good luck. i haven't been able to find a pump that lasts longer than a couple years anymore. tired of replacing these things.

Modern day quality control is lacking big time! 1990 pumps would last 18-25 years, 2015+ pumps you'll get 6-13 years

Christianity is pagan.✔️ Statues in the church indicate that Christianity is pagan . Jesus is just a human being and messenger . Human being like me and you . Jesus did not know the unseen, Jesus did not know the Hour, Jesus could not do anything on his own,👈 Jesus was sent by God, Jesus was praying to God Jesus is not God or the son of God Jesus is a man, mortal . If No mary , no Jesus . The incarnation is a pagan and polytheistic idea Islam is the true religion, Islam is the religion of monotheism ❤️ Christianity is a pagan religion. I invite you to Islam, and to pray to the One, True, Living God.

@Sam A nah I'm good.

@@SamA-xu9gy I'm not sure why this is here but it must be answered. This is a long reply but the truth must be based on substantiated facts. A lie or half-truth, well, that's another story. If you get to the end, maybe, you will find an eternal reward. Most of what is stated is taken directly from the Bible: KJV, CEV or BBE. > Christianity is NOT pagan. > Statues/icons in churches are an evidence that that church is not following the teaching of scripture on THAT POINT. > Seeing then that we have a great high priest, that is passed into the heavens, Jesus the Son of God, let us hold fast our profession. For we have not an high priest which cannot be touched with the feeling of our infirmities; but was in all points tempted like as we are, yet without sin. Let us therefore come boldly unto the throne of grace, that we may obtain mercy, and find grace to help in time of need. > Jesus, the Christ was truly God. But he did not try to remain equal with God. Instead he gave up everything and became a SLAVE, when he became like one of us. Christ was humble. He obeyed His FATHER and even died on a cross. Then the FATHER gave Christ the highest place and honored his name above all others. So at the name of Jesus everyone will bow down, those in heaven, on earth, and under the earth. And to the glory of God the Father everyone will openly agree, "Jesus Christ is Lord!"? > Children who are under age are no better off than SLAVES, even though everything their FATHER owns will someday be theirs. This is because children are placed in the care of guardians and teachers until the time their FATHER has set. When the time was right, God the Father sent his Son, and a woman, conceived and gave birth to him, via the Holy Spirit. His Son obeyed the Law, so he could set us free from the Law, and we could become God's children. > God is a TRINITY, three persons; Father/God, Son/Jesus and the Holy Spirit. These three comprising an individual. The Individual that is you is also a TRINITY composed of a: SOUL; giving you self awareness, BODY; environmental awareness, SPIRIT; God awareness. > Religion that pleases God the Father must be pure and spotless. You must help needy orphans and widows and not let this world make you evil. God loved the people of this world so much that he gave his only Son, so that everyone who has faith in him will have eternal life and never really die. God did not send his Son into the world to condemn its people. He sent him to save them! No one who has faith in God's Son will be condemned. But everyone who doesn't have faith in him has already been condemned for not having faith in God's only Son. The light has come into the world, and people who do evil things are judged guilty because they love the dark more than the light. People who do evil hate the light and won't come to the light, because it clearly shows what they have done. But everyone who lives by the truth will come to the light, because they want others to know that God is really the one doing what they do. God's Son comes from heaven and is above all others. Everyone who comes from the earth belongs to the earth and speaks about earthly things. The one who comes from heaven is above all others. He speaks about what He has seen and heard, and yet no one believes Him. But everyone who does believe Him has shown that God is truthful. The Son was sent to speak God's message, and He has been given the full power of God's Spirit. The Father loves the Son and has given Him everything. He who has faith in the Son has eternal life; but he who has not faith in the Son will not see life; God's wrath is resting on him.

Did that motor run on 120v or 240v?

Respect 🙏 🙌 ❤️

the cost to replace all of the components of my goulds 5gs15412 cost $445. a new wet end at the time would have cost almost double that. yes it is worth rebuilding

@@Sicasevilisnow add over 200$ per hour for me to rebuild it at least 4 hr shop time to rebuild and test it your only talking price of mineral and your almost at the same price with no factory warranty most companies aren't going to pinch pennies and want to spend there time when your talking less than 100$ difference in less you do it all yourself and know how to because mistakes aren't cheap then it's all on you that my opinion. then your installing it how knows how far down the labor for install price how going to cover all that👍👌✌️💦💯🍻⚒️💪🇺🇸

joseph, really? thats alot of complicated talk. i did it myself. i know that goulds does not provide a warranty for homeowners. but honestly the water works companies were going to charge $5k to remove the pump, then the new pump cost and another $6k to install plus cost of any drop pipe sections needing replaced as well as milspec tape and ptfe tape and joint ptfe as well. at the time i had zero options as we had spent our entire savings to by the property and cabin. it was either repair myself or wait a couple years to to get the cash together. thanks for the talk

@@Sicasevilis your just talking about replacing the pump. I was talking about a actual tear down and rebuild of the pump end and install. The actual rebuild of the pump end on a sub is not worth the time and coast I can understand the rest it does save money and worth the time have a great one till the next one 👍👌✌️💯💦

Many of those Chinese pumps have brushes, regardless of the seller's claims. There are videos here on KZfaq showing that. Spend the money and buy American! I say that as a Canadian neighbour.

this has occurred with a pump 200 ft down on a 400 ft well. i retrieved itwith a 1 inch shark bite coupler that cost $12

@@Sicasevilis can you give some more details on how and exactly what you used?

yes Orbit 35679 1" PVC-Lock Flex Repair, 1-Inch, White is the exact part i used. h just connect it to yourdrop pipe and lower it down. i did use a cheap swann night vision camera(removed from mounting stand) with 200ft cord inside the pipe repair coupling. i could see the broken pipe and was able to place the repair coulling over it and pushed down to connect! amazingly only took a few tries to get it connected. the camara set was swan from sam's club 69 bucks and the cable from best buy was 25 bucks. my well is 420 feet and 200 feet is very heavy still with a pump at the bottom. if youhave any more questions let me know

@@Sicasevilis that's great to know thanks so much for the reply and the details

Seems like a good reason to install an external check valve when installing the pump the first time.

I've been using 3M 33 electrical tape for decades, it works just as well as shrink wrap.

No, I won't pull threw the pump. Impeller stack in the pump is too tight

Is this a 4" well or 6". Either way, your hanging on something. Get the that sweet spot where it hangs, go up & down & keep feeling that bump, then rotate the pipe,walking circles around the well, one direction and then the other. It's a pain, but you should be able to get it by whatever it is hanging on. Typically the pumps wire guard is hanging the bottom lip of the pvc casing. If its 4" casing & a 4" pump, it's a real pain in the rear end

Never heard of them. If the motor on them is made by Franklin electric

Ps cant edit but much of my work is warranty assesments

He said that these motors are not worth the time to rebuild. I am a disabled guy with nothing but time on my hands, I have just put a used pump down, and was wondering if it can be rebuilt? When the only commodity a man possesses is time, he is often willing to spend an inordinate amount of it to accomplish a goal. I worked in a highly technical field before I was injured, and have built hot rod engines before, so I am not the average layman. How would one begin to find the process to rebuild one of these pumps successfully?

@@johnhurtme hi, motors are not really worth repairing unless you can rewind them yourself, if you bolt your motor adaptor on to a good motor it will set the pump shaft at the correct height then as you assemble bowls and impellers you want aprox 10 thou clearance between the underside of the impeller and the bowl, this is usually achieved using shims, the rest is pretty straight forward. If you need any more info don't hesitate to ask cheers

It doesn't matter, both are + legs. You can't mix it up.

Not true, they're not terribly smart enough

@@Boycott_Wendys actually they are, Ukrainians are some of the best engineers at designing rocket motors, and many other things, NASA even buy Ukrainian rocket motors. I lived 6 years in Ukraine before the war, and there was a master that could repair about anything. I had something break, and my wife took it to the master and it was repaired in 3 days good as new.p, and in the USA it would have been thrown in the trash. Don’t be stupid and sell Ukrainians short, remember the worlds largest aircraft the An-225 was designed and built by Ukrainians.

@@raymondheckard234 those ones were Russians

@@Boycott_Wendys no European versions of the pumps sold in the USA. Same exact brands that Hensley uses just they are wired for European current

@@raymondheckard234 Are you trolling Mr Putin?

Love your videos! I lol when you pulled out the Bruiser water end. Have not seen one in a long time.