Industrial Design Sketch Process Part 01/03

Рет қаралды 79,409

Күн бұрын

I'm planning a 3 part video to take you through my design process from early ideating to final render. This is the 1st part of that series.
Hit like and subscribe if you enjoyed this video!
If you like these videos and want to support me maybe buy me a coffee at ko-fi.com/robertlkiss
Or take a look at my Gumroad:
gumroad.com/robertkiss
Kevin Melon and Hudson Rio brushes can be found here:
drive.google.com/drive/folder...
You can get prints of my Black Panther Art Nouveau series here: society6.com/kissdeisgn
Web: www.robertlkiss.com/
Instagram: / robertlkiss
Twitter: / kissrobert
Artstation: robertlaszlokiss.artstation.com/
Behance: www.behance.net/kissrobert4a1c
-------------------------------------------------------------audio-------------------------------------------------------------
Good For You by THBD / thbdsultan
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Good For You - THBD (N...
Ikson - Last Summer
Listen to this track on SoundCloud:
/ ikson-la. .

Пікірлер: 105

@acbc5781 4 жыл бұрын

as a new industrial designer, i was looking for a inspiration for exercise, now im ironing my rooms wall and eating a sport shoe 3 times a day, thank you master!!

@robertlkiss 4 жыл бұрын

Thank you for that you made me laugh :D

@arildamland 6 жыл бұрын

YES. I really like this type of video! Can't wait 'till next week!

@robertlkiss 6 жыл бұрын

Arild Amland thank you I'm really glad to hear that, hope next week's video will be to your liking as well :)

@abhijhala7784 4 жыл бұрын

Wow..for beginners it was good to know how to get rid of ideas that are bothering!Very helpful video🙌🙌

@robertlkiss 4 жыл бұрын

Very happy to hear that you found my video useful :)

@jlee7275 4 жыл бұрын

Great video. And wonderful narration of design process.

@robertlkiss 3 жыл бұрын

Thank you very much!

@irionty 5 жыл бұрын

YOU, MASTER ! 🙌

@robertlkiss 5 жыл бұрын

Than you, I wouldn't go so far but very kind of you to say that ^_^

@3BBer 5 жыл бұрын

Thank you!!!

@samiier3324 Жыл бұрын

From draw a box to your chanel in a matter of time. Really useful

@robertlkiss Жыл бұрын

Glad you find it useful!

@littleatwork 5 жыл бұрын

thanks for sharing your process

@robertlkiss 5 жыл бұрын

Thanks for checking it and commenting!

@sythe263 7 ай бұрын

I am doing bachelors degree in design and my professor gave you this video!

@robertlkiss 7 ай бұрын

I hope it was helpful :)

@isaacyanez7996 6 жыл бұрын

nice video like always (and also,i saw that superman comic ,nice easter egg)

@robertlkiss 6 жыл бұрын

Isaac Yanez thanks man. That is my little common corner a lot of things hiding there :)

@jacquesduplessis8944 4 жыл бұрын

I'm teaching myself to draw and your videos are inspiring and very informative

@robertlkiss 4 жыл бұрын

I'm very happy to hear that my videos are helping you on your journey to learning drawing!

@vaseelaamidon2166 3 жыл бұрын

Same applies on me!!!!! Love the videos And the introductions are ridiculous !!! Kepp it up 😁

@gregoryallenn_ 2 жыл бұрын

Keep It Up Man

@s.m.m.qq.4832 2 жыл бұрын

Pushing video thanks.

@sifirincisaniye 4 жыл бұрын

Great video thanks :)

@robertlkiss 4 жыл бұрын

Happy to hear you liked it!

@ronmaren4135 4 жыл бұрын

thanks

@robertlkiss 4 жыл бұрын

Thank you for taking a look :)

@rowesyx7963 3 жыл бұрын

crying at the intro

@robertlkiss 3 жыл бұрын

One of my more intellectual intros XD

@shaffera17 4 жыл бұрын

Hey! Great tutorial series here. I'm trying to brush up my digital ID sketching in PS/AI (see what I did there?) and I can't remember how to manually brush along a path. I don't mean add a stroke to a path but rather create a shape, like an ellipse, and use either my mouse or my graphics tablet to create lines that are anchored to that path kinda like you did at 4:50. I can't seem to find that function and would really appreciate the help! Oh and I'm using the Adobe suite, not sketchbook

@robertlkiss 4 жыл бұрын

Thank you. As far as I know, photoshop does not have that capability, best you can do is use the pen to and then stroke it with brush fade away option. That is why I use sketchbook in this case because it's just much more convenient if you wanna do stuff like this.

@khj5582 4 жыл бұрын

This is high quality youtube content. May I ask why you use digital sketching for your "napkin" sketches? Wouldn't you get your ideas out faster with paper and pen/pencil which is a more natural medium? Or did you choose it for better presentation on a youtube video?

@robertlkiss 4 жыл бұрын

Thank you. It is a good question but I don't have a precise answer. Sometimes it really just comes down to how I feel. On some days I like the digital marks I set down satisfy me more on other days I want to hear the scratching of the pen on paper. On the other hand there is really no difference in speed between digital and traditional if you have the self control not to undo.

@zzzz6355 4 жыл бұрын

how long it took to reach your level. How much passion is there to get to this level. This is too good, I am a mechanical design engineer myself and I couldnt even draw a circle yet. All i can do is just solidworks all the way

@robertlkiss 4 жыл бұрын

As you said it is about passion. I always loved to draw. I've been drawing ever since I know myself so that is at least 25 years of drawing so far :) You just have to keep at it, draw a bit every day and slowly it'll be easier and easier

@hemanthkhappal8408 5 жыл бұрын

No one knows your talent I'm with you

@katya-suleymanova 3 жыл бұрын

how do you do so clean lines? I have skills of academic drawing, but it is very hard to me. I am sitting fr a last week to practice it. p.s your sketches of robots are awesome and inspiring!

@robertlkiss 3 жыл бұрын

Well I do a lot of dirty lines on one layer and clean them up on another one. There's a lot of pre sketching and hiding bad lines, don't trust people on the internet ;)

@leandrogerardo9521 3 жыл бұрын

Step outside the box...😏, pun intended.😅

@robertlkiss 3 жыл бұрын

I appreciate a good pun!

@10MinuteDrawing 6 жыл бұрын

OMG that's nice coloring😮😮😮😮😮😮😮😮😮😮😮😮 kkkkk

@robertlkiss 6 жыл бұрын

10 Minute Drawing thank you very much ^^

@mahrokhkia5746 2 жыл бұрын

Are you sketch with a mouse or graphic tablet? BTW your channel is awesome

@robertlkiss 2 жыл бұрын

Thank you, I am sketching with a graphic tablet.

@amitkumarmahato8352 3 жыл бұрын

Which software are you using ? Please let me know.

@oliviagil799 2 жыл бұрын

I'm pretty sure he used Autodesk Sketchbook, if you have a mac it is very easy to get it, idk for other laptops tho

@kimbarsegyan 3 жыл бұрын

You are notified. It's now time for a break. Or whatever.

@robertlkiss 3 жыл бұрын

You have to take care of your health no. 1 rule!

@manvifotedar4339 4 жыл бұрын

Do you use any steady stroke settings or predictive stroke at all? I've just begun using a wacom intuos and looking at the screen while sketching is still new to me, any suggestions would be really helpful !

@robertlkiss 4 жыл бұрын

I do but only rarely if I need to get a line super clear, but I would say 90% of the time I just do things by hand without any help.

@royceleejohn4814 5 ай бұрын

@@robertlkiss Hey ! I've been following your tutorials on fundamental of sketching, I must say I enjoy it !. I am a beginner & I've been using a paper and pen so far and was thinking of going digital. I've a basic wacom tablet (without display) so it'll be looking at a screen while my hand moves on the tablet . I understand that you use a Wacom tab with display. What do you think should i go with my digital setup and do whatever I did on paper digitally from now? Will it help me sharpen my skills both digitally and on paper? @manvifotedar4339 How's your experience so far?

@robertlkiss 5 ай бұрын

@@royceleejohn4814 what you have is good especially as a beginner it is good to 1st have a normal drawing tablet(and not a display tablet). it is going to feel weird for a couple of weeks, almost like you made a mistake and this will never work :) But once you are over the 1st two-three weeks of getting used to it it will feel very natural and actually quite nice that you can draw and your hand is not in the way of the picture that you are drawing.

@royceleejohn4814 3 ай бұрын

@@robertlkiss Btw, since I'm a beginner, will jumping to sketching digitally from pen & paper method help sharpen my skills on pen & paper as well ? Does it work that way? (Especially because in sketchbook I could use a ruler for drawing lines, ellipse tool instead of drawing it by free hand)

@robertlkiss 3 ай бұрын

@@royceleejohn4814 no it won’t, it might make them actually worse, there’s a lot of cheating that is working only digitally it is easy to get used to them and then missing those trick traditionally

@firstime Жыл бұрын

Hi Robert, what your advice on patent? it seems patent is not so protective?

@robertlkiss Жыл бұрын

Sorry mate I do sketching video don't know much about patents ^_^

@cerisse298 5 жыл бұрын

How long did it take you to do this sketching page?

@blocky1459 3 жыл бұрын

you probably shouldnt worry about that man, like these guys sketch so damn fast because its their job. But for beginners one page looking as good as that could take like 30mins to an hour. Especially if ur scared of ur exploration sketches looking bad (or not creative enough to come with ideas instantly) or don't know where to start in ur sketches

@ankitagarwal5245 Жыл бұрын

Hello Sir I also use autodesk sketchbook for drawing but i cant fit with any specific brush, i really like the flow of the one youre using could i please know what brushes did you use in this video thanks

@robertlkiss Жыл бұрын

In my latest videos I have links to the brushes I use in the video descriptions.

@TizedesCsaba 5 жыл бұрын

Hello, László! It is possible to use two tablet with Sketchbook? I want to use this program together somebody in same time?! Which software you use for screen recording? What you think about xp-pens for budget solution? About Autodesk ID: is this a simple registration at Autodesk?! (Because this program free for 7 days only after that required Autodesk ID and I do not know what does it mean exactly...) Thanks for your answers!

@robertlkiss 5 жыл бұрын

Hey Csaba. Sadly I don't kno0w of a way to collaborate with two people on sketchbook. Maybe try out something like 'Drawpile' For screen recording, I use OBS studio on my windows pc or Quicktime for my Mac. I am not familiar with the xp=pen but I see that the reviews are relatively good. Honestly, I started with a tablet, not a drawing screen. So I would say if you are starting with digital art/drawing you really don't have to go for an expensive Wacom. Se what you like and works best for you. About the Autodesk ID, I am sorry but I can't help you there. I bought a subscription to Sketchbookpro back in the day when it cost money. Ever since they went free sometimes I need to log in other times I don't, I really don't understand what they are doing. That is the only negative thing about Autodesk and Sketchbookpro. But I really hope other than that you enjoy the application!

@mrchristian8782 2 жыл бұрын

hello sir Robert, I am Christian, and I am curious about Industrial Design, I've already watch quite a few videos about Industrial Design, and I do really want to learn more about it especially to a person who is really in that Industry, like you, the reason why I am asking this is that I am looking for a job, and I think that I love designing, drawing, sketching etc, that is why I think that Industrial Design is a great job. My questions are: 1. How and where do I start in order to learn Industrial Design (ID)? 2. What are the qualifications? There are more questions that I want to ask, but for now, two questions are enough, I hope for your reply, greetings from the Philippines, God bless!

@robertlkiss 2 жыл бұрын

Hello, sadly I am not working in the industrial design field at all so I don't know how much help I will be. I studied it and it was fun but I earn my money with something like else. As for your two questions, industrial design usually is being taught at the University level as bachelors or masters degree. I studied Industrial and economical engineering for my BSc and then switched to industrial design engineering for my masters.

@TiffanyNg100 2 жыл бұрын

lol so random video at the beginning i lisn it

@vaseelaamidon2166 3 жыл бұрын

Are ya using a wacom tablet or a surface/touch screen lap?

@robertlkiss 3 жыл бұрын

I use a Wacom cintiq 13HD

@CesarAUribe-uy3qp 6 жыл бұрын

How come you open a Mac, and yet the screen capture is Windows?

@robertlkiss 6 жыл бұрын

WHy do u pay attention to detail like that? :D I have a MacBook Pro if I need to travel and work but I much prefer my desktop PC that I built myself which is much more powerful, due to it not being a mac :D

@DerNetteFette 3 жыл бұрын

which damn brush is that? searched around forever through all the options, but nothing looks as good as this one...

@robertlkiss 3 жыл бұрын

I updated the description with the link to the brushes.

@DerNetteFette 3 жыл бұрын

@@robertlkiss NICE, Thank youi!!!

@Gennix_ 8 ай бұрын

yo why are you ironing your walls - I finally found someone else who does this :)

@robertlkiss 8 ай бұрын

It's the secret of life man!

@bertgovaert7972 5 жыл бұрын

Gebruik je vaak isometrisch perspectief ?

@robertlkiss 5 жыл бұрын

Niet echt. Meestal gebruik ik 3 point perspective maar het kan gebeuren dat ik aleen 2 points gebruik als ik in een haast ben.

@bhavanasadiga9876 3 жыл бұрын

Heyy...may I know what kind of brushes you are using throughout the design process

@DerNetteFette 3 жыл бұрын

me 2!!

@robertlkiss 3 жыл бұрын

I put the link to the brushes in the description.

@onur007 5 жыл бұрын

Hi, what is your drawing tablet.

@robertlkiss 5 жыл бұрын

onur can it is a Wacom cintiq 13Hd

@tumelokgakololo Жыл бұрын

What software is this?

@robertlkiss Жыл бұрын

Sketchbook

@anakperak8001 3 жыл бұрын

What a software that u use sir?

@robertlkiss 3 жыл бұрын

It's called Autodesk Sketchbook. Take a look here: kzfaq.info/get/bejne/rNuKgZqf25_DnZs.html

@laxitachalal7318 3 жыл бұрын

Which software u use

@robertlkiss 3 жыл бұрын

Autodesk Sketchook

@bertgovaert7972 5 жыл бұрын

what drawing tablet are you using ?

@robertlkiss 5 жыл бұрын

Hey thanks for stopping by :) I use a wacom cintiq 13hd

@bertgovaert7972 5 жыл бұрын

Thanks ! btw nice work !

@amirulyusof3060 3 жыл бұрын

Can i know what software is that ?

@robertlkiss 3 жыл бұрын

it's called Autodesk SKetchbook

@BeStOfBaRi 4 жыл бұрын

I was more interested in knowing which brushes to use, how and when..

@robertlkiss 4 жыл бұрын

Gatto Gattez the brush choice depends on your taste. Pencils for line sketching and airbrush for rendering are two with which you can’t go wrong

@BeStOfBaRi 3 жыл бұрын

@@robertlkiss thanks a lot! But in this video I couldn't understand which one you were using... Because all the bush's buttons have the same colour...

@robertlkiss 3 жыл бұрын

@@BeStOfBaRi I only used one brush in this video the Kevin Melon pencil brush.