Tamiya Super Clodbuster Build Guide P1 - Steps 1 to 14 Plus Hints and Tips!

Рет қаралды 7,119

Күн бұрын

Hello and welcome to Part 1 of my build guide for the awesome Tamiya Super Clod Buster. This part covers the completion of steps 1 - 14 of the user manual, which includes installing the servo, body posts and reinforcing plates to the chassis and the construction of the front and rear axles and gearboxes. I hope you find this guide useful and if you have any questions please feel free to ask in the comments section.
Many thanks to Bob of ‪@UncleBobsRC‬ for sending me a full set of metal bearings and hardened steel pinions. Cheers mate!
And of course a massive shout-out to the ever-generous RC Elf for gifting this incredible RC Monster Truck!
About The Super Clod Buster:
This monster truck features a body that was inspired by classic pick-up trucks from the 1980's, giving it a realistic appearance.
The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.
Features:
1/10 scale R/C assembly kit.
The Super Clod Buster body has been reproduced in injection-molded plastic.
Highly-durable bathtub type monocoque chassis frame.
Front/rear trailing arm suspension with 8 coil spring dampers.
Front/rear sealed gearboxes are equipped with differential gears.
Kit includes ESC. (Original kit included a mechanical speed controller)
Two 540 motors included.
Sticker sheet included.
Requires: Radio Control System, High Torque Steering Servo, Battery Pack, Suitable Charger, Paint and Tools for Assembly.

Пікірлер: 114

@UncleBobsRC Жыл бұрын

Hiya Mark, as you already know, screw BB2 is in Bag B (BB), the 3mm nut BC1 is in Bag C (BC) and so on.. BR (Rod Bag), BH (Hardware Bag).... The letters tell what bag. Ah Yes, Don't ever forget those 3mm nuts in the cases (unless your putting on 4 link bars). Such a great start dude!!!! I would say your half done other than the body.. Have a great weekend my friend, ATB to all!!!! Here if ya need me.

@MarkBryanRC Жыл бұрын

Hiya Brother Bob! I'm lucky to have you covering my back and sending such sage advice! Man, I'd never have worked out those part and bag numbers, they should tell you that in the build manual!!! Yeah, I thought I was about half done, lots of repetition on this build though! 8 shocks to do! A smashing weekend to you too, mate, many, many thanks again and cheers for sending those parts!

@UncleBobsRC Жыл бұрын

@@MarkBryanRC Hey Dude, that's why we are all here, show casing & help!!! I remember the bag steps from my early Tamiya kits (they did mention those bag letters back then) they also showed the hardware to scale on the headers (your beetle should have been that way). Yes sir, 8 "shocks" but they build super fast (not like the TXT-2). As for those extra bits, brother you are so welcome (Rob Too), Your help to me is priceless as is your friendship, I kind of had to do my part for planting the idea in some ones head. ATB my friend and the best to everyone!!!!!!

@MarkBryanRC Жыл бұрын

@@UncleBobsRC Thanks mate, you meet the nicest people with a Tamiya... 😁😁🙏🙏👍👍

@mad-beerc3818 Жыл бұрын

Like watching a jedi rc master at work haha great stuff Mark!

@MarkBryanRC Жыл бұрын

Well I'm not sure about that, James! 😅 But thanks for the compliment anyway! Cheers mate 👍

@mad-beerc3818 Жыл бұрын

@@MarkBryanRC Haha l can't wait to see this big boy in action!

@ghadi202X Жыл бұрын

Just picked up mine today, I remember this truck from my childhood

@MarkBryanRC Жыл бұрын

Cool! It sure is an awesome truck, have fun with it! 😎👍

@ianat5016 Жыл бұрын

Great video as always.bring on part 2 😁

@MarkBryanRC Жыл бұрын

Hi Ian and many thanks as always! Working on it now, dude! 🙏😉👍

@HaydadRC Жыл бұрын

Great start Mark! Such an awesome truck!👍😊

@MarkBryanRC Жыл бұрын

Thanks Jeremy, you got that right my good friend!👍

@rcwreck-creation Жыл бұрын

Why didn’t Rob help you with it? Wait, don’t tell me! It’s the friction dampers isn’t it? 🤣🤣 Well done Mark! You touched on the two very important parts of that build so far (centre the servo before installation & making sure the two nuts are captured in the gearbox (now that sounds wrong, don’t it!?😂) Thanks for sharing My brother from the RC mother! Look forward to the next. 🍻👊

@MarkBryanRC Жыл бұрын

Haha 😄 yes he hates those friction pogo sticks 🤣 Thanks for confirming that I got the important parts right! I know you know these trucks inside out! Thanks for watching and leaving a great comment my friend! All the best! 😉👊👍

@fpvDRE Жыл бұрын

another awesome build brother love the step by step guides can see every you get and tips along the way she gonna be a beast this one brudda 👍enjoy marky !!

@MarkBryanRC Жыл бұрын

Thanks a ton, brudda! Yeah I love doing these builds and videos, it's how it all started for me on here! Definitely, this truck has got "BEAST" written all over it! Cheers, dude!👍

@yodadarksideGreenHawksRC Жыл бұрын

Evening Mr Bryan! Everyone loves a Clod! 😍 Another superbly presented video matey, I'm guessing this will be a great help to less experienced builders.... the detail is very comprehensive. 👌 Knowing you it must have been very hard saying 'brass balls' and 'flange nuts' so many times without a cheaky giggle! (good job Rob wasn't there!) 🤣 Looking forward to building mine, still not sure what route I'm going yet..... been looking at the aluminium and carbon 'frame chassis' and servo on axle steering mods available from the clod shop. So many upgrades available, unfortunately it's starts getting very expensive so will probably be a project for when finances are a little better! I'm a tad concerned that the stock ABS plastics won't last too long the way our trucks get run so these upgrades could work a treat! 🤣 Regarding the screw bags, I seem to remember this is the way Tamiya used to do it back in the day? But I may be wrong, the eighties were a long time ago! Can't wait for the next instalments bud, and really looking forward to the running videos.... These things are a delight to watch! 👍 👍 👍 👍

@MarkBryanRC Жыл бұрын

Hiya mate! Glad you thought it was detailed, I try to make these videos so you could build along without a manual, well, that's my thinking anyway! Yeah I did struggle with the balls and nuts double entendres! :P These Clods sure can become expensive if you go the upgrade route so I'm staying stock(ish) with mine. Lets see if I break it! I don't intend to do anything crazy when running it anyway... but this is me and I know I often get carried away! Fingers crossed! The 80's are a blur to me, too... so many beers ago! Thanks for the kind words, buddy, all the best from me! 😉🙏👍

@andrewmagro7703 Жыл бұрын

Gday Mark, This is a build that ive been putting off for two and a bit years now and watching this I know why ,lol do step then repeat and repeat and again but once you get cracking on i can see the sign to the inn in the end , Massive thanks for showing that its not that heard just that you need to pay full attention and have all the bits required for each step set out in front prior to starting the step but thanks to the RC Elf for this beaut kit for the channel cheerio guys 🙂

@MarkBryanRC Жыл бұрын

Gday again Andrew! Absolutely, mate, you can easily do this kit, it's just as you say, pay very special attention to the diagrams and take your time, when you get one bit right, the rest is just repetition! It ends up being quite relaxing and rewarding in the end! And yeah, the RC Elf is THE MAN!!!! 🙏😎👍

@PeteWylieRC Жыл бұрын

Hiya matey. Well that's all coming along nicely. I can't help thinking that there is a lot of that famous Tamiya shiny brittle plastic on that. I'm trying to think what will break first in a roll over. Body posts I'm guessing 🤔 Anyway I'm sure you will be super careful while racing against Rob! All very well explained as ever mate. Looks like an interesting build. Cheers for now and enjoy your weekend 😁👍

@MarkBryanRC Жыл бұрын

Hi mate! Hmm, yes I think you are right ✅ about the plastic, and I've been told that the body posts go first! I won't be running it much with the stock body though. Definitely a basher shell for racing Rob! Thanks for the supportive words, Pete.🙏 definitely enjoying the build though! Hope your weekend is going well! Cheers 🍻 😁👊👍

@ShenRC Жыл бұрын

Fun Build for sure! Your going to have a blast bouncing this big beast around over everything!!

@MarkBryanRC Жыл бұрын

Many thanks Steve! Tons of fun as you say! Oh yeah, gonna have some good times with this monster 👻! Take care dude! 🙂

@BasBoyRC Жыл бұрын

Digging through bags nice old school touch :-) that's how I started with Tamiya. These are nice kits to build and still very popular. My nephew has the original 80's version.

@MarkBryanRC Жыл бұрын

Thanks Mal! Yeah this is a real throwback to the 80s for sure but enjoyable all the same. I don't think it's changed much since then! All the best mate! 👍

@BasBoyRC Жыл бұрын

@@MarkBryanRC I think just those plates that the balls screw into is it.

@MarkBryanRC Жыл бұрын

Yeah, you got it dude! :)

@tonylinsell8918 Жыл бұрын

There’s a few parts in that clod Mark lol…nice build vid

@MarkBryanRC Жыл бұрын

There sure are, Tony! Never had a kit with so many nuts, bolts and screws! Thanks mate! 🙏😉👍

@theoagrc Жыл бұрын

Amazing start Mark and thanks for sharing. The Clod looks like a beast and a proper Tamiya where all the bags get dumped into takeaway containers and the fun begins 😂

@MarkBryanRC Жыл бұрын

Thanks my good friend and thank YOU for watching! Oh yeah, it is a beast indeed, can't wait to get those massive tyres out and fitted, then it'll look proper! Hehe, there really were tons of metal bits to dump into containers, it was hard to know where to start! All the best, matey! 👍

@catcancrunch7260 Жыл бұрын

Another good one on its way, thanks for your upload mate 👍🙏🐱

@MarkBryanRC Жыл бұрын

Thanks for the visit as ever my friend Cat! Yep, this is definitely gonna be a good one! Cheers! 🙏👌😊👍

@AddamsPlayground Жыл бұрын

Great walk through and even though i have built 3 of these I still love seeing them come together!! That pesky nut in the gearbox gets me every time!

@MarkBryanRC Жыл бұрын

Hi Addam and thanks for the visit, dude! Wow, 3 built already?!?!?! This is obviously my first and I'm loving it already! Hehe, yeah, Bob and the Elf told me about that pesky nut! I got good guys covering my back! Cheers, Addam!

@RCBirds Жыл бұрын

Great build Mark and very value tips. The servo adjusting is essentialest one.

@MarkBryanRC Жыл бұрын

Thanks a ton, Dirk! Definitely, if you don't centre the servo it will all have to be unassembled to get to it for adjustment! All the best my friend! 👍

@RcNickster709 Жыл бұрын

Well done once again Mark my friend. This is a pretty awesome rig. Got to love that stance. Looking forward to seeing this thing come together. One of my favorite Tamiyas to watch for sure. Next to the lunch box, I think. lol Thanks for sharing. Have a good weekend. :)

@MarkBryanRC Жыл бұрын

Hiya Nick and thank you for the kind message. You are right about the stance of this thing, it just say "watch out, I mean business"! 😁 Gotta be on of my favourites too! All the best my good friend, take care! 😉👍

@NANNIRC Жыл бұрын

Hi Mark, as usual great video. I like the camera position that films perfectly as I was at the work. Waiting for the next steps my best wishes and Ciao! Nanni

@MarkBryanRC Жыл бұрын

Awesome, thank you Nanni! Yes, the camera directly above the workbench allows me to assemble easily and gives a good perspective on the build! All the best my friend, ciao!

@flyingfortressrc1794 Жыл бұрын

Man I hope to add one of these to my collection for sure. Such an awesome Tamiya Icon.

@MarkBryanRC Жыл бұрын

Oh yeah dude, this has got to be one of the most iconic Tamiya's of all time! Fingers crossed 🤞 you can get one! 🙏 😉👍

@rc-dom-uk Жыл бұрын

Quite an involved build mate. Going well 👍

@MarkBryanRC Жыл бұрын

Thanks Dom, yeah there is a lot going on and it's trickier than most, i seem to be making more mistakes anyway! Good job I got Bob watching my back, he's been a great help! 🙏😉👍👍👍👍

@rc-dom-uk Жыл бұрын

@@MarkBryanRC yeah im not into complicated builds 😂maybe I’ll ask you to build mine 😉😂👍

@MarkBryanRC Жыл бұрын

Anytime, matey! 😁👌👍

@robbrennanrc Жыл бұрын

Ah brought back lots of memories of my build mate. But hay I did only finish mine a few days ago hehehe😄 Great build so far dude you'll soon have it finished. Let me know if you want to paint it around mine? Slater matey.

@MarkBryanRC Жыл бұрын

Hi dudester, haha you have a memory about as good as mine! Yep it's coming along nicely, I'll be ready for paint soon. Thank you for the kind offer, I'll take you up on that one matey! Cheers! 😁

@theRCcarshow Жыл бұрын

nice monster truck

@MarkBryanRC Жыл бұрын

Thanks, it really is a fantastic monster to build!

@tiborvon Жыл бұрын

Cool project and build Mark. Top stuff buddy 👍👍

@MarkBryanRC Жыл бұрын

Thank you my mate Tibs! Yeah, this should be a smasher when it's all finished but a fair way still to go. Cheers! 🙏😉👍

@tiborvon Жыл бұрын

👍👍👍

@outbackrcaustralia4895 Жыл бұрын

That's going to be a good long build👌 Thanks for sharing your video mate, looking forward to part 2👍🦘🇦🇺

@MarkBryanRC Жыл бұрын

You bet, mate, there is a lot of hardware and screwing involved in this kit! It should be me thanking you for watching and leaving a nice comment, cobber! All the best! 🙏😉👍

@outbackrcaustralia4895 Жыл бұрын

@@MarkBryanRC Thanks Mark👍

@rivierarc Жыл бұрын

I can't wait until I have the space to build my Clod (& store the fully built car!)

@MarkBryanRC Жыл бұрын

Oh yes mate, you need plenty of space for this mammoth truck! Thanks for watching, my friend!

@rivierarc Жыл бұрын

@@MarkBryanRC no worries. Currently the bathroom is ripped apart and 'my room' is being made smaller so nowhere to build something that big. Just finishing a Race truck on the TT01e though... so best stop there for the moment

@MarkBryanRC Жыл бұрын

Hope the bathroom refurb is going well - sometimes real-world issues come before our hobby! Good luck with the race truck, I'll pop over soon and see how you are doing! :)

@rivierarc Жыл бұрын

@@MarkBryanRC cheers. Hopefully the bathroom will be done by the end of the week. Other things happening so hopefully more time coming up in the next few months so that'll mean more RC time. Can't be a bad thing 😀

@madsrcbuggy Жыл бұрын

Very nice to follow along on this one, Mark! I don't think I've ever seen one of these being built before, so it's quite interesting! I don't think I'll ever be building one myself, but at least I can enjoy yours! As always, I'll be looking forward to seeing next parts, and of course see the mighty machine out it its element, together with Rob's version, also. All the best, mate, have a great weekend!

@MarkBryanRC Жыл бұрын

Hiya Mads! Yeah I don't think there are many step by step build videos for this one, Bob told me I had to do it! You just might get one someday! Same here, the building is good but the driving is better! Take care mate and hope your Sunday is going well 👍 😊

@StankoPerko Жыл бұрын

Looks like an awesome build. Cheers.

@MarkBryanRC Жыл бұрын

Many thanks my friend, yes this really is a bit special! All the best! Cheers!👍

@3TRCGarage Жыл бұрын

Hi Mark, this one looks complicated and fun. Tamiya kits are so well engineered. It’s going to be awesome 👍🏾

@MarkBryanRC Жыл бұрын

Hi Paul - yes this is a bit of a tricky build, you really need to study the diagrams in the manual to get things right. Definitely well made even for such an old design! I agree, this truck has awesome written all over it! Cheers! 🙏😉👍

@barrycheesemore2928 Жыл бұрын

Awesome stuff, love your build videos!!

@MarkBryanRC Жыл бұрын

Thanks a bunch, Barry! Music to my ears, dude! :O)

@classicvwbugs Жыл бұрын

Love the build you are doing Mark, you are persuading me to get a new Clod! Question, could you buy a new clod and spray up some parts to make it look like a vintage Clod? Get some red to paint the parts and paint the body? Awesome as always.

@MarkBryanRC Жыл бұрын

Hi Chris, hope you are doing well, pal! Oh yeah, every Tamiya fan needs a Clod! You could definitely spray the body any colour you like and I have seen others spray the detail parts like the bumpers in different colours, too. Gotta be worth a go! Thanks, dude, sending good wishes across the pond!

@classicvwbugs Жыл бұрын

@@MarkBryanRC excellent 👍 thank you mark, all the best to ya!

@JF-RC Жыл бұрын

Hi there Mark, oh boy! That Clod Buster seems just the right kit for me! I love the kits that you have to have all the bags open and your absorbing yourself in the hunt for the correct components, for each step….so wish I could have one too 😊. The Subaru Brat was like that, open all the bags, just lived it. Just love listening and watching you get stuck into the build. Have a lovely weekend, Best wishes to you all 😊😊😊

@MarkBryanRC Жыл бұрын

Thanks John! No I don't think I've built one where you have to open all the bags at once before! Good fun hunting for the parts though! You would love this build too my friend. Glad to hear that you enjoyed it! Hope your Sunday is going well, take care mate! 🙂

@thecontractor365 Жыл бұрын

As always Mark, a very thorough and well explained build video. I'd imagine this build series will be longer than normal, due to the complexity and number of parts that come in this kit, but it's all good as I find these videos kind of relaxing - watching someone else doing all the work...😀. Does this Clod come with ball bearings as standard in the kit or did you add your own. Also do you plan to add the rear wheel steering option to this one ? Great stuff mate, looking forward to the next instalment...😀👍🏻.

@MarkBryanRC Жыл бұрын

Hiya dude! Thanks for the great comment as per! Nah, I think the chassis will be finished in part 2, yes there's a lot more than usual to put together but there's so much repetition and I only show one of each! Glad you find them relaxing, I brick it during filming in case I get it wrong, an believe me I often do!!! 😅 Bob was a star 🌟 and sent the bearings! Oh and the RWS isn't an option, you can't lock the rear steering without buying other parts! Hope your Sunday is going swimmingly, take care mate! 🙂 👊🤝👍

@BlackSeaRC Жыл бұрын

Despite its age, it is still one of the few RC monster trucks that actually looks like a monster truck. Did Tamiya ever explain why the grey version is only available in limited markets?

@UncleBobsRC Жыл бұрын

The Gray Edition Clod Buster was done in collaboration with Horizon Hobby in the States.

@BlackSeaRC Жыл бұрын

@@UncleBobsRC I have always admired the Clod Buster and this grey version looks much better than the standard one in my opinion.

@MarkBryanRC Жыл бұрын

You got that right, dude! Such a classic design and a timeless truck! As Bob said, it was a one-off production run for Horizon/Tower Hobbies only for the US. Cheers! 🙏😊👍

@BlackSeaRC Жыл бұрын

@@MarkBryanRC I always wanted one when they first came out in the 1980's but decided to get something slightly different and bought a Kyosho Double Dare instead (not my best RC buying decision!). This put me off the Kyosho brand for decades...

@MarkBryanRC Жыл бұрын

@@BlackSeaRC Yeah, I always wanted one, too, but they are expensive for what they are... never heard of the Double Dare, but thanks to you I will be avoiding it! I only have the Scorpion, and I really love that buggy! Cheers!

@MikeTheBike58 11 ай бұрын

Great videos mate,I have a super clod buster on my list of builds along with the Agrios. In your opinion is the clod worth upgrading or more fun keeping as standard?.

@MarkBryanRC 11 ай бұрын

Hi Mike! Thanks! You will love the builds of both those monster trucks. Very different though! As for the Clod, I'm leaving mine stock as it's a hoot just as it is. Might be worth adding a couple of peppier motors later but remember you can't used timed motors like the Sports Tuned as the rear motor works in reverse. Have fun with them, mate! 😎👍

@CheapCheerful 2 ай бұрын

On Step 4, I notice when you attach the metal plate on one side with the BH3 6mm ball connector on the other, there are gaps in between designed for captive nuts, however the manual doesn't show inserting them. I put them in anyway as it would seem to add strength, though I do worry I'll be short 4 nuts at the end of the build. Anyone whose come across this, I'd like to know what you did! Thanks :)

@MarkBryanRC 2 ай бұрын

I must admit I never noticed those gaps when I built mine. I haven't had any issues though. Thanks for pointing that out, I wonder if anyone else did the same as you? 🤔👍

@classicvwbugs 5 ай бұрын

Hey Mark! Have you upgraded the clod yet? Any upgrade in the motors?

@MarkBryanRC 5 ай бұрын

Hey Chris! No my friend, the only upgrades I did was to fit ball bearings and steel pinions. As this is a special version (and from the RC Elf) I like it the way it is! I may get another standard Clod later and hop that bad boy up!!!

@classicvwbugs 5 ай бұрын

@@MarkBryanRC very good 👍

@brianwood9849 Жыл бұрын

Nice video thanks . Did you paint the body or leave it ?

@MarkBryanRC Жыл бұрын

Cheers, Brian! Yes, I did paint the body and it came out pretty good. If you are interested you can see it here: kzfaq.info/get/bejne/iMpxeqeTsZmbnXU.html

@coopersharp2921 Жыл бұрын

Sorry, probably not the right video for this question, but it is about my tamiya TT02. I bought a 1998 ford escort kit and am in love with the rims that come with it. The tires recently worn out too much and I want to keep the rims, but get new tires. Where can I find road tires that fit these rims?

@MarkBryanRC Жыл бұрын

Hi Cooper - you can fit the standard Tamiya road tyres, they are widely available, here is the product name and no: Tamiya (part number 50419) Racing Radial Tires 2 Pcs (26mm) I don't know where in the world you are, but you should be able to google a store that stocks them near you. All the best!

@coopersharp2921 Жыл бұрын

@@MarkBryanRC that is just what I am looking for! Thanks, I really appreciate it👍

@MarkBryanRC Жыл бұрын

@@coopersharp2921 No worries, glad I could help! 😉👍

@takenotez808 7 ай бұрын

If using two servos do I do both the same time or one at a time?

@MarkBryanRC 7 ай бұрын

I think the only way to fit 2 servos is to fit one on each axle so that would be one at a time! 😎👍

@bgesmomie Ай бұрын

Asking for part numbers or links to purchase the not included items that are needed or or upgrades that work

@MarkBryanRC Ай бұрын

I think the only parts I upgraded were the metal bearings. I got them from rcbearings.co.uk

@ralphhowing3473 7 ай бұрын

I hope that isn't the radio you're using!!!!!!! Spectrum ALL THE WAY!!!!

@MarkBryanRC 7 ай бұрын

It sure is the radio I use, Ralph! I love my twin-sticks! 😅👍

@IowaBudgetRCBashers Жыл бұрын

Worst part of building the clod is those damned E clips

@MarkBryanRC Жыл бұрын

You got that right Thad, but it ain't so bad when you can just use the bench to pop them on! Cheers, dude!

@RCBirds Жыл бұрын

Nemesis🤣😉

@MarkBryanRC Жыл бұрын

@@RCBirds 🤣🤣😉😉👍👍

@IowaBudgetRCBashers Жыл бұрын

@@MarkBryanRC watching this again, mine is put together identical to this. I dunno what I’m doing wrong

@MarkBryanRC Жыл бұрын

@@IowaBudgetRCBashers Hi Thad, something crazy is going on, you put it together the same but your dogbone end e clip is not flush against the bearing like mine is. I think the e clip on the gearbox end must be in the wrong slot, other than that your kit must have come with wrong sized axle tubes!!!!!!