The "your mom" joke caught me off guard I laughed so hard lol

Opening scene literally had me in stitches 🤣🤣🤣🤣

Watching Tyler fail to break something on purpose is pretty funny.

Holy crap man. The instructions aren't going to kill you.🤣

Car always pulled toward your Moms house I'm in tears.😂🤣🤣🤣🤣 After finishing the video and about 5 holes later Tyler is not making it to anyone's moms house🤣

Been using the cheap kit like the first one for many years now. Probably plugged hundreds of tires by now with them and never had one fail. Reeming the hole is by far the most difficult part and if not done properly getting the plug in is next to impossible. My advice, keep the tire pressurized during the entire process so that it is not mushy and it will be much easier. If you are in the lucky situation of being at home and doing a plug, use a drill to reem the hole. Get a bit ever so slightly smaller than that reeming tool and drill the hole out. In a pinch, the given tool will work but it is far from ideal.

Once upon a time, the only kind of plug kit was like your first one and they worked just fine, I used them for decades.

Old school orange worms are the best. They are cheap, effective, and permanent no matter what people say. You just need to learn how to plug a tire . Cant to it when it's flat. I've been using them for decades.

I love how tyler rates products based solely on his incompetent attempts of using it the wrong way

The opening line killed me 😅 "One half of the tire is bald because my car for some reason pulls towards your moms house"

Tyler the mom comment took me tf out i love you so much 🤣🥰

The lubricant/vaseline looking stuff is for the remer, so it goes in and out of the tire easier, not on the plug.

I've been using those first plugs for years and years. As long as you ream it nicely and get both sides in and the pull is satisfactory.. that plug will last the life of the tire. I've gone 50k+ miles on a brand new tire that got a nail quickly. They really are quite good. Edit - Oh Tyler.. Come on man. Haven't you used those plugs before? I think you need to revisit this immediately after learning how to plug a tire. Those plugs are absolutely the best. This is one of the first times I had to say something and you usually do the due diligence.

Ofcourse he is going to try and get those plugs in with a flat tire first 😂😂😂

Might be helpful to see if the little plastic screw holds up under driving conditions

Next time use a drill bit the same diameter as reamer and run it in and out the hole the purpose of the reamer is to make the hole bigger so the plug can go in I don't think it was the cheap tool kits fault I think it was more like operator error

“I’ve plugged a lot of tires in my life” *YEAH. OKAY BUDDY* 🤣🤣🤣

Tyler, your mom said leave some air in the tire next time.

I carry the blackjack kit with co2 inflators and an extra pack of Harbor Freight traditional plug kits with rubber cement. I've used them often for my own cars as a field service guy and to help others on the road with theirs. Never had a failure.

PUT SOME AIR! IT HELPS WHEN YOU TRY TO PLUG IT...

As someone who has plugged thousands of tires and currently has a plug or maybe 2 in almost every tire of my f250 work truck, its absolutely hilarious watching someone try to plig a tire when they have zero clue what their doing...😅😅😅. Plugging a tire is simple and no matter what lies ppl say they are permanent. I have tires that wemt slick on my trailer that still have plugs in them from when i forst got them.

And tyler does not have his plugger ready before he reams... what a goof

Has Tyler ever considered reading instructions? 😂😂😂

I would recommend doing this test again particularly with the first item but instead of having the tire on your table you should put it on your car. Having the tire on the car and in contact with the ground will create back pressure making it easier to stick the tire repair to in.

Lmao pull towards your moms was easily the best thing he’s said all year saving the best for last I see 🤣

I have the slime version of the rope style. Its the only proper temporary plug. I also also carry a tub of rubber cement that I coat the rope in before installing. Ive had to use it in the past and its worked great

Only a few minutes in so far. As a delivery driver i got real efficient using them . Step one get the pump on and going and keep it going. Squashy tyres make hard work. Also maintains the Tyre bead seal. Put snotty glue on the reamer to lube the hole. And the strip to make threading faster. . Shove it in. Twist and a half and yank it out like your starting Grandad's old lawnmower . Snip the end off leaving 1/3 to 1/2 inch sticking out. Then check the pressure ,and make it match the opposite ture. Also works on sidewall damage , however it's a bit naughty.

The tyre needs air in it to work the best 😂

LOL, I currently have a plug from that first kit in my tire from 2 years ago. It's still fine. You have to get everything ready BEFORE you remove the puncture and start losing air pressure. I will usually drive to a place with an airpump so I can get the pressure up first. You can't just get that thing in on a fully flat tire, but if done right, pulled out quickly, it will last as long as your tire.

This guy could make eating a slice of pie look difficult. The first plug he tested works just fine. I've probably installed thousands of them. 😂

Yes finally more diy car videos, they became one of my favourite videos

Ok the Your Mom joke completely caught me by surprise and I actually laughed out loud.

Lmfao. Rt off the get go hits the mom jokes...gotta love it...😅😅😅

'uses every tool the wrong way' Tyler: these all suck. XD

U struck a like literally the moment that mom joke left your mouth. So unexpected, yet so 90s. Love it!!!

Happy holidays and u made my Christmas slightly better Tyler ❤️

I keep the screw in ones in the tool kit in all my cars. Works great with a decent screwdriver. They have multiple sized plugs for different holes too.

I have used the firdt tire kit with no problem. I have one of those plugs in a tire and never got it pro repaired. The screw one will not last.

Quick tip from someone who has worked at many tire shops, aside from plugs are only for temporary use to get you to a tire shop so they can do an internal patch. Next time leave the bolt in until you are ready with the reamer and also lube the reamer with tire lube or dish soap, lube is your best friend even outside of the bedroom 🤣

LOOOL that aggressively funny beginning though 😂😭

Starting our fresh with the mechanic humorous diss, love it

Tyler, the opening killed me but just go get an alignment 😂

Tyler roasted everyone of us in his opening statement 🤣🤣🤣🤣

That intro makes the water came out of my nose 😂 like dayuuum 😂 next time I won't drink water after the intro 😂

Well for starters, using those to put a plug in, you need the tire to have air in it, so that was your 1st mistake. Having the tire on the table is the 2nd mistake, it is 100% easier on the floor which you could have set up with the camera lower to start with. Not throwing punches, just some info if you ever do this one again. P.S. Those who will comment about having the air in the tire, pump it up WHILE the nail or object is still in the tire, have the tools ready, pull said object out and reem it, have the plug tool loaded and ready, then insert it.

Merry Christmas Tyler always enjoy your videos regardless of what happens during

Gyat daamn Tyler came out swingin

Are you going to use that vaseline at my "Mom's" 😂😂

😂That intro. I love it!!!

“Pulls towards your moms house” had me dead 💀

Love the video man, keep it up!

I believe this was the quickest I’ve ever liked a video, the mom joke was beautiful 😂😂

I’ve gotten that first repair kit before and didn’t have any of these problems 😂

Lol. Thought he was gonna say it pulls to the left... But nope. My mom's house. Nice. 😂

As someone who works for roadside assistance and does this stuff multiple times daily. This is funny af. The reemer is to enlarge the hole to clear debris and to make the hole bigger so the patch can be accepted. The goop or rubber solvent use as much as u want bro xD.

I use those screw in plugs all the time in my job as an Amazon delivery driver and maintenance person. They more than do their job to help keep the delivery vans on the road. Sorry that I'm so late commenting on this one, but I was on a much needed vacation.

I was literally hollering at the TV “use a drill bit” 😂

the mom insult was so uncalled for but im loving it

Tyler, you never disappoint me! Lmao! Just now saw your Chanel discription and looked at my clock.. And yeah… you’re indeed correct; I am most certainly watching at 3AM. It’s like a routine man! :D keep up the great content my dude!

ohhhhhhh that intro was funny af hahaaaa

MERRY CHRISTMAS TY!!!

I hope someone buys you safety glasses for Xmas Tyler. Happy holidays mate 👍😎🇦🇺

1:45 so you sussed it out I guess 🤣🤣🤣🤣

You, Sir, are hilarious! 😂

Happy Halladay's Tyler

I have that same reemer from a walmart plug kit. I dont know where i got it but ive been working at a dealership for 9 years and its never broke. I always lube it before reeming

I think that tire is so old and hard that the first kit just couldn't hold up. I love this channel!

😂 bro the struggle is real. Stay awesome

I feel the struggle with the tire patch kits that have the little strips of like gelatinous rubber material. During high school I took autoshop and we learned how to use those patches in an emergency situation. I feel for you Tyler

I use those for my atv and have hade some very large cuts and holes and the standard plug allows you to use multiple if needed in the same hole on low load and low pressure off road tires.

What a classy start of the video.

Watching him try to hammer a nail into that rubber tire was some of the funniest footage of the week 😂

I love the first part got me.. you could use a normal brill bit. To ring the hold an then up the plug works great 👌

Yes the goop also goes in the reamer helps the second step go more smoothly but you have to go fast.

the moms house joke took me tf out lmaooo

"Have I used one of these and drove thousands of miles. Of course." That's the Tyler I know! Good vid man!

gates of hell opening up as tyler tortures the tire 16:39

Caught me off guard with that opener🤣🤣🤣🤣

I never expected Tyler to come out with a mom joke.

I have had that same first plug kit for over 10 years. Its plugged multiple truck and car tires even semi truck tires. Never had an issue or failure. Super easy to use... with common sense.

Lmfao I came for the fails but subbed for the "yo mama" jokes.

The opening scene, chef’s kiss👌🏾😂

Screw the reamer in then pull out a couple of times to open the puncher hole pretty simple but you are you I guess!

OMG !!! These are great !! i can say that i have used these for 30 years, Starting with a piece of leather string off my baseball glove and a Philips screwdriver 30 years ago with a dab of motor oil to put it in my truck tire it held strong for 11 months !!! then i got these kits same concept they work great if you know what the hell your doing.

I refuse to believe this man has ever plugged a tire.

Its me 12 bears deep holy crap that your mom joke was hilarious lmao

"Your moms house" was classic, well-done sir!

Today is my birthday, and I have been binge watching your videos ALLLLLL DAY LONG!!!!! 😂😂😂 What a great day!

Not even 30 seconds in and Tyler is roasting us again :)

I’ve used the first one countless times as a service truck driver. You needed to have some air in the tire so it’s not just caving in. Also not sure how you broke that I’ve never had any issues 😂 good video though keep it up

I like the your mom joke at the beginning

I'm reasonably sure Tyler's on-screen persona is just that, an on-screen persona. Off screen, I bet he likes pickles, can cook well, and reads instructions and can do these things well. He has just found a formula that works. I know another guy who no longer makes videos that was the same way. I knew him in person and his on-screen personality was the opposite of his off-screen.

this is gonna be gold, not easy to use those kits

My side by side has a few holes in the tires from railroad spikes that have 5 or 6 plugs in each hole, sometimes takes a couple tries when you need 2+ plugs in 1 hole but those cheap kits really do work, a couple of em are like 3 years old and still holding through mud and rocks and prolly 400 miles lol.

Funny and informative. TY

My tires are mostly patches and plugs, I got good at it, but your troubles come from the hole not getting the reamer to make the hole big. Then use a lot of rubber cement!

I put MY safety squints on as soon as I seen that you did😂. really gotta wear safety glasses my guy. 👍

Now I could be wrong but the first tool u use to puncture the hole after removing a nail or whatever. Your suppose to use that liquid stuff which u was putting on the rubber strip to fill the hole, your suppose to use it on the first hole as it acts as a lube to slide in and out of the hole until it’s smooth and then u put a bit more on the second tool to fill hole on the metal piece and push in and of course twist and pull out and only left with the tool. The liquid paste is a lube so it’s easier to slide in and out of hole or u will struggle but it’s always hard the first few times pushing in and out but your meant to go all the way through and not half way. I could be wrong but just learnt through a little experience. Other than that your content is pretty good and keep up the good work. Hope this advice helps.

Thanks for entertaining my ADHD, Merry Christmas Tyler 😎

The your mums house thing was brilliant 😂🍻