Install 2012-2015 Mercedes E Class W212 NTG4.5 Android screen

No video

Install 2012-2015 Mercedes E Class W212 NTG4.5 Android screen

Рет қаралды 38,113

Күн бұрын

This device is for the 2012-2015 Mercedes Benz W212 E-Class with NTG4.5 system. We currently sell Android devices with Qualcomm Snapdragon 662 and 685 chips.
Please note that if your NTG4.5 does not have an AUX menu, you will need to activate the stock AUX first or you will not get Android sound.
If your car uses an optical cable for transmission, please connect the cable correctly to the same socket location on the Android harness. Also, if your car has an AMI connector, plug the AMI cable into that connector and the other end into the ‘Audio Out’ socket on the ISO cable to get Android sound.
Here is the link to buy the 662 chip:
www.amazon.com....
Here is the link to buy the 685 chip:
www.amazon.com...
If you have any questions, please contact our after-sales service team:
service@yeehung.cn

Пікірлер: 45

@incartechie 8 ай бұрын

Nice install - we also install the same screens over here in the UK!

@fzimmi9793 Ай бұрын

Hallo. Was kann ich machen wen das Gerät kein Ton abspielt.

@pempcar Ай бұрын

Friend, if the original car NTG4.0 OEM system. If you buy an Android device with NTG4.0's system, make sure you connect all the wiring harnesses, then please select AUX manually to get the sound. If the original car is NTG4.5 system, also make sure that the fiber optic, AMI auxiliary cable is connected correctly as well as whether to check if the OEM has an AUX menu, no menu please must be activated in order to get sound. Hope this helps!

@marciofilho7046 10 ай бұрын

Hello friends, I bought a multimedia with you, I only now dedicated myself to installing it. everything works perfect, however the screen and resolution to view the car's original system is very large, the camera and other functions are included. However, the input resolution is not matching the new screen. how to fix this? Could you give some guidance? Thank you very much in advance

@pempcar 10 ай бұрын

You can choose another resolution to fit it in the settings. Settings Path: Settings/factory settings/pass 190627/car display Please select other options until the OEM information is normal.below link can help you. kzfaq.info/get/bejne/h9eagbpyr-C6fJ8.html

@seyit5111 2 ай бұрын

My center Controller doesn‘t Work the Control thing in front of the armrest and there is no audio when i Connect with CarPlay(is that maybe cause i didn‘t Connect aux and Audio Output )

@pempcar 2 ай бұрын

Dear, If your car has an AUX or AMI port, be sure to use an AMI adapter to connect the YEEHUNG audio out audio output.

@user-qe5ot9gc6i 29 күн бұрын

انا من الاردن حل توصلي هاذ مسجل سيارتي مرسيدس بنز 2000 C موديل 2012

@user-qe5ot9gc6i 29 күн бұрын

❤❤❤❤

@Sen11r Жыл бұрын

Do you have any screens that use MOST fiber optic for audio signal instead of aux? Thanks

@pempcar Жыл бұрын

Sorry, we have not this model's MOST fiber optic. it only get the sound via OEM aux input.

@sabedinserifi9213 Жыл бұрын

hello, I bought a stereo for a Mercedes e class 2015 and I can't find the code for the factory installation, I tried the code 190627 but it doesn't work, can you help me because I can't get sound at all, thank you

@pempcar Жыл бұрын

if your product not from Yeehung, the password you try the 1314

@pempcar Жыл бұрын

Dear Sabedin, please contact our after-sale team: service@yeehung.cn Please let them know your purchase order number in your email. thanks

@user-qt1tr5ej2m 2 ай бұрын

Hi, If audio is crackly, can it be ground cable?

@pempcar 2 ай бұрын

Not sure, it may be a ground isolation problem.

@user-qt1tr5ej2m 3 ай бұрын

Hi, Do you know why audio is crackly over Aux?

@pempcar 3 ай бұрын

If you turn down the sound on the android, does it work?

@user-qt1tr5ej2m 3 ай бұрын

@@pempcar no, it is still crackly. Normal Mercedes Audio is fine.

@pempcar 3 ай бұрын

@@user-qt1tr5ej2m Android sound is input from OEM AUX in, the sound quality must not be as good as OEM host. You can record the sound to send it to the aftermarket team at service@yeehung.cn

@maximussmirnoff 3 ай бұрын

@@pempcar Would appreciate a lot if you could say that the audio from carplay is the same quality as from bluetooth OEM commander. Thank you

@pempcar 3 ай бұрын

@@maximussmirnoff CarPlay sound is going to the OEM radio through the AUX IN channel, so it's worse than oem Bluetooth.

@kevindavid8619 Жыл бұрын

What are the 2 usb ports on the passenger side for?

@pempcar Жыл бұрын

Read U disk video or music. You can also charge your phone.

@user-sd1zb5nz1k 8 ай бұрын

Приветствую, подскажи пожалуйста я сегодня тоже установил данный девайс но у меня 4.5 нтг, у меня что-то звука из андроида нет совсем, аукс в команде активирован выбран как источник звука но всё равно нет звука, не в курсе в чем может быть проблема?

@pempcar 8 ай бұрын

Вы можете попробовать установить ручной режим AUX в заводских настройках.

@user-sd1zb5nz1k 8 ай бұрын

@@pempcar у меня андроид 12 в новой оболочке, там нет таких настроек просто🤔

@user-sd1zb5nz1k 8 ай бұрын

@@pempcar я покупал данный андроид у продавца Wandefoo может быть он мне не объяснил просто?

@pempcar 8 ай бұрын

@@user-sd1zb5nz1k Пожалуйста, отправьте номер вашего заказа на покупку по электронной почте нашей группы послепродажного обслуживания: Service@yeehung.cn.

@bmwcoding.benzcoding.homepage Жыл бұрын

4:57 Where can I buy the stick I used at this time?

@pempcar Жыл бұрын

You can search for the installation tool on the purchase site.

@bmwcoding.benzcoding.homepage Жыл бұрын

@@pempcar What should I search for? Can you tell me the name?

@pempcar Жыл бұрын

@@bmwcoding.benzcoding.homepage Car threading wiring puller tool

@bmwcoding.benzcoding.homepage Жыл бұрын

@@pempcar Thank you. I found it

@zdenkoraic Жыл бұрын

Is it possible to atach factory gps antena to android?

@pempcar Жыл бұрын

Your idea is great, but you will need to buy a GPS antenna adapter to adapt it.

@willroeder6462 2 жыл бұрын

Do you have this for 2016 W212 E400

@pempcar 2 жыл бұрын

Please send a photo of your original display to our technical department at service@yeehung.cn, and we will give you a positive answer. thanks

@johnparkerzabala Ай бұрын

Any installer in nyc?

@pempcar Ай бұрын

I suggest you install it yourself based on the video. When encountering problems, you can pause to contact our after-sales service team（Service@yeehung.cn). I am sure you can succeed.

@likpoi5284 Жыл бұрын

whats the first BGM name？？？

@Aliyayla-ix5vy 2 ай бұрын

How can I return to factory settings, the screen is locked, can you help me, brother, 12.3 inch koason

@pempcar 2 ай бұрын

You can restore the factory settings by clicking Recovery in the System info menu. If touch is not available, you can try using a mouse plugged into the USB port and you will surely be able to select it successfully.