Even though you have told us 1000 times what something is, there are always someone new viewing and learning. 👍

Loved how you said you didnt want this video being an hour long and yet it goes on for an hr n a half haha

Me and my grandson really enjoyed this video. He really like it when u went old school scrapper to get that one part off. We love the videos we have learned alot from u. Thanks have a blessed day.

Definitely get the other one!

Under that last board you left in there is where they put the gold bars to help counter weight the machine ;)

You always know it's gonna be a good video when he says he doesn't want it to be a long video in the start and it ends up being over an hour ahaha

Watching you rip and tear the drawers out made me laugh. All roller style shelves or drawers have a little plastic release lever on the rail toward the bottom left and right of the drawer. But kicking them works too 😆

I'm sure glad that you are breaking this down and not me!! Good job mate!!!

So much enthusiasm exhibited in this vid...loved it! Good on you mate!

WOW - THAT WAS A FASCINATING SCRAP - WELL DONE - MORE MONEY IN YOUR POCKET !!!!

Here we go again I Ben waiting lol!

New video! Awesome video by the way!

i would keep the monitor arm and mount for use in conjunction with a microscope. or use it for testing old pc's or consoles that you may get

This was a great video. I couldn't stop laughing when you kicked that slide out with the mother board and it just fell out. Good one Ben, thanks!

Enjoy your youtube channel. Keep it up ben. Love scrapping myself cheers AAAAA++++++

This video made me look at the businesses around me in a whole different way. Wow!! Yeah, it took a little while, but he pulled out the equivalent of 10+ computers.

Thank You Sir, Like all your videos. Your videos are a break from the nwo world. I am simple minded so you can never tell me anything to many times. Thank you again Sir.

lol Ben wath out for your neighbour as they see you dragging two more of that machines into your yard they can take you for Frankenstein lol

Bingo, says Ben!😆 What a scrap session, I could see your toes curl up Ben, and with your shoes on, when you discovered that one board. LOL I really enjoyed this video 👍👍💪💪 Thanks

150% fantastic vid Ben!! ;) Pls post the scrapping video of that giant tv. Good luck with the second ultrasound machine!! Stay safe bro!

Always a special and never seen scrapout whats next ben a ct scanner haha thanks for the fun

Hello Ben, Sweden here again. Good thing you mentioned coffee, stripping wire in the garage and took a thermos with me... I also have helicopters around me from time to time but they are mascerading as Coast Guard 🤣 Stay safe and take care.

Absolutely get the other one Great video!!

That's freaking awesome. My scouts are looking to get a donation of alot of equipment like this. This is going to be awesome on the recycling. Thanks for the post.

Hi Ben good morning another great video take care your health and keep scrapping regard 👍👍👍👍🇸🇬

Great Video Ben Nice Score On The Ultra Sound Machine Keep Bringing The Videos Dude👍👍

WOW!!! Coincidentally, they've lately retired 4 of these machines at the hospital where I work. They're just taking up space and not sure what they'll do with them. Those things are well built and super heavy. I work with a cardiac ultra sound tech and often have to push her machine to set it up. No board sort or anywhere to sell boards here in Canada that I know of. I usually just take them apart for the copper and aluminium. Just hoarding the rest for now: cpus, ram sticks, and all the little nuggets on the boards.

Moral of the show is never give 100K UT machine to a srcapper! Ha

I'm glad you explain things. I'm neither a computer person nor a scraper e-waste or otherwise. I'm just a mom who is also a librarian who loves knowledge and has a son who is into IT and computers. He will go to computer engineering university in two years. So I appreciate learning this. I now can talk to my son about his passion. He asked for an old server and parts for his 16th birthday so he can rebuild it. He's been taking apart other computers as well. Anyway thanks for what you're doing for not just scrapers but future ones

I hope you were able to get the second machine!

That big lever is just to push the back plane evenly on to the daughter boards. Awesome video dude

GO GET THE OTHER. SNAP IT UP!!! 👍👍👍👍

Love your stuff I try to keep up with your scraping endeavors as quickly as you produce them. Thank you for all the effort you do. This one was worth every second.

1:12:08. What you're looking at is a load of relays. Each of them have copper spools in them along with silver plated contacts.

Plz tell your friend to drop it off my place if you don't have room :). He can load my backyard whit these anytime :).This thing is awesome. I was amaze whit the Cisco server racks last video, but this beat it X 10.Ty for sharing this Ben. Have a great one and stay safe mate.

This was fun! Love seeing weird machines

Big hammer Ben and if that don't work get a bigger hammer , Ben and if that doesn't work get just one stick of dinomite. Ha ,ha. Best wishes Ben

"Alright, alright, alright" 0:50 AM in Germany and the beer is out, but no meanwhile with a new video from Australias best Scrapper ya. 😎😎😎 Thanks Ben and greets from Berlin 😉👍

amazing video. loved every second.

Really enjoyed the video. Thank you.

I'd say get the other one but I'm biased to scrapping new and unusual things cause it's just so much fun. However you can justify it with those great boards for gold recovery. Plus, now that you have an idea of how to get in it and don't need to record, the scrap should go faster.

Super interesting video! Love seeing unusual stuff getting scrapped. Looking forward to that giant tv.

Nice scrap out vid mate. Keep them coming.

Great video !

It's the machine that just keeps giving! Well done and I hope you got the other one. Take care, Poo

Ben.. You know your short on time.. But your dying to go get it.. Don't miss that change you have... Best of luck...

Hello Ben! From the USA, I've been a subscriber to the channel 👍 for better than a year. It's always nice to tune in when you're breaking down good quality 👌 electronics as you share your excitement and knowledge. Continued success and happy scrapping.

"That's the professional way to scrap!". LOL

invest in a trailer for those oddly picks

Good day mate!! Excellent effing video mate..!!!

love it, like a kid in a sweet shop

Loved the video one of the best

obscure three for free reference, he's always on the hunt

That was quite an adventure full of surprises. Thanks it's always interesting.

Go for it Ben!

I stripped an older philips ultrasound (crt monitor) from Seaside vets here in Wallaroo. It weighed 200kg according to the operator's book. Stripped bare, there was 74kg of aluminium chassis/panelling, about 20- 25 large pcb's, 2 large transformers. I still have the heavy duty dual wheel castors with suspension. Not a massive amount of wires. Good money for the ally.

You should get a small dosimeter or a geiger counter for when you get some strange or medical equipment for scrap.

As much as an ultrasound costs the machine should be made in pure gold!

Awesome !!

It's funny how you tackle problems. You're holding a cable with a connector that pulls apart clearly in-between. So Instead of pulling the cable apart, your tool of choice is...Wait for it... A wire cutter! 17:35

Nice video!

Hell man a nice scrap. Keep them coming please n like your video's.

What an amazing score Ben! I sure hope you got the other one as well!

May be make a work bench on wheels out of this? Good video,Stay safe and healthy.

Absolutely get the other one

Go for it lots of good metal and boards. I would take a dozen.

Hey Ben this was an awesome video, love these surprise videos long videos lol are great keep em going

That’s awesome great video.. I just got my first two pick ups and one of them being 5 pcs I was excited about that till I saw this 😂😂😂..as always thanks Ben

Absolutely brilliant video Ben i really enjoyed this one. Don't apologise for how long they are, the longer the better. If they are too long to watch in one go then it's easy to watch in stages

you should have a small bucket near where you take apart things, just to put all the screws in. they add up in weight pretty fast.

Best scrap ever dude.....

Just a beautiful machine.

The angle of the camera is fine thanks. It makes it more interesting viewing, angles, or positions that you have to be in to remove screws or panels. It like I am right there.

Great video , thx

Go for it!

That was Ultra good

What a butcher, That unit had enormous value for recycled parts, but, you destroyed all the value there was. For your $ 50.00 of scrap, probably was worth $2000.00 U.S. Parted out online. These machines are purchased regularly for use in third world countries.

Nice job

Bloody hell squire, there is enough computing power in that little baby detector to send us to MARS!

Ben great job get that Gold, nice boards can you get the other 2 ultrasound machines ? You are one of the best scrappers I have been watching for a few many years now. You are the man down under. Keep up the great work and have fun doing it

at 9:10 Don't want to make this a 1 hour video? No, it's a 1:37:30 video!

Great vid ben and even the magnetic MLCCs are worth taking they have PD and AG but smaller amounts but still worth taking

Cool to see what is inside! I don’t even scrap and watch your vids. Often to chill out at the end of the day or have them on in the background. I often wake up and they are still playing lol Hopefully that helps with the ad revenue 👍 Keep it up. Cheers from the U.S.

The black things all over your board you were breaking up isn't a transformer it is a relay. Has almost pure silver contacts

nice to watch your channel

Ben I'm clear in Salt Lake City, Utah living/working mate and should you not want to pick this other ultrasound machine up to scrap man, then I'll fly over and grab it 😜

34:16 In my opinion, I'd get the second one too. Alone already for the wholeboards! But anyway good Video!

Wow now I need to find me a ultrasound machine to scrap

Do you have a video of what all comes out of computer towers that have gold in them? Thank you really like your videos

love it

I like the videos when you are talking stuff apart and with the hole of it on video

Hello Ben, Sweden here again. My yard allows for 10% ferrous material by weight on aluminium. We also have 2 grades on copper, bare bright #1 and copper #2 all the rest.

43:08 Lol.

The people have spoken Ben, get the other one too. Majority rule.

those blocks on the back they are tiny relays so they will have some copper spools tiny one and at least silver contacts or may be even gold tho so far i found gold contact only in blue colored ones might be accidental but ...

You're ripping that apart like a kid at Christmas time

Master ben realy very good and very suprised a scrap last scrap maybe you DIY tools table :))

Very enjoyable watch, Ben, thanks for sharing! Boggles the mind how much design, engineering and over-speccing goes into these machines; probably justifies the price. Now imagine printed out versions of the design documents and schematics down to each electrical component: could probably fill a warehouse!

Did you get the second one?

Awesome really really enjoyed this scrap out, what a score!! Well done ben 👍 loved some of those server grade boards, real nice 👍