I MADE A GREAT HUNTING KNIFE OUT OF A BUNCH OF OLD WRENCHES

Рет қаралды 375,344

Жыл бұрын

My Other Knife Videos:
Incredible Custom-made Knife That I Made In 1 Day: • Incredible Custom-made...
Mega Sharp Dagger Made Of Damascus Steel: • Mega Sharp Dagger Made...
Created an Incredible Dagger with a Brass Handle from an Ordinary Piece of Metal: • Created an Incredible ...
Creating an Unrealistically Sharp Knife from a Piece of Metal and Bamboo: • Creating an Unrealisti...
I Made An Incredibly Sharp Knife Out Of An Ordinary Piece Of Metal: • I Made An Incredibly S...
#knife #sharp #metal

Пікірлер: 305

@user-zd2ho7cv4p Жыл бұрын

What had happened in the 5th minute? A miracle? A bunch of old wrenches, which looked like a chicken bone suddenly became a thick piece of steel!!! Hey man, you are a magician!

@jeremycoleman318 Жыл бұрын

Yeah this isn’t possible period.

@jeremycoleman318 Жыл бұрын

It’s like saying you can stretch out one piece of bread into a full loaf of bread.

@jeremycoleman318 Жыл бұрын

Pretty sure you don’t need to acid etch and get a reaction when it’s the same steel?!?!?

@lancemillward2462 Жыл бұрын

that never happened there were lots of bits that were not sticking. and the billet was much smaller.

@4g63mark Жыл бұрын

Exactly!!! It's kinda like those videos of 2 native guys digging this elaborate underground house with a pool using a couple of sticks...... There's usually a big jump in progress, but the excavator tracks are covered up in that case so nobody asks any questions.

@rich84lef47 Жыл бұрын

Looks to me like the wrenches didn't work out. Had to go with plan B. lol.

@LascielInviere Жыл бұрын

"I tried to make a hunting knife out of rusty wrenches I didn't even bother to clean because I have no idea what I'm doing and screwed it up, so I decided that instead of owning my mistake I'd just lie for views" fixed the title for you.

@vcommandarv5916 Жыл бұрын

Yeah he should've cleaned them then put them in a steel box full of flux and iron oxide and welded that box shut, and maybe pressed it instead of hammering, i think he would've succeeded then 🤔 Edit: and maybe surface grinded the wrenches to make them flat?

@eddiepierce7028 Жыл бұрын

As an ex-fabricator, I agree 100% that steel will not last. If it does, I’m playing powerball again.

@PinM3 Жыл бұрын

Did anyone in this thread stop to think that maybe it wasn’t about the functionality of the creation but simply what he made of it?? People would still pay hundreds for it just because someone took the time to make it with their own hands. Try appreciating the work of others instead offering criticism.

@PinM3 Жыл бұрын

But since criticism was offered how about you all create something “better” and post it.

@raymartin7408 Жыл бұрын

I like the knife for what it is.He worked way harder than he had to but that being said would last me my life time . 😊

@user-we5cq4ri6n Жыл бұрын

Какие щели между рукояткой и ножом!Со временем они только увеличатся.Такое ощущение ,что делается все на скорую руку без подгонки!Нет качества в изделии!

@rpc717 Жыл бұрын

What happened to the wrenches? I'd have thought that to forge weld items with so much space you'd need a canister and filler like a powdered steel, otherwise you'd never be able to get rid of the occlusions.

@user-ik6de3yt3e Жыл бұрын

Neither was he. That is why he does not show what happened at min. 5🤣

@derangedmetalworks9489 Жыл бұрын

It can be done without a canister or powdered steel filler. It wouldn't be much different than forging motorcycle chains. Otherwise, you are correct he has a lot more material in the finished billet than what he started with.

@k3corvette35 Жыл бұрын

The SnapOn Damascus or is it the Craftsman Damascus?

@nyxionn Жыл бұрын

Just throw borax at it.

@rpc717 Жыл бұрын

More borax!

@michaelklimach1339 Жыл бұрын

5:06 ?????🤥 Niemals sind das die Schlüssel. Dieses Video zeigt nicht die Wahrheit 🥴

@horaciodegaudio3919 Жыл бұрын

Hola !! Impresionante el cuchillo que hiciste !! Excelente tu trabajo !! Te felicito 😉👏👏

@andrejohnson6731 Жыл бұрын

It’s well known fact in the knife making community that leaving the welds in always makes the best quality damascus. 👌🏻 No doubt 😂

@PappyHolliday Жыл бұрын

Yes Sir. Great work on that fine knife. I’m hooked on your talent.

@gilmarsantos10_knives_sheep Жыл бұрын

BOM...COM CERTEZA VOCÊ FEZ UMA FACA. A PERGUNTA É: COMO QUE NÃO APARECEU NADA DE LINHAS DAS CHAVES VELHAS 🧐? ENQUANTO VOCÊ FAZIA A APLICAÇÃO DO BÓRAX PARA DEIXAR O BILIT ADENSADO SIMPLESMENTE APARECEU UMA PEÇA JÁ PRENSADA E DEFINIDA EM BARRA CHATA 🧐. NÃO TENTE ENGANAR QUEM É FAZEDOR DE FACAS TAMBÉM(CUTELEIRO) 🧐

@Steel_Wool Жыл бұрын

Поддерживаю вас дешевый обман , те кто хоть немного разбираются в теме сразу почуят что их обманули

@eGearZevo Жыл бұрын

At least an explanation next time that the wrenches didn't work out because...... Not just switch to a solid billet like nothing happened

@carrocomlasanha Жыл бұрын

Eu que não entendo nada achei bizarro, imagina um profissional... achei estranho também o desenho do fio da faca sair perfeito sendo que foi feito com a lixadeira... sei não hein...

@maiaramello487 Жыл бұрын

Tbm sou cuteleiro e sempre duvido dos videos dele... Ele nem limpa as peças para caldear... Muito estanho

@soledadortiz3544 11 ай бұрын

No soy profesional y nunca e forjado y aún así me pareció falso

@D00MTR33 Жыл бұрын

What happened to the chicken bone that was half wrenches and half welds? Did it magically increase 5 times in size and turned into a flat piece of steel around the 5 mi ute mark?

@douglaswoodard3412 Жыл бұрын

hmm im asking the same question

@jeffrix27 Жыл бұрын

What happened at 5:00 ? There's No way you got that much steel from those wrenches...

@bloodgout Жыл бұрын

Noticed that, too?

@Erinnem Жыл бұрын

It like tripled in size haha looks like he made a boo boo started over added mor metal and boom a huge billet shows up out of nowhere haha

@GrrrRu Жыл бұрын

Аиd no Damascus pattern later )

@qmangillett Жыл бұрын

Hard not to notice that little bait and switch tactic. Maybe if it was done slightly slower and not just like "hey a bar of steel"

@andrewallason4530 Жыл бұрын

Well. In his defence, he had no idea. Having blinded himself wearing sunglasses while arc welding the lovely dirty wrenches together, he had no idea what he was doing the rest of the video.

@richardweilandt3315 Жыл бұрын

Nice skinning blade. I love that handle. Nice a big with rounded edges fit for bigger hands.

@JimmCrow Жыл бұрын

beautiful knife, great work

@00ironcross Жыл бұрын

Very cool profile to the blade. Looks great 👍

@Randomknives1 Жыл бұрын

Nicely done ✅

@TKCoutside Жыл бұрын

Borax, the white stuff everyone is asking about, it’s Borax. And where did that nasty pile of rusty wrenches go? I can’t do any of this, but I know a lot about it. Those rusty wrenches were a disaster from the gate 🤷‍♂️

@KrispyBizcut Жыл бұрын

A big ole thumbs up on that bad boy!!! And my god what a power hammer!!!! Damn!

@patricklorio7657 Жыл бұрын

Nice knife, but it was hard to watch you making it! I have rarely seen anyone so careless with their eyes and tools.

@lefty8010 Жыл бұрын

Beautiful knife keep up the good work my friend

@AN-us6dj Жыл бұрын

Amazing. As a beginner knife maker it amazes me how clean your bevels are by hand with a grinder. I want to get to that skill level some day.

@nyxionn Жыл бұрын

Think you need to watch this again my friend, or gain some more experience. It's super easy to grind bevels with an angle grinder when you can edit video. Make one pass and boom the bevels are there.

@WaqarAhmed-rm4cg Жыл бұрын

Amazing work brother.

@sangbintang9107 Жыл бұрын

Semua video mu saya tonton semua Semua yang di kerjakan penuh dengan jiwa seni Hasilnya luar biasa

@whiteshadow1771 Жыл бұрын

Awesome work!

@frankdoughertyjr.7995 Жыл бұрын

Awsome dude.

@jendows Жыл бұрын

На 5:10 произошла подмена , похоже не смог ключи проварить нормально.

@GrrrRu Жыл бұрын

Не пропадать же такому интригующему началу!

@negijose2197 Жыл бұрын

Houve uma interrupção da sequência desse forjamento.

@ChrisRedfield01 Жыл бұрын

Immer wieder fasziniert 💪💪💪

@bothropslularapius4119 Жыл бұрын

He works well, no talk. That's good!

@madiskarteng_bicolano30 Жыл бұрын

Good job.

@jenohathazi920 Жыл бұрын

Bravo Master

@rdot980 Жыл бұрын

I don't like being lied to for views. First and last time viewing any of your content.

@timgore1487 Жыл бұрын

Nice work

@D00MTR33 Жыл бұрын

Love that excess glue and rough finish on the front of the handle scales. There's a reason you usually finish the front of the scales before glue up since it's hard to finish them afterwards and you clean up the excess glue that leaks out before it dries.

@stephanejacquet7668 Жыл бұрын

Vous faites de très très belles lames…. J’adore votre travail !

@koumanian4450 Жыл бұрын

Ou pas le mec vient de te berner dans une vidéo sérieusement, il passe de petite clée avec pas énormément de matière à une barre énorme et bien lisse, ça barre c'est genre 3 fois au minimum ce qu'il as au début Et honnêtement ses couteaux sont plein de défaut

@johanhenriksson6382 Жыл бұрын

That beltsander is sippin on its last dry martini!!

@michaelfolse8140 Жыл бұрын

Can't believe he was welding with sunglasses crazy

@isaacoliver9055 Жыл бұрын

That's a nice knife

@alihussien9.2.66 Жыл бұрын

مبدع انها عمل جميل

@TheMountainMongrel Жыл бұрын

You're the first blacksmith I see, who adds a generous amount of flux on your steel. This is very satisfying.

@terlanmamedov Жыл бұрын

Əla. Yorulmayasan usta. Açarları qızdırdıqdan sonra üstünə tökdüyün ağ rəng duz kimi olan nədir və nə üçündür?

@citizenorycle2129 Жыл бұрын

Miracle billet at 5:02

@carolinahoodbilly Жыл бұрын

As a professional Forged in Fire watch, I can honestly say he should have cleaned his steel and made canister Damascus.

@diemaschine2287 Жыл бұрын

Love how he magically got a damascus pattern from only one type of steel. All those wrenches were the same material so where did the other metal come from to make the patterns he had? The welds he left in? Because those booger welds would have made even more inclusions than the gaps and dirty steel already had.

@matthewryan8463 Жыл бұрын

As another professional FiF watcher, I was wondering if he was starting to hammer the wrenches (while he still had them) when they were getting too cold, based on how dark they got several times...

@nihadmemmedov8355 Жыл бұрын

Əlinə sağliq usta. Axirki dəmir3xlorid gəldi😊 usta qiciq olurdum əvvəlki damasguslar kislataya salmayanda😊. Mən vasmoydan bir nekə yerdən soruçmuşam dedilər yoxdur polad əritmə zavotdan tapmq olar hardan aldız siz?

@glockfanboy4635 Жыл бұрын

Is there a gofundme to buy this man a welding mask?

@MullinPerformance Жыл бұрын

I don't even make knives and I could tell homie pulled the whole... "look over there"...and switched that steel.

@diemaschine2287 Жыл бұрын

Exactly. You cannot get any kind of pattern when just using one type of metal.

@edge1289 Жыл бұрын

Beautiful blade, elegant design, no cold shuts, awesome work!!

@nyxionn Жыл бұрын

Seriously?

@edge1289 Жыл бұрын

@@nyxionn seriously.

@TheRealMeanDean Жыл бұрын

At this point, I feel the sunglasses are for protecting the tools not him.....

@jimmred2651 Жыл бұрын

Hermoso trabajo pregunta ese polvo blanco que es es sal o cal

@glennwiebe5128 Жыл бұрын

Hmmm... I think your original billet long since burnt up in the fire. The mass of the wrenches is only a fraction of the bar. If you would have cut the ends of the wrenches off and then forge welded those you might have had a small bar that you might have used for the centre bar of a San Mai.

@alessandrosaggio927 Жыл бұрын

What is the white powder you put on every step?

@nicastherock Жыл бұрын

Nunca que aquele monte de chaves iam resultar num lingote tão homogêneo como esse. Mas ficou top a faca. Parabéns

@Messiahbolical5 Жыл бұрын

I knew I had to come to the comment section as soon as I saw him weld those rusty ass pieces together. Forged in fire has made us all pros haha

@russsanders5403 Жыл бұрын

Can't wait to watch that tip snap off

@jwdickinson643 Жыл бұрын

are the scales olive wood? they’re gorgeous!

@marcoarc27 Жыл бұрын

Aconteceu um milagre.😂😂😂😂😂😂😂😂 Tão verdadeiro quanto a nota de 3 dólares.

@dj-calvados4271 Жыл бұрын

😂😂😂100%

@d.mat.zero6525 Жыл бұрын

when forge welding never never let your billet cool that much in between heats while you are setting the welds, that's why they didnt stick

@TTAJ Жыл бұрын

Like20,.. 영상 잘 봤습니다!! 또 오겠습니다!!

@tajmajal4197 Жыл бұрын

Korean K9 Rescue K9 Rescue Les 3 Dindes, Ferme-Refuge

@abhishekverma1977 Жыл бұрын

Hello what is the use of that white powder Could you tell the specific application of that white powder that you apply on res hot steel

@jwdickinson643 Жыл бұрын

dumb question time: Why weren’t the wrenches wire-wheeled to remove the rust before welding them into a billet?

@SaltyMafugga Жыл бұрын

I think I just watched 2 different videos combined. No way just after the 5 minute mark he had that much steel.

@frankyantosca5012 Жыл бұрын

What is the white powder you keep putting on the metal once it get very hot? Thanks.

@Eduardot12345556 Жыл бұрын

Borax, to drive out the impurities and make a good weld.

@andrewallason4530 Жыл бұрын

But would be of ZERO benefit when attempting to use such dirty metal as was used here, hence why a completely new steel billet appears at 5minutes.

@SaltyMafugga Жыл бұрын

Found where all my 10mm wrenches went

@Im_Ukrainian Жыл бұрын

Шо не нож то шедевр))

@mikeysgarage3697 Жыл бұрын

Sunglasses for stick welding? Won't be seeing much of anything soon! That death-wheel of an abrasive cutting disc, and a saw blade, mounted directly to an industrial electric motor, sheesh!

@vvs1922 Жыл бұрын

Knives Project :- DONT FOOL PEOPLE WITH FAKE VIDEOS.

@Curtislow2 Жыл бұрын

IKR!!! "TO THINE OWN SELF BE TRUE!"

@vvs1922 Жыл бұрын

@@Curtislow2 What are you trying to say or convey???

@Curtislow2 Жыл бұрын

@@vvs1922 DON'T Try to FOOL PEOPLE.A bunch of old wrenches, which looked like a chicken bone suddenly became a thick piece of steel!!

@yourdrummer2034 Жыл бұрын

KZfaq is becoming filthy with.the amount of fakery.

@derentius Жыл бұрын

Why is watching borax bubble look so satisfying?

@anthonysantacruz5898 Жыл бұрын

What is that powder and what is it for?

@krandelvision555 Жыл бұрын

looking at all kinds of videos today. just curious what is that white stuff you are sprinkling on the item you are working on? I am not a knife maker nor a welder.

@diemaschine2287 Жыл бұрын

Its borax mix commonly referred to as flux. Its purpose is to help remove impurities by melting away carring the impurities away from the metal allowing the carbon atoms to bond.

@bintanglima4573 Жыл бұрын

Why you didnt sand the woodwn handle before you glue them.?

@leor2830 Жыл бұрын

I agree with the below comment regarding what happened at the 5th minute.

@carlmanns9232 Жыл бұрын

Wait a second here, how did he get such a large billet out of that. I smell shenanigans here.

@romeomotorider Жыл бұрын

Hey bro please let know about the trigger warning bro i colaps on the floor because of the welding light

@fabresebrooks9958 Жыл бұрын

Make knife from drill shaving and grinder shaving

@GrrrRu Жыл бұрын

Варварство. Столько ключей на выброс. А там были уникальных размеров...

@sudipmondal5182 Жыл бұрын

Next time cover the welding lights Thanks

@negijose2197 Жыл бұрын

Verdade Gilmar muito estranho.

@albertoproietti9715 Жыл бұрын

ottimo coltello.

@tajmajal4197 Жыл бұрын

Refuge Darwyn SafeHavenSanctuary SANA Shelter

@albertoproietti9715 Жыл бұрын

@@tajmajal4197 purtroppo non capisco.

@joem1413 Жыл бұрын

The second time I'm asking this question, can't this guy afford safety glasses. He's really been lucky so far, but luck will only take you so far.

@andyroo8592 Жыл бұрын

Yeah second time I'm saying this... Mig/Tig/Stick welding (these three are the same) vs Oxy Acetylene vs Forge welding all produce different spectrums of UV light and the eye protection is NOT interchangeable, and in fact using dark glasses that are not the correct type will just do more damage than none of at all.

@vcommandarv5916 Жыл бұрын

Not to mention a particles protection mask, all the grinding and cutting of steel and wood, also the glue/epoxy itself is unsafe in most cases but that will require a chemical respirator

@vcommandarv5916 Жыл бұрын

@@andyroo8592does forge welding using flux require Eye protection? Or are you talking about welding the wrenches together using a welder at the start?

@andrewallason4530 Жыл бұрын

@@vcommandarv5916 using an arc welder with only a pair of sunglasses. VERY stupid.

@andyroo8592 Жыл бұрын

@@vcommandarv5916 I did reply to this question but short answer is a ye as because the FB lux CV ones spraying out everywhere and be it's molten boric acid at around 1000 degrees Celsius.

@jamesjohnson1595 Жыл бұрын

What is the powder he puts on the hot metal? And what does it do to the metal? Is it necessary to use? Thanks.

@lyonmandan Жыл бұрын

Borax, it helps clean the steel and prevents oxidation which helps create cleaner welds

@diemaschine2287 Жыл бұрын

Whats the name of that knife Cold Shunt? 3lbs of Flux? Looks like half the outer layer burned off. Should have saved a bunch of time and chopped the ends off to get a tighter fit from the start. But hey its a knife so mission accomplished i guess.

@Erinnem Жыл бұрын

That is the most usage of Borax or flux I’ve ever seen anyone use on a billet!

@Rowrowthegravyboat Жыл бұрын

Do y’all know how difficult it is to make rough grinding a blade with an angle grinder look easy?

@nyxionn Жыл бұрын

If you mean the bevels I think you need to rewatch and consider how editing works.

@user-ew2hs2is7z Жыл бұрын

السلام عليكم

@januarjansenjansen2870 11 ай бұрын

Om itu yang di tabur serbuk apa sekwaktu besi masih merah itu

@dildarhassan3420 Жыл бұрын

what is this powder? what is this powder putted on?

@stackerothings Жыл бұрын

What is the white powder?

@valeravictordmitr3228 Жыл бұрын

👍👍👍👍👍👍👍

@wadenny Жыл бұрын

No face shield when stick welding!!!! Sun burn much?

@albertoproietti9715 Жыл бұрын

quella polvere bianca che metti sul ferro rovente, cosa è? a cosa serve? grazie!

@ademdogan7213 Жыл бұрын

Borax for prevent oxygen inclusion.

@eddiepierce7028 Жыл бұрын

Did you see how blue the tip was after “grinding”?

@chrisoglesby9071 Жыл бұрын

This man has a sense of humor, but I am missing something.

@bulletcatcher5318 Жыл бұрын

You seem to be a pretty good knife maker, but please don't try to deceive your audience, by trying to make them believe that you actually made that knife, from that monstrosity of welded up wrenches.

@marbylaserna3986 Жыл бұрын

👏👏👏👏👏👏👏👏👏👏👏👏👏👏

@jondrak2219 Жыл бұрын

Gotta love how many people pass off 90-99% machining to 1-10% smithing as 100% smithing. Not even gonna start on all the other obvious problems in this video.