No video
I vapor polished the RS3M V5 - Modded RS3M V5 setup tutorial
Рет қаралды 5,092
4 ай бұрынThis was pretty fun.
I originally got this idea from @Megaminxcuber ; go check out their video!
• Turorial: How To * “MA...
----------------------------------------------------------
BGM:
• Protect the Smile! (FU...
• Atelier Suisei
Both of these songs are by Jeremy Robson; he makes some really epic orchestral remixes of Hololive members' songs.
• Khaim - Somebody | Lo-...
----------------------------------------------------------
Cube: modded rs3m v5
WCA Profile: www.worldcubea...
----------------------------------------------------------
Thanks for watching!
#speedcubing
@アックサ 4 ай бұрын
DISCLAIMER: I didn't mention this in the video, but acetone is a flammable substance, and the vapors that it gives off could be harmful if you breathe it in for too long. If you do end up vapor polishing a cube, I'd suggest doing it outdoors or in a well ventilated area with a mask on, away from any open flames. As long as you're careful and use common sense, acetone is pretty safe to work with; just make sure to wash it off of skin thoroughly after use, as prolonged contact can cause irritation.
@SkrittleCubing 4 ай бұрын
This worked out very nice for me and the cube still turns well. The coating is extremely similar to pvc coating or uv coating. I would be extra careful when handling the cube while it is still soft. Also do this in a well ventilated room breathe too much acetone and you will pass out. Do this with a new cube because the vapor polishing shows all the imperfections
@SierraRairse 4 ай бұрын
How long should i wait before doing another side??
@RubiksRonaldo 4 ай бұрын
Let's go! My boy MegaminxCuber is inspiring other cubers to vaper polish!
@Unlucky1776 4 ай бұрын
This is sick!! Im gonna have to try this when i get a new cube
@kaemonvita 4 ай бұрын
junior is makin it big
@cariyaputta 4 ай бұрын
I'm so afraid of handling acetone, could a spark be enough to ignite it?
@アックサ 4 ай бұрын
I know that acetone is flammable, but I also know that it's commonly used as nail polish remover (which is what I actually used), so as long as you're careful, you should be fine. I probably should've put a disclaimer in the video, but I'd recommend either vapor polishing outside or in a well ventilated area with a face mask on.
@アックサ 4 ай бұрын
A spark shouldn't be enough to ignite it (like from static electricity), but you shouldn't go using acetone anywhere near an open flame.
@catcuber4819 4 ай бұрын
proesst
@echo6509 4 ай бұрын
whats your compression settings bro? nice vid
@アックサ 4 ай бұрын
Compression setting is zero, with moderate tensions.
@HarrisonSmith-tw8be 2 ай бұрын
Is there a reason that you use 3 different lubricants? Do the 3 basically combine to be the average viscosity between the individual lubes or is there another reason for it?
@アックサ 2 ай бұрын
Each lubricant contributes in their own unique way; in this case, gravitas provides a smooth base lube for control, silk slows the cube down and enhances piece-to-piece contact, and xmt-10 creates a very nice soft feeling as well as boosting speed.
@HarrisonSmith-tw8be 2 ай бұрын
@@アックサ thanks for the info! That’s cool that they can work together like that, never knew that before
@jasonbest1 4 ай бұрын
What if you vapour polished a cube *after* the matte plastic has become glossy? Would it be even better? 🤔
@Anthony_Jiang 4 ай бұрын
No, all that happens is that it strips away the top layer it’d be the samw
@アックサ 4 ай бұрын
I haven't tried this yet but I'd assume it would be as @anthony_jiang said.
@CXLVII 4 ай бұрын
@@Anthony_JiangBro I just left Cube Chemists stream, crazy to see you here lmao
@Anthony_Jiang 4 ай бұрын
@@CXLVII lol
@andrejorge5857 4 ай бұрын
Why didn't you vapor polished the ball core one right away? Could it ruin something?
@アックサ 4 ай бұрын
The ballcore rs3m v5 has UV coating , so it would be redundant and also very damaging to vapor polish it.
@ishaanbansal1089 4 ай бұрын
Which do you think is better? UV coating or vapor polishing?
@アックサ 4 ай бұрын
UV coating feels smoother, and I think I prefer it a little more to vapor polishing, but I like the vapor polished modded standard rs3m v5 better than the stock ballcore because the standard has stronger magnets.
@ishaanbansal1089 4 ай бұрын
What about for big cubes?
@アックサ 4 ай бұрын
@@ishaanbansal1089 for big cubes I prefer normal glossy plastic over both uv and vapor polish
@genrexiii7239 4 ай бұрын
Will the cube polish wear off eventually??
@アックサ 4 ай бұрын
Nope! When the acetone vapor polishes the cube, the plastic itself melts and hardens, so the polish is permanent.
@positivity3311 4 ай бұрын
can you vapour polish uv cubes? and what happens if you do?
@アックサ 4 ай бұрын
I would not recommend vapor polishing a uv coated cube, as it would most likely destroy the finish and leave a bad texture.
@KuyaEyo 4 ай бұрын
Can i use nail polish remover that contains aceton?
@アックサ 4 ай бұрын
Yes, in fact that's actually what I used here.
@SkrittleCubing 4 ай бұрын
How long should I let the cube rest?
@アックサ 4 ай бұрын
I'd say about 10ish minutes, though you can do a little longer to be on the safe side.
Turorial: How To * “MAGIC CLOTHES” * (Vapor Polish) ANY Rubik’s Cube (10x10 Rubik’s Cube Example)!!!
Megaminx cuber: Junior Solis
Рет қаралды 2,4 М.