*Invention used a 1.5V battery to unlock every type of locks you should know* kzfaq.info/get/bejne/nKulZ9aEnJuaf40.htmlsi=DoIiV5fE6-VneNrI

The only way to move water through a pipe is to either push water into it with a pump, use an Archimedes' screw, bubble air into the vertical pipe or make a siphon. The siphon is the only true no power way to move water. The only way a siphon can work is if the outlet is lower than the inlet. Gravity pulls the water to it's lowest point, creating a suction at the inlet. This is 100% fake. Replacing the rubber seal with a Schrader valve is the easiest way to fake this. If an air line is connected to the Schrader valve, the rising air will lift the water up the pipe and out the exit. I think there are either some clever video cuts where the air hose is hooked up and placed in the water or the check valve has been further modified to allow a hidden hookup under water with a push on fitting. There will be thousands of people who will pass the video around showing the "magic" water pump. The author will get his views and possibly $ for advertising. People don't know anymore that the seemingly impossible videos are almost always faked. Like the guys that build seemingly impossible homes in the jungle dirt - pictures surfaced of heavy construction equipment tracks when it was supposed to be done by hand. If you see it on social media - there is probably a 30% chance it's fake.

In the first 20 seconds he shows you his 'siphon' begins working without priming. There is a battery operated pump. The alteration to the check-valve is totally useless also.

You don't need the bicycle inner tube schrader valve inside the check valve. In fact, you don't need the check valve at all. Or any particular configuration of pipe. Just properly align the end of the pipe with the outlet of the hidden underwater fountain pump and presto!

"Next, I shall power my home by plugging the extension cord into itself!"

If physics worked like this... all the P-Traps in my house would be spewing water out of my sinks and toilets.

If this was even possible it would be done world wide.

Next he'll build a Space station with bamboo 😂

I can hear the pump running around the 7:00 mark when he takes it out and reinserts it into the water

That battery operated submersible pump in the foot valve makes the shaking motion work better.

Sir, can you also make a video of how to build a Nuclear Reactor with PVC pipe? You'll get more views from that.

Okay I'll admit it, I got excited for a second. I really wanted it to make sense because I was already building my energy producing perpetual motion machine. I'm very open minded that if somebody ever figures out a way to do it, it will probably be in a way that in hindsight should have been obvious to us because it will be a very simple principle, like water crawling up a sponge.

It's a one way valve at the end in red, which he hand forces water into a simple gravity siphon caused by the bends in the pipe ... why are people naysaying this??? It's basic flow dynamics!!

In 6.53 to 7 minutes on the video you can hear a small pump sound inside that pvc listen carefully 😂😂😂 all of his video’s are fake don’t try to make those

Fake , it should be a water pump in theree

Finally, a video to 'disprove' Bernoulli's and energy equation which I learned in Fluid Mechanics and Hydraulic Engineering. The piping must have negative head loss or the system is creating energy for this to work 😂😂

what kind of check valve is that? where do you get one?

There is no way that water can go up with just having a u turn pipe.You can bring up water by siphoning provided the outlet is much lower than the source of water.Siphoning work in a way that once the water goes out on the outlet it tend to suck up the water because of gravity or the suction pressure created by continous flow to the lower section.iniatialy a water is place on the opposite side of the pipe that will act as the one suctioning the water from the source going to other side of the pipe whose end part is lower than the water source.

How long does the battery last on the hidden pump inside your pipe?

I love his disinginuity, sorry I got confounded. I love his dishonesty and ingenuity. I love when people figure out how to change the laws of physics, very impressive

FREE ENERGY! This guy just saved the planet!! Imagine millions of these powering generators all around the world doing nothing but moving water from one pond to another, then back!

There is a motor insaid tube, it is continue runing when this tube empty you hear the sound of motor than sound will stop

No way this is real. One of those pipe sections has to have a battery-powered pump and battery inside it. Or maybe that part of Asia is not subject to the laws of physics.

Same principle as siphoning. The red contraption below is a non-return value. Once the pipe is filled with water and flows, then it'll be free flowing.

The very steady flow of the water proves this pump is powered either by electricity, gas engine, or otherwise a windmill on a very windy day. You'll be needing a new tire tube for your bicycle. Do what I did and use a broom handle in place of the tire tube! Don't worry... the broom handle will bend into the shape of a tire tube. Kidding. Just sticking it to you like you stuck it to all of us. 🤣

A bomba e a bateria estão montados dentro do tubo e ele chega com a bomba ligada fazendo o barulho característico desse tipo de bomba quando está sem água. Ele bombeia com a mão até a água cobrir a bomba, que é quando a bomba começa a puxar a água e então pára de fazer barulho.

It takes work to elevate water from a standing pond. Without energy from some source to create the force behind that work is pardon the pun "a pipe dream".

For the comments saying there is a pump...have you seriously never seen a pool drained with a garden hose? Anyway... The check valve allows you to prime it in those first few pumps. But I honestly don't know what the valve stem was for....the check valve was fine how it was.

Impossible that tiny Bicycle air inlet could produce such large volume of water...genius magician...

That would be a perpetual motion machine if it really worked.

This device cannot work in still water. Note at 11:25 there is a big hole on the left where water flows into the pond. Note the water turbulence too. The water could be directed towards the pipe via the red check valve.

I was thinking of this idea myself - I live on a lake and thought: can't I put a pvc pipe down into the water and the pressure of all that water in the lake should push the water thru the pipe, even upwards above the level of the lake. then I could have it flowing onto a water wheel to turn and create free energy. Or also do what this guy is doing and get flowing water without needing an electric water pump. Pretty smart.I do see that everyone says this is fake - okay I'll make one myself and try it out and see & get back to you with the results.

I could actually see this working a little is the outlet opening craned down and wasn't aimed straight out. Seems a little too easy for the air to enter and the vacuum to break and the flow to stop. certainly not enough to squirt out of the hose like that. My vote is that there's more going on here.

Note, the initial siphon pipe is equal the the other, but once it is carried to the pond it is almost five feet long. Does PVC grow in that country? Fraud. there must be a pump in the pipe. Show us the inner of pipe before placing it in the pond and then reassemble on spot, there was no glue needed.

I feel like my knowledge in physics is totally gone wrong and gravity doesn't exist

I'm trying to make this, could you please tell me what sort of pump you have in there? And where do you hide the battery?

You can use a ram pump for no power but it uses gravity and is very inefficient

Mine works so mush better if I huff the glue instead of wasting it on the fittings. Side note, abs is a lot easier on the nostrils, and it has a sweet smell. You won't need any purple primer...

You could've actually made one of those cool gravity pumps that use no electricity and be a hero but you're less than zero

Couldn't help but notice him building a small version of what he brought down to the stream. Not sure what the point was in doing that but it's much smaller. I'm also trying to figure out how the tire valve would be used considering it wouldn't let any water up from below without being compressed.

After this video I went outside and made the same thing and filled up a bucket with water. The bucket immediately started climbing a wall.

Nice magic trick, he should try it out on the show "Penn and Teller: Fool Us". 😉 At a depth in water of six feet the pressure is about 2.6 psi (gauge). This is nowhere near the 30 psi he says the Schrader valve needs. You could make a perpetual motion machine by using the falling water to drive a waterwheel and letting the water return to the source. A perpetual motion machine channel on KZfaq is a perpetual cash flow machine. It would be interesting to know how many there are.

You solved all human kind's problems! Just put a water mill at the end and produce free electricity from the sea. Give this boy a Nobel prize!!!

Hey. This guy's a genius. He has all kinds of experts arguing and commenting while he's laughing all the way to the bank. Mission accomplished.

No water will flow up in a pipe unless mechanically assisted. It does not matter what specification or pipe measurements are used. Pumping at that flow and constant pressure, endless. Built the exact model, did not work. BS.

His Dads the perpetual motion machine guy 🤣

This pump works on the 'Hydraulics-Views' principle. First, assemble random pieces of borrowed PVC into a non-functioning siphon, and get it to pump water through jump cuts and a hidden, borrowed electric pump. Second, make a video demonstrating this mysterious, previously-unknown principle of fluid mechanics, which generates millions of views. Third, take the revenue from the video, pay off the borrowed parts, and purchase clean bottled water indefinitely.

If it was ram pump then you would hear the ram slamming or see flow rate being rammed and pumped, not a continuous flow. And its not siphoning.

Total bull crap, against all laws of physics. From the time he put the pipes together before you walked into the grass we did not see him and that is when he installed a small pump battery powered inside the pipe. The check valve lets him sloshing it back and forth in the water allowed him to prime the pipe up to where the pump takes over.. not only that but when he was putting the smaller half inch or 3/4 pipe to extend it up The Big unit he was fighting pressure. The rest assured there is no magic here, only a pump installed inside the pipe well the cameras weren't on him. It amazes me how many people are falling for this 🙄 👎🏻

Im waiting for his wine to water tutorial

No this is called a RAM Pump, and it is fed by Gravity, it may actually work, I will experiment with it more to find out. It would be neat if we could somehow make this work and then have the water fall on a water wheel which could spin up a small turbine to make power. IDK.. Just my thoughts on it. THe more water we could get to flow, the more power we could put into our water wheel and if we could get our water wheel to have enough power we could gear it up to a generator and make the generator spin at a faster rate, then it would be free Electricity. Or theoretically, I forsee a lot of issues with this though. I will experiment with it see what we can come up with.

Wow your pvc made water defy physics! Amazing! 🥴

I bet he cant do the same with transparent pipes.

(Let's not be naive. The laws of physics do not allow water to rise.) (Não sejamos ingênuos. As leis da física não permitem que a água suba.)

I guess the trick is to apply zero point energy twice, to obtain negative gravity - using only PVC pipes an a scrader valve! That is unbelievably clever! I wonder if the same logic can be used to reverse other forces as well? Negative friction could be useful in many applications. Negative entropy comes second in my wish list, followed by selectively negated laws of biophysical attraction I hope you don't mind if I base my research in these fields on your methods. (My first thought is to change the schrader valve to a presta valve, as my experience indicate that presta is superior to schrader in many ways.)

Love wveryone comment but this is basic syphon principles ram pump yea kinda also but the main force is generated from the water drop that creates air which in turn forces water up the pipe once the water has start water can be build like you see he put the reduce to increase the pressure if he does a double drop then more pressure

Почему выбран именно такой большой диаметр трубы? Потому что туда легко можно спрятать маленький насос и аккумулятор ))

Tout simplement impossible !! C'est de la physique. Merci pour ce joli Fake !

Water is pulled up by moving the pipe in and out motion using the check valve I get it. How does it continue to pull water out of the pond higher than the pond level? Gravity doesn’t allow it. Unless there is a pump of sorts.

And for my next trick Mom Dad we have running water! It looks like he stuck it over a natural spring in the ground. That's pretty good for having no leaks and nothing is glued.

Definitely works! 😁👌 I have 2 bathtubs installed 1 above the other. I use that "magic pump" to lift the water into the top tub. Then I let the water drain out of the top tub, through a mini turbine to generate electricity, then back into the bottom tub to start the whole process over again 👨‍🏫 I've stopped paying for electricity and even started selling the excess electricity to my neighbors 💵 My next project is creating a water powered car that uses the same principle 🚙 I should be able to finance everything with all the money I'll be making from selling electricity! And for my final project! I'm gonna turn cow manure into gold bricks! 😂🤣

I watched till the end, and I am amazed. Mine won't work though. I don't think my inner tube was broken enough. But hey, almost 1,000,000 views and nearly 600,000 subscribers. Not to mention over 1000 comments (plus replies). Money in the bank!

He just showed you guys how it worked. He even moved it from one place down to another and the second place he moved into was in the dirt mud because it brought up black mud for a while. There is a lot of people that are going to want to shut this down. You be able to think outside the box. I have seen a turbine work to create electricity with with moving water . Hell the Filipinos make it all the time. They are bad ass at creating their own electricity. Of course you got to have fast running water. I don’t know how what this guy just did would benefit me at all. Maybe it would help make a water wheel turn. Especially leaving off that long thin piece of PVC that slow the water pressure down . I don’t know it looks like a clever idea. I couldn’t believe that the Filipinos can get electricity from running water and they damn sure did it. can work too somehow, like I was saying a water will making it turn. It’s all learning experience .

What are the odds of the nub of the Flux capacitor bumping the recessed tip of the Schrader valve bouncing around wildly around inside the red cage? Somewhere between 88 miles and hour and 1.21 Gigawatts, that's only if the Libayns didn't get there first.

C'est vraiment génial comme invention. Bravo. C'est la plus simple Merci de ce vedio unique.

could not get in mind, why the cycle valve was fitted, what is its function, the cycle valve works minimum 100 PSI, depends upon the inner pressure, the one way water valve can work through suction by vacuum basis. Finally looks great for the people who could not understand mechanism not for the people who know how things works.

KZfaq constantly posting anti-mis information ads... Meanwhile KZfaq promoting misinformation...👏👏👏 Nice work KZfaq.

Totally credible, this is in the Southern Hemisphere so water will always want to drain to the Northern Hemisphere. Otherwise we wouldnt have tides in the ocean. :)😁

There are two things missing in the list, after assembled this .its seems 3nos 60mm 90° bends & 2 nos 3 feet 60mm pipe lenth.

You can see the vibration of the water, due to the pump installed in the pipe when the camera was off.

Yes, at 6:10 he brings the pipe to the spot accompanied by high pitch sound like cicada and then the sound changes depending the pipe is handled, the assembly is evidently heavier the way he is handling it to be just empty pipe, once water in pipe-the sound is muffled by the water. It's a con-man folks.

Notice in the beginning he's showing you the insides of the small pipes... The big one doesn't get a clear shot through it as that's the one that has the pump. The check valve is used to prime the pump, without that it wouldn't work. Next video please.

There is one tube not addressed in the measurements, it is attached to the Valve and the V120. How long is that I know I didn't miss it, went back and looked twice? LOL.

I'd have to see it with my own eyes. That defys the laws of physics and the laws of gravity.

It defies the law of gravity. No way it's going to work. Give the boy a credit for a good show and setup.

No way! He's got to have a submersible pump hiding under there. There's not enough current to move a RAM pump that hard

This guy must be given the PhD award. Newton is laughing in the grave.

Many are making snobbish negative comments. I don't know if this is real or not however instead of you all telling us how clever you are why not prove this guy wrong (or not) by making one and testing it? It's not hard.

I think all the negative reviews really are not necessary as I built this and now have free gas feeding my home !!! And the only problem is the sediment which turns into gold every two days 🫤. If i forget to clean the system I end up with diamonds. Please take note and keep clean. God bless each of you. ❤

Thank you for sharing a good video or it can be done. Wishing your channel fast and strong

J'ai étudié l'art des fontainiers depuis l'antiquité, cette vidéo est une tromperie, il ya une pompe cachée à l'intérieur. Il s'est inspiré visiblement du bélier hydraulique mais c'est impossible à mettre en œuvre chez lui.

Newsome has signed a new tax bill to buy a bunch of these for California to pump out Tulare Lake.

Bom isso não se faz, não tem como funcionar 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

This is one of these thousands of videos on youtube where the publishers only chase the number of views for financial gain. Although these are all hoaxes, what I cannot understand is why would you risk your good name and honour to post videos like this - and I have not specifically chosen this video to say this. It is just impossible to comment on all the BS videos out there.

It's common sense the down slop is 1/4 of the up slop. It physically doesn't have enough energy to pull the water up. And his red valve just holds the water from going back

People don’t understand what a check valve does which is why he is moving it back and forth in the water. They make gasoline siphon hoses with the same valves and I use them all the time to transfer diesel from a tank to buckets for excavators.

So incredible how u hide the mini pump

Sorry mate - water cannot siphon uphill, no matter how you bend the pipes. It has to end up lower than it started.

The laws of physics don't apply when you're scamming people.

ليس من الطبيعي ان يرتفع الماء من مستوى ادنى لمستوى اعلى بواسطة صمام القدم،،ممكن شرح نفس الفيديو بواسطة سطل ماء وليس نهر. حتى يكون اكثر وضوح وعدم اللبس في الموضوع وانني من متابعيك من اهل العراق...لديك افكار من كوكب اخر...ان صح ذلك فبلتوفيق..والنجاح لك..

Never possible....... If it happens all the motor pump company will close.... Isn't it...

A pump that small wont even able to produce enough pressure to push water up 120°. Not to mention power to pump water out like that. Such genius. What planet gravity u had over there?????

I would like to find that EXACT valve, and, exact dimensions, and see if that actually works... I have heard that standard water heaters can drain through the top, and may have experienced that phenomenon myself based on replacing an element just now that looked like it burned in an empty tank... element burned up and looked like it almost melted.. Looked like a bananna, but, I know it was never turned on, not full of water, unless it drained by itself somehow, not from the bottom of the tank.. Would be cool if someone who had access to that exact valve built one of these.. I have my doubts about a lot of stuff I see on here, but, can't say it won't work for certain, without trying it.

I'd have to inspect the PVC to believe it.

Спасибо автор, сделал такую же. Уже все озеро перекачал себе в бассейн! Колодец сделал, даже нефть добываю!

That was clever work of you did good job on that now at other end you can put fish in it if it becomes river and turtles etc to keep them from being endanger

Excellent video and demonstration. Thank you very much. 👍😁❤️😇

As a Millwright/Industrial Mechanic that’s worked with pumps for over 20 years. I can tell you that this absolutely works. The Schrader valve is nothing more than a stop. To fill the hole of the one-way check valve. The water is then allowed to move through the strainer filling the pipe to the top of the drop. When the pipe is full to the top of the discharge it has built up suction (displacement) to carry the water out of the pipe. As the water leaves the pipe, it creates suction. The suction causes the water to be drawn in again to the one-way check valve filling the drop and discharging the water. This is a great way to move water across flat areas or a minor uphill slope. There isn’t enough head pressure built up to move water uphill but this will work.

can you make a playlist for powerless designs ?

Any of you ever drained water bed? I have several. I don't know about the priming of the start of the flow, but I know that once you get water flowing it will continue. His u in pipe helps prevent air breaking the siphon of the water. Before we claim fake or real. Try it. IF YOU NEED IT! I don't need.