Inkjet vs Laser: The Ultimate Image Transfer Showdown!

No video

Inkjet vs Laser: The Ultimate Image Transfer Showdown!

Рет қаралды 972

5 ай бұрын

Inkjet or laser printer - which one reigns supreme when it comes to image transfers? In this ultimate showdown, we put both printing technologies to the test, demonstrating how to transfer images using an inkjet printer and a laser printer.
Traditionally, our RixCanDoIt Quick Transfer Paper is designed for use with laser printers, allowing you to easily transfer toner-based images. But in this video, we reveal a simple hack that lets you use the same transfer paper with an inkjet printer too!
Get ready to witness the inkjet vs laser printer battle as we walk you through the step-by-step process for each method. From preparing your images to applying the final transfer, you'll learn the tips and tricks to achieve stunning results with both printing technologies.
But that's not all! We'll also compare the outcomes, highlighting the unique advantages and characteristics of inkjet and laser printer image transfers. Will the vibrant colors of inkjet reign supreme, or will the crisp lines and detail of laser toner steal the show?
Whether you're a crafting enthusiast, a DIY decoration fan, or simply looking to breathe new life into ordinary surfaces, this video is your ultimate guide to mastering the art of image transfers. Get ready to unlock a world of creativity and versatility with your trusty inkjet and laser printers!
This paper is called Quick Transfer Paper and is available from:
rixcandoit.com...
(Note: For use with LASER PRINTING only.)
#quicktransferpaper #imagetransfers #phototransfers

Пікірлер: 8

@LanceMcGrew 4 ай бұрын

And what laser printer do you recommend?

@imagetransferswithrix 4 ай бұрын

I haven't owned more than one type so can't really make a recommendation. I use HP Color Jet printers.

@Woodchucksigns Ай бұрын

Rix did you say if is not completely dry, it could end up with spots? I did a few pictures on the 4” wood, let them dry and ended up with small pin hole size spots on most of the finished product. One I sprayed with coating spray (Kamari). I adjusted it to fit the wood.But spots and not a good picture on both. What ya think?

@imagetransferswithrix Ай бұрын

Do you see parts of your image left on the transfer paper that matches those dots you have on the wood? If so, then those spots were NOT glued down. Either missing glue, poor contact, or glue not dry in those areas. As I always say, IF ANY PART OF THE IMAGE HAS NOT TRANSFERRED AND YOU CAN SEE IT STILL ON THE PAPER WHEN PEELED OFF, then it was not glued down. Because you will NOT be able to peel up the image if glued on the wood. Impossible.

@mister_manager Ай бұрын

Is it possible to use ModPodge instead of the spray starch, or are there any alternatives?

@imagetransferswithrix Ай бұрын

The starch is to allow you to print using an Inkjet printer. ModPodge won't work. You can use it to glue with, as I often do, but not to use for inkjet printing.

@edmelzark1069 5 ай бұрын

No Spray on the Laser Correcct??

@imagetransferswithrix 5 ай бұрын

The paper is designed to take Laser Printing as-is. No prep of the paper required. You do have the option to spray AFTER you print if you think you might use too much glue and want to not chance possible smearing or wrinkling. But normal application, just print, glue, dry, moisten and peel when using Laser.