Australia may have Kurtis, but we have I C Weld with his new light saber!

Cutting Edge and ICWeld on the same day - mana from heaven. Kurtis looks great in the welder's cap you sent him BTW. Much love from the UK.

Oh man that sawzall blade is for wood! My hats off to you for being able to cut welds out like that. Diablo makes really good blades, will save you alot of time and physical wear and tear on your body. Keep up the good work👍

Issac, I look forward for your Posts. I don't weld but there is so much to learn about Planning and the logic you apply to all your work. I really enjoy seen your Son Working with you, he is fortunate to have a great Teacher. I noticed Many people View your Posts but Only a fraction will take the time to at least give you a Thumbs up for your Effort. know you are Appreciated

I saw Isaac whip out that long torch and an image immediately popped into my head. It was Isaac striking a Masked Zorro pose and slashing his name into a piece of metal. He's good enough with a camera to pull it off, too. Great camera work taking us along with your repair, Isaac!

I really dig that new plasma torch handle😳😳 and new tips those would be so handy !! The Gouging tip would be so nice !! And the regular cutting tip you would be able to reach into places you would normally not be able to reach !! I really like Hypertherm's way of thinking very handy new ideas !! Great work as always Thank you for filming this also . And yes in the words of Curtis 🤣🤣 👍👍👍

I would have DIED laughing if an Australian accent would have said 'F**** off plane!'. I like the new light saber, it really gets off in there. Hope you stay cool this summer, be safe.

Those new plasma cutter tips worked real well and made quick work of removing the metal you wanted to get rid of. Pretty clean as well.

Issac, so amazing to have you as a resource. Every day setting the bar so high, yet you're willing to drop knowledge and scholarship on us and drag us along to look over your shoulder. Every video, every repair is an absolute gem.

Man, that new plasma cutter looks like a butter knife in your hands man! What a great tool for your tool box!

Most guys cut plate with 18 TPI blades. Isaac cuts plate with 6 TPI (wood) blades! 💪

Those new tips are like a scalpel.

Always learn from you, ISAAC. ⭐️⭐️⭐️⭐️⭐️👍👍

Great camera work

"I am not gonna say that was fun". LOL I know just what you mean! Hypertherm for the win. Twenty mins up the highway from here is the place they make those.

*I C Weld* Bravo well done, thank-you sir for taking the time to bring us along. GOD Bless.

Issac, that new plasma wand is the cats meow, so to speak. That saw saw blade was a diablo blade. There are all bi metal blades. I use them on everything. They now have a circular saw blade that will cut 1/2 inch steel. Cleanly. Great video sir.

Nicely done. The right tools are nothing without the knowledge and experience to use them. You have a great steady hand. No burn through on the parent metal. Always tough on thin metal.

That would be a really handy plasma tip. Being straight would make it super handy for some jobs. We don’t always get perfect setups in perfect situations doing field welding repairs on heavy machinery

I give them a month before the other side breaks! Great work.

HyperTherm seem to be on a roll with great equipment. But, to have great results takes great skill and you ain't short of skill Isaac. An interesting repair.

ok that new cutter looks like its excellent for really tight spots !

I like that plasma cutter a lot...very nice bit of kit. Nice tidy work Isaac as always , well worth watching

Its like you can see the repair in your mind behind the metal. You are an amazing sculptor!

Thanks for the video I.C. you get to play with all the neat new toys😁 hey thanks for taking us along on the project, wish I had some of these welders, plasma cutters etc. when I was working on car projects. Ok sounded like you were heading off on a vacation, have fun, see ya next video.

I like that straight tip for the torch need to get one of those.

Nice work as usual Isaac. Thanks very much for sharing. Your tack welds look better than most peoples continuous welds. Hope you are going on vacation. Enjoy.

You got those new tips just in time! Makes it look a lot easier than a bath in molten metal a oxy torch would do. Of course you make everything look like it is easy 😅. Great video!

Great new torch. That really gets right in there. Just so you know, it hurts when you hit your hand with a hammer and you might want to avoid it!

Hi from Nacogdoches. Excellent work from a true Texas craftsman.

Makes me realize how much of a toy my cut 50 is.

In shock that you used the sawzall! Those new plasma tips are really a game changer.

WOW. Hypertherm knocked it out of the park. I have a LE plasma torch regular 90 degree and reworking my smoker. PITA to cut inside the box and I have to accommodate the tip offset and the 90 angle. I sure would love to switch over to your setup especially with that long handle that mimics a acy torch. Problem is I don’t use it for making money. So I’ll just have to keep adjusting and grinding and finding other ways to do my projects. Thanks for all your torch work. Truly a Master.

Those plasma nozzles certainly are different!

Lots of times I could have used a nozzle like that. 😅 I don't need to tell you that things rarely break in a convenient place. 😭 I'm not a pro welder, just a guy that's gotta keep the farm running. Love your channel! -John

Wow! That Hyaccess tip is terrific, especially the second one! Whether you will be doing less torch cutting now? We shall see. Thanks for another top-notch video.

Hey Issac, I still drag out my old sawzall from time to time as well. Still destroys my shoulder and wrist as well. I've been using the "dish" type cut off wheels that will cut flush with the flat of the blade. I picked up a M12 power hacksaw that uses the standard sawzall blades and find that helpful in thinner metals. The more tools in the box makes the jobs easier. Always great to see real world repairs. Thanks from Wisconsin

I learn something new almost every episode Issac. Thanks for sharing. Best Wishes to You and Your Family.

Testing a new cutting tool on a clients job, knowing you have the knowledge to repair absolutely any errors made. Massive skills and even bigger cojones Isaac. Respect dude.

Isaac at his trickery again! Good job 👍👍

Isaac I am a couple minutes in I will prob finish this video tomorrow. I just want to comment on your method of tapping the material to determine thickness. I know you mentioned it before but I just noticed you doing it and thought it was cool. Thanks for sharing. You the man.

Yours is one of my channels. Yoy keep your cool, even though the work and locations look hot. You break the job into little pieces so it's not overwhelming. Lots of admiration for a true craftsman!

Tight spot nicely done That’s a handy new plasma torch there Cheers from Nova Scotia

That plasma cutter end is awesome. I dont think i would have a use for it but i want one anyways. Great video as always.

I like the overlapping tack method going uphill far more than running a downhand bead with solid wire mig. I used to do it that way and got some criticism for it too until i hot broke some pieces in the press and showed the penatration.

2 👍's up IC WELD thank you for sharing 🤗

Fascinating. Thanks, Isaac. Beautiful work!

Yes it’s a bit of a strange little job, but they brought it to the right guy, your due care and attention is always impressive. I guess Hypertherm is the go to for air plasma tools eh? Cheers from Tokyo!

Hey Isaac, A thought just came to me you might want to check out. Clint at C&C Equipment was using a Snap-On "air chisel" that also acted as a air powered hammer. He was driving pins out of a "dozer blade". Worked way better than a hammer and chisel. I have an air chisel myself but it is not like what Clint had.

Boy Isaac, great repair. I bought an Everlast PowerPlasma 60S plasma cutter, mainly because of the price. But Hypertherm sure is coming out with some innovative stuff.

I think the slow mo guys use mirrors to keep their cameras from getting ruined. Keep that camera safe, and keep the content coming, this is one of my favorite channels. Cheers

Oliver at Snowball Engineering is also an excellent welder in the UK, enjoy all of you!

Slick torch and tips. Repair is super solid. The other side may be showing up shortly for the same repair.

Great repair man. They will be back when they run the other side into something🔥

wax stick lubricant works wonders to cut down on saw blade friction on jobs like this..that Hypertherm extension sure is a game changer in obtructed cutting..nice work

Hey Issac, I just bought one of those vodo magic eraser. ( Plasma Cutter) Used it first time yesterday. It was only on 18ga but I had a couple circles to cut and it worked well. Never used one before. I'm rebuilding a 65 F350 dump truck. The box is well damaged and will put my new cutter to the test. My oldest grandson has access to a press brake and drop off 1/8" steel to make the replacement sections. Life is good here in Wisconsin!! Thanks

Realy good video throuhout the entire re fab! As always the comentary is entertaining and informative.

Perfect weld by muscle memory !!! Impressive I'm pretty sure that he could not see anything while welding that inner corner. 34:36

Isaac once again phenomenal job !!!!!!!!!!!!like how you use the wood saws all blade to cut steel,,,,,,, I’ve never tried that but that was a wood/nail in bed and Wood nail cutter demo blade you’re very fortunate you had that …….if you’re shopping for sawblades if you have a Lowe’s store in your area look for Lenix Lenix sawblades There about the best for saws all’s Lennox or Diablo are the top shelf the champagne Saw blades for demo blades for anything…I use the a lot through the years has been a carpenter and remodeling and demoing and handyman of all…. not like you as a welder,,,,, but I used them for everything else…. have a good vacation can’t wait for the next class Sam bacon from the East Coast

Thank you for sharing , always a pleasure follow your project, i learn a lot, from Quebec ,Canada 👍👍👍👍

Another fine job like always. Love your videos.

came out great

Great work by a master.

Excellent job

Like the New Plasma Torch. I need to get one, Oxy-Acetylene kind of makes a mess sometimes.

Another great job done!

Love you calm easy going demeanor, great welder, great content, thanks for bring us along

Good job buddy.

Really nice looking job. Stay Safe!

Awesome job

Always enjoy watching your work! Some constructive criticism, have your latches face outward when making picks with multiple leg bridals/chains. The hooks are stronger where the meat of the hook is, causing less wear & tear on them. Also less chance of the chain slipping off the hook or putting pressure on the latch and breaking it

Issac, wonderful video, that new Hypertherm torch head looks super duper handy...... I had seen them at the LWS, but did not really think about the ease of getting into such tight places...that was tight as a crab's ass in there, Water Tight !!!! Have a wonderful 4th of July, Best Wishes from Orlando , Paulie Brown

You do great work!

Always learning from your videos, thank you.

Thanks for sharing your experience and skills I,m also impressed with the sawsall blade mine is usually dull after hitting a nail 😊

Like the new plasma wip

Always look forward to each episode.

Always an interesting video! Thanks.

Pretty cool new tourch👍

Nice work!

A path well trodden by the Gas Axe.

Good Video

Well done 👍

Another great video, thank you for sharing it with us.

Nice job...

Ornery job, nicely done!

Great Work As Allways Isaac

That had to be one of those 5k Chineseium excavators. That frame looks brand new no rust. No wonder there so cheap there made of low grade tin foil.🍻

I watch you so much that now I make suggestions would the gouging rods be better in a instance like this

Always the most interesting thing to see

Thanks for the great video,stay safe.

Great job Isaac as always 🦘

Nice work! 👍

Always something interesting.

looks good

very nice work, thanks for the lesson

Nice plasma tips 😊

Nice work! Take care and be safe..

Pretty GOOD ?? Pretty fn great !! Nice work sir !

that is a sweet attachment right there. Love it ! and this channel !