I MADE A HUGE MISTAKE WHEN BUILDING MY JAZZ TYPE R...

Рет қаралды 187,440

15 күн бұрын

Nord VPN: Get 4 months extra on a 2 year plan here: nordvpn.com/jackmcneill. It’s risk free with Nord’s 30 day money-back guarantee!
In this video we discover a big problem with the Jazz Type R that may put the whole build at risk. But before that we make sure to add a load more crazy modifications to turn the Honda Jazz/Fit into even more of Jazz Type R to make it look even better! Previously we have fit a K20A2 (K-series engine), known as the K20 for short, which is out of a Honda Civic EP3 Type R and we fit it into the car - but what did we do wrong on the install which has caused some ... issues?
Project 7 Customs:
Instagram: / project7customs
D5 Graphics:
Facebook: / d5graphics
My TikTok:
Username: jack.mcneill
Link: / jack.mcneill
My Instagram:
Username: jackmcneill.cars
Link: / jackmcneill.cars

Пікірлер: 745

@JackMcNeillCars 13 күн бұрын

Get 4 months extra on a 2 year plan here: nordvpn.com/jackmcneill. It’s risk free with Nord’s 30 day money-back guarantee!

@Mattlawton-ft6ew 13 күн бұрын

You can afford to buy a civic type r tho 🤔

@Mattlawton-ft6ew 13 күн бұрын

Why haven't you primed the rocker 🤔

@Mattlawton-ft6ew 13 күн бұрын

You need a 3 door car

@Mattlawton-ft6ew 13 күн бұрын

Thoes rear lights 😍👍🔥

@jonathanhughes8326 14 күн бұрын

Looking great mate only one thing I’d do is put some wheel spaces on they a little too tucked into the arches

@jarrad5723 13 күн бұрын

Wrong. Looks very track ready.

@jonathanhughes8326 13 күн бұрын

@@jarrad5723 it might be track ready but looks wise would look great with spaces

@LeSwexy 11 күн бұрын

@@jarrad5723 You have no idea what you are talking about dude hahahahaha. Spacers have nothing to do with a car being track ready.

@JNASLDN 11 күн бұрын

if the plan is to only track it, i suggest avoid using spacers, but if its for mainly for show purposes and normal road use, then defo get some spacers on.

@LeSwexy 10 күн бұрын

@@JNASLDN Spacers do absolutely nothing to a track ready car man, infact a lot of expensive high end cars already have them from factory to get a perfect fitment. Including Porches and BMWs

@mattharrison1061 14 күн бұрын

hi mate, if you get a flat sanding block and scuff at the Honda badge on the rocker, it will leave a chrome finish Honda logo and look 10x nicer :). just a suggestion

@Dingo-Blurps 14 күн бұрын

This is proving to be my favourite KZfaq build. Once those issues are sorted and it's had a new set of white clothes it's going to look truly amazing.

@JackMcNeillCars 14 күн бұрын

Thankyou ❤️

@Danny84. 14 күн бұрын

Sort the honda badge on the rocker cover. Scrap the paint off and paint it white or leave it sliver 👌

@JackMcNeillCars 14 күн бұрын

Yeh doing this soon 😎

@mikedinni6318 13 күн бұрын

Scrape*

@Danny84. 13 күн бұрын

@mikedinni6318 you tell I stayed in school csnt you 😂😂

@thesilentgametestr 14 күн бұрын

Build is looking good. I don't know if you were already planning it, but after seeing the new interior change the grey roof/pillar lining let's it down and would look much better if it was black.

@djmandrick 14 күн бұрын

JDM ep3 had a front diff which I've had fitted to mine. (I imported one from Japan, new, for an Integra - there are limited numbers so if you see one get it). Expensive but game changer. If you were excited about the first drive what 'til you get it mapped, they drop Vtec to 4600 and up the RPM to 8200. Its a different animal. check oil regularly and keep 1L on you, you will burn oil each time you're in VTEC. If not, its not monitored and it is oil starved even for a short time. it's likely blown head gasket time. Hope that helps. Always use genuine Honda parts and my performance garage also recommends keeping Honda oil in it.

@JackMcNeillCars 14 күн бұрын

Thankyou for this advice man!

@djmandrick 13 күн бұрын

@@JackMcNeillCars No worries, I'm really enjoying the build, the drive to get in there and give it a go is commendable. I had my oil changed last week and after refiling it they pulled the fuse (Im guessing to the fuel pump) then turned it over for about 5-10 seconds. When i asked, was told this allows oil pressure to build up, before they refitted the fuse to start it. Prevents you running it from dry as he said in some cases it can take 15 seconds on start to get the oil up to pressure and all the way round. Thought I'd pass that one on as i noted on your first start up just fired it up on it's first go. Looking forward to the next one.

@garystinten9339 10 күн бұрын

I thought all oil came from dynosaurs.

@Kypcia 9 күн бұрын

Some of the information you've given is false: - Get it mapped IF there are any mods. Standard ECU map will do fine. - Map on a dyno - dropping VTEC without any significant mods will result in a power dip - Honda knew where the crossover should be put. - Reduced oil will result in oil starvation, usually ruining the crank bearings and the engine will knock. The head gasket will blow on age, overheating or boost. Otherwise yes, a front LSD is good, OEM helical. They are easy to find in the UK and usually a whole gearbox with LSD is around 700-800 GBP. I would recommend a shorter final drive from FN2 (5.1) or a 5.33 (much rarer, like FWD USDM K24 CR-V and such)

@GILESY1973 14 күн бұрын

Turbo the jazz 👍🏼

@TheCommentator353 14 күн бұрын

Real vtec is n/a 😂

@Zikhr 14 күн бұрын

Takes away most of the fun of the car, trust me

@anon7661 12 күн бұрын

Its pissing oil as it is. 10k that engine apparently 😂

@jedbriimc9879 10 күн бұрын

he may make it back from advertising luckily lol

@anon7661 10 күн бұрын

@@jedbriimc9879 he already has 👍

@draidangraham 13 күн бұрын

Jack, you have nailed the formula. Your project is relatable, your filming and delivery are spot on, editing is great. Huge future ahead of you. Keep creating, I love it 👍

@JackMcNeillCars 13 күн бұрын

Thanks man 😇

@FSP9. 14 күн бұрын

We need a POV drive when’s it’s all done 👍 and some more driving clips 🫢

@JackMcNeillCars 14 күн бұрын

Deffo 🔥

@da-mazing8500 14 күн бұрын

This needs a spoiler now and with paint, will look spot on 👌

@marcosstables 14 күн бұрын

Paint it white!

@KartsAgainstHumanity 14 күн бұрын

You are living my dream... I don't think I've ever said this but this is my favourite build on youtube. It scratches my brain in the right way with how you're doing pretty much everything properly OEM as if it were factory. And the Jazz is a seriously underrated car past it's grandma reputation - Love mine to bits even in completely standard form. Maybe I'll keep it when I get a new car and hopefully do something like this some day.

@JackMcNeillCars 14 күн бұрын

I’m so glad you enjoy man! It scratches my brain just right too😂

@user-vd1wo8px7f 12 күн бұрын

you should we painted white right now

@tahahaider5836 11 күн бұрын

Oem+

@KartsAgainstHumanity 11 күн бұрын

@@tahahaider5836 As it should be 😎

@andrei1308 14 күн бұрын

Watched this build from the very beginning and man, all i want to say is that this is my dream car rn. There’s something so classy about a pure n/a 2000’s honda, i love it, keep it up

@CreeperSlayer3Gaming 14 күн бұрын

Hi Jack, love this series, keep up the great work!! ❤ 👍

@user-xz8do4vq4x 14 күн бұрын

Keep up the good work lad, loving the Jazz 🤙

@deanmathers4483 13 күн бұрын

Really enjoying this series and your genuine enthusiasm, keep up the great content.

@8B0Gaming 14 күн бұрын

absolutely loving this series, keep going mate your doing a great job, supporting from New Zealand

@jlee7294 14 күн бұрын

Eagerly await each episode of this series, keep them coming!! 🔝🔝

@JackMcNeillCars 14 күн бұрын

Thankyou!

@JayDavidson46 13 күн бұрын

Honestly my favourite creator out there I love the effort. For the boot, move the jazz badge to the left side and the type r badge on the right.

@haideryhhh_ 14 күн бұрын

Looks much better!! Love the videos jack keep it up bro.

@harryvalvlogz1381 14 күн бұрын

This car is turning out to be soo good. Please don’t side body this like the comments are saying it’ll just ruin it’s beauty 🙏

@nigeledgar3683 14 күн бұрын

Very tasteful mods mate. I love the OEM+ look.

@JackMcNeillCars 14 күн бұрын

Thankyou!!!

@dannywaghorn7120 14 күн бұрын

Loving this build!!! Done the way i would do it, modified but looks OEM. Perfect, keep up the good work.

@KiwiColour80 8 күн бұрын

You Remind me so much of myself 20 years ago on my Saxo VTR in my parent's garage - Wish we had youtube back then or the thought to document stuff in the max power era like you do now! . Im 44 now and run my own bodywork business so its gone from a hobby to a living so ive no time or willing for my own cars!! but enjoy watching you and others. Car looks great. bet they'd go wild for it in Japan when it's done. All the best.

@voidbringer7481 13 күн бұрын

loving the vids mate a great series keep them coming!!

@JakeHewlett 14 күн бұрын

The JDM type R you used at 20 seconds in happens to be my old car, awesome to see it still used, good luck with the Jazz 👍

@StanleyKubick1 14 күн бұрын

stoked for you! sand or scrape the paint off the honda logo for the full effect

@JackMcNeillCars 14 күн бұрын

Hahaha yes soon 😎

@forestfaint9269 14 күн бұрын

Recently started to watch your videos, love the build! Not only you get a Type R experience, it can also be used as a proper family car unlike the Civic Type R!

@BACrypto 13 күн бұрын

Keep up the good work! You're smashing it!

@GL-oo9kc 14 күн бұрын

Keep going with it!! 84k subs already!

@Jake_Be 13 күн бұрын

Love what your doing to the car man, you’re absolutely doing this car justice Maybe some spacers to get rid of that wheel gap you have??? Also if u want you can get some performance pedals for the car too (there is some metal covers that go over the old ones if u like)

@kiwi_commander 13 күн бұрын

I love the route you are taking this build; it definitely looks like something that would have come out of a Honda factory. Keep up the great work!

@Skurvster 11 күн бұрын

Good call on replacing the timing chain, genuine parts = Honda reliability. Make sure to change the chain tensioner if you replaced that with a cheap aftermarket. Watch out for leaks on the valve cover. That wrinkle is not going to seat the cover seals correctly and will bleed through. If you clutch pedal is hard, now is the time to replace them. They cheap, an exedy oem, try Tegiwa. Also a good time to replace the flywheel with a lightened facelift one if yours is the pre facelift engine. After a skim, they good as new

@Snoop_gee 13 күн бұрын

Re: Engine since your doing the timing chain etc. Please look into skunk2 Kseries Timing Chain Cover RAW or Black . Features a two-piece design which facilitates easy timing gear access and cylinder head removal

@beardedtaylor4388 14 күн бұрын

Love this build buddy. That interior wow just wow! 👍🏻

@xconankunx4530 13 күн бұрын

Love this channel and build!! I'm all for it. Sheesshh🔥

@xconankunx4530 13 күн бұрын

I love the Type R interior, looks so nice. The tints on it look schmick as sheesshh❤

@-Lucky-Six- 11 күн бұрын

loving this series, if youre going to the trouble of full paint while you smooth the wiper delete on the back, do the same for the rear door handles (obviously NEVER flip the child locks on though!)

@zmelo5511 14 күн бұрын

Love the series!

@xxericxx1048 14 күн бұрын

love the videos so far man !! i think that the red on the engine cover looks a bit odd without the manifolds being polished , and now that you’re taking the engine out , it would be the perfect timing to do that. Keep it up mate 💪🏼

@Snoop_gee 13 күн бұрын

it honestly looks so much better the red valve cover, tail lights and interior . continue to make it look amazing. so invested in these episode continue to do your good work.

@djalextruth9152 9 күн бұрын

Hi Guys, just found your channnel and found it interesting, I am a motor engineer and a honda FD2 owner, love what your doing and yes you will make a lot of mistakes .. its all part of the fun.

@djalextruth9152 9 күн бұрын

Oh and they do make a type R jazz in japan its calle a fit R

@stuartsnowden4824 10 күн бұрын

Just discovered this. I’m a Honda fan. I bought my first Honda In Australia in 2005, an Accord Euro (as it was named in Australia) 2.4 litre iVtec. Then bought my first new Civic TypeR in 2007. Traded that for a new 2010 Civic Type R. My wife currently drives a 2017 Jazz. That’s the 4th Jazz we have had. Nice content…keep it up.

@moamed2006 12 күн бұрын

I've always thought a dream hatchback would be a jazz type R, the jazz size/practicalness with a performance engine and you correctly made all the right choices, the wheels, removing the smoked lights (chav spec) and changing the boring silver jazz colour, well done keep it up!

@MrLipynho 14 күн бұрын

Well done mate, great video, please continue

@jordymartin97 13 күн бұрын

Keep these videos coming there amazing and we are learning a lot 😊

@marky8868 14 күн бұрын

Looks great mate! Well done. Definitely jet wash the engine bay when you get the engine out. Looking forward to seeing the progress!

@tomahawk8636 14 күн бұрын

I've got those rear lights on my jazz. You'll need to replace one of the reverse light bulbs with a red coloured bulb and use the rear fog light connector for an MOT 👍 really glad I found your videos, you're doing everything I wish I could do with mine! Such an underrated car, bet its so fun to drive with the engine

@JackMcNeillCars 14 күн бұрын

Hahah yes it is man! It’s the best car I’ve owned 😂

@spadeykins9114 10 күн бұрын

Love the channel! Jazz Type R is going to be great!

@S2KG 14 күн бұрын

U need bigger spacers for the rims and a sports exhaust manifold to make it look a lot nicer 😉

@ryank5088 13 күн бұрын

I've used that VHT a handful of times it's good stuff... I use a piece of wood underneath the cover so it's edges aren't sat on the ground. 15 minute intervals and then heat but what I didn't know till later on you can spray any areas that aren't wrinkling as much. Keep it up 🤘

@liamtownshend7726 13 күн бұрын

Looks sick mate SPACERS FOR THE WHEELS NEEDED NEXT !!!!!!

@danielthompson743 13 күн бұрын

You are a genius your doing what everyone of us wants to do, keep this content up, very unique

@fear_niclovo3187 14 күн бұрын

Ok first: spoiler, bigger disks, bigger Brakes, better suspension(lower), AWD?, turbo tune !!!!!!!!!!!!!!. Second: love your serie man its really cool to see a normal car turn into a sportscar. Keep up te grind 💪💪

@maxking1431 11 күн бұрын

I always see whipping around you woodley late at night, can hear you coming a mile away haha! love the content bro

@demo6586 12 күн бұрын

Ur videos literally give old day matarmstrong vibes love it!

@kimi1984 14 күн бұрын

Hi Jack! 50/50 on the new rear lights. HOWEVER, looks good. Get yourself some silver indicator bulbs, they'll make such a subtle difference, but look great! 😊

@StraightOutThaGudda4U 13 күн бұрын

Love how everything came out! Just need custom red floor carpet and the interior will be done! And find a way to wire that new cluster gauge in because that one looked wayytt better haha, love all the progress on it and pulling the motor out and getting everything painted is the right move, now you know all your mistakes it's time to get everything done right 😎 great work man

@ifrazahmed1693 14 күн бұрын

Love your build man.. keep it up

@focuslensiv5260 14 күн бұрын

Thank you for sharing your build with us mate❤this is so cool..

@alisonchristie-upton6212 13 күн бұрын

Awesome! Loving the new interior. I have a Jazz sport with the dull interior... so maybe one day...

@Automotiverecoveryuk 11 күн бұрын

Well done enjoy the journey 👍

@mellowmist3464 14 күн бұрын

Rest of the interior black would look good, also red seat belts.

@golzii3255 11 күн бұрын

Love how it comes out. 🙏🏻

@BIN3RY 13 күн бұрын

15:34 those rear lights look so good. The tinted ones looked ok but the 4th attempt really hit the mark 👍

@mbfcamanslife 14 күн бұрын

Brilliant work. The car really is starting to look bloody good.

@epiccarshow 13 күн бұрын

This is the best KZfaq build I've seen in a long time. 👏

@da-mazing8500 14 күн бұрын

Well done on the steering wheel. I was waiting for the to bash yourself in the face!! Jeep it up. Really good series

@Atochaf1 12 күн бұрын

I like that you are honest and admit the mistakes you make! That's rare nowadays! I wish I was 20 years old... I'd start a Honda like that too. :) Keep it up! It's getting better and better!

@Scotty_AV 13 күн бұрын

Replaced the chain and guides with genuine parts on my K20 engine which was second hand, after replacing on my FN2. Chain kit + guides was £550 just for parts. Subbed, I told Honda UK to do this a long time ago, but was told that they don't want to upset their loyal Jazz customer base. 🤣

@scottporter2513 12 күн бұрын

Got the rear lights spot on now! 👌

@subaruhawkeyeimpreza 9 күн бұрын

Good work bro, only thing externally I’d add is a rear spoiler, interior wise I would get the carpets redone to make them more black to suit the colour of the seats

@rogerjones8069 14 күн бұрын

Didn’t see any rear headrests and now it’s such a killer jazz - all your mates will be piling in the back - not the most comfy of things without them! Black like the EP3 to contrast with the red 👍 paint 100% the way to go. As a few have said previously, slight spacers to fill those arches a touch more. Really fun build to watch

@bennyhendricks3986 14 күн бұрын

Put a type R spoiler on

@isitafox 10 күн бұрын

Good choice on the rear lights, just needs the optional boot spoiler if you can find one!

@f12ehn4 13 күн бұрын

sick type r jazz would look sick in that white keep up the good work loving your builds

@f12ehn4 13 күн бұрын

if only you could get custom headlights

@samwilson756 11 күн бұрын

When using rattlecans for spraying to help avoid heavy spraying hang the item you want painted. You want the can to be vertical while spraying. The 1st coat should only be a dusting and should take atleast 3 coats to cover the material completely

@Ashley-lb9jz 8 күн бұрын

Brilliant, im now on Gumtree looking for a honda jazz 😂😂😂 awesome content as usual thank you 👍🏼

@Lassalrc82 13 күн бұрын

Keep it up. It looks fantastic. 👍

@blackmamba2408 13 күн бұрын

gOOD jOB mate!!! more fit video to come..

@1066wastrel 12 күн бұрын

Good luck making it go round corners Jack, mine wasn`t even helped by a set of Toyo sports boots, mine go`s around corners like a puppy on a leash, I reckon your gonna need a roll cage! Really enjoying these posts BTW, I hope it`s all worth it in the end, you seem to have some quite talented mates so make sure to give it to someone who can get the best out of it when your finished for a spirited test drive!

@kris-english 11 күн бұрын

Subbed. This is EPIC bro.

@joshpollard9098 13 күн бұрын

For the speedo you can open the both up and swap over the dial graphics and needles then you can install it using the oem plugs

@edwardalannewton8591 14 күн бұрын

Love the videos jack

@charleswrigley9488 14 күн бұрын

Roll on when it's all finished enjoying the car project jack what's your next one after this

@jclc4201 13 күн бұрын

Nice vid man. Powdercoat the headers so the engine bay would look cleaner.

@TIM612826 12 күн бұрын

Just subbed, awsum stuff dude. You are cool and so is your content!!!💯

@zadkrizman3016 14 күн бұрын

Make the interior black and red like the seats🔥

@svenvanwesterloo173 11 күн бұрын

Awesome build !

@moegamatcassiemdevine9257 13 күн бұрын

What an amazing build! Dont forget to add the jazz vtec (sport) rear boot spoiler. Unless you plan on adding a mugen style spoiler that will mimic the civic type r?

@gavinstreet9694 13 күн бұрын

I have loved watching this build nice to see a car that most people could do rather than the usual super cars. Interior looks great, are you planning on changing the carpet/door pillars and head liner to black as that would complete it, it never ends does it 😂

@Lordwrightyy 13 күн бұрын

Loving this bukd . Defo think Wheel spacers and a type r type spoiler will look well. Are you cleaning up the engine while it's out too??

@aaronmartin1584 14 күн бұрын

Looks so good man just missing a type r style spoiler 🔥🔥

@NAMEDTODIE 14 күн бұрын

randomly found the channel yesterday and was enjoying all your jazz upgrades, then today a jazz happens to drive past me :') wish it was this one haha

@19sasuke91 13 күн бұрын

I love how u just dive in and get it done problems? what problems i got solutions - Im on the path to doing this myself just need some starting money to get a project car and bits to fix it!

@k24you 14 күн бұрын

Rocket cover should be tighten in several order and torque by the spec . Also you should check condition of the gasket and clean all surfaces if you don't want leaks 😂 only friendly reminder 😉 great work . With a red Jdm carpet will be amazing! !

@JackMcNeillCars 14 күн бұрын

Hahah Thankyou bro, but engine won’t be running until after I sort the front cover leak so no real reason to follow the torque specs and order. But thanks for the heads up anyways probably would’ve forgotten 😅