Glad the timing is adjustable. You don't need to reverse the wires... As long as the front motor has positive timing, and the rear motor has negative timing, you're good! I'm still building my Super Clodbuster, silver cans, 3S Battery, but I've done modifications outlined in my latest Video.

Very cool clodbuster The power you would be looking for would be coming from something like at least a 16 turn I would go even deeper like 12 turn you'll see a noticeable power increase with 13 tooth pinions which are stock I would highly recommend upgrading to some good pinions. I personally liked running the Traxxas EVX speed control with two 21-turn 550 motors in my truck but in order to do that you have to run four link bars and they will touch the floor link bar. What I run in my truck now is twin 5200 KV brushless motors

Need 2x brushed esc with 2x 10t motors

Thanks for sharing. I like the chassis, I tried to 3D print their BTA steering, but my first design wasn't strong enough, I haven't made another attempt. Anyway, I installed 2500KV brushless motors (which I think are close to equivalent to 17.5T) on 3S LiPo battery, and it made the truck significantly faster. Maybe if you switch to an ESC that can handle more voltage (Hobbywing 880 can handle up to 4S LiPo on dual brushed motors), then you'd find the speed that you need/want.

Great video Edward. I just ordered 2 Holmes Hobbies 21t retro sport motors for my build, as John Holmes himself recommended them to me.. I’m not looking to be super fast, just a bit more power than stock😁

Clodbusters need torque. If you get the adjustable plate so you can use a different pinion youll see better results, or use a 550 size motor like the titan for the old e-maxx

Maybe a brushless motor with more voltage will help 🔵🔵🔵👍👍👍🙂🙂🙂🔵🔵🔵