This worked for our Frigidaire ice maker. THANK YOU!!!!!!! Also appreciate that it took you ONE minute to tell us how to do it. Super cheers with my ice cold drink to you!!

Thanks! It worked! I have a Whynter, 3 yrs old, and love it. Didn't want to buy a new one yet!

I recovered an Igloo brand countertop ice maker from a rental property. It looked practically brand new so I was tickled to get it. When I filled it up and plugged it in I was immediately let down. Before I went to toss this thing I did a quick google search and landed on your video. Tried the trick and it worked! I am so grateful. Thank you so so much!

Thank you so much! I bought an ice maker from a liquidation store for $50 and was bummed when the ice full error showed up! Your tip cleared the error and now it works perfectly!! Yay for ice lol

Omg thank you so much. I was so upset when my ice maker wasn't working when I woke up this morning. I have only had it about 6 months was a wedding gift. And I need ice. Your trick worked. Thank you

It is around 84 to 93 degrees fahrenheit here in Germany for weeks now and our icemaker broke done today. My wife was like OMG ! Thank you so much for this video, it surely safed our lives or at least our drinks ;-)

You are amazing. You have been helping people since March 21, 2017. And today I'm feeling blessed. Thanks for video. God bless.

IT WORKS!!!! I have an RCA ice maker (similar to the one in the video) and I tried the tip he gave and it worked! I wish I had known about this before. This is my 2nd ice maker. The first one did the same thing. I thought I had tried everything - even fighting with the MFG to return it- which would have cost $65 just to ship it! I am definitely sharing this with my friends! Thank you!

This worked!! We've been going without for weeks and this was so quick. Thank you!

Bless your soul. Thank you so much for making this video! I have been on ice withdrawal lol.

Thank you so much, we have an ice maker and after watching this video I was able to fix ours. Couldn’t figure out what was wrong until I watched this.

Wow that worked! Ive been searching and searching how to fix my ice machine so I didnt have to by another. Thanks for the post!

Omg it worked!!! I’ve had this issue for over a year and I usually unplug it for a while. That stopped working. This is a fast and easy fix. Thank You✨✨

Dude what the heck thank you so much! Mine has been saying ice full for a while now and we couldn’t get it going again, now it’s going! You’re awesome!!

Thank you! Worked on my Frigidaire ice maker. You saved me $100 buying another ice maker. I’ll use it this way until it completely breaks. 😊

Thanks so much!😁 That worked.... my igloo is running again. U think they'd put that on the Troubleshooting page in their instructions manual or like a Reset button or something! That expensive machine is such a life saver in this hot environment I live in.

Perfect! Not an electrical type of person. I accidentally did this to the Tramontina ice maker, and it worked. Best advice!

Thank you so much! You saved me from throwing out a perfectly good machine. You get the hero of the day award! ❤

Bought a $25 machine at a garage sale. First few runs worked great then it gave me this lught wouldnt you know this trick worked!!!!!! I can't believe it. Thabk you!!!

Just got an ice maker on sale at walmart and this problem was happening. Thank you for saving me from a trip back there to return it!

I just moved and downsized and had to lose out on having an ice maker and your video save me with buying this portable one

My Frigidaire ice machine does the same thing. And it looks EXACTLY like this one. Obviously some company is making these, and selling them to different companies to put their own name in it. Thank You, worked like a charm.

Woohoo! You fixed our ice emergency! Thank you!

It worked, thank you! I have an igloo and the sensor that shuts the ice down when it gets full went out. So the fact it will over fill is fine with me as long as it is making ice. Thanks again for making this video!

On/off button 10 secs on Fridgaire ice maker. Worked like a charm. Thank you!!

Jay Kay I did what you said and BAM just like that it worked perfectly. Thank you for this video. Keep up the good work.

You saved the ice machine I was about to trash. I cannot thank you enough!!!

Thank you so much! Our freezer has an ice dispenser but we dont have a waterline for it. Our countertop ice machine is how we keep it full and I was having this same problem. It's working now! :)

Thank you sooo much was about to walk to the store and grab a bag of ice but did this and wa la!Back making ice thanks again😊

Wow so glad I found your video I was about to trash the machine! It worked!! I am so grateful!

Trying it now. I've had 'ice emergencies' for about a year now. Thanks for the tip.

Thank You so much!!!! After 5 years this video still helps!!

Thank you for this!! Just needed it and looked all over other fluff vid's and came across yours and this WORKED!

Thank you so much Almost threw my ice maker away thinking its messed up. 👍

My ice maker was doing that ice full thing it was drive by me nuts lol thank you for the tip it worked on my igloo I was so frustrated it took me thirty minutes of fighting with this thing before I decided to KZfaq it and yours was the first video that popped up so thank you for posting this lol you saved an ice makers life today lmqo

Wow! Great fix! My igloo just started with the red ice full light, and I did what you said, and it works! Thank you.

Thank you so much for this. I don’t have the brand but just seeing you hold the select button in made me think to hold the ice button in on mine and it worked. If you have a Frigidaire EFIC235 and it says ice full, just hold the ice button in for 10 seconds to reset.

You are the Man!! Thank you. Been trying to fix it for days now. Works great

Great trick. It worked on my igloo. I thought I was going to have to junk it.

Thanks! Just saved me from buying another ice maker. 👏👏👏

This definitely works. Thank you so much. I thought my ice maker is done for good.

🙏THANK YOU 🙏 Thank you so much!!! ☺️ Funny thing, on count 6 or 7 the “ice full” light turned off & my ice maker started working. 😮 But I continued to hold down the “Select” button for 10 full seconds, just as you instructed. Thanks again very much!😄

Didn't try it yet but will before the day is over. Thanks for sharing.

Worked like a charm on my Euhomy ice maker. Thank you for this video!

You just saved my ice maker from a terrible death!! Thank you

Thank you so much for helping me fix my ice machine!!!!

Brilliant thx so much, had our machine for over 9 years and I honestly thought it was a goner. They are double the price now

Worked like a charm for my igloo ice maker. Thank you

Thank you ! It worked, I almost tossed it out until I decided to see if anyone had an answer ! Thank you

Thank you it worked ! Wish I had seen this before I threw my previous one out 😀

I have a Cooks ice maker...and this trick worked. THANK YOU.

Omggg it worked for my ice machine 🙌🏾 thank youuuu ❤️

Just want to say Thanks , I found one at a garage sale and it looks new but miss the basket. I did the reset like you did and it started to work and the ice full light went off . So far all good . I looked at other on youtube and they said use a jumper wire for the sensor . I like yours Thanks

O M G this works instantly. Thank you. You are an angel even in this summer.

BY using this video, you'll be able to make 2 to 3 cycles before you have to repeat the 10 second reset. To me that is ok if you don't use alot of ice. But in my family it's not exceptable. So if your looking for a more PERMANENT fix, that won't use the ice sensors at all then...1. Remove the 6 screws holding the back of the case on and slide it down. 2. On the right side of the unit, you'll see 2 green switches. Above these switches you will see a RED and a Black wire going to the front of the machine. Back trace these to the GREEN switch harness which plugs into the upper right of the circuit board. 3. CUT both the RED and Black wires. (these actually go to the detector on the left front of the ICE SENSORS.) Cut approx 2 inches from where they plug into the board 4. Strip approx 1/4 inch from both wires and tie them together. 5.Cover with heat shrink or electrical tape. 6. Replace the back cover. 7. Enjoy all the ice you want without resetting all the time. This fix actually tricks the unit into thinking there's no ice in the bin. And allows you to change the size of the ice. No "ICE FULL" light on either. JUST REMEMBER THAT THE UNIT WILL CONTINUOUSLY MAKE ICE SO KEEP AN EYE ON IT, DUMP REGULARLY, AND SHUT OFF AT NIGHT....

This worked great!! Thank you so much! I thought I was gonna have to buy a new one!

Thank you SO much for sharing this!!! I had just watched a video on how to splice and jump the sensor wires and your video popped up next... I'm so glad it did. While I could have spliced the wires- I was hoping there was an easier fix. Once I had held the center button down for the 10 seconds though, I did have to hit the power button again, as it didn't automatically start. Once I did that though... It looks like we're good to go. ❤

This works! Now I need to figure out how to make it work properly when the ice bin IS full!

Worked like a charm! Thanks so much! Igloo btw.

Worked like a charm. My ice maker then ran for one hour and 50 minutes, then stopped. Which filled the bucket without overflowing. It seems to do this every time I use this trick.

Wow! You’re the best this just saved me!!! Everything else was making me take the back off which I didn’t see as necessary. Thank youuu!!!!!!

YAY!!! Thank you so much!!! Worked like a charm!!!

THANK YOU!!! This worked for our Koldfront ice machine

Thanks alot it worked for my RCA machine. Didnt want to buy another one

Really appreciate your help! I’m in SoCal with 100 degree weather. So grateful! Sending prayers your way 🕊

Excellent, worked perfectly, thank you for posting!

thanks that worked like a charm and everything is working again great job, watched other videos requiring you to take things apart and bypassing everything. yours is much easier thanks you so much

Wonderful tip! This helped me and I have a Mellerware

I have a Magic Chef ice maker and this worked! Thank you!

Thank you for this!!! Wonder if I can just set my water level lower to prevent excess built up of ice. At least it still churns!!

Thank you so much… you just saved me a new ice maker!

I know this is an old video but have just come across it as my four yr old ocemachine doing same. Mine is a realise but totally worked for me. So glad I didn't just give up after deep clean and order another. Many tha nks🎉

I tried it an it worked when the unit said add water even when it was full. Thank you for the information!

I promise you I was about to throw my ice machine away, but I really couldn't afford to buy another one. Thank you soooooo much

Worked like a charm, thanks for the video.

thank you! im has been saying that for awhile now so i just gave up on it and left it in my cupboard but after i seen this i took it out and it’s working!

Hey thanks so much. Your tip worked to get it running again.

Thank you! This worked on my Wizisa. It was driving me crazy. I love my ice.

It’s really work with my machine! My machine is a vivohome! I really appreciated this video it’s help for me! I’m over thinking my ice maker machine is broken and I need buy a new one but no I fixed thank to you

This worked my De Longhi (Australia). Thank you very much.

Thank You So Much for posting this!! 👍😁

OH MY GOSH this WORKS !! Thank you SO MUCH SUCH an EASY FIX .. I LOVE my little Icemaker I was so BUMMED that it stopped working.. THANK you !! WOO HOOO !!! ~*~*~

Thank you. That worked a treat just as you said.

Great! Works on my Magic Chef Ice Maker Thanks brother :D

Totally fixed the ice maker that was gifted to me, thanks!

Great trick! Saved me tonight!

On my old one it is the optical LED that has problems. If I use a TV remote and aim at the photo detector it makes ice. Sometimes the LED does work. The plus side, the photo detector does not appear to be all that picky about the LED.

nice video thanks for the bypass info any idea what the part number are for the tx rx pair of diodes are so I can replace my burnt diode?

Omg!! Worked like a charm!! Thank you for that info

Good to know. Only used rubbing alcohol on the sensor eyes so far, but if it starts to act up again will give this a shot.

This worked for me! Got mine making ice again. I then wiped the little sensors near the top of the ice tray and the ice full light went out. We have hard water and got a build up of a white film which blocked the sensors.

Man you are a ice machine genius; unbelievable: I’m appalled.😱 All companies who make these ice machines need to add you to their payroll 🤷🏽‍♂️🤪👍🏾

I was about to buy a new one. Thanks a lot for making this video

OMG!!!! I absolutely love you!!! I was literally going crazy!!! It’s working!

Thank you 🙏🏾 soo much for the video. Thought I was going to have to buy a new one. When I started to hit reset it would work but wouldn’t stop making ice. I read in the comments section that if you hold reset button as it begins to start up it should go back to original setting. Tried it a few times and it actually work. Now it’s making ice like before. Thanks again 👏🏾🔥🔥

Worked like a charm. Thanks! I almost trashed it.

Thank you so much wasn’t sure what to do at all

Just did this and it works!!! I was about to throw it out and buy a new one! Thanks soooo much!!!

Dude totally worked with the RCA one my wife picked from the thrift store today.

Dude you saved my ice maker!!! This worked on my euhomy ice maker!