I'm having a sale on the LegitStreetCars shop wipes! legitstreetcars.com/ Clean up your hands without having running water in your garage! After you mint out your hands/arms you can use the wipe to clean all your tools and work bench!

37:55 "It's running fine... That's weird." The BMW ownership experience 🤣

People say the worst sound is hearing a tool/bolt/nut drop, but they're wrong. The worst sound is the silence of it not hitting the floor.

Just an fyi: you dont have to remove the wedding band and brass fitting but from the new bag. You can just remove the old ones from the line. Then push the line into the new brass fitting with it still installed in the bag until it seats. Then snug the brass nut and your done! Super easy.

No need to disassemble the connection on the new airbag. Just push the line in and it seals. This is very well explained in BMW TIS. I did this job on my E61 two weeks ago and it's a 15 min job each side.

Imagine being the previous owner, missing your car that you were told was totaled for a cracked engine, only to see it again on KZfaq. The only thing cracked was the engine cover, and the check engine light was fixed by cleaning some parts and swapping out a coil pack.

I buy and Repair "Broken" auction cars all the time, creative "Fixes" are not uncommon and many times, ppl have NO idea how to Diagnose cars.....so if the auction notes say "Broken Engine".....sometimes, just a battery is needed.....sleepers are everywhere if you know what you are looking for.........You can drive any car you want, if you know how to work on and fix them.....Great Videos......LOVE the Content !!!!!

For the longest time, I never clicked on any of your videos. I don't know if it was the channel name or what, but I just assumed it was like "douchey" car content that you see a lot of nowadays. I feel bad even saying that, because I absolutely love your channel! My favorite part is just that you show your full diagnosis process, the little wins (like finding dropped bolts) as well as when things don't work out. The other thing I love is that you're not always focused on "out of reach" cars which has become commonplace on the internet today. Just a great channel, and again I apologize for whatever weird assumptions I had made before I even watched a single one of your videos. Keep being great! Love the intro, btw. Cheers from CT

You should probably do a complete coil and plug replacement on this car. If one went bad then all the others probably aren’t far behind, particularly for its age.

The full throttle worry in the AMG and BMW is definitely a thing. Premium is $3.64 in SC. Never liked the X6 look, but incredible deal either way.

I worked at a BMW specialist shop for awhile, and absolutely hated working on the N63, and S63 engine while in the car. No room for anything. However, whenever they're running good, they're really fun. I did downpipes, a straight pipe exhaust, and a tune on a fresh motor, and that thing sounded insane on the dyno.

I had two 2013 BMW X6's in the last few years. Some of the greatest cars I've ever owned. Never had any big issues and they ran amazing. One was even a Individual X6 Performance Edition. Wish I didn't sell it.

For the 20th time this video, the wedding band is called a Ferrule! 😁 Mike in San Diego. 🥰🎸🚀🖖

Alex, as always, you do not disappoint! On a side note, I live in Germany and know the troubles with this particular power plant. However, it’s one of my father in law’s favorite BMW, colour, spec… When you’re done with your magic, I’m sure you will sell it on. If we could work something out including shipping here, I would love to surprise my father in law for his 74th birthday in August with this X6. I’ve been looking for a long time and cannot find one here, as clean as yours for less than 20,000 €. His current daily driver is a 2009 Audi Q7 TDI. He likes it well enough, but my wife and I drive it more often than he does. Just let me know if it’s OK when you decide to sell it and maybe we can work something out.

27:49 Pro tip....when I did my N63 exhaust vanos solenoids, that hidden bolt was a huge pain. I cut a slot in the intercooler mount bracket arm, so that no I can pre-install the bolt without fear of dropping it, and it helps mount and situate the intercooler on reinstallation.

I purchased my X6 in 2014 brand new. I'm still driving my car without issues. Just follow recommendations and service as factory recommended. Nothing will be surprising to you, if you understand German Engineering. I Love my X6, the best SAV ever!

Correct Alex, the X6 did come in 5 seaters but it's optional. I agree with you, if you're going to have a big 4X4, it should have 5 seats, even if you decide to have only 2 people sit in the back!

Now sell it. Immediately. 😂😂

I love the intro graphic and sound, thank you for being original Max!!

I am addicted, to this channel. Have to get my fix every saturday evening.

As an AMG/American car enthusiast, touché on realising that although your X6 is an M sport, it isn't an M and you said you would remove the M sticker. Respect, from an M5 F10 owner 👏

I am a truck driver and a diesel mechanic. Since today's truck have air suspensions, I have dealt with a lot of air lines. While the video does call them a ferrule, they are also commonly referred to as barrels too. While most of the vinyl airlines I have worked on do not commonly have a split in the barrel, if you look at an American version, the crush ferrule does look like a barrel. The vinyl airlines we work on usually have a small pipe that goes into the airline, so the barrel has something to crush the vinyl line to. The whole fitting itself is called a compression fitting.

A little trick for recounting the intercoolers... I grind a slot in the bottom mounting hole so I can thread in the bottom bolt and then install the cooler. Makes alignment easy

I love watching your systematic approach working on cars! It's even helped me in other areas. Keep it up, man!

I like the x6, I have a 550i with the same engine, gives me a head ache every now and then but when it runs good it's a blast.

I vote you give the X6 to Max. He deserves a cherry ride, for all the hard work he does in the edits

...it's 106 miles to Chicago, we have full tank of gas, half a pack of cigarettes, it's dark, and we're we're wearing sunglasses...hit it!

28:18 The butyl tip is why I watch all your videos even if I’m not really interested in the car (like this one). Your channel is the only one I watch purely to see you disassemble / reassemble.

I like the BMW call, a good image of the actual society, nobody wants to answer anymore 😂

As a BMW’s fan I really actually like the X6, especially the V8, it’s like an X5 for those that don’t really need the trunk space. A cool looking pavement prowler with bags of presence.

I hate when you know a bolt is going to fall in the Bremunda Triangle 😂😂

I have a 2010 X6M, with 167,000 original miles. Stay on top of maintenance and this beast will do 200k+. I got negligent and my AWD transfer case evaporated all its fluid and destroyed the clutch packs. I spent 2 days muscling in a low mileage boneyard TCase and now it’s tits, after $1000 spent. Great content, Alex and Max!

I'm loving the new intro, and I'm loving the new song. Keep up the great work, alex, you're the man

I just bought my daughter who's turning 16 in a few months a 2017 fiat 500. It was diagnosed no compression at a garage, but I'm also a mechanic and it has a multi air 4 cylinder in it. I know the car sat awhile so I gambled on it. I got it to my shop and sure enough it just needed the brick that controls the valves purged. I got good oil pressure to the brick and it fired right up. Lol I do alot of this stuff too. Just never thought to make a show about it lol. Love your channel

I don’t know how often people say it, but your humor is hilarious to me. Keep being you because your videos are the only videos I actually wait to watch.

Alex - as always you not only fix the car as you always do, but you showed everyone how to do a repair by yourself and save $200 per hour for labor. I have an Audi A7 which I love (I know when they break it’s expensive and it sucks), but the BMW looks good and would be a great trip car for 4 people. Unfortunately I am not a BM’er fan because they break all the time!

I MISS MY BIMMER! I had a 2016 550xi, bought in 2019, was totaled out last April when I was rear ended by a 17 year old on the freeway. Watching this makes me miss that car SO MUCH! If this car was to cup up at auction I would SINCERELY have to consider bidding on it. Not sure if it's in my budget, but the N63 (in my case tu) era BMWs with the last of the V8s are still some of the cleanest looking of the recent BMWs!

legitstreetcars, quite simply, the best, most likeable guy on utube.period.

I dig the “80’s” logo! But I kinda miss the original one too. Another excellent and educational video, Alex!

I enjoyed this video! Great job! I love that you are a trouble shooter not a parts changer… Yes we have to change parts but you search for causation and also recognize engineering failures and explain solutions! I don’t mind the shape of the X6 I see it far more as a comfortable performance tourer than an SUV

Love the 80’ vibe intro. One of my favorite channels

I loved it when you said the car was totaled at "only 113,000 miles". In the 60's and the 70's, If you got over 75,000 on a car you were doing good. They never went that far.

The best and most legendary KZfaqR EVER!!! LETS GOOOOOOOOOOOOOOOOOOOO!!! BEEN WAITING FOR THIS!!! YOU POSTED EARLY!!!

Alex you are a true automotive genius!!!! My 2001 VW Passat had the pass through in the rear seat for skis, but no bag.

New air bags and dampers usually come with a white plug in the air line fitting. Once you get the old ferrule and fitting off the air line. Remove the white plug and push the air line in. then tug on it to make sure it’s locked in. No need to remove the fitting and put the ferrule on the line.

Nice work Alex! I'm honestly not that big on the looks myself, It sacrifices cargo space for styling that is questionable... Still, for what you've got into it, it's a pretty cool vehicle.

Alex, for me as a German it's really very funny to hear you speak German: „Intacoola“ 😂

Love bringing cars back to life. Enjoyed that alex. Thanks buddy.

Super late to this, but I want to say to Max, that the editing you have been doing lately has been fantastic! I especially enjoy the intros with the different designs/music. Nice work!

I'm only a minute and 28 seconds in to the video but I have to stop and say absolutely love the 80s style legit street cars intro thing 👏👍

You are the best presenter on KZfaq car repair videos, and I'm an Anglo so naturally very picky concerning US presentations, keep it up Alex.

Well done 👍 I love your work you and Streten should definitely work together.When these were new I wasn’t a fan looks wise but now that suv coupe cross over has grown on me.

Great job alex!!!!! And maxx fantastic with the editing stepping that game up

The disposable muffin tin and Sharpie method is a Godsend when working with tons of different fasteners. Also always video if you can. Makes it so easy to go back and see exactly how things were before touched. It's too easy to forget things for long jobs, especially ones that go multiple days.

The wedding band is a ferrule.

I worked as a GM tech in the midwest in the 90s, we called that stuff dum dum too. Great channel love the builds!

Here in northern NSW Australia, petrol for my 4litre V8 "91 Lexus is currently A$1.87 per litre, which is A$7.08 per gallon, (US gallon) which is approx. US$4.76 per gallon, so we're only slightly better off for gas than you guys! Love your videos Alex...keep up the great work, mate!

Gas is around $3.79 for 93 here in Miami, FL. I believe you can get the rear bench seat to sit 3, maybe swap it from an X5, they’re the same.

Max, I like the new intros. This one had an 80's vibe. You could do themes for the car types. 80's, 90's etc. Or maybe countries of origin, European, Asia, Merica... Great video guys as always.

The trick on the intercooler bolt is to cut a V notch on the intercooler tab the bolt goes through then you can pre thread the bolt on the engine and slide the intercoolers tab over it and tighten it down.

Awesome video as always! Having myself fell for the appeal of how cheap many once very expensive, safe, and luxury laden German vehicles there are, and knowing this is magnified by the very real fear of complex and expensive, if not nearly impossible repair, often regardless of overall condition I have participated myself. Love the gamble paying off....(so far:) As far as looks, that X6 has grown on me as well since it came out. Yet by far my favorite BMW SUV is the 2002-2003 X5 4.6is. A form and function factory M vehicle with a N/A V8, the right modifications, cool clean look, and huge for the time staggered 5 spoke wheels and tires....worthy of a spot imo...

I find myself cheering for Alex easily finding and fixing things like the bad coil issue on this complicated "Ultimate Driving Machine". As Always, May God Bless you and yours! 😇

Before you remove the M badge you should check the VIN to see if it as an M sport pkg. BMW has been making M-Sports since the early 90's.

I like the look! The red is an amazing color and it sounds awesome! Can't wait to see if you sell it!

alex i appreciate how you say "do it yourself".... I've tried several diy jobs on my cars that i was apprehensive about but totally capable. grazie!

The highlight of my Saturday mornings! I'm ready to see more GTR episodes though, and the seldom Wednesday videos are the best surprises of the week. Keep up the great work Alex!

the wedding band seal is called an olive.

X6 is a good looking vehicle. It's kinda set up well for older folks. Easy entry and exit, not needing lots of seating, but the seating position being high

Another trick to hold the bolt is just put a plastic bag or any thin wrap plastic between the socket and bolt and tear off excess, will hold it tight in the socket and you can move it any way you like

Any SUV of today reminds me of the 2000 Pontiac Aztek - Motor Trend magazine dubbed it the "Ugliest Car in the World". I first saw one at a car show with tent set-up...the sales person told me "in the future everyone will drive one of these...". He was right.

39:35 There are a few articles and videos regarding 5-seater conversions for the E71 X6 so you might want to start with that. I also thought, maybe you can just replace the whole 2nd row seats to that of an X5 which do not have the cubby holes in the center, after all they're basically twins (E70 X5 and E71 X6) so there should be some interchangeability across those two. I could be wrong but worth a try I guess.

Excited to see the detail. Great find!

Finished the Vid Alex! Congrats on The Bimmer and WELL Deserved!!!

The editing has always been good. Now it is Next Level, with all the AlexWiki and other additions! NICE!!! As Always, May God Bless you and yours! 😇

Had the same issue with my F10 N55 engine, just cleaned them up and they work like a charm,you can see instantly how engine becomes silent and smooth 😊

I have a 2 seater and a 4 seater. It just makes you choose who you REALLY want to go with you.

Love these moments that just need minimal replacement. Good find, Alex. 🤜🏻🤛🏼😊🇮🇹. Peasano!!

Will I make it a full tank of gas before it breaks again?

Always look forward to your new videos Alex. Keep them coming! 😎👍 Thanks!

Thank you for the great air bag suspension bonus content. Regarding the lack of backup camera, I thought my recently purchased 2007 X5 didn’t have one and lived with just the sensors until I found “camera” buried DEEP in the settings. Disclaimer- the camera is very temperamental and works when it wants to. Check it out to see if yours too has one. Bet it does because your interior and options look identical to my X5.

Love the X6. Great looking SUV/Car/Sedan??? LOL twin turbo V8 😍 nice interior too! Great video fixing it. Can’t wait to see the detail

Been refreshing the channel daily waiting for this!! So stoked!

My wife had a Honda Crosstour and we loved that car, and this car reminds me of it a bit, so I like it! My local gas prices are as follows: 34 minutes ago, at Walmart in Deer Park Tx. Regular $2.99 Midgrade $3.34 Premium $3.69

Vanos solenoids is one of the first go to items to check on a BMW running like that. And often just need to be cleaned. Glad to see you got such a good deal and relatively easy repair!

Cool Alex!! Another one for the books! That freaking coil almost gave you a heart attack😅 I know the feeling

The number of sockets in my toolbox with Butyl crammed inside is astonishing.

Funny, my mother in law has a 2012 Honda Accord (as so many others do).. and she had an engine light and a very rough idle with no power driving, her variable valve timing solenoid was clogged or, well reading bad.. she called Honda and they wanted her to bring it in, giver her a donor car, minimum $800 up to $1200 for the repair, PLUS anything else they found on the way, belt, oil change, plugs, you know the deal.. yeah.. I spent a half hour and got the belt off (not easy) pulled the VVT solenoid, cleaned it, tested it with an old tool battery, was like yeah it works, the screen was TOTALLY clogged though.. Car's been fine for like 3 years no problems since. Yay.

I have a 2013 X6 with the N63. It has 132k and has had the valve stem seals replaced along with a lot of the plastic tubes under the CCP/recall at 75k. Mine has a 5th passenger seat option along with the M sport package but not an a true M. It is quick and out runs a lot of so called sport cars. I would have the dealer scan your key to see what was done as far as repairs and recalls for peace of mind. I still get electrical gremlins now and then but the N63 is a beast and maintenance is key on these. As a side note we saw Nate B the same night, great show.

Nice work! In my last comment from the last video, I totally forgot about the VANOS solenoids.. Defiitely a good item to check, with a cam timing fault code on a BMW with VANOS! Obviously a much cheaper and easier fix than having to tear it down! You avoided the BIG ONE, sir. Always keep a spare vanos solenoid around, for sure! 😅 Definitely do those coil packs, soon, because they will all start to fail. I'd gap the plugs while you're at it, too. Seems like someone maybe changed the plugs and didn't know to gap them, so you may actually have new plugs in there... Also, as a preventative, I would replace the chain tensioners. It's a bit of work from inside the engine bay (not very expensive), and you may be able to absorb some chain stretch, over time, with new tensioners, reducing risk of the notorious chain slip failure. They are hydraulic tensioners and defineitly wear-out and fail over time (just like other German car engines with hydraulic tensioners).. You asked "did they make an X6 with 5 seats?", yes, it's called an X5 😅. But seriously, we love our 2012 X6 50ix. Even at 12 years old, she still gets compliments and is fun to throw into Manual Sport mode, launch it and make some noise, then, cruise up to an event in style. Also, it's pretty comfortable on road trips (I take it to the ski slopes, regularly), and actually doesn't do horrible on highway mileage, it's just premium gas and a 20 gallon tank (as you found out) that makes long trips a bit on the expensive side... All-in-all, I think it's up there on the list of older enthusiast luxury cars to consider for a $10k price tag. Just gotta be willing to do the regular maintenance (they need continuous maintenance) and know how to keep it on the cheap side of the spectrum (you don't need to only buy BMW branded parts, and sometimes a lightly used part from eBay will save the day and get you more than you bargined for)...

Why do I love watching Alex repair bmws so much. We miss the deloreon, put a twin turbo on it.

I do t like Trae types of crossovers, but the X6 I have always loved the look. Just think it looks slick and fast.

A few things from a master tech who flips euro and japanese cars: 1) hoses are different colors because if you look at the air compressor junction, thry all sit next to each other, the colors are labeled on the compressor so they never get mixed up. 2) you can tell its a coil if you cycle the key and the misfire temporarily stops. 3) bmws are amazing cars to make great profit on. They are actually pretty easy to fix and easy to buy cheap. Cheers

I’m so lucky in my 7 years of ownership my 750i never gave a major problem. I sold it and moved on to bigger and better things. That car was a tank 😊

Was just watching a amg wagon video then you upload and save my morning. Love Lsc videos.

One side of air suspension costs around 700-800€. Just to let you know. Also one air suspension costs 400€. Prices in Germany. Had to do it one time at the dealership because I had no garage at that time.

In Romania for the most expensive petrol we pay 98 USD for 14.7 US gallons. You are still doing much better than us price wise.

Yay alex😊, never let it be said that you shy away from a challenge , But thank goodness your not messing with that V12benz ,OMG that project had me pulling my hair out,all the way in NZ,lol awesome content 😊

Love the way it looks. Good stuff as always Alex!

Here's the first X6 video if you missed it! kzfaq.info/get/bejne/g9B9n9Oe09-apJ8.html

Love the editing and transitions I. The video dude 👍 editor putting in work :)