Dude! That's the first time, I had someone pray for me after a diy video. Continue to shine your light before men....Your floor installation channel is one of the best out there if not the top in my humble opinion. Thanks and...Amen!

Joe, your channel is by far the best I have viewed on flooring. Also, and possibly even more important, when you humbly but boldly profess faith and pray for us, that is powerful. You are being a light in this world, a world that needs men like you showing others the way…you are a blessing in many ways to many people. You inspire me brother. Thank you!

Thank you so much. I work at Lowe’s flooring and I’ll translate your expertise to more people. I’ll tell them about this channel too. Thanks again

Joe I'm just back years later to say thanks yet again for your videos. I laid laminate in most of my house with your videos and tips. You helped me get pro quality results DIY and any shortcomings in minor areas were from before I found your tip for that specific issue. Wishing you nothing but the best in 2024.

I installed a ton of angle to angle flooring and I think it's much better than the tap and lock. I find the best way to install it is to connect the ends together first and connect them together as a very long plank. I used the off cuts from my first row to lock the joints together (I think I got that idea from your videos). I did a 12 x 14 room by myself with no problems. Edit: This was the first room I did this way, but I had done several locking the individual planks together the way the instructions said and it was a royal pain.

Your videos are very informative-I have learned a great deal from you! Thank you for posting such valuable information. The prayer you did at the end was great to see and hear. God Bless you !!! So good to see a God loving person pray for those who are DIY's . Thank You

Another great video Joe, I saved it for when I'm ready to replace my flooring. Always look forward to the prayer at the end. I hope you and your family have a blessed holiday!

Joe, great video! Thank you for the video and, more importantly, for the prayer. That really got to me, man. I don't know why, but it made my eyes start to leak. I've been going through a lot for a long time, and I keep wanting to give up and give in. But through the grace of God, I keep trudging along. Thank you, brother.

So, so helpful!! Just getting m supplies together and I ordered the wrong underlayment… thought thicker was better!! Thanks for steering me away from a big mistake ♥️🙏🏼♥️

Thanks for the prayers, God bless you and your family 🙏

These videos are excellent! Exceptional quality, and I appreciate the quick simple prayer at the end. Thank you, and Blessings on you and yours!

Thank You for your Prayers.

Love that you like QuietWalk. It was the first pad I ever used back when I did my first house in the 90's. The reason was exactly what you said. I liked the density and sound deadening quality and the price.

Thank you for your prayer! Such a blessing to me this morning as I consider helping my son finish his reno project

Amen!! Thank you Brother.

I'm praying for you, too, Joe. Psalm 90:17 "Let the favor of the Lord our God be upon us, and establish the work of our hands upon us; yes, establish the work of our hands!"

Great video, loved all your honest insight!! Getting ready to do our floor and we have debated pad or pad, you helped decide our plan. Thanks and love your prayer at the end! God bless.

Hey Joe! I just want to thank you for super nice and educational videos. Here from Norway, I wish you a Merry Christmas and a nice holiday season.

Useful information about flooring. This is the 2nd video of yours I've watched. I watch these videos to learn from the experience and/or expertise of others. You have compared several underlayments and have identified their particular strengths and weaknesses. I'm after that knowledge, that evidence of pros-cons. Thank you for sharing your knowledge. About the praying - I understand that you believe you are doing us a kindness, and for that I thank you. If you could provide some performance statistics, you know, pros and cons, for the deity you invoke in your prayers, I'd be better able to evaluate it. Thanks again for the info.

Wonderful prayer Joe!

That prayer at the end made me subscribe :)

Thanks for the great information. I have a large living room that used to be a garage. We are going to remove the carpet and put down vinyl planks. So I will be using a pad because of being over concrete. God bless you and thanks again.

Thanks sir just solidified my take on underlayment. Learning so much here.

I was gonna subscribe but when you hit us with the prayer I was like "This dude is LEGIT !" Great video for a layman like myself. I forgot to say I SUBSCRIBED

In Jesus name, yes!! Your a blessing indeed in more ways than you know!! Thanks again too for sharing your wealth of knowledge. I have a small kitchen jon in Jan. My kitchen. Going to look for the pad video now. Thanks Joe

Thanks Joe for the very enlightening video. I’m about to install LVP on basement floor. Was trying to figure out whether to use moisture barrier or pad.

Thanks for all your videos. I put flooring in my first room with your techniques, 15'x15' octagon room. The cheater board is a life saver. I did not put pad down on the concreate subfloor. Leveling the floor is something i need more help on. I have 1,200sqft left to go ;) I fear i'm going to have to do more leveling. lets pray i don't. this next area needs to be continuous. so wish me lots of luck.

I really like #30 felt for underlayment

I unfortunately used pad under my Lvp that had padding. It has caused my planks to start separating due to too much flexing of the planks….

I love you and I love your content. Praise the Lord. May God bless you!

Amen and Thanks for the tips.

I'm considering to get an additional pad like quiet sound just to help my neighbor downstairs live better :D

I used 1/4 inch mass loaded vinyl under my mannington rigid, I have had zero issues thus far

Very informative thanks. Question: I see kind of a brownish oily liquid seeping into my bedroom wooden subfloor. I recently removed a laminate flooring which had an Underlayment and saw wet spot and so left the space open for it to dry out. But now it's getting worse and I have started seeing same oily liquid in other bedroom subfloor as well. Your guidance would be much appreciated on how to deal with this.

Do you have any videos to help me level our floors before laying down planks? Our wood subflood is crazy uneven and has major deflection

Was wondering about this!

I think if I ever redid my Flooret LVP, I'd put a thin pad underneath, for sound and minor differences in the subflooring.

So my house is in Alaska and I am interested in LVP, on an concrete slab, I also wonder about in floor heating radiant heating spots, like bath rooms, in front room, in front of couch and kitchen, How would this work? I have rolled vinyl currently, 15 years old. can it be laid over top? Sorry for so many questions, but big investment. Bless you for sharing your gifts!

Great info, thanks. Question, can I use tar paper under my plank that has a pad on it over my concrete slab floor as a moister barrier? Also, in another of your videos you specifically say no pad under LVP that has a pad already on it and in this one you mention the quiet walk as a good option. Is it just personal taste then? thanks again for your videos!

thank you and God bless you I have learned a lot from you

Can this Quiet Walk be used on stairs before laying the LVP? Wish I had learned about this sooner as we put LVP in upstairs bathrooms and if someone drop a hairbrush is sounds like it's coming through the ceiling down below. We were considering putting LVP through the WHOLE house but because of the noise....NO! We will likely replace the carpet.

Thanks Joe! What do you think about a roll on moisture barrier like Bona R540 for on grade or below grade concrete slabs before a pad is used?

Do you have another video on how to install the pad/vapor barrier?

I pulled up my floor and noticed where the dishwasher was there is a lot of moisture. Can I use a moisture barrier just under the tucked away dishwasher area to protect the floor?

Question: Loved the video and the prayer at the end, my rigid core nucore floor does not recommend anything over 1mm underlayment, would this quietwalk lv still work since it is 1.4mm or will it cause my floor to buckle or separate over time

Do recommend using a pad in a second floor bathroom installation? Do you have a bathroom vinyl plank installation video?

What are some examples of the two types? Is Home Depot's Lifeproof drop and lock?

I love quiet walk LV, BUT, my nucore drop and and lock felt too soft, joints felx too much for my liking, i removed half my living room to remove the qw, and put down poly 6mil. Feels more solid, no joint flex. There were 6 planks with broken butt joints that I found. Too much felx, these were all under furniture legs too. Its to bad I really wanted to use the q walk lv since it has moisture wick. Possibly differnt brand of plank wouldnt have this issue.

what's the point plank movement? I thought it is best to have no movement above the underlay

Joe, do have any experience installing LVP on DMX 1-step? We are installing LVP on our basement floor. Our house was built in the 50s , so we don’t have any vapour-moisture barrier nor do we have the ceiling height to have a proper subfloor. I am concerned that the 1-step product will cause joint issues. We are looking at purchasing Lifeproof 22mil 6.5 mm thick LVP. Any suggestions or tips?

great vid man !!

Thanks

Will you be sharing any information on using electric heated floor padding under any on the flooring?

I installed LVP in a portable building. There is padding on the backside of the plank, and did not put a moisture barrier underneath. I just hope I don’t get a callback. 😳🤞🤞🤞

Thank you for this! QUESTION: If I have to leave the 1972 vinyl sheet in place because of asbestos, can I use levelling cement on top of the old vinyl sheet (uneven plywood subfloor), then put down the Quiet Walk LV, then the new rigid core SPC vinyl plank with attached foam pad flooring on top? I am concerned the vinyl will bubble up with suction (as it dries) under the levelling cement and destroy the vinyl seal that encapsulates the asbestos backing, and create a crumbly concrete mess under the underlayment. I am also concerned the Quiet Walk LV underlayment will be too slippery on top of the smooth vinyl and will bunch up under the planks. What are your thoughts for putting rigid core SPC flooring on top of old uneven vinyl flooring that can't come out?

Awesome videos, I’m planning a basement using Floorette over concrete. Is Quietwalk my best option for padding? Thanks

What about if installing on second floor bathroom. Would you use a plastic vapor barrier? Also would recommend using extra padding or just the padding attached to the vinyl plank? Last questions if you don't mind, what if your floor have lots of staples due to removing vinyl rug?

always great info thanks Brother! God Bless

Would you use a pad for Flooret LVP? It’s on a plywood subfloor.

@9:56, you're lifting on opposite sides of the lock. How could you pull the planks apart when there is a lip under the side you're lifting?

Joe I have old tile that I want to cover do I want a pad?

Question, I stripped carpet out of the master bedroom of our property we purchased and the padding was turning to dust. My question would be would you recommend stripping the glue off, or putting an extra pad down. It's a concert floor and I am struggling with getting the glue scrapped up. In some areas it's thin like a piece of paper but other areas seem to be thicker. I am wondering if you would strip the glue and put waterproof flooring down, or would you just strip the glue and paint the concrete floor. Also the master bathroom had the same carpeting do I need to strip the glue off the plywood before installing either linoleum or or waterproof flooring? Thank You for these videos they're very helpful.

I’m putting vinyl plank down for a friend. I’ve watched a lot of your videos and I’m pretty comfortable doing the install. This is going over concrete. Do I need a vapor barrier down first on the concrete. This plank has a sound mitigating underlayment. What do you suggest? God Bless!!

I have a condo concrete sub floor. It won’t get much moisture or water. Would you still recommend I get a vapor barrier?

Question - a lot of LVP floors that I walk on sound like “plastic” if you know what I mean. They don’t sound solid like wood. If I do angle lock LVP on a concrete (no moisture issues) would that black pad eliminate or reduce that type of sound. THANKS!!

Hey Joe, have u ever heard of Firmfit the intown collection? How is it? Thanks!

I am installing click vinyl with 4,2 mm thickness without integrated underlayment on OSB. It is a bathroom with a bath, should i put any foil underneath vinyl? I was thinking vapor permeable foil that you use on roofs to protect OSB just in case or maybe nothing as manufacturer suggests (they also told me to glue it down in bathroom...).

Will the pad not hold the water against the sub floor and create the perfect environment for mold and wood rot? I had that problem ,water, underneath my vinyl plank w/o a pad. I had no idea the water or the mold damage was there for a long time. Disaster.

Curious on whether you would use a pad when installing over an existing tile and vinyl plank floor? I'll be using a cork-backed core luxury vinyl plank from Floor and Decor - what I've read is you need that stiff cork back to go over tile so grout lines don't bleed through - but do I also need some sort of pad? Seems like overkill, but I'll like some opinions. Thanks!

I put quiet walk under my luxury vinyl i dident use quite walk luxury vinyl and I accidentally put the blue vapor barrier facing down in the second floor of my house. Do you think I should be okay?

Been watching your videos, thank you. I am looking for a tile looking plank in the shade of gray. I was told that I should install something that is tongue and groove like all 4 sides like coretec. Is there any other company out there that its this way without braking the bank? Coretec stone I was quoted 6.80 sq ft. Is this reasonable and is it worth it?

Sir I have a question im installing LVP flooring on the first floor of my house It’s a new house new build just under a month old it has cheap vinyl flooring over the plywood since it has a basement. Can I install the LVP right over the vinyl? It was too expensive for the developer to install LVP the reason why I am doing it my self. There are only minimal areas where the vinyl bubbled. Thank you!

@SoThatsHowYouDoThat Thanks for all your great videos and insight! Do all your recommendations regarding pad hold true when installing in a new manufactured home (we don't like the flooring choices they offer)? We're looking at the NuCore 6.5mm which says underlayment is recommended but not required. Any thoughts you have on this would be greatly appreciated.

What do you think about putting a 1200 pound pool table pn top of it

Joe - I’m between Flooret Modin LVP and Coretech Plus Premium that has the green pad attached. Any thoughts on which way to go?

Hi Joe, I’m preparing to install laminate planks to replace 3/4” hardwood on the second floor that’s outdated. Do you think I should rip out the HW first? The HW is in every room, hallway and stair case down to first. We recently installed tiles in the upstairs bathroom at level with the old HW (maybe there’s a 1/8”-1/16” higher difference). If I rip out the HW I would need to install another subfloor. So should I leave the HW and install on top? If so they’ll be a lip to the bathroom. The laminate is 12 mm (not quite 1/2”). It’s my dilemma right now lol. Also the HW cracks a lot. So I’ll need to nail it in everywhere like you did to prep it. Do you have a video where you install laminate in a staircase? FYI I’ve never did that before. Like your videos. Thanks Joe

i cant find QuietLock 1.4 mill for my basement install. Because of the radon thing in CO we were going to SEAL the floor first then LVP. Is it not recommended to use a pad with rubber sealing ?

I am about to install Flooret LVP over the slab in the basement. I know in that video you said the manufacturer recommends vapor barrier but not a pad, what exactly does that mean? Also I really dislike the thought of trapping moisture under the flooring. Thank you for all of your videos I am hoping they will pay off as I go to do this install.

Nice job god bless

I have jus finished 3 bedrooms because of your videos. I may have made a huge mistake though. I put down Mohawk rigid vinyl plank on a concrete slab without adding a vapor barrier. I have been stressing this week wondering if I need to redo it with a vapor barrier. House is a single floor with no basement and is 10 years old. Do you think I’m ok to leave it as is?

I personally don't recommend to add underlayment to spc thay already has pad. It would make it more weak on the joints and with the everyday use the joints will start cracking

Im on a second floor condo and I need soundproofing. I would be laying it on concrete. I have no idea where to start product wise. Can you recommend what products and brands I should purchase?

Joe, I was told by a sales person at floor and decor, that I can lay nu core performance over existing linoleum floor. Also, that I could apply the floor, right to my bare plywood floor. Are both of these statements true?

I think you were lifting the plank the wrong way though.

Yea never will get wet. Mold will just build up under all of that

Ахуенно 💪👍