I upgraded ROKR marble run set with a 12V motor + speed controller

No video

I upgraded ROKR marble run set with a 12V motor + speed controller

Рет қаралды 1,552

Күн бұрын

#marblerun #rokr #diy #modification
Since the existing motor on the ROKR/‪@Robotime‬ marble run link pack was struggling and was too slow, I had decided to upgrade it and modify the kit by replacing the motor and adding a speed controller with a switch.
In this video I will walk you through on how I have done it and what is the best motor you can use to achieve that ultimate speed and power.
It is also entirely up to you if you would like the motor to be plugged into mains or use a 9V battery of which I believe would be perfectly enough for most people here.
You will see at the end of the video how well it all is running and what difference does that speed and power makes.
Here is the list of the items I had used in the video and I have also added 9V batteries and the 9V battery covers. And all of these items are from Amazon and i have 2 lists, 1 for the UK and one for the USA Amazon.
USA Amazon list:
Motor: amzn.to/3Y2u1nk
Speed controller: amzn.to/3zzcnxH
9V Battery: amzn.to/45WsL7c
Battery connector: amzn.to/3Lj0wGm
UK Amazon list:
Motor: amzn.to/45Vd1RX
Speed controller: amzn.to/3xFnjJw
9V Battery: amzn.to/4cVJhXH
Battery connector: amzn.to/3xQja5y
And I hope you enjoy this modification video and please be sure to leave a like below and check out ROKR wooden assembly kits here: shareasale.com... ⚙️
And Subscribe for more video like this one and for wooden and metal assembly videos here: / @martinsassemblyhaven 🔔

Пікірлер: 58

@MartinsAssemblyHaven Ай бұрын

I hope you enjoyed this modification and please leave a like above 🙂 And make sure you use this link to check out ROKR kits: shareasale.com/r.cfm?b=1707320&u=4069976&m=106192&urllink=&afftrack= ⚙️ And you can also find the full list of items I have used in the video description including UK and USA Amazon links and best of luck if you are attempting to do your own modifications 🤞⚙️

@RCBirds Ай бұрын

Thanks for showing. It was a great inspiration for me. I should've some components for the customization down in my cellar.

@MartinsAssemblyHaven Ай бұрын

You are more than welcome and I’m glad to hear that 😊 That’s even better and I hope it all works out well for you 🤞 I’d love to know how it all goes once you’ve completed the modifications.

@RCBirds Ай бұрын

@@MartinsAssemblyHaven for sure. The port's done. Now the coupling kit'll done the next weeks.

@MartinsAssemblyHaven Ай бұрын

That’s brilliant 👌

@66lwmorgan 28 күн бұрын

I watched your video with the standard motor and you said it was way to slow but it did work. Wouldn't the weight of the steel balls still fall into place as they move around and work like it's supposed to even though the gears run a little slower. Honestly I don't see how the gears spinning faster would make it run any smoother. I'm still waiting for the addon kit to arrive and I will definitely be watching your video's during the build. I'm not sure I'm smart enough to modify the kit like you are doing so I may be stuck with original pieces when I get started. One thing for sure, you just got a new sub, I appreciate the time you take explaining what you are doing and hoe to do it.

@MartinsAssemblyHaven 28 күн бұрын

Hey, thank you for watching it and thank you very much for the Sub, it’s much appreciated 😊 So the existing motor does work, but it is far too slow and it takes ages for the steel balls to travel up and then go down, and to make the gears and the whole run smoother I had to align bits and also superglue some pieces in place to stop them from moving or displacing themselves and I also waxed everything really well and honestly it runs amazing now and is very smooth 😃 And I hope you enjoy the build once you get the kit and you do t necessary have to modify it if you’re happy with the speed and power it produces 😊

@alanbrill7148 Ай бұрын

Great work. I tried your links to order the parts through those links. But the motor shows as unavailable for US addresses. Perhaps because you link to Amazon Uk. Any chance you can provide links that will help you and be available in the US? Thanks and best regards!

@MartinsAssemblyHaven Ай бұрын

Hey Alan. Thank you very much 😊 Ohh I see, that’s a shame but yeah I’ll have a look and I’ll let you know.

@MartinsAssemblyHaven Ай бұрын

Does this link work? amzn.to/3Y2u1nk

@alanbrill7148 Ай бұрын

@@MartinsAssemblyHaven: Good morning, Martin, from New York City. It works great. Could you find an equivalent link for the speed controller. I have 9 volt batteries, battery clips and, I think, a mains plug-in that can provide 12V DC. Best reards and thanks again!

@MartinsAssemblyHaven Ай бұрын

Good morning Alan 😊 Oohh wow all the way from New York, that’s awesome 🤩 I’d love to go there for Christmas one day 🎄 Anyways, I’m glad that link worked and here the speed controller: amzn.to/3zzcnxH 😊

@66lwmorgan 23 күн бұрын

Another quick question Martin, can you get away with just the upgrade motor or do you have to have the speed controller as well? Sorry for all the questions but I thank you for all answers.

@MartinsAssemblyHaven 23 күн бұрын

No no don’t you be sorry, just ask whenever you need to 😊 And that really depends on what type of motor you are using. If the motor has high RPM and is like a 9V-12v motor then you might need it because once you attach it to power, it might go really fast/too fast. So you’d need to find that perfect motor speed really that doesn’t need to have its speed controlled.

@GameplayHero658 Ай бұрын

Very well done my friend, it runs so good and fast. Thank you for sharing it, it gives me good ideas about what to do now with my kit

@MartinsAssemblyHaven Ай бұрын

Thank you so much for that, it’s really appreciated and I’m really glad you enjoyed it and found it helpful 😊 Fingers crossed your one works well once completed and don’t forget to share it ⚙️

@GameplayHero658 Ай бұрын

@@MartinsAssemblyHaven Thanks and I will. Keep up the good work Martin

@MartinsAssemblyHaven Ай бұрын

Thank you very much and I will indeed 😊

@shanedunn4870 Ай бұрын

Great help but a little more if i may be so bold… i am yet to build my spaceport but was interested in you mention of a modification to stop two balls from entering… how will i know if i have the modified version? What does the part look like?

@MartinsAssemblyHaven Ай бұрын

Hey Shane, thank you very much 😊 So from what I’ve seen, it looks like it’s literally the last step or shall I say extra step right at the end of the instructions. Have you opened up the box already and looked at the instructions?

@shanedunn4870 Ай бұрын

@@MartinsAssemblyHaven not yet no. I am waiting on the linking part and looking at your modification to see if I can incorporate it into the build rather that add after 🤷

@MartinsAssemblyHaven Ай бұрын

If you have a look that would be great as I’d also like to know if you have e that extra small piece right at the end 😊 And that’s not a bad idea, but I can’t advise unfortunately on how to do it without attaching everything first, but I hope it all goes well once you’re doing it 🤞

@shanedunn4870 Ай бұрын

@@MartinsAssemblyHaven so do I 🤣. I shall open them and look, how can I send you an image? Also what are the dimensions of your piece of wood, height and width please?

@shanedunn4870 Ай бұрын

Cannot see anything in the instructions that looks like a mod, final pictures are of the motor instal.

@user-gz5wz5xv6e Ай бұрын

Love You videovs. The spaceport, got got the same problem, too slow and don’t run smooth. Where did you buy the better and faster motor?

@MartinsAssemblyHaven Ай бұрын

Hey, that’s brilliant and I’m really glad you like them 😊 I got it on Amazon, I’ve got the USA Amazon link here: amzn.to/3Y2u1nk And the UK one here: amzn.to/45Vd1RX But remember if you do get this motor, you will have to do the modifications to the kit 😊

@ramonestrany8856 22 күн бұрын

Dear Martins, I have a question, and please excuse my English, but I understand that if you change the engine, the USB sockets will only work for the lights? And the ignition button doesn't work? Is that right? Thanks.

@MartinsAssemblyHaven 22 күн бұрын

Hey Ramon, don’t you worry your English is perfect 😊 And yes you are correct. The button still works but it can only turn on and off the LED lights. And motor is powered separately 😊

@Agra-xe9oc Ай бұрын

Great idea! One question, if you don't mind, what motor did you use? 400 RPM? 100 RPM? thanks

@MartinsAssemblyHaven Ай бұрын

Thank you very much 😊 It’s a 400 RPM motor, and just make sure it’s high torque as well 😊

@ASMRBrainiac Ай бұрын

Great work Martin! Can I send you my marble run and you can modify it for me? Lol

@MartinsAssemblyHaven Ай бұрын

Thank you so much, it’s much appreciated 😊 Haha yeah sure, send it over 😂🤣

@ASMRBrainiac Ай бұрын

@@MartinsAssemblyHavenIt is in the post 😆

@MartinsAssemblyHaven Ай бұрын

I’ll be waiting for it 😂

@ASMRBrainiac Ай бұрын

@@MartinsAssemblyHaven lol

@AbominableIronSloth 24 күн бұрын

When connecting it to be mains powered, does it connect to the part that the old motor connects to, or is it running into its own separate plug?

@MartinsAssemblyHaven 24 күн бұрын

Hey, I’m not sure if I’m misunderstanding your question, but the mains cables connect directly at the back of the new motor 🙂

@AbominableIronSloth 23 күн бұрын

Ah ok so just cut the cables off the old motor?@@MartinsAssemblyHaven

@MartinsAssemblyHaven 23 күн бұрын

If you’re planning on connecting the existing motor to mains, I would definitely not recommend that. The best you could do is attach a 9V battery to it to make it go faster, but that will eventually burn out the motor as the existing motor is only like 5V and then you’ll have to replace it.

@AbominableIronSloth 23 күн бұрын

No no, I mean how do you connect the new motor to the mains. Did you take the wires from the old motor and hook it up to the new one so it has that little connector on the end?@@MartinsAssemblyHaven

@MartinsAssemblyHaven 23 күн бұрын

Oh alright sorry. You got me worried there 😅 Yeah I just cut of the end of the plug and connected it as the old motor wires are just a bit tiny. Just make sure the cable you are using has an output of 12V or less and not much higher and obviously be super cautious as electricity is no joke.