This was the exact review and tutorial I was looking for and that I have ordered I bell ID 13 - 75. Which is a keyed chuk. I as to me it more convenient than key less. Rest all viz. Powe 650 watt, Rpm all are same. Hope I took a fair decision. Pls comment.
@MECHTOYSOFFICIAL Жыл бұрын
I think it's good decision. While working with concrete and metal, i experienced the drill bit getting loose by itself in keyless chuck. Keyed chuck is better for metal and concrete works. For frequent changing of bits I chose keyless chuck. Back then keyed chuck model wasn't available, i think recently they launched it.
@trivian72404 жыл бұрын
Very good review
@MECHTOYSOFFICIAL4 жыл бұрын
Thank you friend🤗♥️
@manojpant4900 Жыл бұрын
For home use which should I buy ibell or bosch
@jbsaviorsramtea18042 жыл бұрын
Nice review sir. Does it's still work good after a year,, Do you recommended for us ,for concrete drill.
@MECHTOYSOFFICIAL2 жыл бұрын
Thanks 🤗❤️. The drill is still functioning well after a year, I changed its cable coz i mistakenly damaged it. If you have heavy concrete drilling need then go for a rotary hammer drill. The drill I've reviewed is good for medium and light duty works for home and diy needs. I've used it for some medium level concrete drilling works such as installation of exhaust fans, etc...
@jbsaviorsramtea18042 жыл бұрын
@@MECHTOYSOFFICIAL thanks sir. Then, i hope it will be good enough for households works,, about cement wall too, , cause , household is not too heavy works.
@lukmanlukmance4 жыл бұрын
Gud
@MECHTOYSOFFICIAL4 жыл бұрын
Thank You
@tochruby4 жыл бұрын
Your videos are very helpful..👍.... Is the tool kit available at cheaper rate online or direct from shop?
@MECHTOYSOFFICIAL4 жыл бұрын
Thank you for the feedback. In my experience,the toolkit is cheaper online when compared to shops. Cross check Flipkart and amazon, choose the best deal
@bas22vids973 жыл бұрын
Is there separate drill bit for concrete , wood and metal ?? If is there, then tell me how to identify them ..
@MECHTOYSOFFICIAL3 жыл бұрын
Yes they are different. Hardness is different for metal, concrete and wood drilling bits. A woodworking bit will wear off quickly on metal or concrete. They differ in flute shape, metal drilling bits are more shiny than woodworking bit or concrete bits. You'll understand once you start using them. Concrete bits don't have fine sharp ends like of metal bits and wood working bits as they're designed for impact drilling function
@antonyraj.c79503 жыл бұрын
Nice review. which is best bro keyless or keyed?
@MECHTOYSOFFICIAL3 жыл бұрын
For quick drill bit change keyless is convenient. But drill bit get loosen after few mins of drilling especially metals. In wood working and concrete it's not an issue. In keyed chucks you can tighten it as your wish, keyless only hand tight.
@muneebmurtaza68672 жыл бұрын
There are some reviews showing lot of sparks in this drill plz help
@MECHTOYSOFFICIAL2 жыл бұрын
Yes sparks are visible, but that didn't affected its functionality though. I'll make a video on that, its due to carbon brush surface wear, and free play of carbon brush, And the plastic body vents make the sparks visible.
@rambabupandrekala9373 жыл бұрын
Sparking inside of drill mechine is it common or any problem
@MECHTOYSOFFICIAL3 жыл бұрын
Yes it's normal. Happens with any brushed motor. You can observe similar sparks through the vent holes of a mixer grinder.
@motheswabhanreddy5419 Жыл бұрын
bro are you getting any sparks while using it at high speed
@MECHTOYSOFFICIAL Жыл бұрын
Yes
@motheswabhanreddy5419 Жыл бұрын
@@MECHTOYSOFFICIAL but is it safe to use
@MECHTOYSOFFICIAL Жыл бұрын
Yes safe, but never use near inflammable substances like lpg cylinders, paint solvents, fuels,etc. Avoid usage near water or with wet hands.
@tarunandotra31623 жыл бұрын
It's lock switch is not working for me or I am doing ti wrong?
@MECHTOYSOFFICIAL3 жыл бұрын
First press the trigger, then lock switch. Then rotate the small dial clockwise.
@roufwani9128 Жыл бұрын
Not poor, worst. My 2 steel bits broke down in the matter of 5 mins
@rajendrasipai16063 жыл бұрын
While drilling Should we use normal mode for Concrete walls....
@MECHTOYSOFFICIAL3 жыл бұрын
Use only impact mode on concrete walls, otherwise it won't drill fast
@rajendrasipai16063 жыл бұрын
@@MECHTOYSOFFICIAL Yes bro After watching your video... I have tried now it's working fine....
@MECHTOYSOFFICIAL3 жыл бұрын
Glad ❤️😊👍
@rahulsadankar85894 жыл бұрын
V can add glass drell in it ?
@MECHTOYSOFFICIAL4 жыл бұрын
Yes, by using diamond coated core bits along with proper water cooling you can drill into glass, marble,etc
@dbasumatarybasumatary7243 жыл бұрын
Bro 20mm wood ko hole kar sakega pls reply me
@MECHTOYSOFFICIAL3 жыл бұрын
Yes bro, you can drill 20mm hole in wood using either a spade bit, circular saw blade, or fostner bit. They're available in tool hardware shops.
@dbasumatarybasumatary7243 жыл бұрын
Chuck available hoga
@bhaitanveer78484 жыл бұрын
Maximum kitnay mm bit used kar saktay hai
@MECHTOYSOFFICIAL4 жыл бұрын
13mm
@mohammedriyas.b55093 жыл бұрын
Bro this is machine is good for screw driving applications?
@MECHTOYSOFFICIAL3 жыл бұрын
It's a general purpose drill, not specifically designed for screw driving. There's no torque control clutch. So if u push trigger too much, it'll give excess torque, and may wear out screw heads. It can be used though. Go for an impact driver if your only application is driving screws. Impact drivers offer better control of torque
@indiasdjnan85794 жыл бұрын
I was expecting the how to fit bit in machine, today i got my order this machine. And still i confused for how to fit bit in machine and excite for use. 😥
@MECHTOYSOFFICIAL4 жыл бұрын
Its easy bro, just turn the black part of chuck holding the chuck base. Never use SDS drill bits, some people unknowingly use sds, they will damage the chuck and also slips off everytime.
@indiasdjnan85794 жыл бұрын
@@MECHTOYSOFFICIAL thanks for help me, but is it china model? 1 of my building friend was telling me that its china model of ibell drill machine.
@pramodbaliga5934 жыл бұрын
What is minimum bit can be used
@MECHTOYSOFFICIAL4 жыл бұрын
I've used 3mm and above, but i guess a 2mm diameter drill bit is also compatible
@pramodbaliga5934 жыл бұрын
@@MECHTOYSOFFICIAL Also what is length of cable Am confused with Bosch model and ibell. I don't have price constrains.
@MECHTOYSOFFICIAL4 жыл бұрын
If price isn't an issue, Bosch GSB 13 RE gives almost same specs
@pramodbaliga5934 жыл бұрын
@@MECHTOYSOFFICIAL What is cable length in Bosch and ibell
@pramodbaliga5934 жыл бұрын
@@MECHTOYSOFFICIAL Bosch GSB 13 Re is possible for concrete drilling
@ABCD-cw3fs2 жыл бұрын
Which language are you speaking,, you are using English words,,, please make video in English or with English subtitles
@MECHTOYSOFFICIAL2 жыл бұрын
I'm speaking french🙂
@antonyraj.c79503 жыл бұрын
Hi bro. There is Spark inside drill machine while using it. Is it normal?
@MECHTOYSOFFICIAL3 жыл бұрын
Yes bro, it's normal
@antonyraj.c79503 жыл бұрын
@@MECHTOYSOFFICIAL Bro. I called ibell customer care. They are telling to use it for three days. Even after that if there is Spark, they told to return it.
@MECHTOYSOFFICIAL3 жыл бұрын
Expensive drills hide it better such as Bosch, makita,etc. In iBell's minimal body, sparks can be seen, it's not a problem unless it's causing any performance issues, weird noise, electric shock,etc... There can be manufacturing defects too, observe it...and if it's a problem then Return.
@antonyraj.c79503 жыл бұрын
@@MECHTOYSOFFICIAL ok bro. Thanks
@brucekent74423 жыл бұрын
Its costing 1000/- more now.I am never able to use the screw unscrew mode properly.😭😭😭😭
@MECHTOYSOFFICIAL3 жыл бұрын
What happened?
@brucekent74423 жыл бұрын
@@MECHTOYSOFFICIAL Sorry For the late reply. It Just jumps all ove the place while trying to tighten a screw or loosen it. Any pointers?
@MECHTOYSOFFICIAL3 жыл бұрын
You mean the triger switch is not in precise control? Like sudden spike in power than you applied? Or the chuck has eccentricity (wobling )?
@brucekent74423 жыл бұрын
@@MECHTOYSOFFICIAL Actually more like extra power...but wait?? Does the Chuck of Ibell get wobbely ??? I mean is this like a generic fault.
@MECHTOYSOFFICIAL3 жыл бұрын
No. Every drill has main bearing on spindle shaft. Depending upon the usages it wears out over time and cause wobbling like motion, excessive vibrations etc. My drill has no wobling issues yet.
@sebinsk3 жыл бұрын
Made in china
@upscaspirantdreamias29673 жыл бұрын
yah drill machine ka box bahut hi bekar hai yah Maine Manga tha to mujhe yah pasand bilkul nahin aaya kyunki iski bich Tut gai hai aur mujhe bilkul bhi achcha nahin lagaya box to aap video per Vishwas Na karke aur is video ko yah is message ko like Karen aur aap log yah Gaur kariye ki main box mar gaya tha maine video upload bhi kiye per mujhe box bilkul achcha nahin Laga hai to use
@MECHTOYSOFFICIAL3 жыл бұрын
My box is still fine. Quality isn't top notch, but just fine for the price. You could return the product in 10 days🤷🏻♂️ drill bit quality i already said in the video that isn't good.