I Went To The Erebus Factory And I Was SHOCKED By What I Saw!

Рет қаралды 69,559

6 ай бұрын

CHECK OUT THE EREBUS RANGE HERE!
erebuswatches.com/
CHECK OUT THE BEST OF ALIEXPRESS - PAGANI, SAN MARTIN AND SEA-GULL!
jomw.link/ali-pagani-official
jomw.link/ali-san-martin-offi...
jomw.link/ali-sea-gull-official
THESE ARE MY TOP 20 RECOMMENDATIONS FROM JOMASHOP!
jomw.link/jomashop-top-20
SEE MY SELECTION OF TOP VALUE WATCHES AND ACCESSORIES ON AMAZON!
jomw.link/amazon
USE THE CODE ‘JOMW10’ FOR 10% OFF ANY PHOIBOS!
jomw.link/phoibos
USE THE CODE ‘JOMW20’ FOR 20% OFF ANY XERIC!
jomw.link/xeric
YOU CAN NOW HELP OUT THE CHANNEL BY BECOMING A PATRON! THANKS!
jomw.link/patreon
(The Small Print: Some of the above links are affiliate links. I am an Amazon, Phoibos, Spinnaker, Xeric, eBay, Jomashop, Kogan, Meranom, and AliExpress Associate. If you make a qualifying purchase, I am paid a small finder’s fee from the companies in question. You don’t pay any extra for the product. Thanks!)
This trip could have been a total disaster, but it just wasn't. We were both pleasantly surprised by just how professional everything was and how nicely our/your Erebus Origins are coming along so far. We are serious about making Erebus a success, and I think this demonstrated that to our production partner, and hopefully to any doubters watching. Roll on 2024! Cheers, Jody

Пікірлер: 632

@niksoncutts 6 ай бұрын

I really love how you aren't shy about showing that the watches are proudly made in a factory in China, they look incredible!

@serenityinside1 Ай бұрын

Why should he be ?

@EsoRimerCz 25 күн бұрын

@@serenityinside1 Because every watch youtuber says: "Do not buy cheap/fashion watches, they are all the same - produced in china, only thing witch changes is the logo"

@johnm9285 6 ай бұрын

Jody, I think it’s great that you showed this business and the professionals that work in it in a suitably favorable light. So many times “Chinese” has meant low quality, and it’s nice to see professional people making a good product

@spencemiller9301 6 ай бұрын

Fascinating. I too thought the factory would be somewhat less professional, or perhaps just more concentrated on speed versus quality control. But these guys are impressive. Erebus just went up a few notches in my book. I bought one because of you Jody ... I'll stay for the quality!

@HansWatches 6 ай бұрын

Glad to see the launch was a success, and that your choice of watchmaker was well thought through. Also good to see you busting some China factory "myths". Well done!

@joshsteuterman2363 Ай бұрын

I watch A LOT of watch shows, more than anyone should, and this is the first factory tour I have ever seen. Thanks for the video!!!!

@thenotanclan 6 ай бұрын

Mate after all your efforts and continued endless enthusiasm (esp after the whole channel being taken down a couple of years ago) you whole heartedly deserve this

@Harisampath 2 ай бұрын

Why was his channel taken down ?

@cy9nvs Ай бұрын

This is looking very nice indeed. Been saying for a long time that Chinese products often are much better than we give them credit for. I work for a German heat pump manufacturer, doing the final testing and quality control, and we also sometimes get units that are built in China to inspect. The wiring and attention to detail on those is just so much better than anything I've ever seen produced here in our factory.

@dantealighieri4258 6 ай бұрын

Great video. As a foreigner living in China (and watch fan of course!) I'm glad to see you put the factory work out into the world in public. It's always sad to see so many comments about Chinese manufacturing and insinuations of exploitation when there's people here working hard to produce good products and just make a living. Also, the entire microbrand industry relies on factories similar to these and it's always seemed to me a bit of a weird aspect of the industry that no one openly talks about the actual manufacturing - so thank you for putting it out there! Of course, it only increases the trust in the brand as well :)

@Horizontalvertigo 6 ай бұрын

I mean, there's definitely exploitation happening in China, but it's not just a China problem and that fact shouldn't be seen as a cudgel to denigrate good quality workmanship and professionalism that is as present in China as anywhere else.

@midgardlife 6 ай бұрын

I too dislike the hate towards Chinese manufacturing. I buy archery, fishing, watches, clothes and other products from china every month on average and im very pleased with what I get. I think some people are a bit etnocentric and in my country it is the norm in general, unfortunately.

@timmytim1954 6 ай бұрын

Very envious. A Very Merry Christmas and may the New Year bring you the success you deserve.

@GM-ii8gs 6 ай бұрын

Good to see you using San Martin, the bloke on the front left in the assembly room has been there years.

@andreiprioteasa3193 5 ай бұрын

So that's the San Martin facility? Impressive!

@Sean88.. Ай бұрын

I just spotted that! This video came up when looking for a San Martin factory tour

@GavinKohAquascaping 6 ай бұрын

Glad to see the BTS of how good watches are made in good companies in China. Yes, would love to see you do more travel/watch reviews of watch factories and give us an insight behind all the marketing. What a great reveal!

@rarekid740 6 ай бұрын

Agreed, would love to see the factories where the parts are made next. Case and bracelet machine would be the most interesting for me, followed by dial and hands.

@DJXComputer 6 ай бұрын

I think this does a lot to further the image of professionalism in Chinese watch making that is it’s due. Can’t wait for my purple to Origin to get here!

@DarrenBates 6 ай бұрын

I've actually never been so excited for a watch I've ordered before 😅 I'm so impressed with your production partner; I wasn't expecting the likes of regulation and double pressure testing. Can't wait to have my black origin now ❤

@alphamrc309 5 ай бұрын

As an American engineer having lived in China for years (in two separate times of my life), I appreciated watching your factory walkthrough. Keep it up!

@vktravellog1242 2 ай бұрын

I been to shenzhen probably around 6 times. Its amazing how guangdong has grown from my first trip back in 2004. The factory parking lot back then was all bikes with maybe 1 car.

@wilderbeestmcc6539 6 ай бұрын

I’ve never seen a supplier do what you guys have done to reassure potential customers of quality…. You deserve to succeed 😃👍🇬🇧

@marksaxby607 6 ай бұрын

Great to see the care going into these watches. I agree about the widespread dismissal of NH3* movement Chinese watches. I read lots of comments saying "I wouldn't trust a Chinese watch in the washing up bowl, let alone on a dive", so I took 4 Steeldive sub-£100 watches diving and they all worked flawlessly. They all delivered sub 10s/d accuracy as well, which is more than you can sometimes say for far more expensive watches. Detractors, of course, will say I got lucky, but if nothing else, it proves that they're not all junk as many would have you believe. No matter what you think of the Chinese regime (and I'm no fan), Chinese factories can produce quality goods at excellent prices. I wish you all the best with the launch of the Origin and will watch future releases with great interest.

@LRSTGS 6 ай бұрын

@justonemorewatch Thank you for showing us this. You likely wont recall, but when you launched this I was one of the people who left a comment enquiring if you could speak to the working conditions in the factory. My concern was because the watch offers a lot for the money, which normally is at the cost of the people who make it. This level of transparency is fantastic. Makes me really motivated to buy one!

@StevenMRSenior 6 ай бұрын

I am impressed. I thought there would be more automation in the construction. My late partner and I had two weeks holiday in Hong Kong a few years ago and it was great. We were lucky enough to go when it was Chinese new year so the celebrations were fantastic. I remember the bamboo theatre was free and we were able to get tickets for a performance. A few days later we watched it being dismantled. Unbelievable.

@thetattedpharmacist3215 6 ай бұрын

Awesome to see the process, makes me that much more excited for my Purple Origin!! Thanks Jody & Steven for taking us along for the ride!

@AbdulRWatches 6 ай бұрын

Great to see you guys documenting the journey and the effort behind making the Erebus first watch 👍🏽👏🏼 Can't wait to get my yellow one 😁

@adk7962 6 ай бұрын

In three years time I expect no less than Mrs. JOMW to drop you off at the airport in her Aston Martin DBX to take the Erebus Corporate Jet to Honk Kong! Not that I had any doubts I would receive the watch, but this makes it so much more real. 👍🏼

@JustOneMoreWatch 6 ай бұрын

Ha! Mate, she'll still have that bloody Beetle. She adores it. Me, not so much!

@eggsII 6 ай бұрын

Fantastic work paring that visit to a 10-minute video! Did you have a plan going in knowing that you wanted to film a video? That’s great that your factory partners are willing to work with you in that way as well!

@MxRoski 6 ай бұрын

What amazing quality control - I had an Omega Seamaster Officially serviced in the uk and it had to go back 4-5 times - dust inside the case, scratches on the AR coating, etc. What professionalism. Im hoping one of your next watches will be a strong field watch with good WR - ill definitely be signing up for preorder for one of those.

@mamayl8592 6 ай бұрын

Yup. Looks like the production company has things dialed in. Pun intended. Lol.

@Cloxxki 6 ай бұрын

@@mamayl8592 It's a complication, but not an option when you want quality. I really tried with that pun.

@mamayl8592 6 ай бұрын

@@Cloxxki Lol.

@serenityinside1 Ай бұрын

@@Cloxxkilong as you didn’t wind anyone up , you’ve made your case !

@frederikaaxman1582 6 ай бұрын

So great to see recordings outside the studio, and very good to see factory tours as well. Keep them coming! And happy holidays from dark and rainy Denmark.

@shess412 6 ай бұрын

Fascinating to see the process and quality control going into each one. Looking forward to March!

@darkeye77 6 ай бұрын

Very cool video! The factory was indeed more clean and advanced than I would have thought. However, I would have loved to see where the actual parts are machined. Do they come from a variety of different places? Do you know how clean and controlled those environments are?

@dadmodswatches 6 ай бұрын

Thank you guys!! This was absolutely brilliant! Really helps the nerves for someone who is hoping to do the same in the future.

@shj2000 6 ай бұрын

Impressive! Thank you for the factory tour.

@adeanh1 5 ай бұрын

I bought an Erebus mainly to support you. Now that I see what goes into it, I am even more excited to get my hands on it! Also, I'm a knife collector and in the past decade, China has made huge improvements in quality manufacturing. I own a few Chinese knives and they are mainly my EDC's.

@JustOneMoreWatch 5 ай бұрын

Thanks mate! Delivering soon, we hope.

@j1d7s 6 ай бұрын

That was a real treat and a lot of fun to watch. It's the first time I have seen the place where one of my watches was or will be assembled. The factory exuded a lot of professionalism. Can't wait to have the watch on my wrist. Good luck with the next models, too!

@wieg86 6 ай бұрын

This os incredibly impressive. I didnt think the quality whould be this stellar. Looking forward to see my blue one arrive. Loving to see the insides of a facility like this, and the fact that my watch will be made here is amazing.

@robertmckinlay7242 6 ай бұрын

Good to see the assembly process, thanks to your good selves and the staff of the factory.

@lkdenve 6 ай бұрын

Incredible to get to see the watches made. I can’t wait to get mine in. Wonderful work, Jody, it’s been fantastic to watch this journey for you.

@JohnBuckmaster-sw3wm 4 ай бұрын

I don’t know how I missed this video and I am looking very forward to receiving my Jody watch! I’m flabbergasted I just tell professional this process is. Not at all what I would’ve expected.. I guess the most unexpected thing was the fact that they adjust the NH movement…. And not just in one position, but four!?!? And they pressure test it?! Wow… Just wow.

@chillausmc 6 ай бұрын

Yeah, a country that hires proffesionals to do a job. Im surprised most are surprised and many have misconceptions about China. Had your watch been made here in New Orleans, we would all be very cautious about quality control. Im glad yall took the time to us around. Saving up for an Erebus. TY

@westonraske8152 6 ай бұрын

Very impressive assembly and QC! Do they also manufacture the components at that location? Would love to see some molten steel being poured into moulds to make the cases or how the polishing is done. Or how the dials are made.

@johnholkham2420 2 ай бұрын

Suspect there are different part makers ie dials made one factory, case in another and bezel in another . All brought to assembly factory. This is how the likes of Christopher Ward do it apart from they use Swiss suppliers.

@mcidor 6 ай бұрын

Thank you for the tour. This really makes me excited to be receiving my watch in the coming months

@tc6578 6 ай бұрын

I am utterly surprised and impressed with the amount of efforts and resources the factory folks have put into making these watches. Thanks for the factory tour. It was certainly an eye-opening experience for me.

@matthewward3854 6 ай бұрын

Brilliant video, Jody. I grinned the whole way through and am glad you and Mr P enjoyed your wolly (work jolly). I can't wait to receive my 3(!) Erebus watches in 2024. Seeing the manufacturing process makes my purchases feel even more special; so thank you for that. I hope you and your family have a great Christmas.

@kimboofdzners9574 6 ай бұрын

Great tour, ty!

@davidbellamy1403 6 ай бұрын

Glad your tour want well. Thanks for showing us the conditions in this factory.

@GraphicDesignerStephen 6 ай бұрын

Great video, Jody! To get to see the watches being so meticulously assembled and tested was inspiring. Knowing my watch is being handled with such care and craftsmanship means I’m all the more excited for delivery. Come on March!

@WATCHingJames 5 ай бұрын

Fantastic to see this one. Thanks Jody

@martinkavanagh196 6 ай бұрын

When i was in my 20's I believed that success was logical and that if I supplied Good Service, Good Product, & Good Value ... I'd be on my way. But I was ignorant of the need for Good Marketing - otherwise nobody knows or cares that you exist eh. Well Done Jody.

@AndrewsCoolStuff 6 ай бұрын

Congrats, Jody and Mr. P! I can see the pride in your eyes as you watch your dream come true. Here’s to you, the Origin, and more successes to come!

@Razor_Burn 6 ай бұрын

Thankjs for the update gents and so happy for you both... Happy Holidays!

@johnsmith-gs4qf 6 ай бұрын

The quality control looks impressive. It reminds me of the quality control at a computer chip production plant.

@alma175w 6 ай бұрын

Congratulations again on the successful launch! Fantastic travelogue on the new company, and impressive to see how the watches come together.

@johnrb9397 6 ай бұрын

Very impressed Jody. Yes it does feel one with confidence especially seeing the regulation, the dial alignment process and the two stage water testing. Do the watches get sent with a regulation result receipt? Great stuff. Looking forward to seeing what future designs you come up with hopefully one appealing to me!! Tc

@luykenstouten1145 6 ай бұрын

Great fun and interesting to get this inside tour! Thanks guys! 🙏🏻🤟🏻

@aSlimtube 6 ай бұрын

Thanks for taking us along. As if I was not already stoked to receive mine!!

@benanthony3985 6 ай бұрын

Once again proving that China can make some very great products. Excellent choice in manufacturing and I’m very happy for your watch making success!

@chronocommander007 6 ай бұрын

Thanks for the look behind the scenes. Looks like an efficient and clean operation.

@JeremyChan-bk4gx 6 ай бұрын

Coming from Hong Kong, I am super impressed by the factory set up and feel that my Erebus Origin is worth so much more with all the TLC.. Kudos to the team for putting this together! ❤❤❤

@rayharrison6400 6 ай бұрын

Great insight into the factory seldom seen. Very impressive.

@dennisalonso1029 6 ай бұрын

Fantastic. Thanks for taking us along.

@bradentraub 6 ай бұрын

This was so fascinating! Thanks for the behind-the-scenes look.

@BennyLlama 6 ай бұрын

What a great video. It was so cool to see how a watch is made. I can't wait to see what Erabus has in store for us next

@ivoshandor6859 Ай бұрын

*Erebus

@googolplex1 5 ай бұрын

Excellent bro. Thank you for being so open!

@NeilStirton 6 ай бұрын

Loved seeing this, thanks Jody!

@bravowhiskey4684 6 ай бұрын

Why would you have a shop in duty-free and not sell? Rolex is so ridiculous 🙄

@JustOneMoreWatch 6 ай бұрын

Just adds to the hype, I guess. At least they had stuff in the display cabinets. I remember a few years ago going into a Roelx store in Sydney and the assistant was letting people try on his 41mm DJ because they had no stock. Shameful situation for all concerned!

@BennyLlama 6 ай бұрын

There are business travelers that fly so often that they can get to know the staff and get put on the list for a model. Just like a regular store

@leonidaslantz5249 6 ай бұрын

Rolex , a watch to show others how rich you are........yet a watch with a Myiota 9015 is more accurate. 👌

@BennyLlama 6 ай бұрын

@leonidaslantz5249 more accurate? Maybe if it's well regulated. My dad's Rolex gains about a second a day. None of my Miyotas run that well. Only my Omega Seamaster gets anywhere close. Hate on Rolex for the games their ADs play or their price, but don't act like they don't make a phenomenal watch

@diydad7704 6 ай бұрын

@@leonidaslantz5249 Not a big fan of Rolex because of the well known availability issues and lame designs. Apart from that i'm pretty sure they can regulate their watches to be at least as precise as a Miyota9015 driven piece.

@Sparrowaim 6 ай бұрын

Loved this vid. Brings a lot of authority on the field. Crystal clear brand work. Congrats!

@jlore6344 6 ай бұрын

We like to see you “unleashed” from the studio. This was great. Wow! What a cool factory. Your watches just rose quite a few spots in my wish list.

@mudson7380 6 ай бұрын

Not gonna lie, I’m positively salivating for that white dialed Erebus. This was a cool video. Glad to see you enjoying a measure of success on this. 🙂

@droid1appmkr 6 ай бұрын

Same. Plan to pick upone eventually myself.

@kirk09100 6 ай бұрын

So happy for you mate!! Continue living your dream and thank you for sharing it!!!

@NicolasLakoff 6 ай бұрын

I really enjoyed this video Jody and I'm so looking forward to seeing the next models! Cheers!

@fredochinaski9968 6 ай бұрын

Jody, fantastic épisode, people that buy from micro brands, must bé reassure by know, again what a process, what an épisode...for a watch youtube Channel, all my best Frédéric Paris France.

@hiker1392 6 ай бұрын

Interesting video and I’m glad the factory is working out so well for you. And no, I have no experience with watch assembly, but I thought reviewing the build process and quality control functions is something you would do prior to offering the product for sale? Unless you had a business partner on site who was able to do for you? That part wasn’t made clear in your video. So luckily or on purpose, the production line is providing a good product and a solid start to your company. To your continued success. 🍻

@timetowatch_francois 5 ай бұрын

Bravo Erebus Team!! 👏🏼😁 I truly hope you have continued success for many, many years to come. You're off to a good start anyways! Thanks for the tour.

@fergiet18 6 ай бұрын

Well done guys, great video of your inspection trip. Really good to see the professional approach to watch assembly it fills me with confidence so you two must be really pleased. It's a good sign hat they are happy to show you around and let you film what was taking place. 👍

@WatchMalaya 5 ай бұрын

I’m impressed! Looking forward to see your reviews on the new piece. Congratulations!

@nedflanders3769 6 ай бұрын

Wow I’m impressed. They’re not fucking around! And it’s not a sweat shop! 😊

@regorschneid5245 6 ай бұрын

Very exciting to see the watches coming together, great video! I've been doing a bit of wishing I'd gone with the yellow dial but seeing the tray of reds, I'm pleased with my choice. Black has always been my go-to so the red will be a real stand out.

@leejenkinson5521 5 ай бұрын

one of the best watch videos in ages, and should be done by other watch brands more often. Thankyou for SHARING this with us!

@ghostofzuul 6 ай бұрын

that's WAY COOL that you got to go to the factory and check it out.... it looks about as professional as you can get... lab coats and the whole 9 yards! my guess is you breathed a heavy sigh of relief when you saw how dialed in everything is. big fan of Jody-out-of-the-house vLogs. thanks jody! cheers!

@matthewcolling266 6 ай бұрын

Fantastic to see what goes on behind the scenes with your watches in production. They look great and very diligently put together. All the best to you and Steven 👍

@mocha8232 5 ай бұрын

Seiko.... Seiko! Are you seeing this? The QC on alignments and accuracy... come on Seiko!

@BenNS1971 6 ай бұрын

Loved the video. Great change of pace.

@iFyvie 6 ай бұрын

Super cool video! Thanks for sharing Jody. Now, hurry up and show us the next Erebus model.

@kolbe4373 6 ай бұрын

Most interesting to see! Looks very professional indeed. Good to see that they take regulation and QC very seriously. Congrats, Jody!

@sabr77 6 ай бұрын

Stellar. Congratulations on your initial success and good luck with future models.

@boombringer4078 5 ай бұрын

This was a real treat! Thanks Jody!!

@Kevinjimtheone 6 ай бұрын

The most important part was them checking the articulation of every link and each individual screw. Great video. I hope Erebus becomes available from EU sales, too.

@Cloxxki 6 ай бұрын

And it only makes sense when the bracelet production itself is up there with its tolerances. I have a few China specials, and the bracelets may look and feel great..until the watch just falls of the wrist, or the clasp won't open again. Self unscrewing looseners.

@brinx8634 6 ай бұрын

Those kids work in a pretty damn fancy sweatshop! 👍👍👍 Good video.

@JF-lt5zc 6 ай бұрын

Very pleased to see the quality control going into these watches. Can't wait to receive my teal in March!

@robberlin2230 6 ай бұрын

Congratulations and what a way to celebrate, you could have bought another something but chose to take us on a journey with you. Thanks for the video I really enjoyed seeing what inside a Hong Kong manufacturer is like but most of all enjoyed your smile, you look so happy it is a joy to see.

@ae-ca602 6 ай бұрын

This is fantastic! Thanks Jody for sharing this part of your awesome journey. Can't wait to get my blue one. I have a feeling that the next Erebus will be a field watch.😉

@robertpettigrew9042 6 ай бұрын

Very cool, not what I expected at all when you hear/think about a Chinese factory

@JustOneMoreWatch 6 ай бұрын

Me neither. At all!

@alfieakaronaldog 6 ай бұрын

Fantastic video and insight. Well done guys ✊🏻

@ChristyOFaghan 6 ай бұрын

fascinating - loved the airlocks and was pleasantly surprised to see pressure testing on each model

@bengalvin71 6 ай бұрын

I’m so happy for you Jody. I will have to save up for one of your lovely watches. Really good to see the QC and production processes. Will you stick with the venerable NH35 or will you go for high beat options in future?

@giancarloliucci4104 6 ай бұрын

Beh!!! Ottimo video che sono stato contento di visionare. Bella immagine di professionalità. In bocca al lupo per i tuoi progetti industriali. 😂😂😂 Ricorda di essere colui che mi ha dato la spinta definitiva a farmi acquistare il mio GMT di Cronos😂😂 ...

@maddog6537 6 ай бұрын

Very Cool, thanks for sharing. All of the QC inspections were impressive, I'm very glad that I invested. Looking forward to the next designs.

@PheasantPluckersMate 6 ай бұрын

Loved this, Jody. A real education for us microbrand consumers! So pleased for your success and looking forward to future releases🎉

@dv5191 4 ай бұрын

Great video! Thanks for sharing and congrats on your success.

@insanity6105 6 ай бұрын

Wow, great video. Very interesting how they put those watches together and QC them

@ramblin1209 6 ай бұрын

Congrats! You deserve it 🎉

@markinjhawkland724 6 ай бұрын

Would love to see an Erebus tee shirt with “You’re not on holiday until you’ve been on a boat “!!!

@williamziegwied4207 6 ай бұрын

Great to see the launch off to such a great start and, for someone who has purchased an Origin, I appreciate all the production background… I frankly have not seen this with other Microbrands. 👍