I Spent Top Dollar Buying This Special Edition Race Quad
Рет қаралды 85,508
Жыл бұрынI buy a 2006 Yamaha YFZ450 special edition quad that has some major problems. #Yamaha, #Special,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
@donovanelder Жыл бұрын
Hey Joe I noticed a loose exhaust clamp moving around on the throttle side when you first started it. Good luck man, love the vids!
@theconservativeconvict6353 Жыл бұрын
If the guy got to ride it for 15 minutes,it couldn’t have been THAT solid 🤦🏻 you got balls,I’ll give ya that!
@josephhill6863 Жыл бұрын
Joe sold it to the guy lmaooo
@slagdemon Жыл бұрын
I do a lot of engine repair work as a hobbyist and a straight edge is your friend in situations like this. Use your feeler gauge and a straight edge and you can easily identify low spots in the cylinder/head/block without guessing where the issue is.
@ofnaguycarlwatts8602 Жыл бұрын
Bro you wasting your time trying to explain that to a parts changer.thats mechanic terms you're using in here.
@rustrenegade8191 Жыл бұрын
@OFNA GUY, Where is your youtube channel?
@ofnaguycarlwatts8602 Жыл бұрын
UTube is for clout and attention.if a problem comes about I just Fix it . I've done My work. I've forgotten what y'all are trying to learn!! I speak truth!! Real mechanic s read my knowledge and don't mess with me on here bc I agree with them as well!!
@shanewilliams8768 Жыл бұрын
@@rustrenegade8191 lmao this dudes just an overconfident clown.
@thebigtenfarm822 Жыл бұрын
@@shanewilliams8768 also wonder why he would be watching us mere mortals, since he clearly has seen and done it all 😂
@pwnely Жыл бұрын
I love watching your videos, you explain stuff well and i learn by watching! One thing tho, get yourself a camera without zoom noise and a little better focus your videos deserve it!
@brianbiddle2456 Жыл бұрын
joe thanks for the inspiration ,just sucessfully rebuilt rancher and old school king quad.money saving tip...forget expensive wd 40,pb blaster. mix 50 50 acetone and trans fluid.put in old school oil can.spray on everything before disassembly.works great.. fav utuber.keep it up.
@staygold902 Жыл бұрын
KOR racing is where I'd send the head. Ken O'Connor racing. Best in the business. You also need a surfacing stone. I'm sure your aware of Michael sabo. His latest video talks about his surfacing table. It's a requirement imo
@joelcrozier164 Жыл бұрын
I totally thought the same thing, Michael was doing blaster cases, as much as Joe does he definitely needs one, plus a parts washer would be a good investment also, I watch time machines also and everything is cleaned spotless before being put back together.
@ViNNYDICEnice Жыл бұрын
Drinking game for this video: Take a shot every time Joe says milky
@johnnyjohnson2942 Жыл бұрын
I'm from Louisiana and can drink like a whale, but be real bro........................ I'm 10 hrs late how many died of alcohol poisoning?
@stephanieabernathy1882 Жыл бұрын
Or huh…
@ALDA2479 Жыл бұрын
I know I was wanting to yell threw the screen he changed the damn oil it's not gonna be milky its fresh and hasn't ran since
@ofnaguycarlwatts8602 Жыл бұрын
@@ALDA2479 grasshopper's can't see lie's bc they tell them themselves.they believe lie's bc they creating alongside of them 😂😆😂😂😂
@ofnaguycarlwatts8602 Жыл бұрын
@1020 dart I think he's seeing his own patch up work is not All that great. he's literally pointing out his own mistakes. What a moron degrading himself is funny 😂😂😂😂
@johnbest4320 Жыл бұрын
Great video that guy definitely drained the coolant and topped it off with fresh oil hoping you wouldn't notice I respect when people are just honest from the get go I think your doing the right thing rebuilding the way you are I know it is more expensive but you have peace of mind that way the guy looked after the quad ascetics but I think mechanically was to much for him nice it has new front tyres new front bumper be a nice quad when done is the chain okay on it just needs oiled hard to tell from the video nice to see vinny have a great week super looking forward to part 2 and the first ride have a smashing week Joe & vinny 👊💨
@ionuthartagan4206 Жыл бұрын
You'r videos are so good man keep up the good work!👏👏
@PSBEadventures Жыл бұрын
If you get any 5 valve Yamaha you wanna keep or that needs intake valves, put stainless valves in place of the Ti ones and you'll never have to adjust them again. I can't understand the push for titanium valves for just that tiny bit of hp gain. My raptor needed valves after like 100hrs. Couldn't believe it. Put stainless cheap ones in it and rode it many years before I sold it. Now at the shop, If I pull a head off a 5v Yamaha, it's getting stainless. I know this doesn't pertain to the coolant leak, but ya get what I'm saying. Best atv and dirt bike repair channel on KZfaq hands down. Thanks man!!
@jozsef6453 Жыл бұрын
Im always amazed by these negotiations. Here in eastern europe you can go down in price maybe 20% max. Not to mention you can only find here either beat up bikes or beat up bikes that look good and are overprized lol.
@MAJorgy70 Жыл бұрын
It's like watching Deja vu of this same Quad he posted a year ago and the same problem that cause the blown head gasket. Also the same stripped out bolt for the cam shaft bearing is still there a year later.
@reggiexp69 Жыл бұрын
i guess some quads are just a lemon..
@MAJorgy70 Жыл бұрын
@@reggiexp69 It's one thing if someone half assed fix something and to keep it for yourself and keep fixing that same problem again and again. It's entirely different when someone has the intentions to flip it, replace a part that may not need to be fixed, just to say they did something and COMPLETELY ignore the actual problem.
@reggiexp69 Жыл бұрын
@@MAJorgy70 yup...
@greathornedowl3644 Жыл бұрын
Love the channel, Top Dollar - better not need a thing. I hate discussing repairs with you? "Uh, I put in a spark plug, and changed the oil."
@peteraitken6494 Жыл бұрын
Hi joe think the seller knew mate what was wrong with it he sounded a bit iffy to me and the fact the oil looked perfect and clean said something was going down just shows some of these people will do anything to cover their mistakes I remember this quad and was mint when you sold it take care mate great vid as always 👍👌🔧🔧🔧
@dopeman420 Жыл бұрын
If it were me...I'd go n pay that guy a visit, get some more money back...then a few punches to his face n make him pick up his teeth...mabe he will think twice next time he wants to scam someone...I don't play games..dude would be in the hospital.
@benschlack5814 Жыл бұрын
Stripped bolts inside the engine that was you 😂😂
@1damghost Жыл бұрын
good one
@bryanpersig3055 Жыл бұрын
I bet he over heated it after he bought it from you and knew it needed a head gasket and changed the oil before you got there so it wasn't milky when you checked it
@scottrandal3219 Жыл бұрын
I was thinking the same thing
@theyzoomers Жыл бұрын
Over heated it bc this guy had the jetting off as he said in a video
@2vintage Жыл бұрын
@@theyzoomers jetting was rich actually
@nickolasvaughn667 Жыл бұрын
@@2vintage too rich won't cause overheating you just won't have good performance and you'll go through plugs if it's running lean then it overheat and even possible blow up
@bryansawyers3799 Жыл бұрын
2vintage Duncan racing does great machining and port work possibly head repair get up with them hope this helps 🤟
@scrappyhustler7467 Жыл бұрын
The number one thing I've learned watching ur channel is to be consistent on maintenence if only everyone else would do this there would be so many less basket cases lol dont get me wrong shit happens but maintenance or lack of is usually the culprit I'm talking regularly changing oil and filters greasing fittings also topping off fluids and using quality fluids also washing it with a power washer go a very long way protect ur investment and it will protect ur pocket!
@metoon3092 Жыл бұрын
If they maintained it, we wouldn't see this video!
@scrappyhustler7467 Жыл бұрын
@metoon3092 good point but not necessarily shit does crack and clutches fry out tires wear down go flat shit gets hooped but preventive maintenance goes a long way that's all.
@reggiexp69 Жыл бұрын
yup alot of people buy quad or motor as toys and dont do any maintenance... you gotta do the same maintenance as you do to a car.. then again i dont maintain my car but do my quads cause i care more for them then my car if my car works its all good, a quad if it runs it will still have problems if you dont keep it running right
@kernelbadness Жыл бұрын
Resurface the head and cylinder on a flat surface using sandpaper. Color the surface with a marker to see low spots.
@paulriksen5801 Жыл бұрын
great diagnostic.. well done. I love this machine!
@1leggedmedia Жыл бұрын
If I bought a quad from you and it ran forn15 min and blew up and you came to buy it I would have bashed the hell out of you and called you a cheat and all . He was way to nice he knows he did it
@thomask.8533 Жыл бұрын
Mate, you are a true inspiration. It amazes me how well you take setbacks and just soldier on to success. Well done, your videos are a pure joy to watch! One of the best channels on KZfaq, you deserve 10x the subscribers.
@dj27nitro Жыл бұрын
I started making videos working on my quads. This dude really inspired me to do that learned so much
@WreckedRevival Жыл бұрын
Yeah bad head gaskets or cracked/microcracked cylinders and heads doesn't always mean coolant will mix into the oil or oil into the coolant. Funny you had it before and didn't realize it, go through so many vehicles & motos I've been waiting for/wondering if or when that'll to happen to me too lol. 🤙
@chickenbutt.3421 Жыл бұрын
head gaskets have an exhaust side and the coolant side I have seen many head gaskets blow without putting coolant in oil 💯💯
@devinlawson4093 Жыл бұрын
Right guys. This one was clearly burning the coolant in the combustion chamber. There may be a leak at the water pump letting coolant into the oil. Joe should rebuild it and give it back for free!
@reggiexp69 Жыл бұрын
feels like what our yfz450 has... no cooling in oil but coolant leaking on the out side of the engine... cause different head and we didnt resurface it...
@RATADATUAVELHA Жыл бұрын
love you man! keep the perfect work! you don't have anyone who works with a lathe in your area/country? I have in Portugal if you want but it would take long to arrive, fix and send back to you.
@wmonro2227 6 ай бұрын
Its a head gasket Im out 35:17.loooooooooooooooooooooooool watching from Parkdale Toronto Canada 1:30 Sunday afternoon having a beer. I am Canadian.. have you seen the Justin Trudeau Tampon commercial super accurate ..have a laugh...really enjoy your vids fellow brother in arms. My first bike was a MX 80 1979, age 14 I took it apart and put it back together just because ....
@palcolandcattle4259 Жыл бұрын
Its a good idea to sand the head and cylinder surface on 600 grit sandpaper wet lying on a piece of flat glass to find the bad spots in the surface. If they arent that bad you can sand them flat without hurting anything. following a figure 8 pattern will make sure you wont create any high spots or low spots.
@riccochet704 Жыл бұрын
Any machine shop should be able to repair that head. They'll just weld in that gap and resurface it. Call around local to you.
@ofnaguycarlwatts8602 Жыл бұрын
Any real Mechanic would have fixed it the 1st time 😂 joe seen he just said screw it.its money for me in The Future rebuilds.its a no (brainer 😂) get it no brainer 😂😂 sad world of non genuine ppl sad I say
@mark8111xx Жыл бұрын
@@ofnaguycarlwatts8602 my god.. give it a rest. If you dint like him why do you subscribe??
@shanewilliams8768 Жыл бұрын
Dude probably overheated it and knew it, but on a side note, you rebuild enough stuff to get your moneys worth out of a surfacing stone. That would remove any doubts on the mating surfaces from now on.
@ofnaguycarlwatts8602 Жыл бұрын
He's too stupid to use it bro!!
@shanewilliams8768 Жыл бұрын
@@ofnaguycarlwatts8602 dude, fuck off with your punk ass bullshit. you haven't done shit but run your cock holster since you showed up. On here acting like you know it all, but proving that you don't know shit. Lol What happened? Did Joe bone your girl or something?
@TheScottiem303 Жыл бұрын
I’m currently at 6:02, I predict the seller replaced the oil when it was milky based on the way he responded. Didn’t sound very convincing
@Kurtman88 Жыл бұрын
You should be really proud of what you've built here on YT! 👍
@ofnaguycarlwatts8602 Жыл бұрын
UTube is the only thing he's built.sure isn't anything else correctly!! He probably boosted his watch Time and viewers in the the beginning to get monitized. 😂
@MAJorgy70 Жыл бұрын
@@ofnaguycarlwatts8602 I would agree. I just went back to watch the first video he had on this Quad and the same exact problems are still there 1 year later. Pitted head and stripped cam shaft bolt. If he is decent man, he would give back all the money he sold it for to this guy he bought back from because the that guy only rode it 3 times. Hellva scam. I'm surprised he had the balls to post this video show of the same quad with the exact same problems Unsubscribed.
@ofnaguycarlwatts8602 Жыл бұрын
@@MAJorgy70 you said it Best. I will agree with everything you said. If ppl had the knowledge I do they would see right through his stupidity. I have now went onto modify ING my Ñitro engines.hell I have no successfully made my own connecting rods. I have just recently made my own tools to do repinching of the sleeve's for my Engine's. I have yet to see this Guy tune an engine properly and they are always noisy in the Top end.i watch for a good laugh!! It should title his stream's of how Not to do things and then it would make perfect.i have been some type of engine since the age of 13 and now 49. Glad someone is Smart enough to see it like I do. He should pay someone to fix it and Carry it back to the Guy.you can tell the guy was needing money and Joe Joe took advantage of him 2 times.its sad Bro sad!!
@MAJorgy70 Жыл бұрын
@@ofnaguycarlwatts8602 I see that he is naïve on things but I didn't think he was deceptive. This should be a wake call to everyone when buying from a private party. I guess that is why he brags about low balling sellers. 🤣 I watch Michael Sabo @ Basket Case Garage, he shows a lot of detail.
@ofnaguycarlwatts8602 Жыл бұрын
@@MAJorgy70 True man. He knew exactly 💯 percent of what he was doing in the very beginning.but to tell someone it's the crankshaft to get it cheaper. To scam him 2xs then to say that he got bamboozled.does he really think that we are that stupid?? He knew the head gasket was blown notice how Joe kept saying that the oil wasn't miilllllkkkkyyyy.key words.then have the balls to make another video of the same 4wheeler.i five it to him about work ethics and ambitious about working.but that's it . watch he want fix the stripped cam bolt he'll patch it sell it and probably buy it back again. He's only hurting himself. I will expose him.if he blocks me I'll come back again !!
@jamesobrien6855 Жыл бұрын
That must have been awkward buying a quad from a guy that bought it and only ridden it 3 times then it broke down already. I bet he took a big lose at least a grand or 1500
@ofnaguycarlwatts8602 Жыл бұрын
That's the idea and tactical practice here in the screw ppl it's all about me Gayrage!!
@reggiexp69 Жыл бұрын
@@ofnaguycarlwatts8602 buy fix resell and then buy again cheap and fix again and sell again easy money
@ofnaguycarlwatts8602 Жыл бұрын
@@reggiexp69 stepping stones of going broke in the end.nad karma want ever go away.lose everything you got and family suffers from dumbass mistakes like your comment!!
@reggiexp69 Жыл бұрын
@@ofnaguycarlwatts8602 hahah :)
@ofnaguycarlwatts8602 Жыл бұрын
@@reggiexp69 honest money goes further than dirty money from crapping ppl out of their money. If you make a bad name for yourself with customers but wanna make yourself look good on UTube that's fine!!
@Anticidal25901 Жыл бұрын
Y’all are crazy… he had this thing it looks like 11 months ago. If you think it’s only been rode for a total of 15 minutes since then, I have some nice beach front property I’ll sell ya cheap here in WV.
@bluesf150 Жыл бұрын
I got some in Arizona.😁
@billd.akaevylaz754 Жыл бұрын
I suspect the guy road it more than 15min, but I saw the videos 11 months ago. There is no way that quad should have been sent on down the road as a “fresh rebuild”. The head and water pump were just as trashed when he sold it as it is now.
@ofnaguycarlwatts8602 Жыл бұрын
@@billd.akaevylaz754 Joe doesn't realize what he is doing to himself Brother Man!!
@2vintageDeamonFan Жыл бұрын
Great video as always
@joeloyd56 Жыл бұрын
I appreciate the content.
@j.j.clingman4083 Жыл бұрын
Joe there is always someone lying about something when they are trying to sell a bad quad or bike plus you could definitely tell in his voice that he was lying about something when you would ask him questions about stuff!!! I’m pretty sure he did say that he did change the oil in it though and if you listen in the video when you was asking him questions I don’t no about you but I could tell that he was lying about something!!! Why do people have to lye about something when they are selling something???? It definitely happens every day though!!!! Awesome video and I definitely can’t weight to see it put back together when you get all the new parts!!! So you was saying that it had a new rod in it was that done before you had owned it the first time or sometime when that guy had it???
@johnhicks735 Жыл бұрын
Yes the gasket on the carburetor.,or exhaust leak to. I think it's the water pump impeller.& Loosened up rockers from the initial break in reasons alone. It's A known fact that they can loosen up from those reasons.
@connorbryan1663 Жыл бұрын
So you probably Torqued the head wrong
@ofnaguycarlwatts8602 Жыл бұрын
Not now he's Best Mechanic in the 🌎 oops parts changer NOT??
@thebigguy8306 Жыл бұрын
Love the channel, Wow great quad. The hardest-working man in Wisconsin, except for Aaron Rodgers
@BBBoooooooBBB Жыл бұрын
So that's how long a 2vintage repair will last, 3 rides...
@HI-mk7gw Жыл бұрын
Pretty long for how shitty he is wrenching, monkey with a wrench basically , always very fun to watch how sloppy he does everything
@SXSFURY Жыл бұрын
I would definitely resurface the head. But I'd say it was the head gasket for sure. And I had 2 of them heads and sold 1 a few months ago now I'm wishing i would have kept it
@badlyniceness2315 Жыл бұрын
Seems the seller was ok letting you analyze the problem without disclosure…he may have felt you had sold him a lemon…which may have been the case….anyhow..am sure you will spend whatever’s necessary…
@johnhicks735 Жыл бұрын
I'd replace the water pump impeller & key way.,or moon key way.,or just order in A new water pump for it to. That is the main issues that caused that to happen to that engine overheated from A bad water pump. Those engines are known for doing that Joe. Seriously if you replace part it'll run right again for you with no problems afterwards to.
@stevemull1673 Жыл бұрын
I think you should fix it and give it back to the guy you had over the first time.
@1damghost Жыл бұрын
thats what i was thinking. poor guy probly bout it off him for about 4500.
@LongIslandP8ntball Жыл бұрын
I second that
@davek556 Жыл бұрын
Its up for sale again!!
@derek4073 Жыл бұрын
The guy said he only rode it 3 times in a year for a total of 15 minutes bs
@allan9603 10 ай бұрын
Give it back? He'll no, the guy ran it into the ground, then put fresh oil into before Joe got there! Joe is nobody's fool.
@LucasKishta Жыл бұрын
wassup joe, keep up the good work brother
@TexasVeteranFishing Жыл бұрын
Sabo has a surfacing block. They arent too expensive. Be worth having one around the shop.
@johnnyjohnson2942 Жыл бұрын
If U let the Quad down from the right, you can control the decent with the front brake. : )
@jmendo2546 Жыл бұрын
The black valve on intake looks like it has a gap 42:12. Alway's put a straight edge on head, if there's a gap feeler gauge it
@tricksterf.5624 Жыл бұрын
Awesome new gloves joe! What is your opinion on the grease monkey gloves? I definitely like them but soon as you get oil or water on em they get slick.
@2vintage Жыл бұрын
I like them!
@ofnaguycarlwatts8602 Жыл бұрын
They are for vagina's!!
@user-fi3fx5my2s 10 ай бұрын
Guy ain't got a clue in hell about that thing...nice pick!!
@ofnaguycarlwatts8602 Жыл бұрын
I think you should patch this Quad up Again. Bring it back to the Guy .Give 2k back to him so he can ride it again for 15min breaks down AGAIN! Then he can take it to a real certified Mechanic and get it fixed properly and get some enjoyment out of it for once!! That way it'll make him forget about that pain his Butt is feeling right now.then after he enjoys it and then gets tired of it. You can give 4k for it and have great running Quad that you can enjoy Riding without having to work on it again.mahahaha.only way you going to get a good running Quad that doesn't break down after 15 minutes. After it blows head gasket you can fix it by jetting it again. But oh I forgot it's got a bad crankshaft that's what said to the Guy 😂😂😂
@garyrobinson219 Жыл бұрын
I would have ran him off when I realized he was the one I bought it from. You could tell at the end of the original video that it wasn't right.
@ofnaguycarlwatts8602 Жыл бұрын
@@garyrobinson219 I hate when ppl crapp ppl out of money!! I would of too. I probably would have rearranged body parts for him . 😂
@jayjudd6518 Жыл бұрын
Ho Lee Chit Miss Molly. How bizarre that you owned it and sold it to him. You didn’t mention the timing sight covers that were overheated needing replaced in your estimate of parts where that magnet 🧲 went on the one. I’m following this one anxiously.
@natetron7926 Жыл бұрын
Hey V2 what did you sell it to him for? And how much did you originally pay, plus what u put in to it before you sold it to him.I'm just wondering how much depreciation really happens because I'm new at this? And I don't want taken advantage of.
@robsmith1752 Жыл бұрын
Nice looking bike unfortunate situation for it but always good content
@68-72mmALKYstyle Жыл бұрын
This is why my garage is full of 2-smokes!! Gunner to ride and low maintenance. We rip em all wkend, wash em, and put em back 44:08 in the trailer so they all are ready for our next ride
@darrelltoth7527 9 ай бұрын
I don't want to come off as a hater but you sold that guy a defective quad. This quad had the exact same problem as the first time you fixed it and all the comments told you to resurface the head but you didn't. He got 3 rides and it failed, at least it looked like you learned and are doing it properly this time plus your putting it on video which most people would not do. Still a great channel with good work overall.
@MM_in_Havasu Жыл бұрын
Those new style 4-stroke engines are all throwaways, from quads to MX bikes. A shame because it's an otherwise nice machine. Thanks for the cool video!
@bubster1981 Жыл бұрын
throw it away then what?
@MM_in_Havasu Жыл бұрын
@@bubster1981 go buy a new one. They are junk.
@scraech Жыл бұрын
Check the Chain Sprocket on the Axle. When starting the machine it was moving like its loose.
@joekrebs3190 Жыл бұрын
That rattle is the clamp on the exhaust pipe
@thebigtenfarm822 Жыл бұрын
It takes onions to post this video. Reminds me of the used car places in the ghetto.
@childishbark3084 Жыл бұрын
I got a 2006 yfz450 special edition for 13 that needed a valve job. Definitely my best purchase
@jaytaylor8443 Жыл бұрын
Love a good ole oil switcharoo pre sale 😂
@kernelbadness Жыл бұрын
Always check all fluids on pre-owned equipment prior to running for any amount if time..
@johnhicks735 Жыл бұрын
Those impellers works just like A outboard boat motor does that's 2 stroke.& 4 stroke to.
@codycarlisle6748 Жыл бұрын
Crazy paid more for the second time godda love
@ofnaguycarlwatts8602 Жыл бұрын
Joe's Big word of the year!! Drum roll plz. Wait for it ? Miilllllkkkkyyyy! There I made a big word for you !! Out of milk!!
@AFellowFloridian Жыл бұрын
Millennium Technologies is a good place to send you’re heads off to. They did great work for me with a yz 250 head
@crazidirtbiker Жыл бұрын
It’s hard to tell on camera but I thought the clicking sound was actually the loose clamp rattling on the exhaust.
@user-fi3fx5my2s 4 ай бұрын
You put a bad gasket on head when you built it last time you had it... happens, no issues.
@bigmac.. Жыл бұрын
Do the head yourself..wet and dry paper 800s on a piece of glass so it's flat and bit by bit sand it flat..easy
@onecrak Жыл бұрын
Wasn't sure at first, but have come across in example of when motor turned off after running presumably hot then when turn off motor at first temp rises a little before cooling down had coolant leaking into 1 of cylinders then lose bit of coolant into cylinder but not mixing with oil, then start next day get a misfire on cold start, turn motor off then re start misfire goes away, never come across this before....
@Juniorlopez-yg1bx 10 ай бұрын
These videos are my therapy
@lloydgreen4091 Жыл бұрын
When asked a Question & someone Hesitates You know It's Not gonna be *a straight forward answer.* LOL
@ghettsumm7949 Жыл бұрын
Well. at least you saved a little $$ money on vehicle registration with the 2024 sticker 😉 Good fix Bro.
@250ozarksuziki Жыл бұрын
Ya only drove it 3 times on Sunday to church
@Canam_ds450xmx Жыл бұрын
Where did he get packing for a motoworks sr4? Asking for my ds450
@johnhicks735 Жыл бұрын
You might get lucky by just changing the impeller inside of that water pump.& The moon key way.,or just key way inside of it.
@jeffroberts532 Жыл бұрын
Well, when Vinny came out into the garage, the first place he went was to the door. I think that by doing this he was indicating where his bathroom is, which is also known as “the head”. Vinny does it again!!! 😂
@francismarion1786 Жыл бұрын
I wish I had the same negotiating skills that you do lol. I'm afraid to ask too low because a lot of people where I am are just rude. Its like well you don't know until you ask🤷♂️
@c0munguyforcaz Жыл бұрын
Beautiful quad!
@johnhicks735 Жыл бұрын
The water pump is what caused those issues with that four wheeler Joe. The impeller is worn out.,or there is A missing key way.,or moon key.,or the pump bearing is just shot out inside of that water pump altogether. Most likely it was the original one on it from the factory when it was sold new to.,or A replacement one that went bad over time to either one. It happens a lot on those types of engines though from Yamaha.& Suzuki & Honda & Polaris to all of them do it.
@billd.akaevylaz754 Жыл бұрын
Watch the videos Joe did on this quad 11 months ago. Joe replaced the water pump and it leaked on the test ride. LMAO
@ATC_RIDER_91 Жыл бұрын
As soon as I saw the thumbnail I knew that this yfz was on the channel before lol. Curious What ya sold it to him for back when you sold it
@1damghost Жыл бұрын
since the guy wanted 2900 originally i bet it was like 4500 joe sold it to him for then the guy rides it 3 times and joe says yeah i can only give you 1600.
@ofnaguycarlwatts8602 Жыл бұрын
@@1damghost joe don't realize what he is doing to himself. I've seen it many of time's. He keeps the un honesty that he's doing right now and he'll lose everything. But mommy and Daddy will bail him out.this is the future of young generation's mantality!! Some red neck will put him in his place 1 day.
@brianbiddle2456 Жыл бұрын
joe ,but he seemed like a nice ,honest boy . lol here we go again. but you did fine.
@lilspice1136 Жыл бұрын
Joe!
@LuckyYolo Жыл бұрын
hey, just wondering if somebody could answer my question. at 21:39 , the reserve gaz was blue , but at 21:59 , the ON position gaz was like yellow... why ???
@ScottAnderson-bh6fm Жыл бұрын
Maybe check the height of the aftermarket rod, you noticed the piston looked high compared to the top of the cylinder. These engines are ready to pumped up and made too light weight for longevity. The Cylinder wall is too thin. Maybe look into detune it. (Lowering compression) ? And resurface the head!
@chrislindquist2003 Жыл бұрын
Check out millennium technologies there in Wisconsin. They can fix that head, re-plate cylinders and just about everything else you could ever need.
@ViNNYDICEnice Жыл бұрын
Yeah, that place looks like the way to go
@Tomtom9401 Жыл бұрын
Wow you really sold that poor guy some shoddy work telling him it was solid, and then had the nerve to haggle over a couple hundred bucks making up some “crank noise”? Very shady bro
@bendavies9294 Жыл бұрын
It’s the jubilee clip on the exhaust making the rattling sound
@heofthesquarebum Жыл бұрын
How do you get a quad into the pickup bed using those steep ramps? It looks tricky getting the quad off the truck - I can't imagine what it takes to get it onto the truck.
@2vintage Жыл бұрын
We just lifted it up into the truck. Front wheels first and then pick up the backe end.
@dopeman420 Жыл бұрын
I have the same ramps. Just slowly drive it up, no problem...I learned fast my first time tho...I sent it a Lil too hard n shattered my rear glass on my dodge ...was 500 miles from home n had to drive home freezing my butt off! Lesson learned...I replaced the glass myself tho. Saved some $
@johnhicks735 Жыл бұрын
Have you ever thought that the water pump is bad on that four wheeler they do go out on them to Joe. It's not A normal thing though. Although they do go out.
@seeweges2954 Жыл бұрын
I have a 2005 Yamaha yz250f and it has slight backfire issues and once it’s running it leaks coolant out of the coolant overflow I did some research and people where saying it was the head gasket I was hoping it’s not that does anyone know what the issue could be. Thanks
@everythingloud4068 Жыл бұрын
I got that same 06 special edition. I'm only the second owner, but I'm selling it for a new sled
@davidcorder95 Жыл бұрын
Joe it’s crazy some girl was trying sell me one of those in great shape in Louisiana
@fernandowalker2688 Жыл бұрын
Hey man I want to upgrade my carb I got a 2012 yfz450 what carb you recommend I hear Lectron carb’s are good but there’s no videos of a Yfz with a Lectron carb
@urmomsayswhat3675 5 ай бұрын
Bummer that you didn't resurface the head the first time around. The pitting was present in the previous videos. Might have save the other guy the need to sell it back
@george31380 Жыл бұрын
Only road it 3 times my ass!😆 still got a great deal on it.
@snowfreak207 Жыл бұрын
Hey man I have a honda trx125 put new carb and does good but idles super high then dies out gotta keep it running u think it's carb or could it be something else it just takes off revs way high trying to adjust idle. Just a cheap carb from ebay
@user-fi3fx5my2s 10 ай бұрын
Did you put that head gasket in before??couldn't remember for sure but thought you rebuilt that top endwhen you had it initially. Got crap head gasket. Had a bad run on them a while back to.
@kobybear08 Жыл бұрын
Joe, you should create brand and mark in same local always for all your fix projects and let no know it's about the machine so if ever you come across your mark you might log and chart the fix 😉 so to never be bamboozled again. You do really good work Joe.
@ofnaguycarlwatts8602 Жыл бұрын
Bamboozled himself.told The guy it was the crank bad to get it cheaper.come to find out it was his own mistakes bit him in his arse!! But it wasn't a mistake he knew it was like the 1st time 😂😂😂 a real Mechanic can see Joe is scammer himself!!
@TurningWrenches-z5x Жыл бұрын
@2vintage do you only buy quads with title or also without?
@danielmartin5951 Жыл бұрын
Thats sad dude knew it was 🍼🥛🥛 an didn't man up an just let u no I knew u would figure it out one way or another when u asked him about the oil he like yea I changed it but forgot to say it's Milky keep up the great work like what u do an learn something everytime I watch
@ofnaguycarlwatts8602 Жыл бұрын
R U for real. Joe knew exactly what was wrong with it.he built engine before duh.but no it was crankshaft bad causing head to leak. Joe took advantage of that Guy.rhey both are idiots for lying to each other.jow ripped him off not 1 time but twice.parhwric is what that is on Joe's part!! Karma is a B.... Watch and see what happens to this guy
Jason Derulo
Рет қаралды 74 МЛН