I miss this one!

You know, I don't think I ever tested it before trimming them. I just kind of knew they would given the geometry and I had learned about using an air saw to trim these flares, which made it relatively easy to trim.

I think so. It was more for peace of mind. Had I added the extra accessories I was planning (winch, power inverter, etc) it definitely would have been worth it. I had 160 amp alternator in my 2008 JKU and it powered all my added accessories with ease.

@@TheNotSoOrdinaryCarGuy Peace of mind can't be underestimated. Aside from better lights and a possible winch by Fall, I just installed Kicker speakers, subwoofer with a high voltage amp to power them. And since, the TJ's volt meter isn't at 14 or above anymore. It's more 12-13 now. This TJ has the original alternator from '05. So it's time. I just ordered the PA 160 A Alternator with the Zen upgraded cables. I'm all about preventative maintenance, get after it before it becomes a problem.

@@JeepTJWheelin I can tell you that once I installed this setup, the volt meter would be at or above 14 a lot more frequently than before.

@@TheNotSoOrdinaryCarGuy Great to know, incidentally why are you selling your TJ Rubicon? That's a great build.

@@JeepTJWheelin I recently bought a Jeep Gladiator and having two project Jeeps was just too much for me right now. lol. I never wanted to see the TJ go.

It's been sold.

No. I currently do not have any like this TJ that are for sale. Although I did recently buy a 2021 JLU Rubicon 4xE that I hope to have a video out about it soon! Stay tuned!

Big Tex Autoplex

@@TheNotSoOrdinaryCarGuy thank you!

I’m sorry, this has already been sold! Thanks!

You’re right. I should just be happy I even had the opportunity to own it!

Replaced the factory muffler with a Magnaflow Glass Pack muffler.

They are the Quadratec Rubicon Xtreme Wheel in gun metal gray, size 15x8 with 4" backspacing (-12 offset). www.quadratec.com/p/quadratec/rubicon-xtreme-wheel-wrangler-yj-tj?gclid=Cj0KCQjw1vSZBhDuARIsAKZlijREv2AVvMnFHRjbofm7pXduwXNsNKRoCRm3e2LmYbm4SyRVyS2-HXUaAlVIEALw_wcB

I just wanted to go a different direction with all of my vehicles. I owned the TJ for over 2 years, which is a decent length of time for me, and did a lot with it during that time. This was also my 4th Jeep Wrangler. I'm now on my 5th, which is a 2021 Jeep Wrangler Unlimited Rubicon 4xE.

Will be listing at an online auction called carsandbids.com.

The Zone Offroad 4.25" Combo system with Nitro Shocks (and front sway bar disconnects) cost right at $638.62 with tax and shipping from Amazon.

@@TheNotSoOrdinaryCarGuy is it hard to install if you have never done a lift kit before?

@@NickKnapik8 If it's your first time, I'd maybe shy away from this lift. It is a combination body and spring lift, so it's got a lot going on for a first lift. I also ran into issues with rusted shock bolts becoming stripped and having to find unique ways to get them out. I've lifted several Jeeps that I've owned and I'd say this ranked up there as one of the hardest to install. Not really because it was overly difficult to understand, but because of it having a lot of different steps that require adjusting more than your traditional lift would. For example, by lifting the body 1.25 inches (1,25" body, 3" spring coil, gives it the "combo" designation), the kit also comes with engine mount spacers to help the driveline angles not be as great. Stuff like that, if you're a first timer, might be a little intimidating. At least it would be if it was my first lift. The first lift I ever installed was on a 2008 Jeep Wrangler JK Unlimited Rubicon and it was a very simple spring and shock lift. I hope this helps!

@@TheNotSoOrdinaryCarGuy thank you for the help. I just got my 03 TJ and want to put at least a 3 inch lift on it. Any suggestions?

@@NickKnapik8 You could just get the Zone off road 3" kit. It doesn't require the engine mount modification or the body lift. www.extremeterrain.com/zone-3inch-tj0306-nitro-j3n.html

Thank you!

They are getting harder and harder to find in good shape!