INDIAN CLUBS | Make a Gada 2 Add Concrete and Shot

No video

INDIAN CLUBS | Make a Gada 2 Add Concrete and Shot

Рет қаралды 23,263

Күн бұрын

INDIAN CLUBS | Make a Gada 2 Add Concrete and Shot
=====
Free Instructions to make a Traditional Gada (mace)
Three Video Series (see video list and links below)
Follow the link below for complete FREE instructions, which are fully described and illustrated with photographs.
www.indianclubs...
Video 1 | Make a Gada Prepare the Bamboo
• INDIAN CLUBS | Make a ...
Video 2 | Make a Gada Add Concrete and Shot
• INDIAN CLUBS | Make a ...
Video 3 | Make a Gada Finishing Touches
• INDIAN CLUBS | Make a ...
Free training for Indian Clubs
www.indianclubs...
Yours in club and gada swinging
Paul Taras Wolkowinski

Пікірлер: 13

@thehellezell 6 жыл бұрын

Thanks Paul. Wishing you well on your path to recovery!

@Doger46 4 жыл бұрын

Awesome paul, very well explained

@user-bm2dg7ro4f 2 жыл бұрын

Спасибо !

@bustedcombine 6 жыл бұрын

Love this channel!

@mikemikemikemikemikemeup 11 ай бұрын

I just made my first one and it turned out to be 22 pounds. I was going for closer to 15 but I overshot in a little bit. Is that to much to start at? I was thinking about making another one that weigh less and working up to the 22 pounds.

@Wolkowinski 11 ай бұрын

I would recommend 7 to 10 kg as a starting weight. You have to consider that when you swing a Gada, the weight will triple as the Gada drops behind you. It will be the heaviest as it crosses your spine. That means that a 7 kg Gada will increase in weight to 21 kg due to gravitational pull, and you have to then pull it up. It's something that you have to learn to deal with.

@johncoffin9354 6 жыл бұрын

I actually used a vinegar jug, leaving the neck in place, I cut a panel out of the sloped shoulder. The neck helped keep the handle perpendicular. I didn't trust either my eyeball judgment or the stability of drying concrete. Alas, I had to give up the gada when I was forced to move. Thanks for this, It wouldn't have occurred to me to push the handle in. I went nuts trying to fill around it.