Insane Power Form 40W Laser Module | Upgrading Longer B1 with 40W Module Plus Extensive Testing

Рет қаралды 4,942

9 ай бұрын

Insane Power Form 40W Laser Module | Upgrading Longer B1 with 40W Module Plus Extensive Testing
In this video I will be upgrading my Longer B1 Laser with a 40W module. I will also do some extensive testing to see its true capabilities.
Testing Longer B1 - • Affordable 30W Laser |...
Shopping for Longer B1:
- Longer B1 40W - gozbx.com/r/kyEZY5TRuebp
Discount code（-100）：B1ZBXS100
You can find Longer's monthly promotional events on this page, where there are often significant discounts available：gozbx.com/r/48TB2J6ug0AG
Supported by Zbanx place for creators and advertisers - www.zbanx.com/
Disclaimer
Longer is the sponsor of this video and have provided the machine for testing, review and future project videos. I was not asked to say nice things about this product. The tests and thoughts on this machine are my own.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#longerb1 #lasercutting #laserengraving
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Пікірлер: 37

@CasualDIY 9 ай бұрын

Shopping for Longer B1: - Longer B1 40W - gozbx.com/r/kyEZY5TRuebp Discount code（-100）：B1ZBXS100 You can find Longer's monthly promotional events on this page, where there are often significant discounts available：gozbx.com/r/48TB2J6ug0AG

@barry.w.christie 9 ай бұрын

One of the best things about your videos, apart from the information provided in a clear and unbiased manner, is your outright enthusiasm for what you are doing ... absolutely brilliant 👍 Maybe one of these days I'll save up enough to buy one of these machines, but I'd need to start a business I think to make it worthwhile, otherwise it'd just be an expensive toy.

@CasualDIY 9 ай бұрын

Thank you. Yes if you can make some money on it makes more sense. Instead of investing into a branding iron for example you can use the laser for. Cutting out Christmas ornaments, personalising items for sale etc. There is few possibilities 👍

@MCsCreations 9 ай бұрын

Wow... What a crazy machine, Tomasz! It works amazingly!!! 😮 Congrats!!! And thanks for the updated review! 😃 Stay safe there with your family! 🖖😊

@CasualDIY 9 ай бұрын

I was surprised at its capabilities, I wonder how it will compare to my new CO2 Laser that's still I the box.

@johnpenman1548 9 ай бұрын

Hi Tomasz, An excellent video, and what a fantastic machine! I might be tempted to buy one after all! 😄

@CasualDIY 9 ай бұрын

Solid machine for reasonable price 👍

@ralphpitcher8849 7 ай бұрын

How does this compare to the Falcon 2 40w? Great video! Thank you!

@CasualDIY 7 ай бұрын

Not sure, not had the opportunity to test the 40W Falcon

@GrawerowePrezenty 7 ай бұрын

Witam Jak wysoko od materiału znajduje się laser podczas cięcia? w moim atomstacku jest problem przy krzywej sklejce, łapie ją i rusza cały projekt :/

@CasualDIY 7 ай бұрын

Nigdy nie mierzyłem. No niestety ale material musi byc płaski.

@BillEngrave 2 ай бұрын

I have the same laser when engraving an image I change my speeds, but the laser does not seem to move faster or slower. Can you give me advice on what to do. It’s only like that with an image.

@CasualDIY 2 ай бұрын

Try it 500mm/min and then 10000mm/min. You should see a difference. Most likely the speed will be affected more by dpi.

@MrMarcinskij 9 ай бұрын

Pozdro z Polski ziom :)

@CasualDIY 9 ай бұрын

Pozdro

@hhvhhvh6724 3 ай бұрын

Hey, great video. I just got the same laser but I seem to have a lot of issues with it. Any chance I could contact you somewhere for a helpful tip? Love your videos

@CasualDIY 3 ай бұрын

Sure just drop me an email casualdiyuk@gmail.com

@hhvhhvh6724 3 ай бұрын

@@CasualDIY Thank you, I sent you one.

@malcolmmarks7374 9 ай бұрын

Great bit of kit. Not sure if to pull the trigger but seeing that the UK is outside the EU I fear we could incur a 20% vat hike which kills the deal for me so It’s a no no.

@CasualDIY 9 ай бұрын

Yes that could be a problem unfortunately. You can drop them an email to check how they operate and if that is the case, maybe they have a warehouse in the UK. Longer is a biggish company

@JakubSK 6 күн бұрын

Got mine 40W for $900 with the honeycomb mat!

@malcolmmarks7374 9 ай бұрын

I see many KZfaqrs doing laser, cnc’s etc and lightburn seems to be a main software but we never see anyone designing anything on it and showing how to get the image to the laser to cut/engrave it. May make a good video. Like the speed and feed charts you keep cutting out.

@CasualDIY 9 ай бұрын

I could do a video on that no problem 😊 I'll add it to my list of videos 👍 I don't tend to make my designs in lightburn - I just add final touches in it like text. For 3d projects I tend to use sketchup/ Inkscape for vector projects. I'm more comfortable with those. Lightburn does give you a lot of options but still I find it limiting in some areas.

@mihgio3235 9 ай бұрын

i think it's better to upgrade the entire machine, the difference in price it's marginal. and myself i "bought" the 30w version but the fellows from banggod didn't shipped to me, even this day my order it's still in process (two weeks already in procesing)... very bad services from their part

@CasualDIY 9 ай бұрын

True. Less messing around.

@Graeme758 5 ай бұрын

@@CasualDIY And cheaper if you sell the 30w.

@lucasalati369 9 ай бұрын

By any chance you can cut a 12mm birch plywood? They all fail on that wood....

@CasualDIY 9 ай бұрын

Hmm not sure birch ply is very dense. I don't even have a pice to test it out. I think I have a normal ply 12mm I could try if you want? If you do just drop me an email and I'll tell you the results. Otherwise I will forget 🤣

@lucasalati369 9 ай бұрын

I need to use the birch one for strength and design restrictions unfortunately but thanks for the answer@@CasualDIY

@Graeme758 5 ай бұрын

With the cost of the module you are better off selling the existing B1 and buying a new 40w model. B1 30w is £700 new, B1 40w is £950. 40w module on its own is £785. Sell the 30w for about £500, add £450 and you have a B1 40w and have saved over £300. Buying the upgrade makes no sense.

@johnnyboy125 9 ай бұрын

Too expensive in todays times

@MrMarcinskij 9 ай бұрын

Expensive? 36watt ikier k1 is the same price almost... For 48w laser this is very good price.

@paperbeen 5 ай бұрын

Looking at their web site that have only lasers with square frames. Too small for any meaningful work. Spending additional money to have longer rails (And throwing away the short one?) make no sense because it is raising the price to acquire one unnecessarily ($150). This is like punishing consumer for doing business with them, They should wake up and stay up.