Boom

So satisfying to watch! 😃🙏🏾❤️

Kev, a standard electricians socket screw is M3.5 and they're available upto 100mm in length. Unscrew one out of a socket or light switch and see if the thread is the same as you need

I think you can now say that kev is basically a pro at working on rc cars he could own a whole hobby shop

That was a cool parts upgrade. The 3.5mm bolt are the same as your electrical sockets around the house. So you can get double length plate screw from any decent electrical shop. Fun vid👍🏻

You should put “It’s Christmas Every Day” on a t-shirt

I think Kev should make a new video series of opening posts cause its so satisfying.

That's the way to film a rebuild! All high speed with power tools, and good lighting, photography. Promoting PPE too as well done Sir👍

What an Epic build Kev 😱!!!! Loved the bench clips too. That hit in the grass was a bit rough 🙀🤣. My front RPM broke the second time out, but it was really my bad landing on a huge pipe from height. 34/34 gearing should work about perfect with the 800kv 👌. Just need another limitless spool gear for the spur, or you could fit 39/39. You're gonna love the M2C 7mm shock kit Brother. 🍻😎💪👊👊

Finally the full vid is here

Kev's video makes my day!! it's feel like ITS CHRISTMAS EVERYDAY ❤️

Anybody else love seeing Kevin build rc cars like this?

Imagine humans that scale , going to work would be epic

I love how Kev uploads great videos so reguarly

Damn I can’t believe that rear arm shattered like glass! But that chassis is tough as nails👍😎

You need a 39/39 gearing and the frond and rear diff 500.000 oil and the middle silicone earplugs. It's a perfect combo with this motor and ESC (i have exactly the same setup and it's a BEAST!)

2:45 *Music plays*. Memories come back from 2014

Challenge : singing "it's Christmas everyday" with each time a different melody

Lol hey I use those expensive dewalt hammers like that also.

Great job Kev, love these longer videos.

epic! Can't wait to see how it performs with that servo and some better arms/shocks. arrma can not make 8s arms lol... you'd think they would start copying rpm by now haha

The chassis didn't look that bent to me🤔. It's amazing how you could easily get fitting upgrade parts for this model🤔. I thought you had to use modeling adhesive with the screws also, for better construction🤔. I usually lubricate any moving parts with CRC and top grade machine oil. This also allows for smoother performance, increased speed and handling, gear performance, and less friction and overheating potential. I'm not experienced with pulling things to pieces and assembling, building from scratch though🥴. I have a lazy streak, thats hard to conquer😖. I just like things to happen quickly, with little fuss. But I admire your skill and ability here. I don't think its necessary for rc vehicles to go so fast though🤔. Around 60klm is plenty I think, just to enjoy racing them. When they go too fast, I don't see the point, when they just shoot off into the distance🥴. It's all relative really. Eg. Going faster, accidents are just as fatal with an upgrade, as it is having an accident without the upgrade. What we have to remember is, that the original manufactured model, is specifically designed to be adequate for the max speed it does🤔

kev's craziness is concerning yet entertaining. Glad he actually works on and upgrades his rc's. Even fabricates things to make it work. Thats how you rc!

we love longer Kev videos, keep up the good work!

Fun fact: This motor reminded me of the McLaren's Formula E motor. Maybe twice that size. 5kW/kg.

You get it to belch heaping amounts of smoke, and I'll send you as many American Flag stickers as it can hold! Love your stuff dude, keep up the good work

Yup I did almost all those M2C upgrades on my Outcast 8s too, except for the steering stuff. I also added front and rear K8S EXB links and rear K8S shocks all around. It's a freaking BEAST now. I also replaced the diff cases in the front and rear diffs with aluminum Arrma ones. The plastic diff cases split apart.

It always amazes me how EASY you make everything look when you're "wrenching" 😁

at this point M2C racing is making like half of their sales just on Kev.

The sound you put when you break stg is absolutely epic!!

This man is crazy. We need to keep it going!

Hey Kev, little Tip from a 1/8th scale buggy racer. We put a lot holes in the back of the spoiler. With that done the car is much better to control in the air. The chances to crash by a bad landing is much lower now. (Sorry for my bad English; greetings from Germany :) )

1:25 aah I see what you did there bc arrma fans are missing some salt

Anyone who wants a armma just buy the body shell and go to m2c for the rest of it lol

I love longer vids from you. Great build

Awesome video Kev!!! I love watching you build stuff haha what's up with the salt shaker with your sticker on it??

You need a “WHAT HAPPENED” shirt with random broken RC parts on it!!!!

oh my gosh, what a nightmare having to screw with that chassis for those that just wanna bash and drive around when they have so very little free time after work and family obligations. I cant imagine having to replace all that after such a short period of time. Not to mention having to spend even more money.

Haha, I love the location tag 'bollucks' that's what arrma chassis are!!

I don't even play with RC but you had me at the "Dewalt" torque wrench/hammer combo.... big ole thumbs up..

Kev, how’d the driver handle it? I had a woman back into my truck and try to blame me because my bull bar sticks out on the front?!

Another awesome banger from kev! These vids are Christmas everyday!

Great video Kev! Wrenching, bashing, crashing! Watched entire video 🤙🏾

Man that’s a nice build🔥

I wish i could have one big rc's like that!

Hey, nice build man.. looking forward for big scale rc buggy with big motor..

Man.. I love the look of all these beautiful parts

1 to 1 gearing is perfect for the 800kv hobbywing combo

him replacing the stock body of the rc sounds is just to satisfying.

keV, 3.5mm screws are standard socket and switch faceplate screws

I want to put an m2c chassis on my arrmas but I’m terrified of the process lol I don’t think I’ll ever be able to do it. Looks complex. Not when you do it. But you make everything look easy.

LOL Kevin is like a honey badger.. “he don’t care” 🤣

Yeah Kev try 34/39 or even 34/34 1:1 gearing, I run 34/39 with the same electrics Beefcaked out and it's good. Gives you more torque to correct with all that weight. Horrible landing mate exploded them Stock arms 😔😂😂 Let us know how them RPM ones do... Unfortunately no droop setting on them arms so guess "Pick your Poison" Then you will need either the EXB shocks off a breaker site or I would get the M2C ones about to come out. I just got a set to test 7mm, hardened, and 7075 ends💪.... Dudes are still killing the EXB ones... So that's what I suggest. I should have a video out soon on them. Shame all you have to do $$ to these 8s Rigs but once there right they are beastly. Side note, them HUGE batteries just asking for more weight Dammage. I personally don't go over about 6700mah in my big rigs especially off there M2Cified 💪 Bash on brother.... Great vid mate

WOW 🤩 that’s a cool build, nicely done 👍

Excellent video, love to see all the wrenching 👍

12:34 LOL love watching your videos!

Hey Kev! Could you do some more videos with your Trx4, Thank you!!

This was a complete rebuild Did enjoy watching it These videos remind me of me and my friends breaking stuff and putting it back together

Looks good I run rpm arms and love them haven't broke one yet but I'm not as ruff as you are! Haha👍

I bought some metal arms for my Kraton 8S and they’re absolutely lovely they never bend and they’re absolutely tough

You defo nuked that one Kev!! Just at the beginning I was muttering 'shock shafts'll go' ... sure enough, and quite a bit more! Very entertaining - glad it's your wallet, not mine, but thanks for sharing. Al.

Kev you crack me up bro honestly 🤣

When you are with your friends on a race track or in the park is my favorite part of the video 🤪😜😋👍🇸🇮 greetings from sLOVEnia europe

I'm bored so I'm just rewatching all of Kev's videos🤣

Freddy music at 2:42 lol. love the vid kevin its not easy to take apart and put those cars together the speed and accuracy you do it. Id love to know as much about rc cars as you.

I run a 39-46 gear ration for bashing and a 25-25 belt drive for speed running.. for xmaxx and outcast 8s. Good stuff kev!

2:01 can u please try that whit an m2c chassis

Kevin, besides the car, I have learned something from you. I was just wondering How you use that drill on those screws without locking then so tight due to the power of the drill. thanks I like your video's

Hey Kev, you should get the hobao hyper sste, it's a really fun truggy. You should definitely try it!

Kev, u‘re the BEST!💥🔥⭐️

These videos like this Kev are the best thank you

YES!!!!! 15 minutes you did it Kev! Thank you sir!!😁😁

Wow tht was crazy, cool truck tho

There is something oddly satisfying about the "wrench it back together" part of the video.

Nice that Kev!

Kev When the postman is here: Oooohhhh its christmas everyday

Kev, if you are ever in desperate need of a longer M3.5 then buy a plug socket face plate screw from somewhere like Screwfix. Yes, they are a slot head but as a temp it may do and they come in different lengths.

Thats awesome! The downside to big heavy trucks tho. I was gonna go bigger from my arrma kraton 4s, but i think im good🤣

Kev needs at shirt with just “Kevin Talbot” on it with the game over on the back

Do you ever put supports underneath the motors to keep them from slapping the chassis on landings?

Why is it so satisfying when a rc car gets new, shiny upgrades?

Fun vid Kev. That truck is quite a unit now. I do have to ask though, at what point is it no longer the truck that you started with? I still have my original Hornet from back in the 80's, but I'm really not sure which parts of it haven't been replaced at some time or other.

that Outcast is on fireeee🔥🔥🔥🔥

Finally the video i waited for! What about the outcast 8s exb? Are you getting one?

WoW!! What a HUGE difference. Such a BEAST now

Omg that thing is built to beat that kids height record. 100mph easy with that set up. Looks so good with the polished aluminum. Tim the tool man Taylor would be grunting.

3:19 that song brought back so many memories.

Im a old e-revo driver and put a castle mamba monster 2 combo in it. Man its sick. Also a 2wd slash and wondering if there is any must do upgrades?

Top notch. The full speed sending was amazing

Hey Kevin, can you do a video on hobao and what you think of them.

What kind of oils do you put in shocks jumping that high? Or doesn't matter coz it's gonna bottom out anyway.

That car went from a sponge to a tank lol, the chassis improvements are insane

After Kev does all the hop ups to the EXB series from Arrma. What is still left stock and would it be cheaper to start from scratch with upgrade parts and build your own. I want a Kraton but wonder if I should build one from upgrade parts?

Nice mate i have to take mine over there

Could also drill that servo out and tap it for 4mm, then you can more easily find screws that fit it.

Thats one clean looking build. Except for that one gasket that your shop vac ate

This looks amazing

the classical music just makes it THAT much better XD

I envy you having so much fun with your rc hahaha

thats is BOOM!!...but would like to know the banggood special power wagon...how it does now...