E240 2.6L V6 M112 RWD Wagon and love these videos!!

@jochenheiden 6 жыл бұрын

First!! Great video Alex. I don’t drive a Benz but I sure like watching these videos about them.

@kittypigeonclueless5566 6 жыл бұрын

Thanks to this video and specifically only because of this video I decided to change the rubber gaskets on the oil filter housing on my CLS55 because they were leaking. Thanks to Alex it went magnificently. And then.....I discovered my oil lines leading to it were leaking....bad. LOL seems I can't win for losing. Anyway...Thank you so much Alex!!!!! I recommend you to anyone who will listen, and many who don't!

@LegitStreetCars 6 жыл бұрын

Thanks so much Bob. So glad you knocked out your own oil leaks and saved some cash in the process. Pretty fun and rewarding job if you ask me. Alex

@atomparish Жыл бұрын

Thanks for this video much needed right now!

@mketushongwe7607 Жыл бұрын

I love the way it is presented

@longhuynh5249 3 жыл бұрын

Great video, you saved me so much money. Love it !

@mairoist 6 жыл бұрын

Love you’re channel Alex keep up the good work you do 👍

@TheLegitAlbanian 6 жыл бұрын

Great video as always man

@theorganizedgarage1080 6 жыл бұрын

Great video - thanks for creating it!

@shifty2755 5 жыл бұрын

Nice to see people working on proper cars for a change.

@Diaaust12r Жыл бұрын

Thank you very much for the tutorial it helped me a lot on my c240 i had 4 times belt ripped because of the oil leak. Now it's done, but man, that 46mm bolt was a bit sketchy to put back on.

@tazqarni1521 5 жыл бұрын

I love your vids, very informative, i have had many mercs with issues and your vids have given me very good repair guidance. Now looking at q7 as I have a expanding family can't afford a gl. Lol wish you would do some vids on Audi's too.

@vr-cx6lq 6 жыл бұрын

thanks to you and your friends at fcpeuro was able to fix all the oil leaks on my ml320 myself and save a ton of cash keep the great videos coming

@williamdove4363 5 жыл бұрын

Hey Man i love what youre doing , keep it up

@BrandanVenne 6 жыл бұрын

I’m replacing the engine in my c32 right now and people think it’s so complicated. I find Mercedes to be extremely easy to work on!

@charlesbabin8983 Жыл бұрын

I have a massive oil leak and it looks like it is coming from the oil filer housing/oil cooler seals! Got the parts on order now to try to fix it. Thanks a bunch!

@fore4kicks 6 жыл бұрын

Would love to see a power steering video! Need some help finding the leak and replacing what's leaking :)

@AdamAus85 2 жыл бұрын

So glad the oil filter housing, etc. is same design as on the m112 in my w220 s320. My mum "broke down" tonight and I believe it's the massive amount of oil on the drive belt that is causing it to slip and not power the alternator. I believe the leak is one of these common ones.

@shemmo 6 жыл бұрын

I will apply little drop of sealant to the V corners on your valve (look 13:35 half moon shaped side). Oil usually leak from such places.

@reallyhappenings5597 5 жыл бұрын

Your channel is my first look at Mercedes... even with years of experience working on 2000s Volvos, they look complicated... they def do things differently.

@sufianjaar2642 6 жыл бұрын

Great video as usual My daily is a 1998 W202 with a M111.970 ( it originally came with a M111.942) and i swapped it, too bad where i live it’s very rare to find a 6 cylinder and not a single AMG in the whole country!

@serbancordis3416 6 жыл бұрын

you can also replace the MAF seals, the come cheap and there are three different versions, each one with increase number of grooves so it will seal better. And finally do a vacuum leakdown test. Just to make sure. And i would be using a wooden pry tool so i won't be risking damaging the covers. But then again i did this on the E not on the C class, so more room to work.

@spencerlim8517 5 жыл бұрын

About to change seals on my Nissan. You’re so lucky that they’re located up top like that. Illl have to be on my back and maneuver around the control arm and muffler plus I have to drain all the coolant.

@WookieMonster01 4 жыл бұрын

Thank you Alex for how to and torque specs I'll be around this to me c55 soon

@Mrcodewarrior77006 5 жыл бұрын

Life is so much easier with a lift.

@jasonhitch660 3 жыл бұрын

No way in hell am I trying this. Nothing works like you should. This dude makes these videos and thinks the every day Joe can do it. Get reallll!

@richardslaughter5534 2 жыл бұрын

The everyday Joe can do this I did all of these no lift no special tools and I'm not a certified mechanic

@racecarrr Жыл бұрын

Righty tighty my dude 👍

@mxwdle4685 Жыл бұрын

I just did it on my e55 lol

@ahill3736 10 ай бұрын

@@jasonhitch660he does make it look easy but most of these projects are doable. Take your time watch the video a million times. Get’em done.

@1995RangeRover 3 жыл бұрын

Great vid bro! Thanks for sharing!!

@ZoltanHercules 7 ай бұрын

I drove a c240 97 model. I put 100k in that car. Owned it twice too. Thanks to you and a previous vid where you flipped three mercs, I got involved in mechanics during lock down. My engine was the m112, the baby 6v - I had to buy two Haynes manuals as this was the first model, 2.8 litre model that had this engine. I bought all the hits in the U.K. - I had that car working so sweet. Did regular oil changes, changed all o2 sensors. All spark plugs. The oil cooler gaskets that had plasticised. Torqued all engine bolts as over time they had worked loose, even replaced the intake fan clutch. Sorted an ignition coil. Patched up some exhaust holes. Tightened up the exhaust struts and supports. Even changed the serpentine belt. I remember doing all this work on it and I drove for three miles to test it, went round a round about, heard all this screeching. I looked about - it was just me on the road. It was like driving a comfortable couch. One that could easily hit 110mph. I miss that car. It was so easy to work on.

@iheartgs400 4 жыл бұрын

Recently got this done on my W211 E550 the oil filter housing and oil cooler gasket you also somewhat give it a coolant flush and power steering fluid as well as you have to remove these as well.

@williamerwin2472 2 жыл бұрын

No you don’t have to remove either of those items you just mentioned

@alexhall6396 6 жыл бұрын

rip to one of my flathead screwdrivers.. Thanks for the quick tip!

@ersangul6757 6 жыл бұрын

I am in love with your C55 🙈 had a w203 too. Great car 👍🏼

@presidents1 6 жыл бұрын

Thanks for your videos, Alex. Would you please make a video, if possible, about timing chain replacement and give us some info how to check timing chains for ware, common issues and at what mileage they usually fail on Mercedeses?

@stevehoe 6 жыл бұрын

VW, Audi guy here but your starting to sway my decision to go for a Merc next time round keep up the awesome vids dude.

@rmil7691 5 ай бұрын

The very best DIY available anywhere

@samvjr07 4 жыл бұрын

Hi alex, thanks for all your help. I just got all the part for oil seals and breather hose. Question today my 06 s500 had a transmission problem I heard a big pop and all the oil came out lost shifting gear. Toll my car home. I jack up the and noticed a broken drive shaft. I check the oil on tranny and had oil. So I dont know what to do now

@ramibenrashid 6 жыл бұрын

One of the best channels. Keep it up Alex

@LegitStreetCars 6 жыл бұрын

Rami Thanks so much Rami. Really appreciate you watching

@noahthing4 6 жыл бұрын

1999 E55 AMG in astral silver. All original and I've put 13k miles on her in the last 7 months of the year+ I've owned her. Such an amazing car and I can't see myself letting it go. Will just have to make room for an E46 M3 :)

@jimschofield8734 5 жыл бұрын

Hi Alex, keep up the great work... I assumed modern Mercs were far too complex, expensive and so forth for just about any home repairs.... Even moreso for AMGs! Mercs had been automatically no-go cars for me for that exact reason - "if anything needs fixing, it'll need to go to a dealer and cost thousands"... Your videos and referrals to affordable parts are pretty incredible. It's not quite a mid-90s Toyota........... But it's all WAY easier and cheaper than I'd ever have thought; not really any special tools, and many parts available cheap.... It's obviously all easier than working on any Subaru ever made!!! All of your videos make me want to go buy a 15 year old AMG :D

@samadrid6321 5 жыл бұрын

I just found and really like your videos, great stuff.

@chesar32 6 жыл бұрын

I just like to THANK YOU!!!!! I just did this job in my C55 AMG... The next job will be the rear main seal gasket. Any tips on that...? Thanks

@seshachary5580 Жыл бұрын

very educative. Thank you regards

@alexanderthegreat6480 5 жыл бұрын

Oil housing is so simple to remove here!!! Compared to CLK models of the same year, for which you gotta remove thermostat, pulleys, belt just to reach the oil housing bolts. Such a pain. Much easier on your model!!!

@TheRebuilt1 4 жыл бұрын

great post, I have watched a lot of your uploads and love your garage setup. Just curious if you plan on adding a Twin Busch or Snapon tire changer and balancer.

@smithraymond09029 6 жыл бұрын

I don't even drive a Mercedes or anything German (On purpose) but I'm subscribed because I seem to take the same approach with my car (91 LS400, 350k ish miles). Fixing stuff right, in detail, the first time. Great stuff Alex, and go Cubs.

@mpmike1972 4 жыл бұрын

Great video I watched it last year and just watched it again. I have a w220 and I replaced all the gaskets and resealed the breather covers as well. I still have a leak and had it checked and I was told it could be the front crank seal. I wanted to k ke if that is something that can be done by me or do I need to have someone else replace it.

@1995dabeast 6 жыл бұрын

Hey Alex could you do a more detailed video on the ABC suspension? I'm interested in a 2003 sl55 amg. Great video BTW!

@alen_887 2 жыл бұрын

Thank you. This will help me a lot.

@anilsuthar8240 5 жыл бұрын

Another excellent video! Thank you!

@LegitStreetCars 5 жыл бұрын

Thanks Anil. Alex

@BGKariotis1 6 жыл бұрын

I daily drive my 2005 w211 E220 CDI with 837.000 miles!!! It runs very well after the engine replacement on 637.802 miles

@SteveRogers461 4 жыл бұрын

Excellent Excellent Excellent Video!!!

@johanesmuylargo 6 жыл бұрын

You're good, dude. Great videos.

@kalansadlier9631 3 жыл бұрын

So glad I fond your channel 🖖🏼

@elyascars 4 жыл бұрын

Thanks that was very helpful Just bought ML350 noticed a lot of leaks

@TheBeverlyhouse 5 жыл бұрын

Did I miss it? What sealent did you use? Thank you and keep up the good work, lots of help... Mason

@arbokanglia 3 жыл бұрын

Hi Alex, awesome video!! That for sure helps me to work on my ML320 2002. Unfortunately, I don’t think I solve mi issue complete. From time to time I had oil light on, and car was consuming oil. Yes it was a bit “sweating “from breather chamber and had that yellow colour under oil cup. So I replaced all the hoses and installed a new gasket. But the issue is still there, any idea why????? Thanks again Keep posting more videos!

@tedlu008 2 жыл бұрын

Great video! Wonder if you have a video on replacing Mercedes intake manifold? Thanks

@FixItRyan 6 жыл бұрын

Sweeeeeet satisfying video! Thanks for taking the time to finish your originally planned video before posting half of it (like some other KZfaqers)! How do you take the EGR valve off with no space??? I can't fit my hand in there on my CLK500 and when I tried to remove that tube portion it began to fold...

@LegitStreetCars 6 жыл бұрын

Ryan N Thanks! The egr is easy but I'll show it an upcoming video