Injector cleaning with Autool 150 machine

Рет қаралды 37,611

5 жыл бұрын

Just a quick update using the injector cleaning machine my buddy let me borrow. Looks like we got them cleaned up and flowing nice
INJECTOR CLEANER AMAZON LINK:
amzn.to/3dRDUgP
*This page contains affiliate links. If you purchase a product through them, I will receive a commission at no additional cost to you. These products are only ones I have used and would recommend personally. Thank you for supporting!

Пікірлер: 67

@MichaelChismToday 4 ай бұрын

Thank man, im cleaning my Lamborghini aventador injectors and that helped a ton :)

@drewfausett5388 5 жыл бұрын

Alll the fun of EFI. Hope this helps w the pacer pacing itself. Thanks for bringing us along!

@DickHamm 5 жыл бұрын

Hells yeah man! Almost got it going again letting the tank dry out 👍🤘

@dre83cpt 5 жыл бұрын

I definitely need to invest in one of those

@DickHamm 5 жыл бұрын

Haha heck yes! Use my link if you do 👀🤷‍♂️

@Silent_Shadow Жыл бұрын

I want this tool! I do a lot of fuel injector jobs and this would be one hell of a diag tool. Let's be honest not very flat rate friendly but COOL AS HELL!!

@ef2fodo 4 жыл бұрын

hello what will be you review on this machine I am thinking of buying one so I have been looking around for reviews on this machine thank you for your time.

@glennshotrodgarage5509 5 жыл бұрын

cool man did not think that equipment was so widely availble

@DickHamm 5 жыл бұрын

Yeah it’s really cool to have it available honestly! I got a lot of funk out of them!

@brentsmith5647 Жыл бұрын

Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@DickHamm 11 ай бұрын

You’re welcome!

@muiriey Жыл бұрын

They don't debur the common rail it's fully of swarf from the drillings. Took the end plugs out of mine and debured/cleaned out the whole rail and added a bosch filter inline. I ran it full wack for sometime before I put an injector anywhere near it. Done loads of tests and still going. It actually has a bosch pump!

@MrTutunka 7 ай бұрын

It looks like when they are all on, the far right rail loses a bit of pressure

@alloyspeed1889 4 жыл бұрын

I'm looking at one of these, thanks for the vid. Try mineral spirits. It's cheaper than sea foam and should clean ur injectors at the same time.

@alloyspeed1889 4 жыл бұрын

Plus it shouldn't foam

@DickHamm 4 жыл бұрын

Thanks! And no problem. Mineral spirits is exactly what I was thinking about and brain farted big time. Next time I’m doing that for sure! Yeah I saw the foam and was like uhhhhh 😮 😂

@hondagarageprojects4378 4 жыл бұрын

Use mineral spirits in the machine to flow test. You can get it at Walmart or Home Depot Amin the paint section. Also I use a purple power 50/50 mix to ultrasonic clean them

@DickHamm 4 жыл бұрын

Hell yeah! That’s rad I may try the 50:50 mix

@hangar4pro 3 жыл бұрын

@@DickHamm Purple Power has led to corrosion on certain alloys. Simple Green Extreme (aircraft) is the ticket...and I've tried them all. Good luck.

@DickHamm 3 жыл бұрын

Thanks! 👌

@johndee68 Жыл бұрын

Its now been 3 years. How has the machine held up ?

@rellim51 2 жыл бұрын

Will this machine work on low impedance 160lbs injectors?

@ozzi3146 2 жыл бұрын

Can this model handle with Diesel Injectors? Peugeot 1.6 HDI? Or is it only for Benzin?

@davidturner6543 5 жыл бұрын

Damn it now I’m on amazon looking to buy one lol

@DickHamm 5 жыл бұрын

Lol I put an amazon link in the description just for you!

@davidturner6543 5 жыл бұрын

Dick Hamm , I know you love me lol

@DickHamm 5 жыл бұрын

Hahah but of course! I was like uhh I should put that up good point 🤷‍♂️

@seaneldridge8206 5 жыл бұрын

So sick I think I might have to pick one up..

@DickHamm 4 жыл бұрын

It’s really nice I want one too lol

@oscaracosta3043 4 жыл бұрын

I was wondering if u have use the ultrasonic cleaner on the top of it if so what are your thoughts does it do the job pretty good?

@DickHamm 4 жыл бұрын

Yes I did! I think due to the response on the video I would like to make another as well going into more detail

@kevinkassie8573 4 жыл бұрын

Hi what type of adaptor to use to fit an 850cc injector that came out from the sr20 motor.I dont know how to fit them on my machine?

@artecar017 3 жыл бұрын

I think these machines doesn't have enough pump for high flow injectors!

@bhogstv6663 3 жыл бұрын

Enjoy watching here.. New friend.

@DickHamm 3 жыл бұрын

💪💪👊

@perjian1697 4 жыл бұрын

You're not supposed to use flammable cleaners, they can cause an explosion. They make cleaners specifically for these types of machines. Be careful.

@DickHamm 3 жыл бұрын

ah good info! thanks for that tip

@gilbertomontes3033 4 жыл бұрын

What fluid to use for cleaning injectors..?

@DickHamm 4 жыл бұрын

I’ve been using seafoam for the sonic, and mineral spirits in the tank 🤘

@gihanmello7222 4 жыл бұрын

Can you send me a link to buy the testing fluid please,,

@DickHamm 4 жыл бұрын

I am not sure what testing fluid is proper to use, I just used seafoam which foamed up pretty hard lol

@schmitty_luv 3 жыл бұрын

What’s the maximum size injector that the AutoTool Injector tool can handle?

@DickHamm 3 жыл бұрын

Good question! I’m not sure. I’ve done larger injectors one at a time without an issue. But it has a walbro 255 in it, for reference

@schmitty_luv 3 жыл бұрын

@@DickHamm I messaged AutoTool here on KZfaq video and they don’t have a particular “maximum injector size cc.” Now I’m assuming it’s more about I guess the cleaning and seeing how even they flow comparing the cylinders and paying attention to the spray pattern to make sure it has the same spray pattern to atomize the air and fuel equally. It’s kind of a mission to see such a tiny almost microscopic spray pattern or to know how dirty or not dirty the injector set is. I’m on the side of getting one of those tools as I plan to build/maintain projects that would benefit from that AutoTool injector cleaner kit. I had decapped side feed injectors and they ran fine for like a year and just over year or so I put a bad batch of fuel and I floored the car it made a weird reaction and I noticed it had worse compression on a piston cylinder soon after. That was about just over 10 years ago and I did not have e85 compatible fuel hose which might have deteriorated and left modified side feed injector stuck open etc., even though it was 90+octane it had 10% ethanol in it for over a year and I once ran AVgas and full e85 during that same time frame. Injector Cleaning becomes more and more important on modified vehicles especially since I learned on a built short block. It’s a way to protect your investment of time and money into your vehicle’s engine(s).

@schmitty_luv 3 жыл бұрын

My main concern now is that these are gimicky injector cleaning tools that might clean say a stock OEM style injector to like 42lb injector or like 500cc and under but would not flow say 2200cc Bosch or say Atomizer 5000cc 500lb style like it should with the correct pulse width/adequate wiring and/or frequency. I’m sure if AutoTool can’t answer that question and neither can 90% of the consumers then the machines themselves are “hit or miss” and they might work, but for how long and with what sort of efficiency/reliability? I noticed in a video online results had varied for the user on one of the tests........ one of the last things anyone would want is to be scratching their heads over their injectors right?

@DickHamm 3 жыл бұрын

@@schmitty_luv Yeah exactly the kind of thing I bought mine for! I figured I for the money I can at least go through and clean and check my stuff. Smaller ones you can def get an idea of flow but matching them and making sure they are clean was my main concern. I think any more than that you would want to get a bigger/different machine

@KuyaRap_24 5 жыл бұрын

it is possible to use it on a motorcycle injector?

@DickHamm 4 жыл бұрын

Yes! The shop I borrowed from is a motorcycle shop

@skeimi78 4 жыл бұрын

Does this work with fsi engine type injectors?

@DickHamm 4 жыл бұрын

I’m not sure on that answer, sorry about that

@shawychan9798 4 жыл бұрын

eBay CT150 professional seller can help you solve the problem（ www.ebay.com/itm/Autool-CT150-Ultrasonic-Fuel-System-Petrol-Injector-Cleaner-Tester-US-STOCK-/113924712483?nav=SEARCH）

@eazhar 4 жыл бұрын

Only sea foam used in this video?

@DickHamm 4 жыл бұрын

I think so yes!

@DickHamm 4 жыл бұрын

Mineral spirits to flow and seafoam to clean isn’t bad tho seemed to work pretty well for a cheap easy go

@notj5712 3 жыл бұрын

Knobs are on upside down.

@RichPrivilegedWhiteMale Жыл бұрын

My wife and I both have DI instead of Port injection. I want the ability to clean our injectors at home instead of paying someone else, and have seen this machine quite often in shops. Is this machine adequate and reliable? Any problems or hiccups with it? Thanks!

@user-bq4xh5fy5b 11 ай бұрын

The CT150 doesn't do DI injectors. The CT160 does. I found this out the hard/expensive way.

@RichPrivilegedWhiteMale 11 ай бұрын

@user-bq4xh5fy5b Thank you very much. How has this machine held up for you? It seems to be in every shop, and alot of the automotive youtubers have them.

@user-bq4xh5fy5b 11 ай бұрын

@@RichPrivilegedWhiteMale It seems well made. Build and holds pressure well. The ultra sonic looked a bit weak but did the job well. Definitely go for the 160 or dearer.