Пікірлер
@Dash9090
@Dash9090 8 сағат бұрын
Art🤩🤩🤩👍👍👍
@MartinsAssemblyHaven
@MartinsAssemblyHaven 7 сағат бұрын
Aaww thank you so much, I’m really glad you like it 😃
@Ledgit524
@Ledgit524 11 сағат бұрын
I remember this when my grandma died😢
@MartinsAssemblyHaven
@MartinsAssemblyHaven 11 сағат бұрын
Aaww I’m so sorry about your loss my friend 🙏
@markbuonvino580
@markbuonvino580 15 сағат бұрын
I purchased the following motor on amazon. I haven't received it yet and I imagine I will have to do a lot of things before it will work for me: Greartisan DC 12V 100RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox
@MartinsAssemblyHaven
@MartinsAssemblyHaven 8 сағат бұрын
Hey Mark, I’m glad you got it from Amazon as you can return it no problem. So I have finished my modifications with a new motor installation + speed controller and a switch and I’ll release the video tomorrow 😊 And I can tell you that 100 RPM is too slow, I tested it out myself, even with a 200 I felt that the desired speed for myself personally was nearly there, but not quite. So I got a high torque 12V 400RPM which is just amazing, but I don’t use all 400 RPM of course because of the speed controller so it doesn’t go overboard if plugged in without the controller.
@sims6656
@sims6656 16 сағат бұрын
Я хочу такое же механизм
@MartinsAssemblyHaven
@MartinsAssemblyHaven 16 сағат бұрын
Ах, это великолепно 😃 Вы можете найти его, нажав на ссылку в моем первом закрепленном комментарии, и наслаждайтесь 😊
@namle6829
@namle6829 20 сағат бұрын
😢😢😢😢😢😢😢😢
@MartinsAssemblyHaven
@MartinsAssemblyHaven 20 сағат бұрын
Aaww don’t be sad, it’s just a fictional story automata model 😊
@alanhaskell65
@alanhaskell65 Күн бұрын
I think mine is normal and yours is the anomaly?
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
It’s possible, but too many people are having g same issues with it.
@Alexander-io2tk
@Alexander-io2tk Күн бұрын
Hey why don't you do this one fast
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Hey Alexander. I don’t think it would sounds nice if it was hand cranked really fast 🤔
@alanhaskell65
@alanhaskell65 Күн бұрын
Mine don’t work that way. What results are others getting?
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
When you push the button twice, does the light not come on fully and still?
@alanhaskell65
@alanhaskell65 Күн бұрын
Yes
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Ah that’s good then. Is there something that doesn’t work the way that it should?
@alanhaskell65
@alanhaskell65 Күн бұрын
I think mine is normal operation and yours is the anomaly?
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
It’s possible but I don’t think so as too many people are finding it far too weak or slow etc
@user-zw4bm9cm3r
@user-zw4bm9cm3r Күн бұрын
😳
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Hehe it’s not that shocking 😜
@RoeShawn
@RoeShawn Күн бұрын
I love the lights, its way brighter than what I was expecting, but that not my complaining on that LOL. It does slow down on the gears from night city other times it just stops (pause) then it goes again, I been rewaxing the gears mainly on the night city, but it could possibly be where u said part of the wood gear is rubbing against the moving gear. Im exciting that its done, going to add the marbles next. Thank you once again for the fun tutorials for the link, night city and spaceport... Now I have to decide what to do next LOL 🙂
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Hey Shawn, I do agree that the lights do look bright enough and cool 😎 That’s a bit of a shame that it doesn’t run perfectly, hopefully you manage to sort it out so it runs a bit better 🤞 And you are more than welcome, I’m really glad you enjoyed my videos 😊 And if you’re looking for a new project, ROKR has recently release their electric ship, and that looks epic 😃 If you fancies any other model from them, if you used my affiliate link here then that would be greatly appreciated 😊 shareasale.com/r.cfm?b=1707320&u=4069976&m=106192&urllink=&afftrack=
@AntoniaZevedei
@AntoniaZevedei Күн бұрын
I showed this to my little girl further and she got scar
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Aaww sorry Antonia, you can tell her that it’s just a fictional story model and the lady doesn’t get eaten by the wolf 😊
@alanhaskell65
@alanhaskell65 Күн бұрын
Hi, I found the motor on TEMU for about $8.00. Also available on eBay. Alan
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
That’s excellent Alan. I got one from Amazon for about the same price 😊
@Agra-xe9oc
@Agra-xe9oc Күн бұрын
Hello. congrats. Do you have a pic and the specs of the motor?
@MartinsAssemblyHaven
@MartinsAssemblyHaven 20 сағат бұрын
I’ll personally have a video out tomorrow on what I use and how I customise it 😊
@max_koning
@max_koning 10 сағат бұрын
​@@MartinsAssemblyHavengood!! Just finished the full set.... and it's soo slow! Looking forward to your vid.
@MartinsAssemblyHaven
@MartinsAssemblyHaven 8 сағат бұрын
Yeah it is really slow. And that’s awesome, just keep an eye out for it 😊
@alanhaskell65
@alanhaskell65 Күн бұрын
My blue lights don’t come on until I press the button. A long press turns all off (motor and lights) Alan
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
They should come on on dimmed setting once the usb is plugged in, then press once for the motor to also come on and if you press the button again, the lights should come on on full blast and be still and not dim 😊
@thiagobalborin9005
@thiagobalborin9005 Күн бұрын
hnunojloll❤🐺👧
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
🤩🤩🤩
@user-xe3rw3fd8c
@user-xe3rw3fd8c Күн бұрын
but he did not gave my aunt a chance to be alive again from cancer
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Aaww man that is a a sad story 😢
@obeymusic1059
@obeymusic1059 Күн бұрын
How nice that looks good 👍🏽👍🏽👍🏽👍🏽😅
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Aaww thank you so much, I’m really glad you like it 😊
@nhanhthach6232
@nhanhthach6232 Күн бұрын
Concặc
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Xin lỗi điều đó có nghĩa là gì?
@ThikhenPhan-cf6le
@ThikhenPhan-cf6le Күн бұрын
😂😂😂
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
I’ll take it as you enjoyed it 😅
@ernestoemanojr9484
@ernestoemanojr9484 2 күн бұрын
😮😮🤢🤢🤢🤢🤢🤢
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
Haha I assume you didn’t enjoy it that much? 😬
@rodadams8422
@rodadams8422 2 күн бұрын
Luv this train 😊
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Aaww thank you so much, I’m really glad you like it 😊
@user-sd5nw8wk8z
@user-sd5nw8wk8z 2 күн бұрын
เเฝัม่าะ😂😂😂😂😂😂😂😂
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
ฉันไม่แน่ใจว่า Google แปลความคิดเห็นของคุณถูกต้องหรือเปล่า ดังนั้นฉันจะอยู่เงียบๆ 😂
@rodadams8422
@rodadams8422 2 күн бұрын
This is fantastic 👏
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Thank you very much, I’m really glad you like it 😃🤩
@ndra839
@ndra839 2 күн бұрын
😂🥱😴
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Haha I’m not sure if you found it boring or you loved it? 😅
@ndra839
@ndra839 2 күн бұрын
🎉
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Thank you thank you 😊
@rodadams8422
@rodadams8422 2 күн бұрын
Absolutely fantastic beautiful model glad you got the jamming fixed 😀
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Aaww I’m absolutely loving your comments, thank you so much 😃
@rodadams8422
@rodadams8422 2 күн бұрын
Absolutely beautiful (new subscriber)😊
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Hey Adam’s, Aaww thank you so much, it’s much appreciated 😊
@iimiim3840
@iimiim3840 2 күн бұрын
😊😊😊😊😊😊😊😊😊❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉😮😮😮😮😮😮😊😊😊keren Bang bagus keren
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Aaww I’m really glad you enjoyed it 😊🙌
@GameplayHero658
@GameplayHero658 2 күн бұрын
Such a fascinating piece, well done
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Hey, thank you so much for that, I’m really glad you like it 😊 And these automata’s are really amazing, love them cause they’re just so different 😃
@GameplayHero658
@GameplayHero658 2 күн бұрын
@@MartinsAssemblyHaven I agree
@savitaputriwibowo
@savitaputriwibowo 2 күн бұрын
😮
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
I know right, it’s amazing 🤩
@xetaicantho8340
@xetaicantho8340 2 күн бұрын
Đứa bé chắc chắn bị con xói Bắc với ăn đồ ăn đó
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Haha thật tuyệt vời
@UliMaroziana
@UliMaroziana 2 күн бұрын
Jnvjgjgjg😅😅
@ASMRBrainiac
@ASMRBrainiac 3 күн бұрын
Did someone say dragon? Yes please!
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
@@ASMRBrainiac Haha I love that 😅 I’ll take it as you enjoyed it and thank you 😊
@ASMRBrainiac
@ASMRBrainiac 2 күн бұрын
@@MartinsAssemblyHaven I did, it’s amazing!
@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Thank you so much, I’m really glad you like it 😊
@TimeIsTickingBS
@TimeIsTickingBS 3 күн бұрын
Absolutely beautiful!
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Thank you so much, I’m really glad you like it 😊
@Arin-ne5yy
@Arin-ne5yy 3 күн бұрын
If you made that it is very impressive
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
@@Arin-ne5yy I did assemble it yes 😊 It comes as an assembly kit from a brand called Iló, and they have some incredible automata models like this one 😊
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Leave a like if you love Chinese Dragons 👍🤩 And receive 5% off on this automata automatically on Amazon: www.amazon.com/promocode/A1CSW4W1NGRA8X and enjoy the build ⚙️🎶
@RCBirds
@RCBirds 3 күн бұрын
Nice dragon. I like that they painted the parts
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Hey, thank you so much, I’m glad you like it 😊 I agree, that’s a nice wee extra as it wouldn’t be as impressive if it was all in just plain wood colour
@alanhaskell65
@alanhaskell65 3 күн бұрын
Hi, Thank you for the video. I just hacked in a powerful 90 rpm worm gear motor. Everything now works better and faster. Thanks for the suggestion. Alan
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Hey Alan, you are more than welcome and that’s excellent, chuffed for you 👌 I’ve got a 12v, 400 RPM high torque motor on stand by to test out, of course with a speed controller so it doesn’t go overboard 😅
@VamoozE
@VamoozE Күн бұрын
Hi Alan, where about did you source the motor? I am llooking for one myself.. Any help would be apprecaited
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
You can find a tone of these type of motors on Amazon 😊 Just type in ‘high torque 9 or 12v motor’ and it will give you lots of options of their RPM’s.
@VamoozE
@VamoozE Күн бұрын
@@MartinsAssemblyHaven Thank you! Do you by any chance have a link to one that would work in regards to the dimensions and fitting on the existing link pack kit without muhc modification?
@MartinsAssemblyHaven
@MartinsAssemblyHaven Күн бұрын
No problem at all. And no unfortunately I don’t have the one similar size. I did find one like it, but slightly bigger, but it was far too slow so I had to ditch that idea. I think the only way is to modify the existing motor box or just buy or create one yourself 😊
@TimeIsTickingBS
@TimeIsTickingBS 3 күн бұрын
This is beautiful. I love the colours 🙂
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Aww thank you so much, I’m really glad you like it 😊
@danielmercaderalcayne7329
@danielmercaderalcayne7329 3 күн бұрын
Really amazing!! I'm a pianist and I can tell that this looks really good I've been thinking about buying one of these, and now I'm thinking about the painting Thanks :D
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Hey Daniel, aahh that’s amazing and thank you so much for that, it’s much appreciated 😊 And you’re gonna love assembling this and then painting it, it’s super satisfying 😃
@danielmercaderalcayne7329
@danielmercaderalcayne7329 3 күн бұрын
@MartinsAssemblyHaven my friend has got the cello, and we're thinking on painting them together Do you think I should first build it and then unbuild, paint, and build it again or just paint it and build it?
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Ah brilliant. So the thing is that if you paint it while all the pieces are on the board, you can’t really paint the sides as they’re in the boards, but you could pop pieces out, paint it and then assemble. But be careful of the thickness of the paint as the pieces won’t click in places if there’s too much paint. Or you could just paint it while all the pieces are on the boards, that would definitely be the easiest way 😊
@danielmercaderalcayne7329
@danielmercaderalcayne7329 3 күн бұрын
@@MartinsAssemblyHaven Thanks, I'll see what I do :)
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
No problem at all 😊 I’d also love to know how you get on once you’re done 😁
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Make sure you leave this stunning Dragon a Like 👍 And receive 5% off automatically on Amazong: www.amazon.com/promocode/A1CSW4W1NGRA8X and use my promo code 05MARTINS on their website to receive 5% off: shop.ilobuild.com and enjoy building your Automata kits 😊
@pigno56
@pigno56 3 күн бұрын
Italy 👋
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Aahh that’s amazing 😃 Went on a skiing holiday 2 years ago and it was absolutely incredible ⛷️
@KodiMalaysia
@KodiMalaysia 3 күн бұрын
hi
@MartinsAssemblyHaven
@MartinsAssemblyHaven 3 күн бұрын
Hey Kodi 😊
@ReinaIsabelArgueta
@ReinaIsabelArgueta 4 күн бұрын
❤❤❤😊😊😊
@MartinsAssemblyHaven
@MartinsAssemblyHaven 4 күн бұрын
Aaww, I’m really glad you enjoyed it 🤩
@user-fq6hc7sq4z
@user-fq6hc7sq4z 4 күн бұрын
Вау какой крутой михонизм афигеть так всё риалисчично❤🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩😛🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩
@MartinsAssemblyHaven
@MartinsAssemblyHaven 4 күн бұрын
Привет, спасибо большое, я очень рада, что тебе понравилось 🤩
@linho5879
@linho5879 4 күн бұрын
Cô bé quàng khăn đỏ kiểu: Để yên cho tôi ăn
@MartinsAssemblyHaven
@MartinsAssemblyHaven 4 күн бұрын
haha anh ấy rất gần, nhưng chưa đủ gần 😅
@jamesmcbride8612
@jamesmcbride8612 4 күн бұрын
I am in Cranberry Township, PA, USA. I havent started building mine yet, but I already bought the Spaceport and Link-Up, so I will have those to build later on :) Thank you very much for this video, and especially the warning at the beginning to 'sand everything'....I sorta figured that I would have to do that.
@MartinsAssemblyHaven
@MartinsAssemblyHaven 4 күн бұрын
Hey James, oh from a different part of the USA, that’s excellent 😃 And that’s brilliant, you’re gonna love both of the kits, apart from the motor once it’s connected to both of the runs, but just on spaceport it’s pretty perfect 👌 And you’re more than welcome, I’m just glad I can help out 😊
@thethlaing9373
@thethlaing9373 5 күн бұрын
This guy need a raise
@MartinsAssemblyHaven
@MartinsAssemblyHaven 4 күн бұрын
Haha I wish, but thank you 😅
@michaelnelson5356
@michaelnelson5356 5 күн бұрын
thank you very much. I'm watching you from Florida
@MartinsAssemblyHaven
@MartinsAssemblyHaven 4 күн бұрын
Hey Michael, you are more than welcome and I hope you find it helpful 😊 Another from the sunny Florida, amazing 😃