Thank you. This is what most people need to start off. Thank you very much. 😁😁👍

Thanks for the video, I have 5/6 years doing photogrammetry (Phantom 3, 4 rtk, Mavic 3E), but I feel that it is already necessary to take the next step to the world of "scanning with LiDAR", shout-outs from Mexico

Great video Harrison, really gives a clear picture of the whole process! Keep the good work!

Nice video as usual. Maybe people should also know all the stuff behind the GNNS antenna like the Emlid, i peronally use the Trimble DA2 but i think you have to configure the coordinate system according with your area, maybe also the provider that send data to the Emlid and so on.

Great video ! Are you using SLAM algorithm to build a map the environment ?

Thanks you Harrison.

@harrison Eager to look at data capture of structures - heritage one with more details in specific .

So, is it necessary to be a licensed surveyor to do LIDAR surveys or do you contract to a surveyor?

Excellent video, Thanks Bro. Keep posting good videos

Does this setup support network corrections instead of using of a base staion?

Thank you - I have been trying to find these steps - good job!

Hi. Can you import a 3D model/scene captured by the Rock R3 Pro into Solidworks or any 3D animation software?

I have a favour. Could you do the Canada drone pilots test. In Canada you need a liscene to fly a drone... 😫. Unless it's really light. And people say the course is hard. And it cost a bit of money. I figured it would be a good test for skills and would give Canadian viewers an idea of what it takes to start flying up here.

Do you have to upload a DTM for terrain following for the Rock app or does it pull it from a database?

Hey, Harrison. You mentioned that if you set up over a known point with the RS2 it would help in post. When and where do you factor in the known coordinates? I'm not seeing anywhere in the Rock Desktop to manually input coordinates. 🤔

Your very helpful thank you

Great video showing the whole process. The one button press is a great feature on the R3Pro. Do you have any tutorials or suggestions with the corridor mapping? I’m trying to figure out how to maximize a long LiDAR scan I need to do for miles of road capture

This need more views bc I see this ad alot

Hello, Harrison. What is your preferred AGL? Is there a sweet spot for balancing relative altitude and resolution?

Thanks!

HEY DO YOU HAVE VIDEOS ON THE EMILD FLOW? LIKE HOW IT ACTUALLY WORKS. I PUT IT TO TEST AGAINST A TRIMBLE R12 AND MY NUMBERS BACK WERE PRETTY TERRIBLE. I WAS DIALED INTO THE FPRN SO I DONT KNOW WHY I WAS GETTING A DIFFERENCE OF LIKE 3 TENTHS. MAYBE USER ERROR. IDK. BUT IM SUPER CURIOUS TO SEE AS TO WHY MINE GAVE SUCH TERRIBLE VALUES.

Since the R3 pro is also slam, can you fly a mission then take the R3 off and start doing SLAM in case you need extra details the flight may not be able to get?

Does having people in your target area affect your Scan capture on both R3 and or R3-SLAM?

Awesome walk through from start to finish. Super accurate LiDAR. Easy to use.

Hi, I'd really appreciate it if you could create a video about the maximum capabilities of the drone LiDAR combo. I'm particularly interested in understanding the highest altitude and minimum overlap required for obtaining quality data on one battery set. Additionally, if it's possible to share the dataset derived from this exploration, I would find that extremely valuable. I'd love to see how the combo performs in an environment with mixed vegetation, buildings, maybe power lines and roads. This would provide a great insight into its practical utility and limitations. Thanks in advance and have a nice day

You mention the rock pilot app, but i don't see that available. Where can i get it?

Do you do training aside from KZfaq videos?

Great video, really gives a clear picture of how lidar data is produced. I think you did mention all the key parameters users need to take care of while generating lidar data.

Yeih one more drone to Moscow 😄

This is great! We'll have more to come, too!

How to purchase this drone

Hello everyone, I want to decode pcap file to make a cloud pointd visualization

So how much is all this cost? And I mean ALL, those posts, survey points, software, etc.

Great video! I really like watching the whole process and keeping the video long. How feasible is it to do piloting and LiDAR processioning as your own business, without being a licensed surveyor? Is there any market for licensed surveyors to get this point cloud data from someone who is not a surveyor?

I fly very well, I hope you too very well fly beijinhos 🤑🤑

Why was this an ad, i dont watch drone videos, i dont even have a drone. The YT algorithm is broken

Just one other thought for everyone nee to this. During your base set up make sure to put the correct height of your antenna. 2Meter on the provided pole but could vary if you put it on a regular tripod and tribrach assembly.

Question to Harrison and drone pilots: What was your highest and lowest flight altitude, and how did it end? I flew as low as 20 meters in a valley and had to pick up my DJI M2P like fruit from the trees :) Due to the terrain, I once had to fly over 100 meters, and the resolution was practically worse than Google Earth.

Lol

How To Fly

I bet that whole setup must cost at least $400.