How To Get Riding Mower Tire Back On Rim Tire Came Off Rim Easy Fix Tire Won't Air Up Won't Inflate
Рет қаралды 599,787
4 ай бұрынThank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
We show you how to put a tire back on the rim of a riding mower when they come off the bead and rim.
We show three different tires in different starts of being flat and different things going on with them.
We show the process to air them up or seal them back to the bead and get air into them.
This is the easy way to get it back onto the rim that is a safe method.
Works every time, if one does not work, use two.
We use this method most often on riding mowers and snow blowers where the tire will not go back onto the rim easily.
See us fix the rest of the mower and get it ready for sale at • Riding Mower How We Ch...
Got a method I didn't go over here that works well for you? Comment about it below!
Tire Inflator Gauge ( amzn.to/48KoPao ) Upgraded One At ( amzn.to/3So4H6R )
Cheap Set Of Ratchet Straps ( amzn.to/3HylgrG )
Bead Buster Tire Bead Sealer Grease ( amzn.to/3vOwNAU )
Valve Stem/Cores & Tire Tool ( amzn.to/3tTen1j )
If you have dry rotting but do not want to replace the tire you can purchase Liquitube which works well to seal up holes and get you back rolling ( amzn.to/491Ad1s )
Video equipment:
GoPro Hero 10 ( amzn.to/3O4LFkQ )
GoPro Hero 11 ( amzn.to/48rIcVz )
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#craftsman #carlisle #johndeere #tirerepair #easyrepair #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.
@dpb22 Күн бұрын
Thanks for this. Got me back up and running when I'm usually incompetent at this stuff.
@boonecountygenerators3052 4 ай бұрын
I remember as a kid, watching my grandpa wrap baler twine around a small tire, then tighten it up by twisting it with a screwdriver to push the bead out. That's the sort of thing a good grandpa will teach you. Next video, teach us the "flammable aerosol and bic lighter" method. Or are there already too many of those on KZfaq? 😁
@IndRepair 4 ай бұрын
Haha, what a great life lesson. Not the baler twine the burnt eyebrows after my next trick lol. I have done the other ways and they do work - in some very limited or extreme cases. Awesome story about the grandpa! Thanks for watching!
@matta3888 4 ай бұрын
Nice educational information. I have paid the tire shop to install tube.
@IndRepair 4 ай бұрын
@@matta3888 Nice! Thanks for watching!
@davesponaugle9918 4 ай бұрын
If you use that flammable aerosol method, if you ever take it to a tire shop, as soon as they smell the flammable aerosol vapors, you will be asked to remove the tire from their property.
@frankwoodward1231 4 ай бұрын
Ratchet strap is my go to. Wheel barrow, lawn tractor,side side,etc.
@billk9628 5 сағат бұрын
I used to work in heavy equipment repair, and I used this technique on 50 ton Grove cranes for tires as well. You know, the 7 foot tall ones? I used a 3000lbs come along chain tackle not a strap, but the idea is the same. Squeeze the beeds out to the wheel beed surfaces. Often new tires come in on pallets stacked and crush the beeds together making it hell to install. Then air up. In my case shop air would take better than an hour to fill to 50PSI. So I used a pressure regulator like for a compressor, on my air hose to fill it up. That way I could walk away and not worry about it, and when in was full it would stop. Gotta be smarter than the equipment people!🤔😉
@bobbert5000 4 ай бұрын
We once used a strap to seat a car tire and put too much air in before removing it. The strap ended up breaking under stress, and the metal part slammed the guy inflating it right in the "you know where." He rolled around on the floor for awhile in serious pain. A lesson was learned!
@IndRepair 4 ай бұрын
Yeah, definitely not s good idea to over inflate anything! On the last tire it didn't seem like the gauge wanted to work at first but it was definitely overinflated. Thanks for watching!
@billk9628 6 сағат бұрын
You know there is a shallow end in the gene pool!🤣
@michaelsweeney9282 Ай бұрын
Toilet wax ring works as a sealer. Using it and ratchet strap for many years Cheap & easy to find
@IndRepair Ай бұрын
Great info!
@HWPcville 3 ай бұрын
When I took auto mechanics in 1970 we had an easy to use tool specifically for expanding the bead of a tire. It was a woven nylon tube that had an inner tube of rubber with a schrader valve. The nylon encircled the tire (such as your ratchet strap), was tugged tight then the inner tube inflated. As the tube grew in diameter it tightened and constricted the tire causing the bead to expand. As I recall it worked very well.
@IndRepair 3 ай бұрын
A couple people have mentioned this to us! I have never heard of such a thing until posting this video. We do around 300 tires a year and normally just use a tube to air them up overnight and then do not have to fight with them at all because the bead is already pushed outward. If we need them done right away or have a difficult one we normally just use the bead blaster but I hate lugging it out. If I am doing it and the mower is on the table I just grab the strap off the wall and normally have it fixed within the time it would have taken me to walk and get the bead blaster. Good tip and thank you for watching!
@MrRodepp 3 ай бұрын
That's what we had at a Service Station I worked at in my high school days. 1968! Wish many times I had one again. I have not looked for one, but E-bay probably has it.
@IndRepair 2 ай бұрын
Awesome!!
@kwitwerikok8o863 2 ай бұрын
Yes, in our shop we always had that inflatable strap standing by and had to use it about 50% of the time. I no longer work in a garage, but I have had success with a tie down strap pulled tight.
@IndRepair 2 ай бұрын
@@kwitwerikok8o863 Awesome! Thanks for watching!
@adamelrod5540 Ай бұрын
We were stuck out in woods no ratchet strap no starting fluid to blow it back up. So we did kinda like your grease trick dug mud outta the creek and packed bead with mud so we could get it back on and outta woods worked like a charm n
@IndRepair 29 күн бұрын
That's an awesome story there!!
@IndRepair 29 күн бұрын
Great thinking!
@Astro.kittt.. 10 күн бұрын
I built tires for 25 years. In doing so, we lubed the flanges with lard. Not sure if this could be used in the same way you are using it. Also, if you ever get into grease with graphite in it, clean your hands with lard. That grease with graphite in it is next to impossible to get off with soap and water. With lard, you are clean in seconds.
@IndRepair 10 күн бұрын
That's some interesting information thanks for sharing your knowledge!
@user-pt5or6mc7v 4 ай бұрын
For slow leaks in a small tire remove valve stem and get a bottle with corn oil in it with a hose that fits over the valve stem.Squirt about a cup or 2 in the tire. Reinstall the inner stem and fill with air and rotate the tire. The corn oil is thick and sticky and works better than slime as slime is not made for slow moving tires as it needs the speed to rotate and do its job.
@IndRepair 4 ай бұрын
Interesting! We usually use Liquitube for tire sealant. Thanks for the tip and for watching!
@mikem5475 4 ай бұрын
Something weird I've noticed is used motor oil works great. Mowers n blowers says tranny fluid works great. Seeing as used motor oil is unlimited I've always used that, but I'd bet corn oil works even better because it hardens over time
@IndRepair 4 ай бұрын
@@mikem5475Great tips! Thanks for watching!
@charlesbrown5117 4 ай бұрын
Great video!
@skipproctor8979 4 ай бұрын
Love the bead buster. Better then the cheap stuff I've been using. A lot of my tires have dry rot, so I end up having to remove one side of the tire and inserting a tube. This is of course a last resort. Would be good if you could do a video on tube replacement. Thanks!
@IndRepair 4 ай бұрын
Yeah, tubes in certain cases are the best option for sure. Thanks for watching!
@lyonsmt11 8 күн бұрын
Great video! Every yard man should review...
@IndRepair 7 күн бұрын
I appreciate that
@dereksollows9783 4 ай бұрын
I have had the problem a lot over the years. The quickie solution that has worked best (and for the longest) was one that I saw on KZfaq about 5 years ago. The ratchet strap was used in the video but I only even used it the first time. After that I did a simplified version. Step one- take the weight off, Step two-clean the tire bead and the wheel where the bead must fit-in, Step three- put a bead of household silicone caulking around the rim, inside and outside, Step four- a squirt if quick start inside the tire, Step five- wave a propane torch at the tire. The effect is FAST. It pops right into place. Step six, add air. The whole job only takes a minute or two. I found that the ratchet strap wasn't necessary as the explosion is so fast.
@IndRepair 4 ай бұрын
That is an interesting way of doing it! Thanks for watching!
@ZZZBULL 3 күн бұрын
I used carb injector cleaner spray and lighter.Done it several times it absolutely works.Light it pooof then use rag put flame out.Then air up tire.Saw this here on KZfaq,
@IndRepair 3 күн бұрын
Definitely works if you do it right. Hesitate to instruct homeowner to do this
@GermanSausagesAreTheWurst Күн бұрын
I had a buddy who was a pro at this. I think he used starting fluid though.
@johnstreckfus945 4 ай бұрын
I use Murphys tire lube from NAPA Auto Parts, the last one I got was $12.00 for 8lbs. Has served me well for over 30 years.
@IndRepair 4 ай бұрын
I will definitely be looking for this! Thanks for the heads up!
@IndRepair 4 ай бұрын
@@twistedhillbilly6157 Our other mechanic here was talking about using it for truck tires, looks like I will be grabbing some at Napa soon. It says they have it in stock anyway. We do 200 or so tires a year, normally just blow a tube up in them overnight and next day they go right on with a little lube and many times don't even have to remove the valve core. Great tips!
@gregorybarth930 3 ай бұрын
I just use dish soap as a lubricant. Get the super cheap stuff from dollar store that way the wife won't steal it.
@IndRepair 3 ай бұрын
@@gregorybarth930 Yeah, for sure! Get the Dawn Platinum and it dissapears pretty quick!
@Rein_Ciarfella 4 ай бұрын
Really excellent video! Thanks so much for doing this one. This is the first time I’ve heard of Bead Buster. Reminds me a lot of Bag Balm!
@IndRepair 4 ай бұрын
I appreciate that! Thanks for watching!
@steveriggenbach90 4 ай бұрын
A lot of valuable info. Never heard of bead buster or use regular screwdriver. Lost a zero turn tire in middle of yard. Only had a rope, so made it into a tourniquet by using a branch. Lol worked great.
@IndRepair 4 ай бұрын
Good stuff there! Had one come in covered in duck tape once. Same concept. If It works, it works.
@MikeOrazzi 3 ай бұрын
Nice ideas, thanks. This seems to happen to me more often than it should. I have too many old lawn tractors and tractors. @@IndRepair
@IndRepair 3 ай бұрын
@@MikeOrazzi You and me both! It is a bear going to start equipment and struggling with tires or other things. Thats why we fix them right and skip the hassle
@oldengineguy 4 ай бұрын
I use a spray bottle with dish soap and water for lubricant on the beads. Rotate the tire while pushing against the rim while holding the rim from turning. This will get the bead on the back side to begin to seat on the rim. Then once you start putting the air to it, gently pull the tire toward the side of the rim closest to you and it’ll often close the gap enough to close to close up and seal. You have to pull gently so as not to unseat the barely-sealing bead that you just pushed on around on the back side.
@IndRepair 4 ай бұрын
Any lubricant can definitely help. Many times I feel like it keeps me from the bead holding itself in place, it will slips back towards the inside and be more difficult. Appreciate the tips and thanks for watching!
@cliffordbowman6777 2 ай бұрын
Murphy’s oil soap is real good for bead. Real slippery. Also use kids bubble liquid to check for leaks. It’ll keep bubbling for the smallest leaks
@cliffordbowman6777 2 ай бұрын
Once you get tire on wipe the slippery stuff till is off the bead.
@IndRepair 2 ай бұрын
Great tips!
@IndRepair 2 ай бұрын
Great tips!
@ziffelpig9249 4 ай бұрын
Good video. I have had to do that to a number of small tractors, mowers, etc. But the best cure is an inner tube. Tubless tires are more subject to dirt getting into the bead seating area causing air loss. But not so with a tube and the bead seating area doesn't have to be perfectly clean. And the customer's always see it my way.
@IndRepair 4 ай бұрын
Sure thing! Problem we run into is places that have thorns or keep getting them punctured then go tire sealant or a solid tire
@epmcdonald4562 17 күн бұрын
Until you run over thorns and then screwed.... and tubes aren't cheap anymore! Only reason get dirt tree bark land scape timber shaving is tire is low of air to begin with and then knuckle head driving... and then go air it up but too late for that now! Leaks around rim w trash in it!.. much easier w plug kit for Tubeless thorn flats. And cheaper if do it yourselfer.
@ziffelpig9249 17 күн бұрын
@@epmcdonald4562 Whatever
@philipdepasquale414 Ай бұрын
Thank you so much for this. I was ready to rip out my hair. It took two straps but it worked perfectly.
@IndRepair Ай бұрын
Glad it worked for you! Thanks for watching!
@TF856 Ай бұрын
Our family had an air compressor and used the inflatable outer tube with strap to help inflate tires. I wonder how many people think of putting water in tires to help add weight to tires for better traction. I've been fixing flat tires on bicycles and cars since I was about 15 and I have never heard of that bead buster stuff.
@IndRepair Ай бұрын
Interesting! Thanks for sharing and for watching!
@lloydscharf6897 Ай бұрын
I've used windshield washer fulid as cheep antfreez so the tires were weighted in cold weather.
@billsmith1770 4 ай бұрын
you can make your own "cheetah" style bead seater from an old grill tank , a lever style (1/4 turn) valve , and a 1 foot long pipe flattened on one end . mine has saved the day many times .
@IndRepair 4 ай бұрын
A bead sealer is definitely so much easier than any of this! Thanks for watching!
@garyalford9394 4 ай бұрын
No you can't get much easier then the cheetah style air tank, and they will do truck tires !@@IndRepair
@IndRepair 4 ай бұрын
@@garyalford9394 They do it so well I was very angry the first time I saw one in use. WHY did someone not show me this sooner? HAHA! I just try to remember the struggles and go off the questions customers ask to go over things that for most of use may be common knowledge
@jasonverner1 3 ай бұрын
Yep a bead seater is less 70 dollars on Amazon. Works great.
@stellahryniewicz8242 2 ай бұрын
I taught my son-in-law how to put a rope around it the way my dad did it years ago
@IndRepair 2 ай бұрын
A turnicate, belt or anything to hold the tire tight will work well. Thanks for watching!
@9_to_5_gaming65 9 күн бұрын
Thank you for posting this it really helped.
@IndRepair 9 күн бұрын
So glad to help! Thanks for watching!
@johngrisbach9417 3 ай бұрын
I learned three great tricks. Thx..
@IndRepair 3 ай бұрын
Thanks for watching!
@rehoye 3 ай бұрын
Great presentation.
@IndRepair 3 ай бұрын
I appreciate that! Thanks for watching!
@deannacousin2339 17 күн бұрын
Thanks so much gonna try tonight!
@IndRepair 16 күн бұрын
How did it go?
@tonymartin4004 13 күн бұрын
I've used a piece of rope, measure, tie rope together,use screwdriver or even a green stick to twist the rope, it will push the tire sides outward, then put the air to it.
@IndRepair 12 күн бұрын
The old turnicate tire rescue. Thanks for sharing!
@rickbroerman9267 4 ай бұрын
Your videos are the best
@IndRepair 4 ай бұрын
I appreciate that and you watching!
@Skulllywag 4 ай бұрын
The video IS helpful. I used to have to do this quite frequently with my previous 2 mowers. My current one (Cub Cadet) advertised tires/rims that would resist breaking seal with the rim. I have mesquite trees in my yard, and slow leaks from thorns are a non-stop problem despite many plugs.... But I really don't care, it takes a couple minutes to air up tires no matter how long they've sat flat. Some mowers use garbage tires that will separate from the rim every time they go flat, others use better quality that won't. Research wheels along with other specs when buying a mower...it could save you a TON of time and effort.
@IndRepair 4 ай бұрын
Thanks for watching! It is a pain sometimes for sure but solid tires if you have too many thorns is the way to go
@matthewhogue9727 19 күн бұрын
Very informative thanks 👍
@IndRepair 18 күн бұрын
Thanks for watching!
@eddyhouston7670 3 ай бұрын
This was helpful, thank you
@IndRepair 3 ай бұрын
Thanks for watching!
@blackhorse2947 2 ай бұрын
Great information and demonstration………..👍
@IndRepair 2 ай бұрын
I appreciate that! Thanks for watching!
@dennisstuhr9201 Ай бұрын
Very helpful thank you
@IndRepair Ай бұрын
Glad to help! Thanks for watching!
@ThisIsToolman Ай бұрын
I use the ratchet strap. I would recommend that once you have the tire back on both beads, let some of the pressure out before attempting to remove the straps. I had a strap knock the hell out of my knuckles.
@IndRepair Ай бұрын
They can be under immense pressure
@ddrowdy2 4 ай бұрын
Yupp, works pretty good, been my go to method for many years. I remove the valve core and use an plain air fitting with no chuck to get more airflow. Just get everything ready, slip the fitting into the air hose and stick the open end over the valve stem, works great.
@IndRepair 4 ай бұрын
Awesome tip! Thanks for watching!
@dannycunningham4132 25 күн бұрын
This works!!!!! Thanks so much 😊
@IndRepair 25 күн бұрын
Thanks for watching! Glad to help!
@frankrobinson5453 12 күн бұрын
Great tip that works well. For me, I've never had to remove the valve core and have re-seated my lawn tractor tires a dozen times. Yes, I have a slow leak I've not addressed.
@IndRepair 12 күн бұрын
Thanks for watching! With this method we do not have to remove them often but some tires are more difficult than others
@laurakilmer8652 3 ай бұрын
Great video Thanks
@IndRepair 3 ай бұрын
Thanks for watching!
@antjuanmanns2738 17 күн бұрын
Thanx man, you are the boss! Worked perfecto!😃
@IndRepair 16 күн бұрын
Awesome job!
@robantonelli5331 3 ай бұрын
I tried that on my boat trailer tire it worked . 👍
@IndRepair 3 ай бұрын
Awesome news! Thanks for watching!
@mattthompson3656 10 күн бұрын
This saved me!!!! Thanks!
@IndRepair 10 күн бұрын
Glad it helped!
@LarsDcCase 4 ай бұрын
Good video.
@IndRepair 4 ай бұрын
Thanks for watching!
@marciacunningham5877 4 ай бұрын
I bought solid rubber tires (the kind that look like inflatables) for my dolly. A little too hard, but they work and don't go flat. Michael
@IndRepair 4 ай бұрын
Definitely a plus! Thanks for watching!
@trooper2221 4 ай бұрын
Excellent. Thanks
@IndRepair 4 ай бұрын
Thanks for watching!
@casycasy5199 21 күн бұрын
great tips
@IndRepair 21 күн бұрын
Thanks for watching!
@johnslesinger7109 4 ай бұрын
For a stubborn one, I bypass the inflator tool as it restricts the airflow. Also I always use grease gun grease. Never seen it hurt the tire. Used the same process on 10 ply skid steer tires.
@IndRepair 4 ай бұрын
The inflator definitely restricts flow, good info!
@bertgrau3934 Ай бұрын
I use either dish washing liquid, or clothes washing liquid. Makes a great lube and won't hurt the rubber
@IndRepair Ай бұрын
Interesting! Thanks for sharing!
@michaeld53 4 ай бұрын
A can of starter fluid, spray liberally. Then light it, tire pops onto the bead!! We also used to have an inflatable tire belt to wrap around the tire.
@IndRepair 4 ай бұрын
There is a little more to it than that but it definitely works well if done right. I just hesitate to tell a homeowner to use this way. Thanks for watching!
@billstapleton8833 2 ай бұрын
I have used starter fluid to spray inside tire and toss a piece of paper that has been set on fire, towards the tire ,usually a loud pop ,but tire is inflated,not recommended to the general public .....
@IndRepair 2 ай бұрын
Definitely works well if you do it right. Thanks for watching!
@Stuart68505 18 күн бұрын
There is a tool called a valve core removing tool used in hvac service which enables you to remove the valve stem & store it in the tool while charging through an additional port on the tool. When you are done evacuating or pressurizing, you can reinstall the valve stem without losing air.
@IndRepair 18 күн бұрын
Interesting there! Thanks for sharing!
@epmcdonald4562 17 күн бұрын
Good but don't need it .... once it's seated and airing up... just put valve core back in ... best to have tire off mower and no pressure from mower.
@charliepearson1678 4 ай бұрын
one thing anyone having this problem needs to know and dude here didn't mention here . Is those tires are very thin walled so when they are cold that rubber is not gonna want to conform back into its round shape . so what you will need to do is work on it in a heated area . your gonna want to let that tire come up what ever the room temp is (hopefully thats around 70 degrees or better ) and that will help in getting that rubber to seal better on the rim .
@IndRepair 4 ай бұрын
Some warmth definitely helps out!! Thanks for watching!
@toddrussell9146 4 ай бұрын
I got a pail of Xtra Seal Euro Paste for under 20 bucks. It's the same as the stuff we use to call tire soap. It does the same thing sealing the tire so you can put air in the tire. once it seals you scoop it off the rim and put back in the pail and use it again, it washes off with water. Not only do we use it on these tires but we also use it on car tires as well.
@IndRepair 4 ай бұрын
Awesome! Thanks for that! Is this stuff really thick? I used to get the Bead Buster under another name in 2.5 gallon buckets I believe. It would last about the season. Now I try to be a lot more sparing with it and do not use it as often since the price i6 60 for 3lb now instead of a few gallons. Thanks for watching!
@777-Phil 3 ай бұрын
Thumbs up. Utmost blessings! Now I can get dangerous again and hopefully cheat another year with these seasonally flat tires.
@IndRepair 2 ай бұрын
Awesome! Thanks for watching!
@pauljanssen7594 12 күн бұрын
Isn't that one of the reasons they make starting fluid for.😊
@IndRepair 12 күн бұрын
Thought they invented it for that reason lol. Works well in certain circumstances
@SwordWall 4 ай бұрын
Learned this trick growing up on a farm when I was kid.
@IndRepair 4 ай бұрын
It works well! Thanks for watching!
@manuelsaddler677 20 күн бұрын
Thanks alot Strap works 💪
@IndRepair 20 күн бұрын
Right on!!
@patrickpoulard24 4 ай бұрын
Those dry rotted tires should just get inner tubes put inside them. I did that exact thing with my snow blower tires. Keep up the good work 😊👍🏿
@IndRepair 4 ай бұрын
This one is a mower we are selling, otherwise we definitely would have tubed it. Thanks for watching!
@KSMike1 4 ай бұрын
Great intro. Be careful in the ice!
@IndRepair 4 ай бұрын
Ice covered it is today! Thanks for watching!
@ralfie8801 Ай бұрын
The thick stuff for seating tires is soap based and once you’ve got it filled with air, you can scrape that stuff off and put it back in the bucket. Then you can wash the rest off with the water hose. That doesn’t work at all if you use regular old grease.
@IndRepair 29 күн бұрын
Correct there! Thanks for watching!
@jeffreyhickman3871 3 ай бұрын
Keep a handy magnet 🧲 around your shop to retrieve dropped items. It looks like 👍 that part flew off. My easiest way is to tie a shoestring to a speaker 🔊 magnet 🧲, and drag it around on the floor. Or use a telescoping magnetic 🧲 pickup 🛻 tool. Just subbed!! Your friend, Jeff.
@IndRepair 3 ай бұрын
Thanks for the tip and for watching!
@jimmysmall330 Ай бұрын
Put the tire under water it pumps rite up every time air it up while it's submerged
@IndRepair 29 күн бұрын
Great tip!!
@mikesantimore6971 4 ай бұрын
Really excellent video right to the point you're a good teacher
@IndRepair 4 ай бұрын
I appreciate that! Thanks for watching!
@donschneider7252 4 ай бұрын
I have used easy glide or soap or water on the beads then sprayed some staring fluid in the tire; tossed a burning piece of paper at the tire with the air chuck already flowing.On the bigger tires it beads right away. Keep your fire extinguisher handy or a spray bottle of water, I have never had a problem this way but one of those air drop tanks would be a lot safer if handy. When a big tire is off the bead in the field You work with what you have Stand back doesn't always work well in the wind don't use too much ether. tractor tire takes about 2-3 seconds spray.
@IndRepair 4 ай бұрын
Great tips I just don't trust most people to do this safely. Thanks for watching!
@frankwhite1288 17 күн бұрын
Little starter fluid and a bic lighter works great.
@IndRepair 16 күн бұрын
When done right works well
@peanutman6593 2 ай бұрын
I can’t believe people don’t know this already
@IndRepair 2 ай бұрын
Definitely! Thanks for watching!
@robertmichael6644 4 ай бұрын
I have a pressure washer that both tires separated from the bead. Tires wouldn't air up so I looked around my utility room and found some syl glide. Said it was safe on rubber so I used that to lube the wheel and tire rim. So far it's working on both tires
@IndRepair 4 ай бұрын
Awesome!
@IndRepair 4 ай бұрын
Is it thick or a thin grease? Thanks for watching!
@dubmob151 3 ай бұрын
Thin, used it in brake caliper hardware lubricant applications
@dougclarey3241 4 ай бұрын
We use Murphys tire lube,also works 4 22.5 truck tires,never saw it sold smaller than 5 gal pail
@IndRepair 4 ай бұрын
Awesome! Thanks for watching!
@davidkeeton6716 4 ай бұрын
That's called a bead expander. Normal tool in a tire shop. Well, in a tire shop they are usually basically an adjustable length inner tube wrapped around the tire that when aired up it squeezes the tire, so, same thing.
@IndRepair 4 ай бұрын
Never have I seen or heard of this. Great info! Thanks for watching!
@haywire17 3 ай бұрын
I have used all of these tricks with some success. However, for the same reason there is more than one type of "glue" in the world, you have to have more than one method (tools in the mental toolbox) to make use of. A trick I have used on rear mower tires would have worked wonderfully on the last one you showed with no grease, and no strap (because it had one SEATED bead). Simply jack it up like you had, have an assistant triggering the air while you pull forward on the outer edge of the tire. (It can be done holding the inflater in same hand) This flexes the sidewalls enough to bring the bead into contact with the area of the rim for the air to finish pushing it on. I have even used this trick on the floor, when mounting new tires that come flattened (particularly nasty). I have used the rounded end of a tire tool to "mechanically seat the inside bead" over the little lip of the inside rim. You have to make sure you have it on there good, so you don't pull it off in the step where you pull out on the tread edge of the tire.
@IndRepair 3 ай бұрын
Great tips! Thanks for watching!
@ghostshadow9046 2 ай бұрын
Know a guy shop was out of tire lube, A water soluble lube to help mounting tires so he used gear oil... got the tires on when out and stomped the gas and spun the rims inside the tires. I use liquid dish soap mixed with water to check for leaks, have seen simple green remove paint
@IndRepair 2 ай бұрын
That Is interesting there! Simple green, if you use in a concentrated amount, can make paint soft. I never saw it remove the paint on something but it would make sense! Thanks for watching and for your insight!
@user-ot9yf2pr6g 4 ай бұрын
I use mule tape , nice tip taking out the valve
@IndRepair 4 ай бұрын
Nice! That would probably work well! Thanks for watching!
@dennishein2812 3 ай бұрын
Use to use starter fluid or tire soap on semis . Didn’t have a air ring like the tire busters. If you pull it of and can get a bucket or strong metal can that fits inside the rim you can set the wheel on it and push the backside onto the rim then you only have to worry about one bead.
@IndRepair 3 ай бұрын
Great tips! Thanks for watching!
@geyser3445 3 ай бұрын
Haven't had much luck with the strap idea. Just seated 2 really flat tires yesterday wit h a shot of carb cleaner and a torch. Always wear goggles.
@IndRepair 3 ай бұрын
Definitely! Thanks for watching!
@ralfie8801 Ай бұрын
The thick stuff for seating tires is soap based and once you’ve got it filled with air, you can scrape that stuff off and put it back in the bucket. 5hen wash the rest off with the water hose. That doesn’t work at all if you use regular old grease.
@IndRepair 29 күн бұрын
Definitely!
@eCitizen1 8 күн бұрын
I always just add an inner tube. Easy and lasts a really long time.
@IndRepair 7 күн бұрын
A tube works well for certain issues
@badron9245 4 ай бұрын
After 40 years in the trucking business, I've aired up many truck tires with ether, also car tires, m/c tires and lawn tractor tires. Finally got smart and put tubes the leakers. The problem is the cheap Chinese tires after a couple of years will start to leak through the sidewalls.
@IndRepair 4 ай бұрын
The Carlisle tires we see are made in US or Canada normally I think but they obviously make them cheap as possible. We see a lot of Locust trees around here so people will use solid tires or something like premium tire sealant (similar to Slime) Problems like what is shown on the Craftsman tire here are cause from the tire being flat and sitting like that outside from what I normally see. Thanks for watching!
@jimrankin2583 3 ай бұрын
Your automotive tire store should have large pails of tire mounting soap Better consistency than your bead buster for packing into the gaps and LOTS cheaper. I can’t function without a pail of it on the farm, so I buy it by the pail. I’m sure any tire store will be glad to sell you some in a small container, but keep it tightly covered or it’ll absorb moisture and turn into slop that won’t pack into gaps. Makes a great bead lubricant with a little water but won’t pack in gaps
@IndRepair 3 ай бұрын
Thanks for the tips! This one dried out real bad if the top is off so may be different but sounds like a lot cheaper! Thanks for watching!
@davidhargrove1648 2 ай бұрын
Thanks for this video. We have two John Deer mowers and a New Holland tractor at a very remote mountain tract. I’ve learned a lot of repairs out of necessity and this is great repair knowledge. I’m curious how large a tire will I be able to set this way. I’m gunna say all but the very large rear tractor tires but I’ll cross that bridge when it comes. I have seen the explosive starter fluid method used on large tractor tires but not yet had to try it, wonder how well that works.
@IndRepair 2 ай бұрын
It works well when done right and have air hooked up already... Takes a ton of cleaner sometimes on thick/stubborn tires. I do not recommend it. Thanks for watching!
@johnnelson8714 Ай бұрын
Try a thick cooking shortening.I've gotten that to work about 80% of the time. What works the other 20% is using a blow gun pointed at the rim while putting air into the stem. Be sure the back of the tire is seated against the rim.
@IndRepair Ай бұрын
Great tip!
@davesponaugle9918 4 ай бұрын
If you have a large pipe supply that sells larger sewer and water line, they have an O ring seal in the joints. They also have a pipe joint lube, vegetable based soap in paste form. It will work well as a substitute bead buster. And the great part, it is not expensive.
@IndRepair 4 ай бұрын
Nice info! Thanks for watching!
@michaelmailheau1511 4 ай бұрын
Yes That's great advice: it's called Ty Seal gasket lubricant: used on Cast Iron Hub gaskets mostly on sewer lines under slabs ..."Excellent Notion"...( quote from my favorite movie)
@IndRepair 4 ай бұрын
@@michaelmailheau1511That is great, I will be getting some soon! Thanks again!
@carlspiess1614 4 ай бұрын
Try Murphy's oil soap in paste form,our tire man uses it to set big truck tires
@IndRepair 4 ай бұрын
@@carlspiess1614 It looks like Napa has it down the road, I am going to get a couple different ones and figure out what works best. Thanks for the tip!
@lewiemcneely9143 3 ай бұрын
Regular gun grease works fine for beading up. I never used anything else for vehicle and mower tires. Thanks
@IndRepair 3 ай бұрын
Thanks for the input and for watching!
@lewiemcneely9143 3 ай бұрын
U 2!@@IndRepair
@KensSmallEngineRepair 4 ай бұрын
Used this method many times on those pesky tiny front tires on Snapper RER's. What a PITA! Thanks for the vid!
@IndRepair 4 ай бұрын
Haha I wouldn't be hurt if I never saw another one of those! Thanks for watching!
@rickdavies4801 Ай бұрын
Thanks Thanks Thanks
@IndRepair Ай бұрын
Thanks for watching!
@rolop847 2 ай бұрын
I learned this with a rope and a screwdriver, I've only had to use 1 rope and fill every tire I need to inflate. (Learned from an older person)
@IndRepair 2 ай бұрын
It is amazing how simple things can be sometimes! Thanks for sharing and for watching!
@Bitterrootbackroads 14 күн бұрын
Tire shop guys maybe hate green slime type sealer. I mess with aging freebie type equipment & make small yard trailers out of spare tires / wheels. I give all those recycled tires a squirt of the green goo. Beats adding air all the time, or the flats you are dealing with.
@IndRepair 14 күн бұрын
Slime will rust your rim eventually and is a mess to clean up when in a tire. We use Liquitube premium tire sealant instead since it does not rust then out (still a mess)
@Mikemeshell63 Ай бұрын
I have done it with just cheap car air pump.i took my belt off put it around middle of tire pulled tight it pushes tire in middle aired up perfect,dont need big air.
@IndRepair Ай бұрын
Very true, just have to be much more precise with the tire positioning when using an air pump
@clivewilliams3661 26 күн бұрын
The Icelandic method is to fill the tyre with butane gas and ignite it! Blows it back on a treat.
@IndRepair 25 күн бұрын
Lol!
@jimmysmall330 Ай бұрын
Sometimes the hole is too small on the inside of the tire for the slime to stop it. Stick an awl or ice pick all the way through the tire and roll the hole to 6 o'clock and it's done
@IndRepair 29 күн бұрын
Great tip there, seen this happen before
@glasslinger 4 ай бұрын
The indian gasoline-barbecue lighter method is a lot more fun and will pop out the most difficult tires!
@IndRepair 4 ай бұрын
Haha!!
@FloydBlack-xi8fh 4 ай бұрын
We used axle grease on car and truck tires as well as on farm wagons and machinery. It worked most of the time. The few times it didn't was because we didn't use enough.
@IndRepair 4 ай бұрын
I try to be stingey with this but at $20 a pound it is a no brainer. With axle grease and the cost it would be much cheaper!
@FloydBlack-xi8fh 4 ай бұрын
We had 5 gallon pails of grease. We used a lot on the machinery so it was worth getting that much.
@IndRepair 4 ай бұрын
@@FloydBlack-xi8fh I would get a 5 gallon pail if I could, would come in handy
@stevewheatley243 3 ай бұрын
I usually take a wheel off and bounce it around while adding air. Works pretty good.
@IndRepair 3 ай бұрын
Awesome tip! Thanks for watching!
@Sylvan_dB 3 ай бұрын
Done this several times, even on larger tractor front tires. I leave the strap in place while I put in the valve core. My lawn tractor tires are old enough to drink in every state. The front two and I think just one of the rear are running tubes now.
@IndRepair 3 ай бұрын
It definitely works well. Thanks for watching!
@user-tc3ou6sy5f 2 ай бұрын
Use either..... a good puff " in " the tire......and hold the tire centered with hands on the outside of the tire. Light it. PUFF instantly seated ! Have the air compressor at the ready. Pump it up.........ready to go ! Have to act fast before the pressure is released from the either puff ! It will pop !
@IndRepair 2 ай бұрын
It works if done right in most cases. I always used a little different method for the starting fluid. I think this way works more reliably and is safer for many reasons. Thanks for the comment and for watching!
@YourLocalCountryBoy23 4 ай бұрын
My Jd slid down a hill done took it off the rim but i hooked air to it and put a brick under it and pressed on it containing the air and popping the beads back in place a rathchet strap could help also but i didnt take out the stem or anything applied air while ratching and it worked
@IndRepair 4 ай бұрын
Awesome! Great job! Thanks for watching!
@YourLocalCountryBoy23 4 ай бұрын
@@IndRepair how cold is it for ur mower to do a cold start it was 22°F and it hsd a bit of trouble
@IndRepair 4 ай бұрын
Found a bad ground connection by the end of the project. I thought it was a valve spacing issue but after adjusting the opposite side valves with no change (needed to be done anyway) I went through the electrical
@IndRepair 4 ай бұрын
@@YourLocalCountryBoy23 After the other side valves were adjusted, I was finishing the tune up and checking everything out and found the ground wire was corroded and partially loose. I cleaned everything up, checked and re-installed contacts and it turns over well now. These engines should turn over good no matter the temperature (of course depending on what oil you are using and the battery capacity). Thanks for watching!
@johnreichert8958 4 ай бұрын
Murphys oil soap is just about the same thing as your bead buster, it works good
@IndRepair 4 ай бұрын
Great tip! I will grab some soon. Thanks for watching!
@trevorferguson1994 4 ай бұрын
Decent advice for those who wish to fix there own tires with little or no experiance. I personaly would never use the strap method I would just use ether. Don't take me wrong i understand VERY well why you would not recommend using ether BUT i have been doing tires profesionaly for decades so experiance is on my side 😉. If you are being paid for your work then invest in a bead blaster it will save time and headaches.
@IndRepair 4 ай бұрын
This is very true about having the right equipment if doing it often. The reason I know about these methods is before we started using a bead blaster this is how we put on most tires. I usually inflate a tube in them overnight and they go on with some lube extremely easy the next day. It is still faster sometimes just to grab a strap. Thanks for watching!
@thomasambers9977 5 күн бұрын
Brake clean and a lighter done in 2 seconds
@IndRepair 5 күн бұрын
If done right it works well in most cases. I will have it done with a strap just as quick
@foxtrottango8745 3 ай бұрын
When I was a professional small engine mechanic, I would use a shop heater to warm up the tire in winter especially new zero turn tires… I also used the strap trick and grease and seeing that you are paying a hi price for that bead buddy try using Crisco? to be honest I never used Crisco just bearing grease but Crisco might be an affordable solution?? I will definitely try it myself the next tire I need a little extra help? (SEM Ret due to a disability) Like your video. 👍😎👍
@IndRepair 3 ай бұрын
Heat definitely works, especially if it is cold! This thick grease (I guess it is tire soap) works best far as I can tell. Thanks for watching!
@455buick6 4 ай бұрын
You can do the same thing with a chain and a screwdriver by wrapping the chain around the tire same as the wratchet strap, then stick a screwdriver through the chain and twist, this will tighten up the chain same as the strap, then add air
@IndRepair 4 ай бұрын
Definitely a great tip! Use what you have, I love it! Thanks for watching!
@rolop847 2 ай бұрын
Also I never took out the valve stem and it still worked
@IndRepair 2 ай бұрын
That is very interesting, sometimes it seems like there just is not enough volume for this to happen with large tire gaps
@lodwill5116 4 ай бұрын
You mean fer 40 years i could have Ben doing this. Ain’t no way !!😮
@IndRepair 4 ай бұрын
Haha
@user-vq3ez2cg5x 4 ай бұрын
"If you're not familiar with how a rachet strap works" rtfm. Open the strap to its fullest and it releases the tension. Try it!
@IndRepair 4 ай бұрын
Haha!
@JT-dx1qk 4 ай бұрын
My thought exactly , he's releasing it the hard way
@sotm6078 4 ай бұрын
They actually do make an "E" clip tool for removing and re-installing them!!
@IndRepair 4 ай бұрын
Interesting!!
Chickanic
Рет қаралды 2,7 МЛН
Marat Oralgazin
Рет қаралды 403 М.
Mechanical Mind
Рет қаралды 169 М.