So glad you guys took the time to create such a high quality instructional video. Very well done! 🤜🏼🤛🏼
@PrecisionLED3 жыл бұрын
Thank you for the support and for watching!
@crazyone10676 жыл бұрын
Cars of this caliber should have LED's standard.
@PrecisionLED3 жыл бұрын
Agreed!
@Aceking894 жыл бұрын
Great video! Just did this on my 2014 Q50 S and it was the same process.
@PrecisionLED3 жыл бұрын
Good to know! Thanks for watching!
@Solkistanew8 ай бұрын
You're awesome brother . Stay blessed !
@ptatohed44715 жыл бұрын
Very rad, thanks!
@PrecisionLED3 жыл бұрын
Thanks for tuning in!
@henry6833 Жыл бұрын
Thanks a lot that tape method to remove door led helped me out 👍🏽💯 subscribed
@larzDJ5 жыл бұрын
Thanks for taking the time to demonstrate how to do these bulbs. I would only add that you should wear thin latex gloves to prevent oil from your fingers from getting on bulbs.
@aviography4 жыл бұрын
No need, you are thinking of high temperature bulbs for headlights, these are low power, low heat LED's, no need to wear glove and wipe the LED modules clean etc.
@PrecisionLED3 жыл бұрын
Thanks for the advice!
@hadleighmurad2 жыл бұрын
What about the 2 small interior bulbs above our heads? Can that be pryed apart? I dare try it until I know it's doable. Cheers. Good video, which I came across it sooner, as I figured the others out myself! 👍
@TRIGGAMAN_LOCO Жыл бұрын
I need this info as well
@bennett48815 жыл бұрын
If anyone is wondering, i did this same installation on my 2014 and the process was identical.
@qzilla6205 жыл бұрын
Thanks i was about to ask that lol
@StylesBlender5 жыл бұрын
How do you do the dome light by the sunroof button ?
@aviography4 жыл бұрын
@@StylesBlender Not easily, those lights are soldered on the circuit board, so the assembly has to be removed and taken apart first.
@Aceking894 жыл бұрын
Same here! Just did it on my Q50 S and it was literally the same process.
@eriksarabia69334 жыл бұрын
aviography do you have a video of that?
@TheLegendOfSG5 жыл бұрын
A couple of tips as I did them: -you can use a flat head screwdriver -you don't need to remove the wire off the puddle lights, you can do as is -to get the bulb out of the door lights, pull them from one side and wiggle to loosen, and then pull from opposite side -For the door lights, push a flat head on the top and make your way to the clip and pull it out
@TheLegendOfSG5 жыл бұрын
However, disclaimer I would highly suggest doing what he shows in the video first. He is a professional and probably did everything properly and safely.
@StylesBlender5 жыл бұрын
Gurjit Singh how do you replace the little dome lights by the sunroof button?
@PrecisionLED3 жыл бұрын
Thanks for your input!
@Ihaveadashcam7 жыл бұрын
Finally someone changes glove box light on a car
@PrecisionLED3 жыл бұрын
Thanks for watching!
@williamgiglio34765 жыл бұрын
Great video! I bought and installed the interior lights as shown and was so impressed with the brightness that I would like to get the trunk light. Do sell them separately or do I have to buy the entire kit?
@PrecisionLED5 жыл бұрын
You can indeed purchase the trunk LED separately, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
@run_juan_run7 жыл бұрын
GREAT VIDEO!
@PrecisionLED3 жыл бұрын
Thanks for watching!
@user-fd8kg8yy2c2 жыл бұрын
Hello! Do you know how to change in q50 two lights near eyeglasses case. Help plz!
@05627169992 жыл бұрын
Which one is the same of front dome LED the 600 or 800 ?
@juliansanchez83672 жыл бұрын
Would it work for 2015 3.7?
@PitBot808 Жыл бұрын
Other than the vanity bulbs they all use the same bulb size ?
@michaelbrasco6 жыл бұрын
Thank you for the bulb replacement video. How about the front dome lights on the Q50 2016. There are two map lights. Can those be replaced?
@dougpender20095 жыл бұрын
In the owners manual it says they are LED, so really no need to change. Looks like it would be difficult though!
@PrecisionLED3 жыл бұрын
These lights we do have listed as factory LEDs, which are typically soldered to a chip and board.
@Mister_Majestic2 жыл бұрын
How much diff is it from the 2015?
@rafmpm3 жыл бұрын
is this same process for 2021 q50?
@DV8N13 жыл бұрын
Thanks for thorough video! Couple questions.. 1: My '18 seems to already have led license plate bulbs enclosed within the housing...so no need to replace? 2: How to test glove box? My, oem one, isn't lighting up so must be burnt out?..
@PrecisionLED3 жыл бұрын
Hi, thank you for tuning in! The license plate lights on the '18 are indeed stock LED so you cannot replace them. If you glove box light is not on when you open the glove box it has probably burnt out. Hope that helps!
@DV8N13 жыл бұрын
@@PrecisionLED Thank you for this insight!! Great product and very happy with them!
@Spetsnaz5172 жыл бұрын
What about the front dome lights?
@DimplesDon96 жыл бұрын
I commented on your other video the g37 which I didn't know that you have this q50 video conversion too which what I'm looking for. What color output temperature of led you used on all bulbs?
@PrecisionLED6 жыл бұрын
Thank you for your interest. For this installation video the 6000K color was used.
@ImportDomestic20066 жыл бұрын
Do you guys have the same interior lighting for the 2015 Infiniti Q70 & 70L? I’m also interested in the Infiniti symbol that goes on the grill that can light up and change colors.
@PrecisionLED5 жыл бұрын
Yes, that is correct, the Q70 and Q70L would use the same LED kit linked in the description. Also, the light you are referring to as the Infiniti symbol would be stock LED, which you cannot replace as it is soldered to a chip and board.
@braeganhuval96914 жыл бұрын
I was looking at the premium kit and I need the vanity mirror LEDS but when I search in your database they don’t look similar as the ones shown with the premium kit will they still work?
@PrecisionLED3 жыл бұрын
Please feel free to reach out to us at help@precisionled.com and we can clarify any specific questions you may have!
@nathanpettigrew15573 жыл бұрын
What’s the difference between standard and premium
@UnnecessaryPurchases6 жыл бұрын
I have a 2015 sport. Will this kit work for me? If not point me in the right direction please
@PrecisionLED6 жыл бұрын
Yes, this kit is indeed compatible with your vehicle, and the installation process would be identical to as shown in the video. You can find the direct product link in the description of the video.
@johnsomerville_5 жыл бұрын
Would this kit fit 2014 Q50? All lights that you changed looked no different.
@PrecisionLED5 жыл бұрын
Thank you for your interest. Yes, the kit used in the video (and in the description) are compatible with your 2014 Q50.
@MJPOWERUP153 жыл бұрын
What is the size of the led for the glove box? and do you sell just that led bulb alone or is it only in the kits? Thank you in advance!
@PrecisionLED3 жыл бұрын
This would be a T5 fitment, and you can find it here: www.precisionled.com/shop-by-led/automotive-leds/t5-wedge-led.html
@ustaarthur3 жыл бұрын
Do these LED replacement bulbs come in other colors besides the cool white shown in this video, such as a warmer light (towards the yellow warm color spectrum)?
@PrecisionLED3 жыл бұрын
The two colors we carry are the 6000K crystal white, which projects a warmer white color, and the 8000K cool white, which projects a cooler white.
@ustaarthur3 жыл бұрын
@@PrecisionLED Is the 6000K really warm or is it bright white?
@PrecisionLED3 жыл бұрын
It is a pure white, warmer than the 8000k but not warm like a yellow.
@MrWroclawiak4 жыл бұрын
Hi guys Nice video I got infiniti q50 2015 I have all done with interior leds The question is how to change dome lights to leds ??? I tried a little bit but i don`t want to brake it
@delanx163 жыл бұрын
Did you ever figure it out?
@PrecisionLED3 жыл бұрын
The dome lights we have listed are already factory LEDs.
@leandroborrell24096 жыл бұрын
is there a package for 2018 q50 red sport 400? or would the premium fit?
@PrecisionLED6 жыл бұрын
Thank you for your interest. The Premium kit listed in the description would be compatible with your 2018 Q50 Red Sport.
@compacheo6035 жыл бұрын
Wonder why the rear dome lights arnt led like the maximas 17+. Since infinity is the more upscale version than Nissan 🤷🏻♂️
@ptatohed44715 жыл бұрын
Infiniti
@PrecisionLED3 жыл бұрын
🤷♂️
@abiramgonzalez13494 жыл бұрын
Will this fit my 2017 q50 premium
@PrecisionLED4 жыл бұрын
Yes, that is correct, the LED kit listed in the description is compatible with your 2017 Q50.
@notjustwes992 жыл бұрын
If I want to have bulbs that are closest to the 2 dome lights in the front, should I go for the 6000k or 8000k?
@kadeemrobin2 жыл бұрын
I know this is a month back but the front dome is pretty warm, I think they’re like 5k. I went too cool on my leds with 8k
@unknown-nx7bnАй бұрын
how to change the map lights?
@thuglife3153 жыл бұрын
Hi! How about footwell lights??
@PrecisionLED3 жыл бұрын
This car did not have footwell lights, but if we come across the same model that does we will do an updated installation video!
@jawadqamar777 жыл бұрын
Is there anything different in the 2015 Q50? Otherwise, do you a set that fits the 2015?
@HRodMusic7 жыл бұрын
Im wondering the same thing
@PrecisionLED3 жыл бұрын
We do have a kit for the 2015 Q50: www.precisionled.com/infiniti-q50-premium-led-interior-package-2014-present.html
@brianmartinez3409 Жыл бұрын
How do you remove the whole interior light
@imDnice Жыл бұрын
Will this work for 2017 infiniti q60
@PrecisionLED Жыл бұрын
Yes, that is correct!
@DaveXPark5 жыл бұрын
What is the size of the trunk light bulb? I have a 2018 Q50 Luxe
@PrecisionLED5 жыл бұрын
Thank you for your interest. The trunk would use a T10 fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
@vladislavnkoverdyuk94295 жыл бұрын
How do you change high beam bulb for headlights
@Pradeep-ym9ym3 жыл бұрын
What size did you say for the vanity mirror ?
@PrecisionLED3 жыл бұрын
This would be a 29mm x 5mm fitment, which you can find here: www.precisionled.com/festoon-29x5mm-2-smd-led.html
@chiahong21147 жыл бұрын
why not use the 5730led for license plate light?
@PrecisionLED3 жыл бұрын
We have found that the standard LED works better for license plate lights.
@JepoyIgana6 жыл бұрын
Does these lights work on 2017 q50 red sport?
@PrecisionLED6 жыл бұрын
Yes, we do have listed the installation process for your 2017 Q50 would be identical to as shown in the video. You can find the compatible package for your vehicle in the description of the video.
@NorCalBowler6 жыл бұрын
Is this install with the 8k Cool whites? I want to match my stock ones (that I’m not replacing) as close as possible.
@PrecisionLED6 жыл бұрын
The 6000K color temperature is used for this installation 6000K would be the best choice when trying to emulate your stock LEDs.
@drewluvcologne77325 жыл бұрын
What size is the visor bulb?
@PrecisionLED5 жыл бұрын
The vanity mirror would use a 29mm bulb, which you can find here: www.precisionled.com/festoon-29x5mm-2-smd-led.html
@CrazeyP3 жыл бұрын
So what’s the real difference between standard 8000k vs premium 8000k lights
@PrecisionLED3 жыл бұрын
This video explains the differences: kzfaq.info/get/bejne/m6uDYNWpq8vbYGQ.html
@rafmpm2 жыл бұрын
How to replace map bulbs?
@PrecisionLED2 жыл бұрын
These lights we do have listed as factory LEDs, which are typically soldered to a chip and board.
@jaygreen2-he6dl2 ай бұрын
my screw fell in between glove box 😢
@christophermurillo956 жыл бұрын
Will this kit work for a 2014 model?
@PrecisionLED6 жыл бұрын
Yes, that is correct, the kit linked in the description is indeed compatible with your 2014 model, as they are listed in the same generation.
@jamalwilliams57243 жыл бұрын
What about the dome light?
@PrecisionLED3 жыл бұрын
Check out 1:02 of the video for the dome light installation! If you were inquiring about the front dome lights, I believe those are factory LEDs, which are soldered to a chip and board.
@jamalwilliams57243 жыл бұрын
I mean the map light
@PrecisionLED3 жыл бұрын
@@jamalwilliams5724 These lights we do have listed as factory LEDs, which are typically soldered to a chip and board.
@GuyKevlar7 жыл бұрын
how a out the dome light for the q50
@PrecisionLED7 жыл бұрын
Thank you for your interest. The rear dome lights for the Q50 are the small lights just above the rear doors. It does indeed show this installation in the video.
@alpha.qrs4004 жыл бұрын
PrecisionLED what about the front dome lights? Can you change those?
@MrWroclawiak4 жыл бұрын
@@alpha.qrs400 I tried to do so Not easy and i stoped before brake it Did u get any solution how to do it I tried to find everywhere but no answer
@karenyoung53174 жыл бұрын
I was hoping to see how to change the two dome lights in the front 😕
@sergleflur_34404 жыл бұрын
That’s what I’m trying to figure out now lol
@PrecisionLED3 жыл бұрын
These lights are usually factory LED.
@trevorschauffler39632 жыл бұрын
What about lights next to your feet?
@PrecisionLED2 жыл бұрын
The footwell lights would be a factory LED, which you cannot replace as it is soldered to a chip and board.
@David-cb6bd3 жыл бұрын
Thanks for the video, made the process very easy. It was identical on my 2017 red sport. I didn't do the glove compartment though because I'm too lazy for that 😅.