Interesting. I never before saw the bearing dissembled. Thank you for sharing.
@BarboursAutoHelp3 жыл бұрын
You are welcome!
@marcusbunting64723 жыл бұрын
Pretty sure this is my issue, get a twisting spring sound when turning left or right, Jack car up it makes no nose only does it under load, only started when I change worms shock and spring
@ahkau46127 ай бұрын
Super excellent video. I was wondering about how a strutt mount bearing works.
@shuvadey42942 жыл бұрын
Great video showing the mechanism. Thanks a lot. Very educational, slowly building up my mechanical knowledge of cars up!
@wkwmobile3 жыл бұрын
Installed a pair of KYB's Strut-Plus ready struts on my 2012 Toyota Prius, 2nd pair by the way. These struts are making creak and squeak noises when steering at low speeds. This is the case with both sets received and stalled. Have you heard of bad mounts on new struts? It is my understanding that although KYB is the OEM for Toyota, Toyota does not use their mounts, I think I see why.
@BarboursAutoHelp3 жыл бұрын
It's very possible to have bad mounts on new struts. But, it's pretty rare that your get two sets with the same problem.. You may need to be looking elsewhere for the source of your noise.
@ua7pyro591 Жыл бұрын
Great video
@Mark-jd1jx3 жыл бұрын
Could a strut mount also cause noise while driving? My sienna has a bad strut mount already know that, but while driving over 30+ mph it creates a noise all the time. I've narrowed it down to the strut, the strut looks to be fine.
@MrDcseltzer2 жыл бұрын
I installed brand new KYB Strut Plus units on my car and found that they now have a springy Clunk noise at the first instance of steering now. It only happens for the first few minutes when I drive. I have worked countless hours on this. Replaced Sway Bar's, Re-Torqued under load and followed all of KYB's support tech info plus trying to spray white Lithium grease into the bearing assembly from the side (Yes, they told me to do that too, and still have that springy clunk when I first steer the car left to right. 2009 Honda CRV and the issue was never present with the OEM strut assembly. Can anyone give me some advice here? I feel like KYB should be sued due to all the time I have spent on this plus 2 Wheel Alignments after the post work done.......beyond frustrated.
@youtoobe16910 ай бұрын
Thanks for the video, good info!
@BarboursAutoHelp10 ай бұрын
Glad it was helpful!
@automotiveaddiction4283 жыл бұрын
Can this be rebuilt..if ball-bearing not lost ?like pack it full of grease again ?
@BarboursAutoHelp3 жыл бұрын
Never done that. Usually they are replaced.
@utuber29403 жыл бұрын
I bought a set of quick struts but they are tight at the top and don't turn easy like you show..i have not installed them yet.is that normal..
@raffaelle4623 жыл бұрын
big help thanks for the video
@khuramnasar5493 жыл бұрын
Wow! Thanks!
@anneturner24043 жыл бұрын
I have a bad strut mount bearing on my Cadillac 2006 DTS , does this mean I will also need a new or used strut ?? Just had 2 struts from a salvage place about a yr ago ??????? Ty
@BarboursAutoHelp3 жыл бұрын
I don't know. You'll need to find out if they are bad I guess.
@jabadathehut6400 Жыл бұрын
I have a video on my page if anyone wants to check out. It’s my F-150, making a squeal or squeaking noise only when turning under load. I’ve been told it’s the strut mount. There is no knocking whatsoever