Install a VHF/UHF Mobile Ham Or

Рет қаралды 30,109

Күн бұрын

It's pretty easy to install VHF/UHF radios into most trucks, the Ford F-150 Lightning is no exception.
Links from video:
Power distribution panel: amzn.to/3mBUnvU
Wera Tool Kit: amzn.to/3yp1ZVh
As an Amazon Associate I earn from qualifying purchases.
Lido Mount: www.lidoradio.com/collections...
Bulletproof Diesel Antenna Mount: www.dieselpowerproducts.com/p...
📻Want the best HT antenna? Signal Stuff Signal Stick signalstuff.com/?ref=622 (This is an affliate link)
📻You can find some of my favorite radios at GigaParts: The DigiRig can be found here: www.gigaparts.com/nsearch/?lp...
📻Good Value HTs: HTs: www.buytwowayradios.com/blog/...
📻Check out Radioddity ham radio radios and get a discount: Xiegu G90: radioddity.refr.cc/hoshnasi
📻 Support Ham Radio Crash Course Content 📻
Patreon - / hoshnasi (includes monthly newsletter, stickers and Patron perks)
📸KZfaq - / hamradiocrashcourse (includes early access to videos, membership YT badge and custom emojis)
Shop HamTactical: www.hamtactical.com
Shop Our Affiliates: hamradiocrashcourse.com/affili...
Shop Our Amazon Store: www.amazon.com/shop/hamradioc...
As an Amazon Associate I earn from qualifying purchases.
★ FOLLOW ME HERE ★
🪩 Website………………………► hamradiocrashcourse.com
📸 KZfaq..................► / hamradiocrashcourse
💻 Twitch......................► / hamradiocrashcourse
Podcast………………………► hamradiocrashcourse.podbean.com/
💻 Discord………………….► / discord
📸 Facebook................► goo.gl/cv5rEQ
📸 Twitter.....................► / hoshnasi
📸 Instagram................► / hamradiocrashcourse
📨 Physical Mail...........►Josh Nass P.O Box 5101 Cerritos, CA 90703-5101
Music by Sonic D:
Soundcloud.com/sncd
Twitter.com/sncd
Facebook.com/djsonicd
#HRCC #hamradio #amateurradio
00:00 - Intro
00:47 - Bullet Proof Diesel Antenna Mount Bracket Install
10:18 - Running the power
15:50 - Power Distrobution Panel
19:22 - Antenna testing
19:56 - Power on testing

Пікірлер: 199

@HamRadioCrashCourse Жыл бұрын

It might not have shown well on camera, but the antenna mount has a gasket between it and the truck body. 👍 Here are my thoughts on EVs! kzfaq.info/get/bejne/fM94psuqxNTTmnU.html

@FireDoug2001 Жыл бұрын

Nicely done Josh! You're a better man than me, I drilled a hole in my F-150 Platinum. When I saw the price for the brake light mount, I lost my marbles and went straight for the step drill bit and put a hole in the truck body. But that is a super clean mount. 73 de KO6TX

@chublez Жыл бұрын

Better ground plane that way anyway. Just drill the hole. Everyone so gun shy about in. They make nmo plugs if you ever go to sell it, alternatively advertise it as having the coax there already to other drill shy hams lol. Might get more money for it.

@bb_37 Жыл бұрын

@@chublez And, after five years or so, the truck will have depreciated enough to make whatever cost reduction due to the mount a non-issue.

@arnoldschmidt2753 Жыл бұрын

Well you got it done. I hope that you don't have any issues with the install. But you know what is involved with this project and you saved a lot of money doing it yourself.

@jasonportman4591 Жыл бұрын

Fantastic install video for the new F150, hands down the best I've seen! Been wanting to do this for some time and wasn't sure about that mount but it looks really solid and well built. Thanks!

@michaelcarey Жыл бұрын

I sure hope the LED drivers in the light assembly are RF quiet! Tune into a weak S1-S2 repeater and activate each light in turn... see if receive is affected when the LEDs are active. Modern vehicles are full of RF noise generators, EVs are a whole new ball game!

@benjaminpugh53 Жыл бұрын

Thanks for the inspiration Josh! I've had a radio in my truck for a year or so now, but I'm doing more electrical and needed to clean up my connections. Now I have some good ideas. 👍

@ginielfinancial Жыл бұрын

Josh, thank you for the video. I love that mount! I will now look at one for my Lightning. Great job.

@longeze Жыл бұрын

I just got my Lightning a month ago, and just my Technician License a week ago. So funny, I was looking at the same mounts and had the same realization. Wow.. is that expensive. Thanks for the great knowledge.... especially for a new guy.

@B.Murphy Жыл бұрын

Think my favorite videos are mobile installs. Nice install!

@HamRadioCrashCourse Жыл бұрын

Awesome! Thank you!

@theblindsharpshooter 2 күн бұрын

I like that power distribution box. I had previously powered my radio straight off the battery on my previous vehicle. Now with a newer nicer truck, I want to power my radio and route the wires much cleaner. The only issue I'm having is deciding where to mount the radio with a clean look...

@RookieLock Жыл бұрын

Love your new rig Josh. Looking forward to seeing more !

@NathanMazanec Жыл бұрын

I appreciate the walkthrough on how you did it, and also the closer look into your beautiful truck! It is amazing how quickly kids can scuff up/ dirty the inside of a new vehicle! Glad you like it, I am sure it will serve you well in many aspects! De K1MAZ

@wassman27 Жыл бұрын

Helped out a few hams clean up their mobile install and a common issue I came across is routing wires or Coax over airbags. You have to run them behind the airbag so they don't interfere if they deploy. Also, I integrated a simple relay circuit to cut power to the radio when the key is off. Just need to find a wire that has 12v only when the key is on.

@jeffjohansen4945 6 ай бұрын

Great video- thank you for filming this installation

@KevinW8BRY Жыл бұрын

The icom speaker sp-35 is great for that radio and it’s pretty small but loud! Install looks great Josh!

@N4XTL Жыл бұрын

Nice install! That "frunk" area in the Lightning is so cool, tons of room behind the plastic to hide stuff, and the 12V battery is just right there. Regarding the low audio from the speaker when it is under the seat, I have a similar issue and might upgrade my FTM-200 to the FTM-500 when it is available. It has a front facing speaker right on the head unit!

@M9A1MAN Жыл бұрын

Great video man. I really enjoyed it. I just ordered the same antenna mount for my 2021 Ranger, so it was awesome finding this video and seeing you do an SWR test. I'm surprised you didn't go with an APRS capable radio.

@kingdick4508 Жыл бұрын

This really is a great video, in somewhat uncharted waters. A lot of us know how to do mobile installs, bonding, etc. - but I don’t think I’ve ever seen one where a mobile install was done on an electric vehicle. I guess you’re the trendsetter now Josh!

@ch716 Жыл бұрын

That truck and antenna mount is awesome. I’m looking forward to the HF install.

@ohioflyer_12 6 ай бұрын

@HamRadioCrashCourse If the audio output doesn't satisfy your needs, you can hook up a standard 3.5mm aux cord. That is what I did for my IC-2730A. I hooked it up to the 2nd speaker jack and now I have great surround audio. Not to mention I don't have to buy a $50 speaker. But of course, that only works with a radio that has an aux port.

@tlipker Жыл бұрын

Bought the dual antenna mount for my Colorado truck. It installed just as easy as you did Josh. One antenna for UHF/VHF. The other antenna for GMRS. I got two antennas from Compactenna. They seem to get good reception for both radios. The other day on 70cm, I was able to transmit 40 miles to a repeater to make a contact. The SWR for each antenna is not bad but not great.

@PDPIE1029 8 ай бұрын

I love that Wera tool kit as well. I have a little tool kit which includes it and I keep it in my trunk. I swear I could pull an engine with it.

@Jody_VE5SAR Жыл бұрын

Nice job! For a little extra safety assurance and to hide the power wire, you might consider some 1/4" or 3/8" split-loom tubing and run all of the zip line in that. Just extra armor against abrasion, even though this frunk area isn't exactly as exposed to the elements like normal under-hood wiring.

@k6usy Жыл бұрын

Yep, loom all the things!

@Major_Thorn Жыл бұрын

Is really helped me plan out my power install for my own mobile rig. My issue has been that I want to add a few more things up to power than just my radio. However, I am going to also add some battery protection so I don't run down my car battery.

@Screamingtut Жыл бұрын

really good Josh, I got to put my DMR radio & my 891 in my Kia Forte. just got to wait and not deal with the cold/snow.

@HamRadioCrashCourse Жыл бұрын

Thank you!

@TK-Radio-Adventures Жыл бұрын

I got a 21 f150 xlt, 4 radios and emergency lights. 2 30amp fuse blocks and 2 radios ran straight to the battery with a 7 wire, trailer wire, all ran through the same hole on my fire wall. It wasn't too bad when I broke out the dawn dish soap to ease the wire through the fire wall.

@EndoliteM4trix 7 ай бұрын

Found it - nevermind. Ignore my other comment. i'd delete it if i remembered the oroginal comment I left it on. I cannot tell you how invaluable this is. thank you for being the pioneer on this car.

@FindLiberty Жыл бұрын

I glad the truck's airbags did not deploy when you hit the Xmit key.... GOOD JOB

@casevideo9880 Жыл бұрын

Nice job. It is a pain to pull wire sometimes, but worth it…

@amateursandairwaves Жыл бұрын

Clean install man! That ID5100 looks nice there

@HamRadioCrashCourse Жыл бұрын

Thanks! Couldn’t have done it without you! 🤣

@BenButler1 Жыл бұрын

That is a slick antenna mount.

@robertmeyer4744 Жыл бұрын

That great. most trucks are easy to do. you could even do a LiFePO4 battery or add that later as back up battery. them mounts are a standard. business radios use same mount. I got some VHF LOW ones. 73's

@johnsonbrandon807 Жыл бұрын

I enjoyed the in install of your radio and how you did it

@HamRadioCrashCourse Жыл бұрын

Thank you!

@TahitiChris Жыл бұрын

As a suggestion, I have an ICOM IC-2730a installed in my Tesla Model 3. I use a Jackery 500 to power my radio. I like having the radio power independent of the car's 12-volt system.

@stevehorvat69 Жыл бұрын

Nice video and truck. Keep an eye on the gaskets for that light and mount. I have a 2015 Platinum and had problems with condensation and musty smells inside the truck. Turned out that the light was leaking. Love the look of this mount but the price and the drilling are a deal buster. Almost thinking of getting a backrack instead for that price and mounting the antenna on it instead.

@cecilmadden 5 ай бұрын

Thanks. I plan to install the same radio in my 2018 F150 ic truck. I think I'll use the dual antenna mount. The mount is a sticker shock. Hence my delay.

@ebreevephoto Жыл бұрын

Great install. I know you have a grommet around the base plate, but a little rust inhibitor inside those drilled holes will go a long way for peace of mind.

@grahamhelton5395 8 ай бұрын

LTT screwdriver action. nice 👍

@AlphaCharlieFour Жыл бұрын

Great video! Thanks for the shout out -AC4AG

@HamRadioCrashCourse Жыл бұрын

Thanks for the help!

@thuff3207 Жыл бұрын

Nice install and good video to see how you did it, so thank you. I wonder if your bracket can be modified for other antennas.

@richardadams6853 Жыл бұрын

I just bought a 2021 F150 Lariat and have to re-install my Icom ID-5100 in this one. I had the rig in the center console on my 2011 Lariat. Because of all the wires under the seat I can't find a large enough area. Luckily, as you said, the electrical boxes, grommets and center console are both the same. Just have to wait for the weather to go above freezing as this truck doesn't fit in my garage. If that company that makes the roof bracket would cut the price to $150 they would sell 3x as many. Crazy expensive.

@ronleblanc9832 Жыл бұрын

nice install that's a super antenna mount think you should have got the duel. mount there's always that second radio

@lblerg 9 күн бұрын

I'm following your lead on this. Just ordered one, even shipping was $$$ from those guys. Is it overbuilt at all? Yes, seems very overpriced. Maybe $200 looks fair, we'll see when it arrives. Thanks for the vid!

@Steve_A71 Жыл бұрын

That is the sole reason that I am not getting this mount. $350 is absolutely overpriced for what it does.

@W9TSB Жыл бұрын

You should get the Signal Stuff Signal Stalk. I really like mine I have on my Ford Ranger.

@freik98682 Жыл бұрын

Sweet Antenna mount. I did choke when I saw the price. 🤣Yes you should have gotten the double mount version.

@sonnywillier9419 Жыл бұрын

Nice. I did the same Bullet Proof Diesel mount on my '22 F150. I drilled those 2 holes the first day I had my truck! Painfull to do, but that is a great mount. I wish I would have done the dual mount. I wasn't sure the placement of the dual mount would work with my kayak mounts on the topper. Like that other install video you mentioned, I ran power on the passenger side to the leftover space behind the rear seat. I added a 3-way anteanna switch and power distribution there. So far I only have one GMRS radio in, but plan on having GMRS, UHF/VHF, and CB (for Jeep events). I think I've given up on the wireless charging pad (its pretty useless) in the center console, and am probably going to mount the radio head in that area so it can hide away when not in use. i just haven't been able to commit to that yet. GMRS is a Midland that only needs the mic visible when in use and just lays in the map pocket on the side of the console. Enjoy that truck!

@HamRadioCrashCourse Жыл бұрын

How’d you run the power through the passenger side?

@sonnywillier9419 Жыл бұрын

@@HamRadioCrashCourse My Powerboost has a nice big rubber grommet on the passenger side. So just poked a hole in it and pulled the wire in by the fuse panel inside. And the 12v battery is right there like a “normal” truck.

@TK4619 Жыл бұрын

Nice clean install, just curious if that 12v battery runs down from accidentally leaving the radio on, will it effect the drive system ?

@Steve_A71 Жыл бұрын

As a ford technician that just completed working on a lighting, to get to everything under the frunk, it has to come out. So make sure the mount is able to be quick disconnected to allow the removal.

@HamRadioCrashCourse Жыл бұрын

I saw Hoovies video showing under the frunk... 😬

@the1spyderryder Жыл бұрын

Attach a string to a washer and use a magnet to lead the washer to whete you can get to it.

@kennydimaggio1087 6 ай бұрын

This is kg7 iux in Arizona. I just got done watching your video and loved it. I also have the Icom id-5100a. My question is with your Lido mount. I just recently bought the Uniden SDS200 Digital Police Scanner and as you can imagine I'm having trouble mounting it in my 2019 F-350. I was thinking about the Lido amount do you think it's strong enough to hold the scanner or do you think that it will droop eventually?

@Blake-jl8lh Жыл бұрын

That's a slick mount, perhaps is overpriced but it's certainly cool

@WG5Xradio Жыл бұрын

Dang Josh, that is pricey. Too late now, but did you check the Larson electronics mounts? Very similar, but slightly different at half the price, and no drilling. Yours does have the advantage oof being able to put the coax inside the truck behind the light. I ran my coax along the window, then down to a grommet that is behind the rear seat, then along the channel by the door. I'll try to make a video in a week or two when I get back in town.

@ThePueo Жыл бұрын

Thanks for the video. I don't like wiring the radio directly to the battery without a way to make sure it the radio turns off when I turn off the truck. After I discharged my 12 V battery a few times in my (now replaced by my 2023 Lightning) 1995 T100, I added a relay that disconnected the high current 12 connection when the truck was off. Surely there is such a wire somewhere.

@phildurall7466 Жыл бұрын

Sweet install Josh! Look forward to the HF addition Sir! 73 - KF6IF

@pedrocatalan9814 Жыл бұрын

Did a similar install on my hybrid. Also small battery, and yes, easy to kill them. I installed a power relay so that distrito box only powers up when vehicle powered on. That will save you from having the radio deplete the 12v and needing to call your wife for a boost. Ask me how I know…😂😂😂

@hamgearcanada Жыл бұрын

hello. Interesting to see your install, as its becoming harder and harder to get through the firewall. What gauge wire did you use from your battery to your fuse box? I've seen 8 awg recommended for multiple radios. thanks!

@tulrich2 Жыл бұрын

Nice install! Out of curiosity, why did you use a power distro block like that instead of something like a RigRunner?

@IdahomeStrongman Жыл бұрын

I need to find one for my Tacoma

@Jim-xs2fl Жыл бұрын

Just wondering if you have noticed any RF getting into or affecting the electronics or truck functions / controls ?

@AdamSWL Жыл бұрын

You should have bought the dual NMO mount! You will regret it Josh! It is an excellent antenna mounting solution for that vehicle which is worth the cost in my opinion. Enjoy your new truck!

@HamRadioCrashCourse Жыл бұрын

I feel that!

@michaelvitucci6188 Ай бұрын

Wondering what kind of crimper you used? It doesn't look like you used any solder on the ring connectors?

@k6usy Жыл бұрын

Icom sells a first party mobile speaker that is not cheap but it sounds amazing and it’s not made out of plastic.

@HamRadioCrashCourse Жыл бұрын

Thanks for that tip!

@k6usy Жыл бұрын

@@HamRadioCrashCourse Icom SP-35

@WG5Xradio Жыл бұрын

One more thing. I have a tool that looks kinda like a screwdriver, but it is hollow. You shove it through the grommet, then push the wire through the tool, the retrieve the tool. Easier than it sounds. It is just called a firewall grommet wire insertion tool.

@HamRadioCrashCourse Жыл бұрын

I would LOVE to use that, there is no way to get my arm into the gromet area on the other side.

@bb_37 Жыл бұрын

Make or model of that tool?

@WG5Xradio Жыл бұрын

@@bb_37 You tube won't let you post links, but here is the Amazon description. There are cheaper ones available, but I liked this one . GoolRC Wire Insertion Tool Set Wire Harness Special Lead Tool Laser Tools OEM:7618

@DarkShadowCustoms Жыл бұрын

Nice install job. I am surprised at the amount of extra room behind the panels of the front trunk.

@mikemandell132 Жыл бұрын

Did you have a 5100 in a vehicle before? My favorite radio, but I'm pretty sure you know that if left in hot sun the screen will eventually fade. You'll need a windshield sunscreen, a cover for the head or something. My solution was (after several years) to move the 5100 to the shack and use a 4100 in the car. Yeah, not as good a radio, but it's OK with the heat over time.

@hjelliottca 2 ай бұрын

That is a very neat mount idea. Thank you for the comment that you made saying the mount has a gasket because as you were tightening the screws on the light, that was the question that popped into my head. I have a Maverick and I'm trying to figure the best way to put an antenna on the top because I don't want the mag mount like I did on the last car, and my wife tells me I'm "not putting a hole in the roof of the new truck." There's no way for me to mount it to the bed the way the bed is designed. I don't like hood lip mounts and I don't really want a glass mount antenna. I may just punch the hole anyway and beg forgiveness? Thanks for your video! de VO1ET

@TheGeekiestGuy 10 ай бұрын

Edit- i saw you have an LTT driver. If you ever go with that kinda merch, I'd be down for an HRCC screwdriver. I just watched your video on plans for the communal bookcase. I say do a long form video on that. You know we'll watch it, bud. 🤙🏽

@HamRadioCrashCourse 10 ай бұрын

Thanks! I might do that!

@KC1PBW Жыл бұрын

I did something similar when I bought my car. Pulled in the driveway and started pulling panels to mount my radio

@jamess1787 Жыл бұрын

Josh, Tell me about the AF60 on your roof!!!

@roberthunt4434 6 ай бұрын

Very helpful video. I’m new to ham to wanting to install a mobile radio in my ram truck. What gauge wire did you use for the power and ground?

@HamRadioCrashCourse 6 ай бұрын

16 gauge.

@StephenWhiting-WI Жыл бұрын

Bummer you have to take out a loan for that awesome antenna mount!!

@Aimsport-video 3 ай бұрын

Which soon you may not be able to use in Pennsylvania, even pulled over if the engine is running.

@kc5cnt Жыл бұрын

Very nice. Might have to get that antenna mount for my truck. Good job, Josh.

@HamRadioCrashCourse Жыл бұрын

It’s a great mount. Expressive, but very good.

@bb_37 Жыл бұрын

@@HamRadioCrashCourse Umm...expensive?

@1originaloutlaw675 Жыл бұрын

Great video.

@iamjasonwilkins Жыл бұрын

Was there a gasket or some sort of sealant on the mount to keep water from seeping in to the body of the truck?

@HamRadioCrashCourse Жыл бұрын

Yes there is.

@chublez Жыл бұрын

So much hesitation from everyone to drill these holes always. Just do a simple NMO mount center roof guys(I know this ones got glass). This mount costs more than the holes gonna devalue the truck and the kiddos y'all let rampage through yer vehicles devalue them more also.

@bb_37 Жыл бұрын

Nice install. I sent a link to your video to an installation guru I know and he was intrigued since he hasn't worked on a Lightning yet. There was a metal bar that you slipped in behind the opening. That metal bar had screw threads in it that lined up with the holes you drilled. Correct? Was that metal bar stainless steel or plain steel? I think you said the screws were stainless steel. See where I'm going? Bare aluminum on bare steel over time might be a problem.

@HamRadioCrashCourse Жыл бұрын

Hmmmmm. Good point. This is the Diesel power mount. They have to know of that issue. The bar was very light with that said.

@DrivinwithJoe Жыл бұрын

I hope your truck is quieter than mine. 2017 Tacoma and it pukes so much rf that I can’t get on 2m when the the ignition is on. I’ll get it figured out eventually. But hope you have no problems.

@HamRadioCrashCourse Жыл бұрын

It’s pretty rf quiet.

@spencer3752 Жыл бұрын

Nice install! I'm wondering, could I use the the 120V household outlet instead if I wanted to avoid wiring to the battery? In the ICE F150 with Pro Power, the outlet is rated for 400W -- I think 2KW/20Amps in the lightning or something like that.

@HamRadioCrashCourse Жыл бұрын

You’d have to have a power supply to run off that 120v, but yes.

@anonymous_friend Жыл бұрын

Not sure I would be an early adopter of electric trucks. Hope it stands the test of time given the investment.

@thedoobie1 Жыл бұрын

Great video! Did you consider a Power Pole PD box like a RIGrunner? If you did, why did you decide against it?

@HamRadioCrashCourse Жыл бұрын

I never considered it. But I will take a look.

@derekvargason Жыл бұрын

Do they make these for all make and models of new trucks!?!? I have a 2020 Chevy Silverado 2500 and would love this

@HamRadioCrashCourse Жыл бұрын

Yes!!

@Matt-KG7JQH Жыл бұрын

Curious why you went with the 5100... Seems like you hinted at a new ICOM coming soon in a previous livestream.

@HamRadioCrashCourse Жыл бұрын

I bought it used and wanted to try it. :)

@ubergeek318 Жыл бұрын

Thats is the same power distribution block I reccomend.

@HamRadioCrashCourse Жыл бұрын

I'm glad I got a good one!

@michaelt.9372 6 ай бұрын

If you remove the mount, are the drilled holes visible when the brake light is returned to stock?

@HamRadioCrashCourse 6 ай бұрын

Since I haven’t taken it off I have no idea. Call the company.

@Sonicgott 3 ай бұрын

Looks like adding a GMRS radio to my car might be a bit trickier than expected...

@craigandersen2476 6 ай бұрын

When you do this install be sure to avoid the controls and tracks for the sunroof.

@RichardHopkinsLobosSolos Жыл бұрын

I have a question. How did you mount an antenna on the X-Terra? I ask because I'm running a mag mount on my 2008.

@HamRadioCrashCourse Жыл бұрын

I’ve mounted to the roof rack and a behind tail light mount.

@Burkey612 Жыл бұрын

Josh, Did you ever manage to get the SWR down on this setup?

@HamRadioCrashCourse Жыл бұрын

Different antenna was the trick. See my recent mobile antenna testing videos. 👍

@stargazer7644 5 ай бұрын

Why didn't you just hook the negative to the battery terminal the same way you did the positive?

@WU3Shamradio 7 ай бұрын

@hamradiocrashcourse How did you get the lido in the seat bolt up front??? Did you have to do any thing to the seat bolt "beauty cover" to get the LIdo to fit? I was looking at the same mount however lido told me it doent fir the F150 non lightning

@HamRadioCrashCourse 7 ай бұрын

I loosened the seatbolt and shoved the metal foot base of the mount under the seat rail as hard as I could. There is a depression that the foot will actually slide into.

@DARTHDANSAN Жыл бұрын

Off topic josh can you recommend me a whip antenna for yeasu ft-891 to set up for military back pack set up

@HamRadioCrashCourse Жыл бұрын

Like a flexible whip or telescopic?

@trumpdonald6911 Жыл бұрын

Beach Blvd to the 91 west.

@HamRadioCrashCourse Жыл бұрын

Yep

@ThePsychoghost Жыл бұрын

Hey friend! What's the name of that cable that goes in the audio jacks of your radio and computer so you can broadcast things like zello to your physical radios?

@HamRadioCrashCourse Жыл бұрын

It would depend on the radio, some take USB :D

@Remigius0815 Жыл бұрын

Upper Side Band

@bootedguy Жыл бұрын

I've always heard it as: "There is nothing more permanent than a temporary solution."

@HamRadioCrashCourse Жыл бұрын

That’s even better.

@Bugkiller991 Жыл бұрын

How big of a pain was it to get all the electronics working properly after disconnecting the battery?

@HamRadioCrashCourse Жыл бұрын

No problem at all. Everything just worked.

@stahpit1971 5 ай бұрын

Beautiful install but the mount costs many beans.

@jackK5FIT Жыл бұрын

I cringed when you drilled the two holes. Not sure I would have the guts to do that. Nice install though. I like the color of the truck too. Jack K5FIT

@KS-uh3qs 4 ай бұрын

Why not just pull out the trunk liner and make it easier to work in and around that area? Also, are you concerned about drilling through the firewall and installing a grommet rather than the routing you chose?