Thanks so much, really appreciate that. it has been a while but I try my best to make it more often. Thanks for taking the time. Always appreciated.rich

Thanks Jesse, was a nightmare when it stopped working after updating. Rich

@@SURGE101 I needed this to work, since my JC P7 was also not working haha

😂😂I ended up changing it because there way too many ‘micro-repairs’ on here.😂, thinking about it ,the download link I showed in the video may of only worked because the opera browser I was using has a built in VPN. Glad there was a work around. Appreciate you taking the time. Thanks Rich

Ah yes the words Micro & Repairs do seem to show them self's a great deal in electronics. I honestly think the name you have gone with fits well. I tried to download the software via Chrome & Firefox with VPN on then i turned it off and still got the same blocked message. I did post the Link that included the IP to the software so i guess YT was right to delete it 😂

@@Ratchet_effect 😂😂thanks, not sure why that’s happening but I’ll have a look and see if I can get a better link, I’ll try and post a link to it in the description. I2c programmers are good for the money but the software a nightmare 😂

The software for this programmer is so buggy that problems seem to arise from every update they release almost. One thing to try with the latest update, is to uninstall both of the programs from the computer completely. Then download the latest i2c platform program (the original one that’s shown in the beginning of this video). Then select p14 pro on the top left corner within the program itself (on the updated version of the platform )it will then download the latest version of the p14 pro platform shown later on in the video. Because it’s downloaded through the platform rather than the link it should work then. It’s a good programmer when it works but the software a nightmare unfortunately, the software updates are so buggy it almost makes it completely unusable at times. But hopefully that works for you as that’s how I managed to fix the latest issues. I’ll do an updated video soon on. Thanks rich

Hi I’ve done a more up to date video about this programmer, please check my latest video. Thanks rich

Hi to solve this issue you need to download and install the drivers from i2c. You can do this by opening the i2c platform and you will find the drivers in the the menu. Once installed it should recognise the programmer inside the software. If it opens the drivers and not installing the drivers when you try to, you may have to disable ‘driver enforcement’ inside windows to install. This is because windows sometimes stops you installing drivers that are not digitally certified by Microsoft . Hope this helps. Thanks rich.

Try a different usb type c cable The one it cones with sometimes does not work Had same problem and changing cable worked

Hi any device that’s a10 cpu or lower , the nand can be read or modified using the purple mode function which doesn’t require nand removal. Any newer the nand will have to be removed to read or modify etc. when first setting up, download the i2c platform software and then select the p14 pro section. This will then install the p14 pro software for you. Then plug the programmer into the computer. Then on the software select drivers from the menu. Once you’ve installed the drivers the programmer will appear in the software for use. It won’t work unless you install the drivers. Thanks rich

Yes it has all the same options as the regular app, it has all the preset nand SYSCFG for all the models. When you select the model you can auto fill the data. Thanks rich

That’s a good question because I had server issues with the jc programmer p11. If the server down you can’t use it. Yes you can use it offline but within the i2c platform on the pc but certain functions like querying and purple mode need a connection. But to read and write , can be done offline. Thanks rich

It’s most likely the drivers for the programmer haven’t been installed. Along the top of the software platform there should be a drop down menu and then select drivers. Once you’ve installed the drivers it should work for you. Rich

Hola, puedes actualizar tu programador conectándote a la computadora y luego abriendo la plataforma de software i2c p14 pro. en la parte superior hay un símbolo de flecha grande llamado "actualización del dispositivo". Si hace clic aquí, actualizará el firmware del programador al firmware más reciente. Con suerte, esto resolverá los problemas que ha estado teniendo. gracias rico

@@SURGE101 muy agradecido por responderme !…. Pero lo e intentado varías veces y no me actualiza la programadora 🥹

@@JHONNY徐杰尼 Intentaré encontrar una solución para usted. Normalmente debería actualizar el firmware de esa manera, no estoy seguro de por qué no funciona. Podría ser un dispositivo defectuoso, pero intentaré encontrar otra manera. gracias rico

@@SURGE101 saludos ya hable con la gente de soporte y listo cuando se hace un formateo profundo hay que colocar la nand de nuevo en placa para que haga las particiones y luego bajar y volver a montar, asi se recupera la informacion de la nand o board.... y lo otro es que si no quieres formatear a nivel cero o low, entonces se escribe una configuracion generica generada por la misma unidad y desde alli se puede borrar o hacer lo que desee dependiendo del caso,,,,, es muy rapida esta programadora ..... gracias por ayudar

Try again in a while, it may just be the server down. Or delete all your browser history and then try. May be an installed cookie problem.

@@SURGE101 I can't find P14 Pro only i2c assistan v4

@@hossamhrmobilerepair3656 i2c have updated the platform since this video, if you download and install the i2c assistant and then once you have created an account and signed in , select the p14 pro in the top left corner. It then install the p14 pro software for you and will open automatically through selecting it in the i2c assistant platform.

Try cleaning the pads of the nand, it may be the pins in the programmer are not making a good connection.

@@SURGE101 tried 3 nands same thing, might be the programmer itself being faulty. It detects the nand but cannot program

@@darriencriag2328 push the plastic down inside the programmer to reveal the pins inside the programmer and check they all come out properly and also cleaning the pins inside the programmer may solve this as it may be some dirt or something stopping the pins making a good connection with the nands.

Thanks for your input Yes I have tried that, even disassembled and reassembled the programmer

@@darriencriag2328 I’ll try and find out a solution for you and ask around . It may be a fault with the programmer. Unfortunately I’m not sure what could cause this to be honest but I’ll try and find out for you.