Hey, youtube! I made a video on how to replace the spark plugs on my Infiniti G37! Hopefully, this helps someone someday! Cheers! Subscribe: / @mcgo101 Keep your G37 running right with these NGK spark plugs! : amzn.to/3Qb87YW
Пікірлер: 85
@813becca3 жыл бұрын
This is exactly what I was looking for. I have to do this very thing to mine tomorrow. Very helpful video.
@McGo1013 жыл бұрын
Awesome, glad to help! Have fun wrenching :)
@enriquerodriguez18046 ай бұрын
Well done and explained , THANKS 👍
@jamesm64682 жыл бұрын
Crickets after he drops socket and disappears lol priceless.
@LuisOrtega-yx3us Жыл бұрын
Looool I was like why you acting like that wasn’t annoying haha
@ronaldshumway72613 жыл бұрын
Thanks so much for your video. Got a quote from infinity for 567 dollars. You have probably helped many people like me. Have almost 120k miles on 2011. Hope to get 175k before trade in.
@McGo1013 жыл бұрын
Hey glad i could help man! I think stealer-ships get enough of our hard earned cash already haha
@carlosmartinez-lm5iq2 жыл бұрын
I got 185k on a 2013
@markus360s Жыл бұрын
I’m at 194k on my 2011 g37x sedan
@jonathanchavez6921 Жыл бұрын
@@markus360s I’m at 171k man how much should a tune up go for ?
@itsjax29172 жыл бұрын
just replaced mine i smell a little bit of gas i saw it’s because i have to tighten my spark plugs more is that true? other then that the car runs fine
@esnyderamos Жыл бұрын
but definitely liked it thankya
@Xjnthn_2 жыл бұрын
Hi there, I have a question regarding removing the throttle body, when you put it back do u need to do an idle relearn? other than that super informative video
@McGo1012 жыл бұрын
I didn't as I tried bot to disturb the throttle body plates too much. Just quick clean and reinstall. No issues for me. Wouldn't hurt to do it by the manual tho
@nicholaswalrod12143 жыл бұрын
Hey i like your video. Did you use torque tools for any of the bolts or spark plugs. I do not have any torque wrenches and was wondering if I could still just do it by hand.
@McGo1013 жыл бұрын
Thanks man. Hope it helped. I didn't use any torque wrenches myself. Tight but not overtight like usual and you shouldn't have any issues.
@serenestateofbeing1062 Жыл бұрын
Use locktite as well so they don't get stuck!
@Jay-vl3rv3 жыл бұрын
I only have a 1/2 inch socket, do i need to get a 3/8? I’m not familiar with socket wrenches
@McGo1013 жыл бұрын
Yea u will need a 3/8s ratchet
@omara-g28473 жыл бұрын
Hey! helpful video im gonna do it soon following your steps! Just curious, did you unplug your battery and do you need to unplug it?
@McGo1013 жыл бұрын
Hey! i did not pull my battery terminal off but it wouldn't hurt to consult a shop manual quick just to be sure of the proper method. I have not looked at the manual but i am willing to bet it says to remove the negative terminal before completing the work. the reason i recommend checking the manual first is i did just have a startup and stall issue last week. when i looked it up it recommended cleaning the throttle bodies and the MAF sensors and doing the relearn procedure on the TB's. - So i would recommend disconnecting the battery, changing the plugs then cleaning the TB's and MAF sensors and doing the relearn procedure quick. just to avoid any issues down the road. Best of luck! keep us posted!
@Gilkie2 жыл бұрын
What manuals do you use, and how effective is it?
@McGo1012 жыл бұрын
Didnt use a manual.
@Martialmind983 жыл бұрын
Hi i would like to know where did you buy these spark plugs from a website?
@McGo1013 жыл бұрын
Yup i got mine from rock auto, waaay cheaper than local parts shops
@karrahwright81919 ай бұрын
What is the at piece called on the driver side of the throttle body
@McGo1019 ай бұрын
Not quite sure I sold the car abt a yr ago
@naypai37063 жыл бұрын
Did you do the idle check after you have put the throttle body back on?
@McGo1013 жыл бұрын
nope, i did not have to when i did mine. no issues.
@danielwilson50223 жыл бұрын
Unless you disconnect the sensor you shouldn't have to
@psycho99903 жыл бұрын
Do you have to replace the plenum gasket when changing the spark plugs?
@McGo1013 жыл бұрын
nope not to do spark plugs.
@Kai-gotglow8 ай бұрын
Yes you should don’t listen to him. The moment you need to change spark plugs you might as well do preventive maintenance on the valve cover gaskets. These crack and get hard over time. That way you don’t have to worry about a oil leak in the future. Not only that but there’s also the spark plug gaskets on the cover and if it goes bad then oil will leak on your ignition coils and spark plugs which can mess with your ignition process and cause misfiring. Better to be safe than sorry.
@Jay-vl3rv3 жыл бұрын
Did you have to gap these? They come in .044 out the box so I’m wondering if that’s fine
@McGo1013 жыл бұрын
Should be fine but worth double checkin in the manual quick to be sure
@Kyle_adcock2 жыл бұрын
Should I go with oem is there a cheaper plug I can use
@McGo1012 жыл бұрын
Oem all the way. Got mine on rock auto pretty cheap
@lealogisticsfreight21503 жыл бұрын
What tool and size bolt did you use to remove the throttle body?
@McGo1013 жыл бұрын
A star bit on a screwdriver and an Allen key is what I used to get them off. I can't remember what size off hand tho
@lealogisticsfreight21503 жыл бұрын
Thanks! I’m having trouble getting the hose off so that I have room...
@McGo1013 жыл бұрын
@@lealogisticsfreight2150 jus be patient and you will get it no prob!
@ghamdan94823 жыл бұрын
How do you know if you put the wrong coil pack in? Think I got mixed up and now car won’t start
@McGo1013 жыл бұрын
hey man, coil packs should only reach their respective cylinders with the wiring to the coils IIRC. If she wont start you may have to do the relearn procedures on the throttle bodies. best of luck!
@Vortex_one3 жыл бұрын
I have the same work coming next week. Should I change all 6 coils while I'm at it. Or are the spark plugs just fine
@McGo1013 жыл бұрын
I personally would just do the spark plugs.
@Vortex_one3 жыл бұрын
@@McGo101 Will do thanks for your reply!
@Worldshottestpariah2 жыл бұрын
This looks super easy so can any mechanic do this or are you specialized in working on infiniti ? It looks like it was so fast
@McGo1012 жыл бұрын
Not a mechanic but when ur broke u learn to do things yourself lol.
@Mr.Frost1814 ай бұрын
I'm noticing how everyone is skipping over the first spark plug on the passenger side that sits under the hose that I'm having a issue taking off
@Daniel-jk9ge Жыл бұрын
When I tried to put the bolt back on the coil the coil stays loose what should I do will that cause any problem? Should I put a washer on it ?
@McGo101 Жыл бұрын
Is the plug seated and coil on the plug fully?
@Daniel-jk9ge Жыл бұрын
@@McGo101 yea it seated good and everything all the other ones are tight expect for that one maybe I screw it in sideways or something cause when I try to tighten it more it get hard and the coil is still loose
@atomicfuxze49979 ай бұрын
would a 14 mm 3/8” spark plug socket work ?
@mmgio2 ай бұрын
no 9/16
@mmgio2 ай бұрын
i am sorry yes 14mm will work
@cristianbravo77693 жыл бұрын
Same for 2015 q40?
@McGo1013 жыл бұрын
If it has the 3.7 then yep.
@sakaj10 ай бұрын
Decent video but disconnected the battery cable which is prudent. Also clean throttle bodies while they are exposed with CRC cleaner
@curthall40966 ай бұрын
My Local Infiniti dealer want $599 to do this job! OH HELL NO!
@MetalDetailer11 ай бұрын
How long of an extension would you say is needed?
@McGo10111 ай бұрын
For the belt tensioner? Probly a foot long changing it from the top side
@MetalDetailer11 ай бұрын
@@McGo101 to reach the spark plugs
@McGo10111 ай бұрын
@@MetalDetailer oh my bad wrong vid, in both of my socket sets they came with a long ext that is approx 8 inches and that worked fine with a 3/8s ratchet and spark plug socket.
@MetalDetailer11 ай бұрын
@@McGo101 awesome thank you! Don’t worry about the wrong video thing. I do that too. Keep the videos coming!
@anthonyponce72212 жыл бұрын
You don't need to replace coils?
@McGo1012 жыл бұрын
dont have to unless your having issues with miss fire ect
@c.canno992 жыл бұрын
Drinking game take a shot everytime he says “uhhhh”
@McGo1012 жыл бұрын
I wing my vids. I dont write scripts as you can tell lol
@francescodibari83663 жыл бұрын
Non capisco la lingua si potrebbe sentire in italiano
@moneymike904 Жыл бұрын
Yet
@lewissmith2343 жыл бұрын
Did it start faster than before??
@McGo1013 жыл бұрын
Seems to be about the same for me
@BryanReyes-xj6dd3 жыл бұрын
When I start my car it takes long
@BryanReyes-xj6dd3 жыл бұрын
What are the best ways to Fixs that
@McGo1013 жыл бұрын
@@BryanReyes-xj6dd imo engines need air fuel and spark to run, clean air filters, plugs and clean fuel filters/injectors would probly aid in starting quicker
@lewissmith2343 жыл бұрын
@@BryanReyes-xj6dd Don't forget a strong healthy battery!!
@MegaVstromer3 жыл бұрын
Those T. B. are nasty!
@McGo1013 жыл бұрын
Haha yea they are.
@stevenlaubach72223 жыл бұрын
Just did my wifes power steering pump on hers what a pain in ass.
@McGo1013 жыл бұрын
Oh man I believe it lol. I'm worried about my gallery gaskets now too. That will be quite the job lol
@chrism.6191 Жыл бұрын
the power steering pump isnt bad on the g's. Just gotta know what you're doing. I did mine with a buddy in a hour and a half